| 1 |
1 |
Chair writing cushion\n\nM & L for removing unserviceable/ broken Rear leg from chair writing cushioned (FD-1107) and supply and fix new rear leg as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
80 |
Each |
| 2 |
2 |
M & L for removing unserviceable/ broken Front leg chair writing (FD-1107) and supply and fix new front leg as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
80 |
Each |
| 3 |
3 |
M & L for removing unserviceable/ broken side/front rail chair writing (FD-1107) and supply and fix new Side rail as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
100 |
Each |
| 4 |
4 |
M&L for removing unserviceable seat & back chair writing (FD-1107) and supply and fix new seat & back consisting of 6mm plywood commercial, 40/32 Density cool foam duly covered with Rexin Cloth of best quality as directed. Seat & Back shall be upholstered complete as specified. |
|
100 |
Each |
| 5 |
5 |
Chair dining\n\nM & L for removing unserviceable/ broken Rear leg from chair dining (FD-1105/279) and supply and fix new rear leg as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
250 |
Each |
| 6 |
6 |
M & L for removing unserviceable/ broken Front leg from chair dining (FD-1105/279) and supply and fix new front leg as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
250 |
Each |
| 7 |
7 |
M & L for removing unserviceable/ broken Rear/front/side rail from chair dining (FD-1105/279) and supply and fix new Rear/front/side rail as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
200 |
Each |
| 8 |
8 |
M & L for removing unserviceable/ broken Stiffener from chair dining (FD-1105/279) and supply and fix new Stiffener as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
200 |
Each |
| 9 |
9 |
M & L for removing unserviceable/ broken Back rest from chair dining (FD-1105/279) and supply and fix new Back rest as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
200 |
Each |
| 10 |
10 |
Removing the existing cane from chair dining (FD-1105/279) and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as directed. |
|
1500 |
Each |
| 11 |
11 |
Chair easy\n\nM & L for removing unserviceable/ broken Rear leg from chair easy (FD-1108/229) and supply and fix new rear leg as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
150 |
Each |
| 12 |
12 |
M & L for removing unserviceable/ broken Front leg from chair easy (FD-1108/229) and supply and fix new front leg as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
150 |
Each |
| 13 |
13 |
M & L for removing unserviceable/ broken arms from chair easy (FD-1108/229) and supply and fix new arms as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
150 |
Each |
| 14 |
14 |
M & L for removing unserviceable/ broken front/back/Side rail of seat & back from chair easy (FD-1108/229) and supply and fix new front/back/Side rail of seat as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
150 |
Each |
| 15 |
15 |
Removing the existing cane from seat & back of the chair from chair easy (FD-1108/229) and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as directed. |
|
200 |
Each |
| 16 |
16 |
M & L for removing unserviceable/ broken Rear leg from chair easy cushioned (FD-358) and supply and fix new rear leg as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
80 |
Each |
| 17 |
17 |
M & L for removing unserviceable/ broken Front leg chair easy (FD-358) and supply and fix new front leg as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
80 |
Each |
| 18 |
18 |
M & L for removing unserviceable/ broken side/front rail chair easy (FD-358) and supply and fix new Side rail as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
50 |
Each |
| 19 |
19 |
M&L for removing unserviceable seat & back chair easy (FD-358)and supply and fix new seat & back consisting of 6mm plywood commercial, 40/32 Density cool foam duly covered with Rexin Cloth of best quality as directed. Seat & Back shall be upholstered complete as specified. |
|
50 |
Each |
| 20 |
20 |
Chair writing\n\nM & L for removing unserviceable/ broken Rear leg from chair writing (FD-202/250/280) and supply and fix new rear leg as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
70 |
Each |
| 21 |
21 |
M & L for removing unserviceable/ broken Front leg from chair writing (FD-202/250/280) and supply and fix new front leg as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
70 |
Each |
| 22 |
22 |
M & L for removing unserviceable/ broken Rear/front/Side rail from chair writing (FD-202/250/280) and supply and fix new Rear/front/Side rail as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
70 |
Each |
| 23 |
23 |
M & L for removing unserviceable/ broken arms from chair writing (FD-202/250/280) and supply and fix new arms as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
100 |
Each |
| 24 |
24 |
M & L for removing unserviceable/ broken Back rest from chair writing (FD-202/250/280) and supply and fix new Back rest as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
100 |
Each |
| 25 |
25 |
M & L for removing unserviceable/ broken Stiffener from chair writing (FD-202/250/280) and supply and fix new Stiffener as to match with the existing, made of shisham wood all as specified and shown on drawings. |
|
100 |
Each |
| 26 |
26 |
Removing the existing cane from seat & back of the chair from chair writing (FD-202/250/280) and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as directed. |
|
100 |
Each |
| 27 |
27 |
Sofa set 3/5 seater\n\nM&L for removing the old worn/torn out cushion from sofa set 3 seater FD-281 and tapesty cloth from seat and back of sofa and providing new cushion of 32 density cool foam of size 560 x 530x100mm thick including provision tapesty cloth of approved shade & quality (cost of tapestry cloth shall be more than Rs. 200/- per metre)all over a cover of lining cloth duly covered and stiched over the cushions complete all as directed. Make : sleepwell/kurlon. |
|
500 |
Set (10 Nos Cushion in each set |
| 28 |
28 |
Chair dinning cushion\n\nRemoving unserviceable Rear leg from chair dinning cushioned (FD/E6/MAP/10 (R) and supply and fix new rear leg made ofshisham wood as to match with the existing all as specified and shown on drawing. |
|
76 |
Each |
| 29 |
29 |
Removing unserviceable Front leg from chair dinning cushioned (FD/E6/MAP/10 (R) and supply and fix new front leg made of shisham wood as to match with the existing all as specified and shown on drawing. |
|
100 |
Each |
| 30 |
30 |
Removing unserviceable side/back/front rails of the seat from chair dinning cushioned (FD/E6/MAP/10 (R) and supply and fix new rails made of shisham wood as to match with the existing all as specified and shown on drawing. |
|
100 |
Each |
| 31 |
31 |
Removing unserviceable Stiffener from chair dinning cushioned (FD/E6/MAP/10 (R) and supply and fix new stiffener made of shisham wood as to match with the existing all as specified and shown on drawing. |
|
59 |
Each |
| 32 |
32 |
Removing the existing unserviceable latherite cloth with cushion from chair dinning cushioned (FD/E6/MAP/10 (R) and replace the same with new latherite cloth and cushion of appropriate size of 40/32 density cool foam all as specified and as directed. |
|
300 |
Each |
| 33 |
33 |
Bed plywood top\n\nM&L for removing unserviceable head board from bed plywood top (FD-245/246) and supply and fix new head board comprising of outer member made of shisham wood and internal frame made of cheer wood, covered both sides of head board with 3.5 mm thick OSTplywood and also to provide 12mm thick half cut teak wood beading all as specified and shown on drawing. |
|
35 |
Each |
| 34 |
34 |
M&L for removing unserviceable foot board from bed plywood top (FD-245/246) and supply and fix new foot board comprising of outer member made of shisham wood and internal frame made of cheer wood, covered both sides of foot board with 3.5 mm thick OST plywood and also to provide 12mm thick half cut teak wood beading all as specified and shown on drawing. |
|
34 |
Each |
| 35 |
35 |
M&L for removing unserviceable long rail from bed plywood top (FD-245/246) and supply and fix new long rail of size 90 x 35 mm of appropriate length made of shisham wood complete all as specified and shown on drawing. |
|
40 |
Each |
| 36 |
36 |
M&L for removing unserviceable stiffner from bed plywood top (FD-245/246) and supply and fix new stiffner of size 90 x 35 mm of appropriate length made of shisham wood complete all as specified and shown on drawing. |
|
40 |
Each |
| 37 |
37 |
Supply and fix wooden bracket made of shesham wood between the leg from bed plywood top \n(FD-245/246) and long rail of bed to prevent shaking of the bed as directed. |
|
150 |
Each |
| 38 |
38 |
M&L for removing unserviceable plywood from top of the bed from bed plywood top (FD-245/246) and supply and fix new top made of 12mm BWR phenol bonded commercial plywood with suitable screws all as specified and shown on drawing. Make : National/kitply/Greenply. |
|
160 |
Each |
| 39 |
39 |
Table Dining 06 Person\n\nRemoving the existing unserviceable leg from the Table dining for 06 persons and supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing FD-30/273 &239. |
|
80 |
Each |
| 40 |
40 |
Removing the existing unserviceable top rail (long/front) from Table dining for 06 person and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-30(M)/273&239. |
|
50 |
Each |
| 41 |
41 |
Removing the existing unserviceable top rail (short/side) Table dining for 06 person and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-30 (M)/273 & 239. |
|
45 |
Each |
| 42 |
42 |
Removing the existing unserviceable top from the Table dining for 06 person and supply and fix new one as to match with the existing made of 18mm thick teak face pre-laminated particles board one side laminated with 4mm thick teak wood beading duly french polish all as specified and shown on drawing \nFD-30(M)/273&239. |
|
65 |
Each |
| 43 |
43 |
Teapoy \n\nRemoving the existing unserviceable leg from the Teapoy and supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing FD-382/232 &278. |
|
150 |
Each |
| 44 |
44 |
Removing the existing unserviceable top rail (long/front) from Teapoy and supply and fix new rail made of shisham wood to match with the existing all as specified and shwon on drawing FD-382/232 & 278. |
|
115 |
Each |
| 45 |
45 |
Removing the existing unserviceable top rail (short/side) from Teapoy and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-382/232 & 278. |
|
125 |
Each |
| 46 |
46 |
Removing the existing unserviceable top from the Teapoy and supply and fix new one as to match with the existing made of 18mm thick teak face pre-laminated particle board one side laminated with 4mm thick teak wood beading duly french polish all as specified and shown on drawing FD-382/232&278. |
|
250 |
Each |
| 47 |
47 |
Table centre\n\nRemoving the existing unserviceable leg from the Table centre and supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing FD-274 & 235. |
|
80 |
Each |
| 48 |
48 |
Removing the existing unserviceable top rail (long/front) from Table centre and fix new rail made of shisham wood to match with the existing all as specified and shwon on drawing FD-274&275. |
|
40 |
Each |
| 49 |
49 |
Removing the existing unserviceable top rail (short/side) from the Table centre and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-274 & 235. |
|
40 |
Each |
| 50 |
50 |
Removing the existing unserviceable top from the Table centre and supply and fix new one as to match with the existing made of 18mm thick teak face pre-laminated particle board one side laminated particle board with 4mm thick teak wood beading duly french polish all as pecified and shown on drawing FD-274&235. |
|
60 |
Each |
| 51 |
51 |
Table peg\n\nRemoving the existing unserviceable leg from the Table peg and supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing FD-277 & 236/384. |
|
200 |
Each |
| 52 |
52 |
Removing the existing unserviceable top rail (short/side) from the Table peg and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-277 &236/384. |
|
150 |
Each |
| 53 |
53 |
Removing the existing unserviceable top rail (long/front) from Table peg and supply and fix new rail made of shisham wood to match with the existing all as specified and shwon on drawing FD-277 &236/384. |
|
150 |
Each |
| 54 |
54 |
Removing the existing unserviceable top from the Table peg and supply and fix new one as to match with the existing made of 18mm thick teak face pre-laminated particle board one side laminated particle board with 4mm thick teak wood beading duly french polish all as specified and shown on drawing FD-277&236/384. |
|
300 |
Each |
| 55 |
55 |
Table 900x600mm with drawer\n\nRemoving the existing unserviceable leg from the Table 900x600mm with drawer supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing FD- 283/41. |
|
65 |
Each |
| 56 |
56 |
Removing the existing unserviceable top rail (long/front) from Table 900x600mm with drawer and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-283/41. |
|
53 |
Each |
| 57 |
57 |
Removing the existing unserviceable top rail (short/side) from the Table 900x600mm with drawer and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD- 283/41. |
|
45 |
Each |
| 58 |
58 |
Removing the existing unserviceable side stiffener of table 900x600mm with drawer and without drawer and supply and fix new stiffener made of shisham wood to match with the existing all as specified and shown on drawing FD- 283 &284. |
|
99 |
Each |
| 59 |
59 |
Removing the existing unserviceable centre stiffener of Table 900x600mm with drawer and without drawer and supply and fix new stiffener made of shisham wood to match with the existing all as specified and shown on drawing FD- 283 &284. |
|
77 |
Each |
| 60 |
60 |
Removing the existing unserviceable top from the Table 900x600mm with drawer and supply and fix new one as to match with the existing made of 18mm thick pre-laminated particle board one side laminated with 4mm thick teak wood beading duly french polish all as specified and shown on drawing FD-283/41. |
|
40 |
Each |
| 61 |
61 |
Table 900x600mm without drawer\n\nRemoving the existing unserviceable top from the Table 900x600mm without drawer and supply and fix new one as to match with the existing made of 18mm thick pre-laminated particle board one side laminated with 4mm thick teak wood beading duly french polish all as specified and shown on drawing FD-284/55/42. |
|
60 |
Each |
| 62 |
62 |
Removing the existing unserviceable leg from the Table 900x600mm without drawer and supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing FD-284/55/42. |
|
95 |
Each |
| 63 |
63 |
Removing the existing unserviceable top rail (long/front) from Table 900x600mm without drawer and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-284/42. |
|
80 |
Each |
| 64 |
64 |
Removing the existing unserviceable top rail (short/side) from the Table 900x600mm without drawer and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD- 284/55/42. |
|
50 |
Each |
| 65 |
65 |
Table 1200x900x760mm\n\nRemoving the existing unserviceable leg from the Table 1200x900x760mm and supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing FD-273. |
|
30 |
Each |
| 66 |
66 |
Removing the existing unserviceable top rail (long/front) from Table 1200x900x760mm without drawer and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-273. |
|
15 |
Each |
| 67 |
67 |
Removing the existing unserviceable top rail (short/side) from the Table 1200x900x760mm and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD- 273. |
|
15 |
Each |
| 68 |
68 |
Removing the existing unserviceable top from the Table 1200x900x760mm and supply and fix new one as to match with the existing made of 18mm thick teak face pre-laminated particle board one side laminated with 4mm thick teak wood beading duly french polish all as specified and shown on drawing FD-273. |
|
35 |
Each |
| 69 |
69 |
Side board\n\nRemoving the existing unserviceable door shutters (both) of side board (FD-372) and supply and fix new door shutters (both) as to match with the existing, made of 18mm thick teak face Pre-laminated particle board exterior grade duly providing 6mm thick teak wood beading all round including all fittings and fixtures all as shown on drawing and as directed Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size and quality) (b) Hinges shall be 50mm of approved quality. |
|
15 |
Each |
| 70 |
70 |
Removing the existing unserviceable front portion of the drawer of side board (FD-372) and supply and fix new front portion of the drawer as to match with the existing made out of 18mm thick teak face Pre-laminated particle board with laminated finish including new knob all as specified and shown on drawing. |
|
80 |
Each |
| 71 |
71 |
Removing the exisiting unserviceable top from the side board (FD 372) and supply and fix new top as to match with the existing, made out of 18mm thick teak face Pre-laminated praticle board with laminated finish duly providing 4mm thick teak wood beading all round duly french polish all as specified and as shown on drawing. |
|
35 |
Each |
| 72 |
72 |
Removing the existing unserviceable plywood from sides (both) of side board (FD-372) supply and fix new 3.5mm thick one side teak face plywood on sides (both) as to match with the existing all as specified and shown on drawing |
|
40 |
Each |
| 73 |
73 |
Removing the existing unserviceable back of side board (FD 372) and supply and fix new back as to match with the existing , made out of 6mm thick commercial ply wood all as specified and shown on drawing |
|
35 |
Each |
| 74 |
74 |
Table writing\n\nRemoving existing unserviceable top of the table writing (FD-249&275) and supply and fix new top as to match with existing made out of 18mm thick pre-laminated particle board one side laminated finish duly providing 4mm thick teak wood beading all around duly french polish complete all as specified and shown of drawing |
|
45 |
Each |
| 75 |
75 |
Removing the existing unserviceable leg of the table writing (FD-249&275) and supply and fix the same with new one as to match with existing made out of shisham wood complete all as specified and shown on drawing |
|
30 |
Each |
| 76 |
76 |
Removing the existing unserviceable leg (short) of the table writing (FD-249&275) and supply and fix the same with new one as to match with existing made out of shisham wood complete all as specified and shown on drawing |
|
20 |
Each |
| 77 |
77 |
Removing the existing unserviceable side/bottom rail of the table writing (FD-279&275) and supply and fix the same with new one as to match with existing made out of shisham wood complete all as specified and shown on drawing |
|
15 |
Each |
| 78 |
78 |
Removing the existing unserviceable back of the table writing (FD-249&275) and supply and fix the same with new one as to match with existing made out of 6mm thick plywood commercial complete all as specified and shown on drawing |
|
25 |
Each |
| 79 |
79 |
Removing the existing unserviceable side of the table writing (FD-249&275) and supply and fix the same with new one as to match with existing made out of 18mm thick partical board one side laminated finish complete all as specified and shown on drawing |
|
15 |
Each |
| 80 |
80 |
Removing the existing unserviceble stiffner of the table writing (FD-249&275) and supply and fix the same with new one as to match with existing made out of shisham wood complete all as specified shown on drawing |
|
13 |
Each |
| 81 |
81 |
Removing the existing unserviceable drawer of the table writing (FD-249&275) and supply and fix the same with new one as to match with existing made out of 18mm thick partical board one side laminated finish including provision of knob compete all as specified and shown on drawing.\nNote:- Knob shall be aluminium anodised (Dark Brown) chromium plated of approvd size and quality. |
|
10 |
Each |
| 82 |
82 |
Removing the existing unserviceable cupboard complete of the table writing (FD-249&275) and supply and fix new cupboard complete made out of 18mm thick partical board one side teak face finish including 4mm teak wood beading on front side including fitting/fixtures complete all as specified and shwon on drawing. Note:- (a) Knob shall be aluminum anodized (dark brown chromium plated of approved size and quality).\n(b) Hinges shall be 50 mm of approved quality. |
|
25 |
Each |
| 83 |
83 |
Dressing Table Gents with mirror\n\nM & L for removing the existing unseviceable looking mirror from Dressing Table Gents with mirror (FD-230) and supply and fix new looking mirror of 5.5mm thick of appropriate size along with 6mm thick commercial plywood back of the mirror including minor repairs all as specified and shown on drawings.\nNote : Make of Mirror should be of Modiguard/St Gobain/Atul. |
|
165 |
Each |
| 84 |
84 |
Material and labour for removing the unserviceable drawers from the Dressing Table Gents with mirror (FD-230) and supply & fix new drawer made out of 12mm commercial plywood and front side made of 18mm thick prelaminated particle board one side laminated finish all as specified and shown on drawings |
|
300 |
Each |
| 85 |
85 |
Dressing Table Ladies with mirror\n\nM & L for removing the existing unseviceable looking mirror from Dressing Table Ladies with mirror (FD-251) and supply and fix new looking mirror of 5.5mm thick of appropriate size along with 6mm thick commercial plywood back of the mirror including minor repairs all as specified and shown on drawings.\nNote : Make of Mirror should be of Modiguard/St Gobain/Atul. |
|
40 |
Each |
| 86 |
86 |
Material and labour for removing the unserviceable drawers from the dressing Table Ladies with mirror (FD-251) and supply & fix new drawer made out of 18mm thick prelaminated particles board one side laminated finish all as specified and shown on drawing |
|
65 |
Each |
| 87 |
87 |
Book self open small wooden\n\nMaterial and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for the book self open small wooden all as specified and shown on drawing FD-1103. |
|
5 |
Each |
| 88 |
88 |
Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for the book case small wooden all as specified and shown on drawing FD-45(M). |
|
17 |
Each |
| 89 |
89 |
Almirah MU wooden\n\nMaterial and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for the Almirah MU wooden all as specified and shown on drawing FD-93(M). |
|
12 |
Each |
| 90 |
90 |
Chair School With Hand Board \n\nM&L for welding the broken frames (wherever required) with Gas welding complete all as specified (Welding to 25mm MS Tube all round will be considered as one point).FD/E6/MAP/05 |
|
80 |
Each |
| 91 |
91 |
M&L for removing the unserviceable one piece PVC seat & back and supply and fix new one piece PVC seat & back with steel screws and washers of appropriate size complete all as specified. Make : Supreme/Neelkamal. |
|
80 |
Each |
| 92 |
92 |
M&L for removing the unserviceable hand board and supply and fix new hand board made of 18 mm thick pre-laminated particle board with teak wood edging with steel screws of size 585mm x 300mm complete all as specified. |
|
80 |
Each |
| 93 |
93 |
M&L for removing unserviceable rubber shoes and supply and fix new PVC shoes of approved quality complete all as specified. |
|
320 |
Each |
| 94 |
94 |
M&L for preparing the steel surfaces smooth and painting by synthetic enamel paint Black colour all as specified. |
|
80 |
Each |
| 95 |
95 |
CHAIR DINNING POLY SEAT \n\nM&L for welding the broken frames (wherever required) with Gas welding complete all as specified (Welding to 19/20mm MS Tube all round will be considered as one point) |
|
60 |
Each |
| 96 |
96 |
M&L for removing the unserviceable poly seat and supply and fix new Poly seat with steel screws and washers of appropriate size complete all as specified |
|
60 |
Each |
| 97 |
97 |
M&L for removing unserviceable rubber shoes and supply and fix new PVC shoes of approved quality complete all as specified |
|
60 |
Each |
| 98 |
98 |
M&L for preparing the steel surfaces smooth and painting by synthetic enamel paint Black colour all as specified |
|
60 |
Each |
| 99 |
99 |
Hat Stand With Mirror\n\nMaterial and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for the Hat Stand With Mirror all as specified and shown on drawing M & L for removing the existing unseviceable looking mirror from Hat Stand (FD-233) and supply and fix new looking mirror of 5.5mm thick of appropriate size along with 4 mm thick commercial plywood back of the mirror including minor repairs all as specified and shown on drawings.\nNote : Make of Mirror should be of Modiguard/St Gobain/Atul. \n |
|
40 |
Each |
| 100 |
100 |
M&L for removing the unserviceable pegs and supply and fix new one piece of superrior qualitycomplete all as specified |
|
100 |
Each |
