| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Jan-202 | Amendments approved by MPSDP | Technical Bid | 18-02-2021 |
| Name of Work: SUPPLY OF RAW MATERIALS | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | RAW MATERIAL ITEMS REQUIRED FOR TRAINING PURPOSE\n | |||
| 2 | 2 | Servo 40 Engine oil | item1 | 1 | LTR. |
| 3 | 3 | Straight Shank Drill Ø 10.2mm\nSpecification:-MAKE- ADDISON | item2 | 1 | Nos. |
| 4 | 4 | MT Sleeve 1-2 | item3 | 1 | Nos. |
| 5 | 5 | Straight Shank HSS Rough End Mill Cutter Dia 16mm\nSpecification:-MAKE- ADDISON | item4 | 1 | Nos. |
| 6 | 6 | Straight Shank HSS Rough End Mill Cutter Dia 10mm\nSpecification:-MAKE- ADDISON | item5 | 1 | Nos. |
| 7 | 7 | HSS Top M 12X1.75\nSpecification:-MAKE- TOTEM (1U - 03 nos. ) | item6 | 1 | UNIT |
| 8 | 8 | Servo System 68\nSpecification:- | item7 | 1 | LTR. |
| 9 | 9 | HSS Tool (1/4”x4”) 6.35x101.60mm\nSpecification:-Miranda | item8 | 1 | Nos. |
| 10 | 10 | HSS Tool 2.38x12.70x101.60mm\nSpecification:-Miranda | item9 | 1 | Nos. |
| 11 | 11 | HSS Tool (5/8”x4)\nSpecification:-Miranda | item10 | 1 | Nos. |
| 12 | 12 | Drill Bit 11.5\nSpecification:-Miranda | item11 | 1 | Nos. |
| 13 | 13 | Drill Bit 15.5\nSpecification:-Miranda | item12 | 1 | Nos. |
| 14 | 14 | BDMS 63X102 mm | item13 | 1 | Nos. |
| 15 | 15 | BDMS 63X116 Mm | item14 | 1 | Nos. |
| 16 | 16 | BDMS 60X40 mm | item15 | 1 | Nos. |
| 17 | 17 | Emery Paper 5 meter (100 grit)\n | item16 | 1 | Nos. |
| 18 | 18 | Oil Stone (Rough + Fine) | item17 | 1 | Nos. |
| 19 | 19 | Emery Paper 120 grade | item18 | 1 | Nos. |
| 20 | 20 | Hydraulic oil\nSpecification:-Servo system 46 | item19 | 1 | ltr |
| 21 | 21 | Small Wiper Rubber\nSpecification:-Small rubber wiper | item20 | 1 | Nos. |
| 22 | 22 | Wheel flange Unit (200 X20 X31.75mm) | item21 | 1 | set |
| 23 | 23 | Hand Brush (4Inch) Big | item22 | 1 | Nos |
| 24 | 24 | Elbow length Rubber Gloves for chip removal (Silicon) | item23 | 1 | Nos |
| 25 | 25 | Polycarbonate Bar 65x100mm | item24 | 1 | Nos |
| 26 | 26 | Aluminium Grade 6061 /6082/ 677 102x102x32mm\nSpecification:-Aluminium grade 6061 or 6082(HE30) or 677 which is having good machinability\nSize: 102 x102 x 32mm | item25 | 1 | Nos |
| 27 | 27 | Bland Brush (4inch big)\n | item26 | 1 | Nos |
| 28 | 28 | Isopropyl Alcohol 1ltr bottle\nSpecification:-Cleaning Alcohol | item27 | 1 | ltr |
| 29 | 29 | Acetone 1 ltr bottle\nSpecification:-Cleaning solution | item28 | 1 | ltr |
| 30 | 30 | FLITE Men's Slip on Flip Flops Thong Sandals Slippers size(6,7,8,9,10)(for CMM & Metrology Labs) | item29 | 1 | Pair |
| 31 | 31 | Soft Hand brush for cleaning CMM (One Big and One small) | item30 | 1 | Nos |
| 32 | 32 | Doosl Wireless Presenter, RF 2.4GHz Powerpoint Clicker Presentation Remote Control Pen. | item31 | 1 | Nos |
| 33 | 33 | Wall Mounting Digital Hygrometer Thermometer Humidity Meter With Clock Lcd Display | item32 | 1 | Nos |
| 34 | 34 | Hand Brush 2'' | item33 | 1 | Nos |
| 35 | 35 | Polycarbonate plastic bar Dia 63 x 100 mm length | item34 | 1 | Nos |
| 36 | 36 | Polycarbonate plastic block 102 x 102 x 32 mm | item35 | 1 | Nos |
| 37 | 37 | Aluminium grade 3003 Blocks 102 x102 x 32 mm | item36 | 1 | Nos |
| 38 | 38 | Center Drill (BS No 4 HSS)1/8 X5/16\nSpecification:-MAKE- ADDISON | item37 | 1 | Nos. |
| 39 | 39 | Cutting oil (Blaso) for DMG Mori | item38 | 1 | Nos. |
| 40 | 40 | Dust Pan | item39 | 1 | Nos. |
| 41 | 41 | Teflon Hammer | item40 | 1 | Nos. |
| 42 | 42 | Deburring tool | item41 | 1 | Nos. |
| 43 | 43 | Drill Ø7mm (HSS) | item42 | 1 | Nos. |
| 44 | 44 | Drill Ø8mm (HSS) | item43 | 1 | Nos. |
| 45 | 45 | Drill Ø7.5mm (HSS) | item44 | 1 | Nos. |
| 46 | 46 | Drill Ø9.5mm (HSS) | item45 | 1 | Nos. |
| 47 | 47 | Reamer 10 mm (HSS) | item46 | 1 | Nos. |
| 48 | 48 | End mill cutter inserted ?16 mm\nwith 10 nos. suitable iso inserts\nSpecification:-Overall Length:120-150mm\nMinimum No of inserts:2\nNo of flutes: 2\nOther specification standard as per iso specifications\nMake: Ceratizit, taguetac, etc. | item47 | 1 | Nos. |
| 49 | 49 | End mill cutter inserted ?20 mm\nwith 10 nos. suitable iso inserts\nSpecification:-Overall Length:120-150mm\nMinimum No of inserts:2\nNo of flutes: 2\nOther specification standard as per iso specifications\nMake: Ceratizit, taguetac, etc. | item48 | 1 | Nos. |
| 50 | 50 | Otovon ESD Anti-Static Top Fit Finger PU Coated Hand Gloves, Size - S | item49 | 1 | Nos |
| 51 | 51 | Apron Shifting Gear\nSpecification:-Double ended\n 45*24 teeth | item50 | 1 | Nos |
| 52 | 52 | Aluminium \n'Specification:-Grade 6061 \n60*60*150 mm | item51 | 1 | Nos |
| 53 | 53 | Die steel \nSpecification:-100*100*5 mm | item52 | 1 | Nos |
| 54 | 54 | Die Steel\n Specification:-100*100*50 mm | item53 | 1 | Nos |
| 55 | 55 | Emery Paper Very Fine ( grit) 320 Grade for MS | item54 | 1 | Nos |
| 56 | 56 | BDMS 50x50x100mm | item55 | 1 | Nos |
| 57 | 57 | BDMS 50x50x50mm | item56 | 1 | Nos |
| 58 | 58 | HSS DRILL Ø 11.8mm\nSpecification:-MAKE- ADDISON | item57 | 1 | Nos |
| 59 | 59 | DRILL DRIFT | item58 | 1 | Nos |
| 60 | 60 | TAP WRINCH HANDLE Specification:-( FOR M12 TAP TANG FITTING ) | item59 | 1 | Nos |
| 61 | 61 | Taper sleeve 1-2 | item60 | 1 | Nos |
| 62 | 62 | Taper sleeve 2-3 | item61 | 1 | Nos |
| 63 | 63 | Taper sleeve 3-4 | item62 | 1 | Nos |
| 64 | 64 | M20 X 2 Go and no go gauge Specification:-Thread ring gauge | item63 | 1 | Nos |
| 65 | 65 | Plastic tub (tagadi) | item64 | 1 | Nos |
| 66 | 66 | Headstock gear oil\nSpecification:-Servo system 68 | item65 | 1 | Liter |
| 67 | 67 | Knurling Tool (cross knurl) (left and right)\nSpecification:-Medium pitch ½” Square shank | item66 | 1 | Nos |
| 68 | 68 | HSS DRILL Ø 6mm\nSpecification:-MAKE- ADDISON | item67 | 1 | Nos. |
| 69 | 69 | ENDMILL\nSpecification:-SIZE Ø10\nSOLID CORBIDE\nFLUTES NUMBER-2&4\nCERATIZIT/SANVIK /TAEGUTEC/\nETC STANDARD SIZE\n | item68 | 1 | NOS |
| 70 | 70 | ENDMILL\nSpecification:-SIZE Ø12\nSOLID CORBIDE\nFLUTES NUMBER-4\nCERATIZIT/SANVIK /TAEGUTEC/\nETC\n | item69 | 1 | NOS |
| 71 | 71 | ENDMILL\nSpecification:-SIZE Ø16\nSOLID CORBIDE\nFLUTES NUMBER-4\nCERATIZIT/SANVIK /TAEGUTEC/\nETC\n | item70 | 1 | NOS |
| 72 | 72 | CUTTER\nSpecification:-SIZE Ø16\nINSERTED CUTTER WITH INSERT\nFLUTES NUMBER-2\nCERATIZIT/SANVIK /TAEGUTEC/\nETC\nINSERT 10 NOS\nISO SUITABLE FOR TOOL\n | item71 | 1 | NOS |
| 73 | 73 | CUTTER\nSpecification:-SIZE Ø20\nINSERTED CUTTER WITH INSERT\nFLUTES NUMBER-3\nCERATIZIT/SANVIK /TAEGUTEC/\nETC\nINSERT 10 NOS\nISO SUITABLE FOR TOOL\n | item72 | 1 | NOS |
| 74 | 74 | BALL NOSE\nSpecification:-SIZE Ø4\nSOLID CORBIDE\nFLUTES NUMBER-2&4 | item73 | 1 | NOS |
| 75 | 75 | BALL NOSE\nSpecification:-SIZE Ø6\nSOLID CORBIDE\nFLUTES NUMBER-2&4 | item74 | 1 | NOS |
| 76 | 76 | DRILL\nSpecification:-SIZE Ø8.5\nCORBIDE | item75 | 1 | NOS |
| 77 | 77 | DRILL\nSpecification:-SIZE Ø9.5\nCORBIDE | item76 | 1 | NOS |
| 78 | 78 | DRILL\nSpecification:-SIZE Ø11.5\nCORBIDE | item77 | 1 | NOS |
| 79 | 79 | DRILL\nSpecification:-SIZE Ø10\nCORBIDE | item78 | 1 | NOS |
| 80 | 80 | REAMER\nSpecification:-SIZE Ø10 H7\n | item79 | 1 | NOS |
| 81 | 81 | REAMER\nSpecification:-SIZE Ø12 H7\n | item80 | 1 | NOS |
| 82 | 82 | MACHINE TAP\nSpecification:-SIZE M10*1.5\n | item81 | 1 | NOS |
| 83 | 83 | CHAMFER TOOL\nSpecification:-SIZE 45° 10MM\nSTRAIGHT SHANK\n | item82 | 1 | NOS |
| 84 | 84 | ENGRAVING TOOL\nSpecification:-SIZE Ø 1 MM | item83 | 1 | NOS |
| 85 | 85 | FACE MILL SHOULDER CUTTER\nSpecification:-SIZE Ø80 \n90° WITH\nINSERT\nFLUTES NUMBER-6 | item84 | 1 | NOS |
| 86 | 86 | COLLET CHUCK\nSpecification:-SIZE MIDIUM LENTH\nSK40 | item85 | 1 | NOS |
| 87 | 87 | BULL NOSE CUTTER\nSpecification:-SIZE Ø 25\nINSERTED STRAIGHT SHANK CUTTER WITH INSERT\nFLUTES NUMBER-2\nSANVIK /TAEGUTEC/\nETC\nINSERT 20 NOS\nISO SUITABLE FOR TOOLS | item86 | 1 | NOS |
| 88 | 88 | COLLETS\nSpecification:-SIZE Ø4, Ø6, Ø8, Ø10, Ø12, Ø16, Ø20 | item87 | 1 | NOS |
| 89 | 89 | Shoe Rack Fiber\nSpecification:-Approx. Dimensions: H 36.2 x W 22.8 x D 10.2\n(all dimensions are in inches)\nApprox. Weight: 1 KG\n | item88 | 1 | NOS |
| 90 | 90 | Tissue Paper Rolls\nSpecification:-6 Rolls In 1 Pack | item89 | 1 | NOS |
| 91 | 91 | Emery Paper \nSpecification:-1200 Grit Wet and Dry (Black) | item90 | 1 | Sheet |
| 92 | 92 | Air Drier for Air Line (CMM) Specification:-Make SMC , With Regulator | item91 | 1 | NOS |
| 93 | 93 | Standard Surface Finish Comparison Specimens (Turn/Mill/Grind)\nSpecification:-(Turn/Mill/Grind) | item92 | 1 | Set |
| 94 | 94 | Metric Dial Indicator Plunger Type\nSpecification:-Resolution : 0.001 mm\nMeasuring Range : 2 mm\nWith adjustable Limit Markers\nCarbide Contact Points\nJeweled Bearing Type | item93 | 1 | NOS |
| 95 | 95 | Metric Dial Test Indicator Lever Type\nSpecification:-Resolution : 0.001 mm\nMeasuring Range : 0.14 mm\nCarbide Contact Points\n | item94 | 1 | NOS |
| 96 | 96 | Universal Bevel Protractor, Blade Length 300mm\nSpecification:-Graduation:5min.(0º- 90º- 0º)\nAccuracy Vernier:±5'\nStraightness [.00016"+(.00005xL/2)]"\nParallelism [.00016"+(.00005xL/2)]"\nL = Length in inch\nDiameter: 2.56" / 70mm\n | item95 | 1 | NOS |
| 97 | 97 | Dial Vernier Caliper\nSpecification:-1. Range - 0-150mm\n2. Least Count - 0.02mm\nMake Mitutoyo\n | item96 | 1 | NOS |
| 98 | 98 | Outside Micrometer\nSpecification:- Baked-Enamel Finish, Ratchet Stop, \nRange, 0-25mm Graduation: 0.01mm\n | item97 | 1 | NOS |
| 99 | 99 | Outside Micrometer\nSpecification:- Baked-Enamel Finish, Ratchet Stop, \nRange, 25-50mm Graduation: 0.01mm\n | item98 | 1 | NOS |
| 100 | 100 | Outside Micrometer\nSpecification:- Baked-Enamel Finish, Ratchet Stop, \nRange, 50-75mm Graduation: 0.01mm\n | item99 | 1 | NOS |
| 101 | 101 | Inside Micrometer— Caliper Type\nSpecification:-Range, 5-30mm Graduation: 0.01mm\n• Carbide measuring faces. \n• Equipped with a constant measuring-force device.\n | item100 | 1 | NOS |
| 102 | 102 | Inside Micrometer— Caliper Type\nSpecification:-Range, 25-50mm Graduation: 0.01mm\n• Carbide measuring faces. \n• Equipped with a constant measuring-force device\n | item101 | 1 | NOS |
| 103 | 103 | Sockets Set 12.7mm (1/2") Square Drive\nSpecification:-S-11M\n(22 Sockets + 5 Accesories)\n10,11,12,13,14,15,16,17,18,19,21,22\n23,24,26,27,28,29,30,32,33,34,\nAccesories 1753,1763,1773,1733,1715\n | item102 | 1 | Box |
| 104 | 104 | Screw Driver Bits Set\n80 pcs set\nSpecification:-80 pcs screw driver bit set\n25mm. Hex-2,2.5,3.4,5,6\n25mm. Flat-3,4,5.5,6,6.5\n25mm. Torx(without handle)-T8,T10,T15,T20,T25,T27,T30,T40\n25mm. Torx(with hole)-TT8,TT10,TT15,TT20,TT25,TT27,TT30,TT40\n25mm. Philips-PH0,PH1,PH2,PH3\n25mm. Adaptor-1/4 SQ. Drive\n50mm. Hex-2,2.5,3.4,5,6\n50mm. Flat-3,4,5.5,6,6.5\n50mm. Torx(without handle)-T8,T10,T15,T20,T25,T27,T30,T40\n50mm. Torx(with hole)-TT8,TT10,TT15,TT20,TT25,TT27,TT30,TT40\n50mm. Philips-PH0,PH1,PH2,PH3\n50mm. Adaptor-1/4 SQ. Drive\n65mm. Two-in-One-PH1xSL4.5,PH2xSL5.5,PH3xSL6.5,PH1xPH1,PH1xPH2,\nPH2xPH2,PH2xPH3,PH3xPH3\n110mm. Two-in-One-PH1xPH1,PH2xPH2,PH3xPH3\n60mm. Bit Holder,Ratchet Bit Driver Handle\n\n | item103 | 1 | Box |
| 105 | 105 | Miscellaneous | |||
| 106 | 106 | Table for trainers | item104 | 1 | Nos. |
| 107 | 107 | Arm chairs for trainers | item105 | 1 | Nos. |
| 108 | 108 | Medical Bandage\nSpecification:-MAKE- HANSAPLAST (REGULAR | item106 | 1 | Nos. |
| 109 | 109 | Dettol Liquid Bottle\nSpecification:-1 BOTTLE- 250 ML. | item107 | 1 | Nos. |
| 110 | 110 | Medical Cotton small | item108 | 1 | Nos. |
| 111 | 111 | Medical Tape | item109 | 1 | Nos. |
| 112 | 112 | AC Remote Battery | item110 | 1 | Nos. |
| 113 | 113 | Screen pointer for projector | item111 | 1 | Nos. |
| 114 | 114 | USB EXTENSION \nSpecification:-5 PORT \nTP-Link UH400 4-Port USB Hub\nFOR DESKTOP AND MACHINE | item112 | 1 | Nos. |
| 115 | 115 | ELECTRICAL EXTENSION BOARD\nSpecification:-HEAVELS | item113 | 1 | Nos. |
| 116 | 116 | Pen Drive 64 GB\nMaker: Sony/HP | item114 | 1 | Nos. |
| 117 | 117 | Hard Disk 1 TB\nMaker: Sony/HP | item115 | 1 | Nos. |
Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
