Providing , Installation , Testing And Commissioning Of 100 Kva Voltage Stabilizer At Pumping Station Nursingh Pura Kalakote Providing , Installation , Testing And CommissioningOf 100 Kva VoltageStabilizer At Pumping StationNursingh Pura Kalako
Tender Overview
Project Description
Providing , Installation , Testing And Commissioning Of 100 Kva Voltage Stabilizer At Pumping Station Nursingh Pura Kalakote Providing , Installation , Testing And CommissioningOf 100 Kva VoltageStabilizer At Pumping StationNursingh Pura Kalakote
BOQ
| Name of Work:- Providing, Installation, testing and commissioning of 100 KVA Voltage stabilizer at pumping station Nursingh pura Kalakote. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.01 | Fabrication/ manufacturing of 100 KVA Voltage Stabilizer. Oil cooled unbalance Type 415Volt, Complete with Transformer Oil in Copper windings capable of operating on unbalanced Voltage.\nCapacity : 100KVA\nPhase : 03\nMake : Confirming to relevant ISO With all latest amendments\nInput voltage : (160-380 ) volt\nOut put voltage : 415 volts +/- 1% \nType Manually operated\nCorrection Rate : 12 to 35 V/sec\nRegulation : +/- 1%\nFrequency : 48 to 52 Hz\nCooling Method : Oil Cooled\nEfficiency : 95%\nHigh & Low cut off : Installed with standard Capacity\nBy pass change over Switch : Yes\nMCCB : Heavy Duty\nSingle phase preventer : Yes\nMaterial of Construction : The Core should be first quality ( CRGO) Silicon Steel core, Conducting conductor should be off 99.95% of Electrolytic Copper, MS Steel thickness of container 14/16 SWG. Transformer Oil to be used shall be of best quality Conforming of IS 335 with latest amendments. Voltage stabilizer shall be mounted on 02 pairs of H/D MS wheels for making shifting/ fixing easy, Voltmeter/Ampere meter Good quality ISI make of Required Specification, Toggle Switch 03 No for input/output reading of each face. Rotary Switches Of suitable Amp range each of 08steps\n 01 for Line voltage\n 02 for step down voltage\n 05 for step up voltage\n | 1 | JOB | |
| 2 | 1.02 | Heavy duty terminal block for input/output terminal.\nPaint : Painting shall be enamelled steel grey / Green Colour.\nInstallation, testing & commissioning of 100 KVA voltage stabilizers by way of carriage/ shifting of stabilizer from manufacturing workshop to site of work on MT and HL including loading and unloading. P/F of Copper cable of standard ISI make (as per site condition) for making connections from main switch to Voltage stabilizer & then to starter for all the three phases in three leads with neutral with proper thimbling duly crimpled by using crimpling tool & proper insulation. Filling of transformer oil up to required level after heat treatment/dehydration to make it moisture free. Testing of voltage stabilizer on full load. Job includes cost of material, carriage/shifting charges and Fitting/testing charges.\n |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender