Jammu Development Authority-JDA has published Construction Of Attached Toilets With Office Of C . E . O Jammu Under Dev . Agency In Architect Organization Building Narwal. Submission Date for this Tender is 16-01-2021. Toilet Bathroom Tenders in Jammu Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Name of Work :- Construction of attached Toilet with office of C.E.O Jammu Urban Dev. Agency Located in Architect organization building Jammu | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:\n15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white\ncement and matching pigment etc., complete.\n In colour such as White, Ivory, Grey, Fume Red Brown | code1 | 1 | Sqm |
2 | 2 | Providing and fixing 1st quality ceramic glazed tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | code2 | 14 | Sqm |
3 | 3 | Providing and fixing white vitreous china pedstal tile water coset European type W C pain with ceat and lid 10 liter low level white PVC flushing systern including flush pipe with manually controlled device ( Handle Liver ) confirming yo IS 7231 with all fittings and fixture complete including cutting and making good the wallsand floors whereever required. WC pan with ISI marked white solid plastic seat and lid | code3 | 1 | Each |
4 | 4 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 | code4 | 3 | Each |
5 | 5 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts collors and bush of approved quality and colour 15mm nominal bore with 30 cm length. | code5 | 3 | Each |
6 | 6 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :\n Cement mortar 1:4 ( 1 cement : 4 coarse sand) | code6 | 10 | Sqm |
7 | 7 | 12mm Cement plaster of mix:\n 1 : 4 ( 1 cement : 4 fine sand) | code7 | 20 | Sqm |
8 | 8 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to\nprepare the surface even and smooth complete.\n13.88.2 2 mm thick | code8 | 31 | Sqm |
9 | 9 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. | code9 | 31 | Sqm |
10 | 10 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. | code10 | 31 | Sqm |
11 | 11 | Providing and fixing wash basin with CI brackets 15mm CP brass pilaars tapes 32mm CP brass waste standard pattern including painting of fittings and brackets cuttings and making good the walls wherever required White Vitroius China wash basin size 630x540 mm with pair of 15mm Cp brass taps | code11 | 1 | Each |
12 | 12 | Providing and fixing white vitreous china pedastal for wash basin completely recessed at the back for the reception of pipes and fittings | code12 | 1 | Each |
13 | 13 | Providing and fixing PTMT liquid soap container 109 mm wide 125mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour wighting not lthan 105 gms | code13 | 1 | Each |
14 | 14 | Providing and fixing PTMT towel ring trapezoail shape 215mm long 200 mm wide with minimum distance of 37 from wall face concleaced fittings arrangments of approved quality and colour wifghting not less than 88 grms | code14 | 1 | Each |
15 | 15 | Providing and fixing PMPT grating of approved quality and colour circular type100 mm dia nominal bore | code15 | 2 | Each |
16 | 16 | Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing\n Rectangular shape 453x357 mm | code16 | 1 | Each |
17 | 17 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 | code17 | 2 | Each |
18 | 18 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ringconforming to IS: 5382 leaving 10 mm gap for thermal expansion.\n(i) Single socketed pipes\n 110 mm diametre | code18 | 6 | Mtr |
19 | 19 | Providing and fixing of floor trap ( 75 MM) of approved quality. | code19 | 1 | Each |
20 | 20 | Providing and fixing of hand jet of superior quality | code20 | 1 | Each |
21 | 21 | Providing and fixing of C.P cup approved quality. | code21 | 8 | Each |
22 | 22 | Providing and fixing of A.C.P sheet of approved quality. | code22 | 24 | sft |
23 | 23 | Providing and fixing of waste pipe 32 MM dia. | code23 | 1 | Each |
24 | 24 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)\n Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) | code24 | 14 | Kg |
25 | 25 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:\n Internal work-Exposed on wall\n 15 mm dia. nominal bore | code25 | 10 | Mtr |
26 | 26 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. | code26 | 10 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail