Uttar Pradesh Power Transmission Corporation Limited-UPPTCL has published Civil Works For 132 Kv Bus Coupler Bay At 220 Kv S/S Majhola , Moradabad. Submission Date for this Tender is 16-02-2021. Couplers Tenders in Moradabad Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Feb-2021 | 68-ECTC/MBD/2020-21 | Date | 16-02-2021 |
| Name of Work:Civil works for 132 kv Bus coupler Bay at 220 KV s/s Majhola Moradabad | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.5 Metre and lead upto 30 metre and including filling, watering, and ramming of excavated earth into the trenches or into the space between the building and the side of the foundation trenches or in to the plinth and removal & disposal of surplus earth as directes by the Engineer- in- charge up to a distance of 30m from the foundation trenches. (CSI No. 4.01) | BI01010001010000000000000515BI0100001113 | 35 | Cum |
| 2 | 2 | Excavation in foundation in ordinary soil in small pit in auxiliary structure(700x700x1000)mm foundation as per drawing in out-door switch yard (CSI No. 4.03) | BI01010001010000000000000515BI0100001114 | 5 | Cum |
| 3 | 3 | Add to item no. 1& 2 above but for every additional 30 meters lead or part of 30 Meters or fore every additional 1.5 M lift of part of 1.5 Metres ( CSI No. 4.06 ) | BI01010001010000000000000515BI0100001115 | 2 | cum |
| 4 | 4 | Clearing jungle including uprooting of rank vegetations , grass ,bush wood and removal of rubbish upto a distance of 50 meters outside the periphery of area cleared (CSI No.26.36) | BI01010001010000000000000515BI0100001116 | 10 | Sqm |
| 5 | 5 | Cutting or filling undulated land for proper leveling and dressing the area including cutting and filling the earth upto 100mm depth if required and as per direction of E/I, complete with all material, labour and T&P etc. required for proper completion of work. (CSI No. 4.07) | BI01010001010000000000000515BI0100001113 | 5 | sqm |
| 6 | 6 | Concrete with 4cm gauge down graded Stone ballast, coarse sand (F.M. 2.9 to 3.2) and cement in proportion of 12:6:1 in foundation and under floors and supply of all materials, labour, tools and plants etc. required for proper completion of the work. (CSI No. 5.01) | BI01010001010000000000000515BI0100001114 | 3 | Cum |
| 7 | 7 | Cement concrete with 2cm gauge Stone ballast, coarse sand ( F.M. 2.9 to 3.2) and cement in the proportion 1:1.5:3 including supply of all materials, labour and T&P etc. required for proper completion of work. (CSI No. 5.04) | BI01010001010000000000000515BI0100001115 | 7 | Cum |
| 8 | 8 | RCC work with cement, approved coarse sand and 2cm (3/4”) gauge approved stone ballast in the proportion of 1:1.5:3 in the lintels or bends and sun shade of doors and windows excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 B.W.G. G.I. wire including necessary centering and smooth shuttering etc required for proper completion of work including supply of all material, binding wire, labour and T&P etc. (CSI No. 5.08) | BI01010001010000000000000515BI0100001116 | 1 | Cum |
| 9 | 9 | Precast cement concrete door sills, Chaukhats, boundary posts, shelves and similar small work with cement, approved coarse sand ( F.M. 2.9 to 3.2) and 20mm gauge down graded stone ballast in proportion of 1:1.5:3. excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 B.W.G. G.I. binding wire including the cost of binding wire, moulds and all other materials, labour and T&P etc. required for proper completion of the work. (CSI No. 5.06) | BI01010001010000000000000515BI0100001113 | 1 | Cum |
| 10 | 10 | Concreting of 40 mm thick R.C.C. trench cover of mild steel frame work with CC 1:1.5:3 in cement coarse sand, 12 mm down graded stone ballast with smooth finishing on both top and bottom surfaces matching with floor colour complete with all labour, materials, T&P etc. required for proper completion of the work but excluding cost of cover of steel frame. (CSI No. 5.17) | BI01010001010000000000000515BI0100001114 | 4 | Sqm |
| 11 | 11 | RCC work with cement, approved coarse sand and 2cm (3/4”) gauge approved stone ballast in the proportion of 1:1.5:3 in the R.C.C. Raft foundation and footing. excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 B.W.G. G.I. wire including necessary centering and smooth shuttering etc required for proper completion of work including supply of all material, binding wire, labour and T&P etc. (CSI No. 5.14) | BI01010001010000000000000515BI0100001115 | 3 | Cum |
| 12 | 12 | RCC work with cement, approved coarse sand and 2cm (3/4”) gauge approved stone ballast in the proportion of 1:1.5:3 in the T-beam, columns and walls upto 1.50mt. Ht. ( Only web of T or L beam shall be measured.) excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 B.W.G. G.I. wire including necessary centering and smooth shuttering etc required for proper completion of work including supply of all material, binding wire, labour and T&P etc. (CSI No. 5.16) | BI01010001010000000000000515BI0100001116 | 0.6 | Cum |
| 13 | 13 | RCC work with cement, approved coarse sand and 2cm (3/4”) gauge approved stone ballast in the proportion of 1:1.5:3 in the T-beam, columns and walls for more than 1.50mt. Ht. ( Only web of T or L beam shall be measured.) excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 B.W.G. G.I. wire including necessary centering and smooth shuttering etc required for proper completion of work including supply of all material, binding wire, labour and T&P etc. (CSI No. 5.16A) | BI01010001010000000000000515BI0100001113 | 0.5 | Cum |
| 14 | 14 | Placing of trench cover of all size in proper position including transporting from different places within the s/s area including all labour T&P etc. required for proper completion of the work as per direction of Engineer-in charge. (CSI No. 5.19) | BI01010001010000000000000515BI0100001114 | 10 | Each |
| 15 | 15 | Providing cement concrete with cement, approved coarse sand (F.M. 1.5 to 2.5) and 12 mm gauge down graded approved stone ballast in the proportion of 1:1.5:3 in the grouting of Edge of trenches including necessary centering and shuttering etc. including supply of all materials, labour and T&P etc. required for proper completion of work. (CSI No. 5.21) | BI01010001010000000000000515BI0100001115 | 1 | Cum |
| 16 | 16 | 1st class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of work. (CSI No. 6.01) | BI01010001010000000000000515BI0100001116 | 1 | Cum |
| 17 | 17 | 1st class brick work in 1:4 cement and coarse sand of 2.25 F.M. mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of work. (CSI No. 6.02) | BI01010001010000000000000515BI0100001113 | 1 | Cum |
| 18 | 18 | 1st class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortar in supestructure(230mm) thick wall including supply of all material, labour and T&P etc. required for proper completion of work. (CSI No. 6.01+6.06) | BI01010001010000000000000515BI0100001114 | 0.5 | Cum |
| 19 | 19 | Mild steel or iron work in heavy small section like (J/U) hooks, holding down bolts, hold fast, tie rod, record recks, door/window frame, trench recks & edges, angle post etc. (when not included in overall rates) wrought to required form including supply of steel bolts, nuts, wastage etc. and their fixing charges, welding, required for proper completion of the work. (CSI No. 9.01) | BI01010001010000000000000515BI0100001115 | 0.25 | M.T. |
| 20 | 20 | As above item in (csi 9.01) but in case the steel supplied by department free of cost .(CSI 9.01 a) | BI01010001010000000000000515BI0100001116 | 0.5 | M.T. |
| 21 | 21 | Mild steel or iron work in heavy large size sections such as trusses, built-up gates, roof work, window/boundry grill or railing, trench covers, grating, T/F rail etc. wrought to required form including supply of steel bolts, nuts, wastage etc. and their fixing charges, welding, required for proper completion of the work.(CSI No. 9.02) | BI01010001010000000000000515BI0100001113 | 0.5 | M.T. |
| 22 | 22 | Mild steel or iron work in heavy large size sections such as trusses, built-up gates, roof work, window/boundry grill or railing, trench covers, grating, T/F rail etc. wrought to required form including supply of steel bolts, nuts, wastage etc. and their fixing charges, welding, required for proper completion of the work. (Supplied by department free of cost.)(CSI No. 9.02A) | BI01010001010000000000000515BI0100001114 | 0.5 | M.T. |
| 23 | 23 | T.M.T. or Tor Steel in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks, and authorized overlapping as required for proper completion of the work.(CSI No. 9.04) | BI01010001010000000000000515BI0100001115 | 0.25 | M.T. |
| 24 | 24 | Supply of 32 mm dia Fully galvanized (conforming to IS2625: 1985) M.S. Anchor bolts (conforming to IS 5624:1993) 900 mm. Long with base plate (75x75x6mm) welded with anchor bolts including its threading upto a length of 10cm and also supply of a pair of standard nuts with therading including supply of 5mm thick washer and cost of labour material and T&P etc. required for proper completion of the work.(CSI No. 9.08A) | BI01010001010000000000000515BI0100001116 | 8 | each |
| 25 | 25 | Supply of 28 mm dia Fully galvanized (conforming to IS2625: 1985) M.S. Anchor bolts (conforming to IS 5624:1993) 900 mm. Long with base plate (75x75x6mm) welded with anchor bolts inclduing its threading upto a length of 10cm and hot dip galvonized 15-20cm also supply of a pair of standard nuts with therading including supply of 5mm thick washer and cost of labour material and T&P etc. required for proper completion of the work.(CSI No. 9.09) | BI01010001010000000000000515BI0100001113 | 8 | Each |
| 26 | 26 | Fixing and grouting the Anchor bolts 28mm dia to 32mm dia in proper alignment level and setout with the help of a template complete including supply of all labour & T&P etc. requiired for proper completion of the work. (CSI No. 9.10) | BI01010001010000000000000515BI0100001114 | 16 | Each |
| 27 | 27 | Supply of 25 mm dia. M.S Anchor bolts (conforming to IS-266) 500 mm long with base plate (50x50x6 mm) welded with anchor bolts, including its threadng up to a length of 10 cm and also supply of a pair of standard nuts with theading including supply of 5mm thick washer and cost of labour material and T&P etc. required for proper completion of the work.(CSI No. 9.11) | BI01010001010000000000000515BI0100001115 | 40 | Each |
| 28 | 28 | Fixing and grouting the Anchor bolts 25 mm dia in proper alignment level and setout with the help of a template complete including supply of all labour & T&P etc. requiired for proper completion of the work. (CSI No. 9.12A) | BI01010001010000000000000515BI0100001116 | 40 | Each |
| 29 | 29 | Placing of template in position, level and alignment for grouting of Anchor bolt in main gantry (Labour only). (CSI NO. 9.18) | BI01010001010000000000000515BI0100001113 | 1 | Each |
| 30 | 30 | Placing of template in position, level and alignment for grouting of Anchor bolt in auxillary structure (Labour only)(CSI No. 9.19) | BI01010001010000000000000515BI0100001114 | 8 | Each |
| 31 | 31 | Fixing and grouting of trench edging and rack in proper level and alignment including cost of all labour and T&P etc required for proper completion of the work but excluding cost of C.C.(CSI.9.20) | BI01010001010000000000000515BI0100001115 | 30 | RM |
| 32 | 32 | 12mm thick plaster with cement mortar of 1 part cement & 4 parts of approved coarse sand 2.5 F.M. in 1:4 over Brick work, min. thickness not less than 10mm including supply all material, labour and T&P required for proper completion of work. (CSI No. 11.05) | BI01010001010000000000000515BI0100001116 | 45 | Sqm. |
| 33 | 33 | Champhering the edge of concrete 35mm wide triangular section at the junction of concrete foundations and trench edging etc.as per direction of E/I, inclduing cost of all material labour and T&P etc. required for proper completion of the work (CSI No. 11.15) | BI01010001010000000000000515BI0100001113 | 15 | RM |
| 34 | 34 | 40mm thick 1:2:4 cement concrete floor with cement, approved coarse sand and 20mm graded stone aggregate laid in panels finished with 3mm floating coat of neat cement, over base concrete. Rate includes cost of all materials, labour and T&P required for proper completion of work but excluding cost of base concrete. (CSI No. 12.02) | BI01010001010000000000000515BI0100001114 | 8 | Sqm |
| 35 | 35 | Painting or varnishing on iron works in small areas of new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mixed (ICI Dulux)paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the ISI no. 103-1950. (CSI No. 13.01) | BI01010001010000000000000515BI0100001115 | 7 | Sqm |
| 36 | 36 | Painting or varnishing on iron works in small areas of new wood work every coat after Ist coat. one coat of approved superior quality ready mixed (ICI Dulux)paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the ISI no. 103-1950. (CSI No. 13.02) | BI01010001010000000000000515BI0100001116 | 10 | Sqm |
| 37 | 37 | Painting or varnishing on iron works in small areas of every coat on previously painted old wood or steel work of approved superior quality ICI Dulux or Equivalent ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the ISI no. 103-1950. (CSI No.13.03) | BI01010001010000000000000515BI0100001113 | 3 | Sqm |
| 38 | 38 | One priming coat & one coat synthetic / acrylic distemper / ICI on every coat on previously old distempered surface work including supply of all materials, labour and T&P etc. required for proper completion of the work.the rate are including all scraping ,cleaning and rubing the surface.(CSI No.13.11) | BI01010001010000000000000515BI0100001114 | 4 | Sqm |
| 39 | 39 | One coat synthetic / acrylic distemper on every coat after the first coat of all materials, labour and T&P etc. required for proper completion of the work.(CSI No.13.10) | BI01010001010000000000000515BI0100001115 | 4 | Sqm |
| 40 | 40 | Painting of letters and numbers over trench covers with the help of stencil including painting of base of 200mm dia. with one coat of primer and two coat of superior quality water proof paint such as WEATHERSHIELD MAX or equivalent. Size of letter shall be (60mmx10mm)and written with superior quality paint. Rates including supply of all material labour and T&P etc. required for proper completion of work.( CSI No 13.15) | BI01010001010000000000000515BI0100001116 | 30 | Each cover |
| 41 | 41 | Finishing walls with water proof exterior emulsion paint of APEX ULTIMA (ASIAN)/Weather Shield Max (ICI) or equivalent brand each coat of water proof exterior emulsion of approved brand on old surface including cleaning at Apex/Weather shield Max emulsion paint to give an even shade including thorough washing with water as per direction E/I including cost of all material labour & T&P required for proper completion of work. .the rate are including all scraping ,cleaning and rubing the surface.(CSI No.13.08) | BI01010001010000000000000515BI0100001113 | 8 | Sqm |
| 42 | 42 | Finishing walls with water proof exterior emulsion paint of APEX ULTIMA (ASIAN)/Weather Shield Max (ICI) or equivalent brand on for every additional coat to give an even shade including thorough washing with water as per direction E/I including cost of all material labour & T&P required for proper completion of work. (CSI 13.07) | BI01010001010000000000000515BI0100001114 | 8 | sqm |
| 43 | 43 | Applying two coat of Dr.Fixit pidicrete URP with cement slurry of one parts of Dr. Fixit pidicrete URP (covering area of URP-2.00 to 2.2Sqm/Kg) and 1.5 parts of cement on Horizontal and vertical damp surface. Before application ,clean the surface with wire brush or scrubber to remove hidden dirt,loose particles,laitance and dust, degrease the surface by using suitable solvent. throughly saturated the surface with potable water but at the time of application water should not be accumulated at any place as per direction E/I including supply of all materials ,labours and T& P etc.required for proper completion of work.CSI NO. 26.35 | BI01010001010000000000000515BI0100001115 | 2 | per Sqm |
| 44 | 44 | Dismantling plastered or unplastered brick work or stone masonry work in lime or cement mortar and inclduing stacking of materials as directed by Engineer-in-charge within a distance of 60 meters.(CSI No. 15.01) | BI01010001010000000000000515BI0100001116 | 0.5 | Cum |
| 45 | 45 | Dismantling reinforced cement concrete or reinforced brick work or Cement.Concrete. including stacking of dismantled material as directed by the Engineer-in-charge within a distance of 60 metres.(CSI No. 15.02) | BI01010001010000000000000515BI0100001113 | 1 | Cum |
| 46 | 46 | Dismantling existing plaster including disposal of refuse as directed by the Enginer-in-charge within a distance of 60 metres.(CSI No. 15.06) | BI01010001010000000000000515BI0100001114 | 2 | Sqm |
| 47 | 47 | Thorough cleaning of septic tank with sludge pump including disposal of waste outside the corporation area including removing septic tank cover and refixing cover in its position as per direction of the E/I including cost of all labour, T&P etc. required for proper completion of work.(CSI No. 22.19) | BI01010001010000000000000515BI0100001115 | 1 | Each |
| 48 | 48 | Replacing and fixing White glazed earthen ware W.C. ‘ Orissa `Pan (Hindware Cat. No.20042) 580 mm size of approved sample including cost of all materials, labour and T&P etc completion including dismentling of broken Pan and its disposal out side corporation area..(CSI No. 22.39) | BI01010001010000000000000515BI0100001116 | 1 | Each |
| 49 | 49 | Replacing and fixing first quality White glazed earthenware European seat with seat cover (Hindware Cat.No.20044) (575mmx345mmx390mm) Size (as approved sample) including cost of all materials, labour and T&P etc. required for proper completion of wrok. (CSI No. 22.41) | BI01010001010000000000000515BI0100001113 | 1 | Each |
| 50 | 50 | Providing and fixing low level PVC cistern Hindware or equivalent make 10 litre capacity complete with all accessories including cost of all materials, labour and T&P etc. required for proper completion of work. (CSI No. 25.20) | BI01010001010000000000000515BI0100001114 | 1 | Each |
| 51 | 51 | Disposal of rubbish/debris outside the corporation area as per direction of Engineer in-charge including cartage labour and T&P etc. required for proper completion of the work.(CSI No. 22.22) | BI01010001010000000000000515BI0100001115 | 1 | Per Cart |
| 52 | 52 | Hiring charge of welding machine for 8 hours service in a day or part as per requirement for attending miner type welding work as and where required as per direction of E/I.(CSI No. 22.101) | BI01010001010000000000000515BI0100001116 | 1 | Job Per Day |
| 53 | 53 | Brick work with old or dismantled bricks in 1:6 cement and coarse sand mortar in (230mm) thick wall in foundation and other place including cost of all materials, labour,cleaning of old bricks and T&P etc. required for proper completion of work.( CSI 22.04) | BI01010001010000000000000515BI0100001113 | 0.5 | Cum |
| 54 | 54 | P/F 50mm dia G.I Union(23.5)+5%F+10%C.P | BI01010001010000000000000515BI0100001114 | 1 | Each |
| 55 | 55 | P/F 40mm dia G.I Union(23.5)+5%F+10%C.P | BI01010001010000000000000515BI0100001115 | 1 | Each |
| 56 | 56 | P/F 25mm dia G.I Union(23.5)+5%F+10%C.P | BI01010001010000000000000515BI0100001116 | 1 | Each |
| 57 | 57 | Providing and fixing 15mm dia B-class (Tata,Jindal) ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour TandP etc complete (Internal work).(CSI 24.01). | BI01010001010000000000000515BI0100001116 | 1 | RM |
| 58 | 58 | Providing and fixing 25mm dia B-class (TATA /JINDAL / HISAR make) ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. The rate also includes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour TandP etc complete (External work).(CSI 24.12). | BI01010001010000000000000515BI0100001113 | 1 | RM |
| 59 | 59 | Providing and fixing 40 mm dia B-class (TATA /JINDAL/ HISAR make) ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. The rate also includes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour TandP etc complete (External work).(CSI 24.14). | BI01010001010000000000000515BI0100001114 | 1 | RM |
| 60 | 60 | Providing and fixing 50mm dia B-class (TATA /JINDAL /HISAR make) ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. The rate also includes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour TandP etc complete (External work).(CSI 24.15). | BI01010001010000000000000515BI0100001115 | 1 | RM |
| 61 | 61 | Supply and fixing C.P. Brass stop cock 15 mm dia heavy quality 400gm (Hindware make CAT NO-F200007) including supply of all materials labour .TandP etc. required for the proper complittion of the work (CSI.24.28) | BI01010001010000000000000515BI0100001116 | 1 | Each |
| 62 | 62 | Providing and fixing full way Brass G.M. gate valve 25mm dia with wheel valve ISI marked heavy quality including supply of all materials, labour and T&P etc. required for proper completion of the work.CSI.24.35 | BI01010001010000000000000515BI0100001113 | 2 | Each |
| 63 | 63 | Providing and fixing full way Brass G.M. gate valve 40mm dia with wheel valve ISI marked heavy quality including supply of all materials, labour and T&P etc. required for proper completion of the work.CSI.24.37 | BI01010001010000000000000515BI0100001114 | 1 | Each |
| 64 | 64 | Providing and fixing full way Brass G.M. gate valve 50mm dia with wheel valve ISI marked heavy quality including supply of all materials, labour and TandP etc. required for proper completion of the work.CSI.24.38 | BI01010001010000000000000515BI0100001115 | 1 | Each |
| 65 | 65 | Providing barbed iron wire fencing including fixing in post after stretching it including cost of all material, labour in T&P etc. requried for proper completion of the work. (CSI No.9.24 ) | BI01010001010000000000000515BI0100001116 | 1 | Kg |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
