Development Of Park ( Sh Providing Fixing Open Gym ) Sector-62 C-58 With Five Year Maintenance, NOIDA-Uttar Pradesh

Development Of Park ( Sh Providing Fixing Open Gym ) Sector-62 C-58 With Five Year Maintenance.- 1 1 Air Walker: Providing, Designing And Fixing Of Air-Walker Of Size 1100 X 550 X 1480Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Other Pipes Of 40Mm Dia 2.5 Mm Thick Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated 80-120 Micron Thick Using Akzo Nobel Or Equivalent In Desired Shade And Colour. All Welding Joints Of Pipe Shall Be Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All The Welding Points Prior To Finishing. All Open Ends Of Pipe To Be Closed With Gi / Lldpe Caps, Base Plate Cover Shall Be Made Of Virgin Lldpe Plastic By Rotational Molding With Minimum 8Mm Thickness, Uv Resistant And Colour As Approved By Engineer In Charge. High Quality Grip Rubber Should Be Used On Handles. Foothold Shall Be Made Of Nylon Alloy With Rounded Edges To Prevent Impact And Injury. Maintenance Free Bearings Should Be Used In The Equipments Manufactured By Reputed Company Duly Oil Sealed And Self Lubricated To Be Approved By Engineer-In-Charge. The Equipment Shall Be Fitted With In-Built Limiters. The Equipment Shall Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shaped Welded Bolts And When Concrete Is Set, Fixing The Equipment On To It And Cover Nuts And Bolts With Base Plate Cover, All Complete As Per Directions And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour ( Of Metal, Seat And Pedal ) , And Fixing Of Equipment Etc ( The Cement Concrete And Nexcavation Work Shall Be Paid Separately ) . 1 Each 2 2 Sit Up Station: Providing, Designing And Fixing Of Double Sit-Up Station Of Size 1500 X 1150 X 650Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Rest Of The Pipe Of 40Mm Dia And 2.5Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Or Equivalent Of 80 - 120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Calloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Seat And Base Plate Cover To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic As 8Mm, Colorful And Uv Resistant And Environmental Friendly. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix The Equipments On To It And Cover Nuts And Bolts With The Base Plate.All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Pedal ) And Fixing Of Equipments Etc. ( The Cement Concrete Nand Excavation Work Shall Be Paid Separately ) . 1 Each 3 3 Air Swing: Providing, Designing And Fixing Of Air Swing In Pair Of Size 1150 X 900 X 1250Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Rest Of The Pipe 40Mm Dia And 2.5Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Or Equivalent Of 80 - 120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Pedals Shall Be Made Of Nylon Alloy With Rounded Edges To Prevent Any Impact Of Injury And Base Plate Cover To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic Of 8Mm, Colorful And Uv Resistant And Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Closed By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate. All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipments Etc ( The Cement Concrete And Excavation Work Nshall Be Paid Nseparately ) . N 1 Each 4 4 Horse Rider Station: Providing, Designing And Fixing Of Horse Rider Station Of Size 1000 X 600 X 1100 Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Rest Of The Pipe 40Mm Dia And 2.5Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Or Equivalent Of 80 - 120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Pedals Shall Be Made Up Of Nylon Alloy With Rounded Edges To Prevent Any Impact Of Injury. Base Plate Cover And Seat To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic As 8Mm, Colorful And Uv Resistant And Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movement. All Open Ends Of Pipe To Be Closed By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shape Welded Bolt And Once The Concrete Is Set, Fix The Equipment On To It And Cover With The Base Plate. All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate Cover And Fixing Of Equipments Etc ( The Cement Concrete And Excavation Nwork Shall Be Paid Separately ) . N 1 Each 5 5 Stair Stepper: Providing, Designing And Fixing Of Stair Stepper In A Combination Of Pair And A Single Step Of Size 1000 X 800 X 1400 Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Rest Of The Pipe 40Mm Dia And 2.5Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Ncoated Using Akzo Nobel Or Equivalent Of 80 - 120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Pedals Shall Be Made Up Of Nylon Alloy With Rounded Edges To Nprevent Any Impact Of Injury And Base Plate Cover To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic As 8Mm, Colorful And Uv Resistant And Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Ninbuilt Limiters To Prevent Unwanted Movements. Nall Open Ends Of Pipe To Be Closed By Gi / Lldpe Caps For User Safety. Nthe Equipment To Be Fixed On Ground With Concrete Of Minimum Strength N M-25 And J Shape Welded Bolt And Once The Concrete Is Set, Fix The Nequipment On To It And Cover Nuts And Bolts With The Base Plate. All Ncomplete As Per Direction And Approval Of Engineer- In-Charge Regarding N Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipments Etc ( The Cement Concrete And Nexcavation Work Shall Be Paid Separately ) . N 1 Each 6 6 Leg Press: Providing, Designing And Fixing Of Leg Press Of Size 2000 X 550 X 1600 Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Rest Of The Pipe 40Mm Dia And 2.5Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Or Equivalent Of 80 - 120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars To Be Provided With High Quality Grip Rubber On Top End. Pedals Shall Be Made Up Of Nylon Alloy With Rounded Edges To Prevent Any Impact Of Injury. Seat And Base Plate Cover To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic As 8Mm, Colorful And Uv Resistant And Environmental Friendly. Bearingused Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Closed By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate. All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipments Etc ( The Cement Concrete And Excavation Work Shall Be Npaid Separately ) . 1 Each 7 7 Pull Chair: Providing, Designing And Fixing Of Pull Chair In A Pair Of Size 2500 X 800 X 2000 Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Rest Of The Pipe 40Mm Dia And 2.5Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Or Equivalent Of 80 - 120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber On Top End. Pedals Shall Be Made Up Of Nylon Alloy With Rounded Edges To Prevent Any Impact Or Injury Seat And Base Plate Cover To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic As 8Mm, Colorful And Uv Resistant And Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movement. All Open Ends Of Pipe To Be Closed By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shape Welded Bolt And Once The Concrete Is Set, Fix The Equipment On To It And Cover With The Base Plate. All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipments Etc ( The Cement Concrete And Excavation Work Shall Be Npaid Separately ) . N N N 1 Each 8 8 Exercising Bar: Providing, Designing And Fixing Of Exercising Bar In A Pair Of Size 1800 X 550 X 1700 Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Rest Of The Pipe 40Mm Dia And 2.5Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Or Equivalent Of 80 - 120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber At Top End. Base Plate Cover To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic As 8Mm, Colorful And Uv Resistant And Environmental Friendly. All Open Ends Of Pipe To Be Closed By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover With The Base Plate. All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Pedal And Fixing Of Equipments Etc N ( The Cement Concrete And Excavation Work Shall Be Paid Separately ) . N N 1 Each 9 9 Seated Chest Press: Providing, Designing And Fixing Of Seated Chest Press In A Pair Of Size 1800 X 700 X 2000 Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Rest Of The Pipe 40Mm Dia And 2.5Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Or Equivalent Of 80 - 120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber. Pedals Shall Be Made Up Of Nylon Alloy With Rounded Edges To Prevent Any Impact Or Injury. Seats And Base Plate Cover To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic As 8Mm, Colorful And Uv Resistant And Environmental Riendly. Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movement. All Open Ends Of Pipe To Be Closed By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shape Welded Bolt And Once The Concrete Is Set, Fix The Equipment On To It And Cover With The Base Plate. All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Plate And Fixing Of Equipments Etc ( The Cement Concrete And Excavation Work Shall Nbe Paid Nseparately ) . N 1 Each 10 10 Arm Wheel: Providing, Designing And Fixing Of Arm Wheel In A Pair Of Size 850 X 800 X 1800 Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Rest Of The Pipe 40Mm Dia And 2.5Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Or Equivalent Of 80 - 120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber. Pedals Shall Be Made Up Of Nylon Alloy With Rounded Edges To Prevent Any Impact Or Injury And Base Platecover To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic As 8Mm, Colorful And Uv Resistant And Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movement. All Open Ends Of Pipe To Be Closed By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix The Equipments On To It And Cover With The Base Plate. All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Plate And Fixing Of Equipments Etc ( The Ncement Concrete And Excavation Work Shall Be Paid Separately ) . 1 Each 11 11 Elliptical Exerciser: Providing, Designing And Fixing Elliptical Exerciser Of Size 1200 X 540 X 1600 Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Rest Of The Pipe 40Mm Dia And 2.5Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Or Equivalent Of 80 - 120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber. Pedals Shall Be Made Up Of Nylon Alloy With Rounded Edges To Prevent Any Impact Or Injury And Base Plate Cover To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic As 8Mm, Colorful And Uv Resistant And Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movement. All Open Ends Of Pipe To Be Closed By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix The Equipments On To It And Cover With The Base Plate. All Complete As Per Directionand Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Plate And Fixing Of Equipments Etc ( The Cement Nconcrete And Excavation Work Shall Be Paid Separately ) . 1 Each 12 12 Double Cross Walker: Providing, Designing And Fixing Double Cross Walker Of Size 1600 X 600 X 1600 Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Rest Of The Pipe 40Mm Dia And 2.5Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Or Equivalent Of 80 - 120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Pedals Shall Be Made Up Of Nylon Alloy With Rounded Edges To Prevent Any Impact Or Injury And Base Plate Cover To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic As 8Mm, Colorful And Uv Resistant And Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movement. All Open Ends Of Pipe To Be Closed By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix The Equipments On To It And Cover With The Base Plate. All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Pedal And Fixing Of Equipments Etc ( The Cement Concrete And Excavation Work Shall Be Npaid Separately ) . 1 Each 13 13 Twister: Providing, Designing And Fixing Twister Of Size 1700 X 1300 X 1300 Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Rest Of The Pipe 40Mm Dia And 2.5Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Or Equivalent Of 80 - 120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber. Foothold Shall Be Made Up Of Nylon Alloy With Rounded Edges To Prevent Any Impact Or Injury And Base Plate Cover To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic As 8Mm, Colorful And Uv Resistant And Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movement. All Open Ends Of Pipe To Be Closed By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix The Equipments On To It And Cover With The Base Plate. All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Pedal And Fixing Of Equipments Etc ( The Cement Concrete And Excavation Work Shall Nbe Paid Separately ) . N N 1 Each 14 14 Rowing Machine: Providing, Designing And Fixing Rowing Machine Of Size 1280 X 800 X 1150 Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Rest Of The Pipe 40Mm Dia And 2.5Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Or Equivalent Of 80 - 120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber. Foothold Shall Be Made Up Of Nylon Alloy With Rounded Edges To Prevent Any Impact Or Injury And Base Platecover To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic As 8Mm, Colorful And Uv Resistant And Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movement. All Open Ends Of Pipe To Be Closed By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix The Equipments On To It And Cover Withn The Base Plate. All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Pedal And Fixing Of Equipments Etc ( The Cement Nconcrete And Excavation Work Shall Be Paid Separately ) . N N 1 Each 15 15 Bridge Ladder: Providing, Designing And Fixing Bridge Ladder Of Size 2750 X 1000 X 1500 Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Rest Of The Pipe 40Mm Dia And 2.5Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Or Equivalent Of 80 - 120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber. Foothold Shall Be Made Up Of Nylon Alloy With Rounded Edges To Prevent Any Impact Or Injury And Base Platecover To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic As 8Mm, Colorful And Uv Resistant And Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movement. All Open Ends Of Pipe To Be Closed By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix The Equipments On To It And Cover Withn The Base Plate. All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Pedal And Fixing Of Equipments Etc ( The Cement Nconcrete And Excavation Work Shall Be Paid Separately ) . N N 1 Each 16 16 Weight Lifter: Providing, Designing And Fixing Weight Lifter Of Size 1000 X 1000 X 2500 Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Rest Of The Pipe 40Mm Dia And 2.5Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Or Equivalent Of 80 - 120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber. Foothold Shall Be Made Up Of Nylon Alloy With Rounded Edges To Prevent Any Impact Or Injury And Base Platecover To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic As 8Mm, Colorful And Uv Resistant And Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movement. All Open Ends Of Pipe To Be Closed By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix The Equipments On To It And Cover Withn The Base Plate. All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Pedal And Fixing Of Equipments Etc ( The Cement Nconcrete And Excavation Work Shall Be Paid Separately ) . N N 1 Each 17 17 Fix Dumbbell: Providing, Designing And Fixing Fix Dumbbell Of Size 1250 X 350 X 2200 Mm Fabricated With Main Post Of 114Mm Dia And 2.5Mm Thick And Rest Of The Pipe 40Mm Dia And 2.5Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Or Equivalent Of 80 - 120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber. Foothold Shall Be Made Up Of Nylon Alloy With Rounded Edges To Prevent Any Impact Or Injury And Base Platecover To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic As 8Mm, Colorful And Uv Resistant And Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movement. All Open Ends Of Pipe To Be Closed By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix The Equipments On To It And Cover Withn The Base Plate. All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Pedal And Fixing Of Equipments Etc ( The Cement Nconcrete And Excavation Work Shall Be Paid Separately ) . 1 Each 18 18 Excavating Holes More Than 0.10 Cum & Upto 0.5 Cum Including Getting Out The Excavated Soil, Then Returning The Soil As Required In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering Etc, Disposing Of Surplus Excavated Soil, As Directed Within A Lead Of 50 M And Lift Upto 1.5 M. ( D.S.R. Page No. 75 Item No. 2.30.1 N A.All Kinds Of Soil. 23 Nos 19 19 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level: Na ) 1:1½ :3 ( 1 Cement : 1½ Coarse Sand ( Zone-Iii ) : 3 Graded Stone Aggregate 20Mm Nominal Size ) . N 30 Cum 20 19.01 B. 1:5:10 ( 1 Cement : 5 Coarse Sand ( Zone-Iii ) : 10 Graded Stone Aggregate 40 Mm Nominal Size ) . N 30 Cum 21 20 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Over Areas & Or Drains ( Not Exceeding 1.5M Width Or 10Sqm On Plan ) Including Dressing Of Sides And Ramming Of Bottoms . Lift Upto 1.5M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed With In Liad Of 50M…. Nall Kind Of Soil . N 31.8 Cum 22 21 Providing And Laying At Or Near Ground Level Factory Made Kerb Stoneof M-25 Grade Cement Concrete In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) Including Making Joints With Or Without Grooves ( Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5Mm ) Including Making Drainange Opening Wherever Required Complete Etc. As Per Direction Of Engineer-In-Chrage ( Lenght Of Finished Kerb Edging Shall Be Measured For Payment ) ( Precast C.C. Kerb Stone Shall Be Approved By Engineer-In-Charge ) 5.04 Cum 23 22 Providing And Fixing Rubber Tile Flooring 25Mm Thick Made Of Sbr ( Styrene-Butadiene Rubber ) With Interlocking Arrangements And Adhesive All Complete Colour And Size As Approved By Engineer-In- Charge. 300 Per Sqmt. 24 23 Amc After Completion Of 1 Year Warranty Period Will Be As Follow: - Item No 1 To 17 & 22 ( Air Walker, Sit Up Station, Air Swing, Horse Rider Station, Stair Seated Chest Press, Arm Wheel, Elliptical Machine, Bridge Ladder, Weight Lifter, Fix Dumbbell, Twister & Rubber Tile Flooring ) Annual Maintenance Of Above Equipment, T&P Required Accessories Day To Day Complete In All Respect. Day To Day Complete In All Respect 3

INR 2124 /-

INR 61900.0 /-

Refer document

Name of Work:- D/o Park, (Sh: P/F Open gym) Sector-62, C-58 Park with Five Year Maintenance
	Sl. No.	Item Description	Item Code / Make	Unnamed: 3	Units
1	1	Air Walker: Providing, designing and fixing of Air-Walker of size 1100 x 550 x 1480mm fabricated with main post of 114mm dia and 2.5mm thick and other pipes of 40mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour as approved by Engineer in charge. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by Engineer-in-charge. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment,colour (of metal, seat and pedal), and fixing of equipment etc (the cement concrete and \nexcavation work shall be paid separately).		1	Each
2	2	Sit Up Station: Providing, designing and fixing of double sit-up station of size 1500 x 1150 x 650mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints calloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate.All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete \nand excavation work shall be paid separately).		1	Each
3	3	Air Swing: Providing, designing and fixing of air swing in pair of size 1150 x 900 x 1250mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work \nshall be paid \nseparately).\n		1	Each
4	4	Horse rider station: Providing, designing and fixing of horse rider station of size 1000 x 600 x 1100 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact of injury. Base plate cover and seat to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate cover and fixing of equipments etc (the cement concrete and excavation \nwork shall be paid separately). \n		1	Each
5	5	Stair Stepper: Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 1000 x 800 x 1400 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder\ncoated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edges to\nprevent any impact of injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with\ninbuilt limiters to prevent unwanted movements. \nAll open ends of pipe to be closed by GI/ LLDPE caps for user safety. \nThe equipment to be fixed on ground with concrete of minimum strength\n M-25 and J shape welded bolt and once the concrete is set, fix the \nequipment on to it and cover nuts and bolts with the base plate. All \ncomplete as per direction and approval of engineer- in-charge regarding\n material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc (the cement concrete and \nexcavation work shall be paid separately).\n		1	Each
6	6	Leg Press: Providing, designing and fixing of leg press of size 2000 x 550 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high quality grip rubber on top end. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact of injury. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearingused shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work shall be \npaid separately).		1	Each
7	7	Pull chair: Providing, designing and fixing of pull chair in a pair of size 2500 x 800 x 2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber on top end. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work shall be \npaid separately).\n\n\n		1	Each
8	8	Exercising bar: Providing, designing and fixing of exercising bar in a pair of size 1800 x 550 x 1700 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipments etc \n(the cement concrete and excavation work shall be paid separately).\n\n		1	Each
9	9	Seated chest press: Providing, designing and fixing of seated chest press in a pair of size 1800 x 700 x 2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental riendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base plate and fixing of equipments etc (the cement concrete and excavation work shall \nbe paid \nseparately).\n		1	Each
10	10	Arm wheel: Providing, designing and fixing of arm wheel in a pair of size 850 x 800 x 1800 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury and base platecover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base plate and fixing of equipments etc (the \ncement concrete and excavation work shall be paid separately).		1	Each
11	11	Elliptical exerciser: Providing, designing and fixing elliptical exerciser of size 1200 x 540 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per directionand approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base plate and fixing of equipments etc (the cement \nconcrete and excavation work shall be paid separately).		1	Each
12	12	Double cross walker: Providing, designing and fixing double cross walker of size 1600 x 600 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipments etc (the cement concrete and excavation work shall be \npaid separately).		1	Each
13	13	Twister: Providing, designing and fixing twister of size 1700 x 1300 x 1300 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipments etc (the cement concrete and excavation work shall \nbe paid separately).\n\n		1	Each
14	14	Rowing machine: Providing, designing and fixing rowing machine of size 1280 x 800 x 1150 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base platecover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover withn the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipments etc (the cement \nconcrete and excavation work shall be paid separately).\n\n		1	Each
15	15	Bridge Ladder: Providing, designing and fixing bridge ladder of size 2750 x 1000 x 1500 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base platecover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover withn the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipments etc (the cement \nconcrete and excavation work shall be paid separately).\n\n		1	Each
16	16	Weight Lifter: Providing, designing and fixing weight lifter of size 1000 x 1000 x 2500 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base platecover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover withn the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipments etc (the cement \nconcrete and excavation work shall be paid separately).\n\n		1	Each
17	17	Fix Dumbbell: Providing, designing and fixing fix dumbbell of size 1250 x 350 x 2200 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base platecover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover withn the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipments etc (the cement \nconcrete and excavation work shall be paid separately).		1	Each
18	18	Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. (D.S.R. Page No. 75 Item No. 2.30.1\n a.All kinds of soil.		23	Nos
19	19	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: \na)1:1½ :3 (1 cement : 1½ coarse sand (Zone-III): 3 graded stone aggregate 20mm nominal size). \n		30	Cum
20	19.01	b. 1:5:10 (1 cement : 5 coarse sand(Zone-III) : 10 graded stone aggregate 40 mm nominal size).\n		30	Cum
21	20	Earth work in excavation by mechanical means (Hydraulic excavator )/manual means in over areas & or drains (not exceeding 1.5m width or 10sqm on plan ) including dressing of sides and ramming of bottoms . lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed with in liad of 50m….\nAll kind of Soil . \n		31.8	Cum
22	21	Providing and laying at or near ground level factory made kerb stoneof M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 Cement: 3 Coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainange opening wherever required complete etc. as per direction of engineer-in-chrage (lenght of finished kerb edging shall be measured for payment) (Precast C.C. kerb stone shall be approved by engineer-in-charge)		5.04	Cum
23	22	Providing and fixing rubber tile flooring 25mm thick made of SBR (Styrene-Butadiene Rubber) with interlocking arrangements and adhesive all complete colour and size as approved by Engineer-in- charge.		300	Per Sqmt.
24	23	AMC after completion of 1 year warranty period will be as follow: - item No 1 to 17 & 22(Air Walker, Sit Up Station, Air Swing, Horse rider Station, Stair Seated chest Press, Arm wheel, Elliptical machine, Bridge Ladder, Weight lifter, Fix Dumbbell, Twister & Rubber tile Flooring) Annual Maintenance of above equipment, T&P required accessories day to day complete in all respect. Day to day complete in all respect	3
25	23.01	Year IInd (AMC for 2nd year , 6% of Rs.1957380.00)		12	Months
26	23.02	Year IInd (AMC for 3rd year , 8% of Rs. 1957380.00)		12	Months
27	23.03	Year IInd (AMC for 4th year , 10% of Rs. 1957380.00)		12	Months
28	23.04	Year IInd (AMC for 5th year , 12% of Rs. 1957380.00)		12	Months