Work Of Beautifying The Amusement Parks Located On The Left And Right Sides Of The Gola Barrage In Haldwani Kathgodam
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Jan 2021
0 days left
EMD
98000
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
haldwani → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Work Of Beautifying The Amusement Parks Located On The Left And Right Sides Of The Gola Barrage In Haldwani Kathgodam
BOQ
| Name of Work: gY}kuh dkBxksnke fLFkr xkSyk cSjkt ds ck;sa ,oa nk;sa ik'oZ ij fLFkr euksjatu ikdksZ ds lkSUn;Zdj.k dk dk;Z | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001113 | 6580 | SqM |
| 2 | 2 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 Sq M on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001114 | 2735 | SqM |
| 3 | 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sq M on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001115 | 84 | CuM |
| 4 | 4 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001116 | 799 | CuM |
| 5 | 5 | Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density) complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001117 | 3344 | CuM |
| 6 | 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001118 | 121 | CuM |
| 7 | 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001119 | 1.5 | CuM |
| 8 | 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level [ 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)] complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001120 | 6 | CuM |
| 9 | 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001121 | 8 | CuM |
| 10 | 10 | Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately).(Red San stone- 30 mm thick gang saw cut stone) complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001122 | 6 | SqM |
| 11 | 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement [ (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)] complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001123 | 9 | CuM |
| 12 | 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001125 | 1878 | Kg |
| 13 | 13 | Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases for columns complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001126 | 120 | SqM |
| 14 | 14 | Filling available excavated earth (excluding hard rock / Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001127 | 2 | CuM |
| 15 | 15 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001128 | 2 | CuM |
| 16 | 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001129 | 10 | CuM |
| 17 | 17 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001130 | 62 | SqM |
| 18 | 18 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand): complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001131 | 39 | SqM |
| 19 | 19 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001132 | 167 | SqM |
| 20 | 20 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001133 | 167 | SqM |
| 21 | 21 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) - First layer of slurry of cement @ 0.488 kg/Sq M mixed with water proofing cement compound @ 0.253 kg/Sq M. This layer will be allowed to air cure for 4 hours\nb)- Second layer of slurry of cement @ 0.242 kg/Sq M mixed with water proofing cement compound @ 0.126 kg/Sq M. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001134 | 5 | SqM |
| 22 | 22 | Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001135 | 17 | sqm |
| 23 | 23 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001136 | 12 | sqm |
| 24 | 24 | Providing and laying factory made chamfered edge Cement Concrete\npaver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.Interlocking C.C. paver block ( 80 mm thick, M-30) complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001137 | 579 | SqM |
| 25 | 25 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001138 | 30 | SqM |
| 26 | 26 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001139 | 3200 | Kg |
| 27 | 27 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001140 | 0.75 | CuM |
| 28 | 28 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001141 | 7 | SqM |
| 29 | 29 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001142 | 121 | Kg |
| 30 | 30 | Providing and fixing bright finished brass door latch of approved size with necessary screws etc. complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001143 | 6 | Each |
| 31 | 31 | Providing and fixing bright finished brass handles with screws etc. complete: 125 mm complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001144 | 6 | Each |
| 32 | 32 | Ficus Retusa Topairy well developed with fresh & healthy 5 to 6 big ball specific size and shape 180 to 210cm ht in 40 cm Cement Pot complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001145 | 20 | Each |
| 33 | 33 | Providing and Displaying Bamboo Buddha vally variety with umbrella shape having 120 to 135 ht. with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001146 | 25 | Each |
| 34 | 34 | Providing and displaying of Areca Palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001147 | 15 | Each |
| 35 | 35 | Providing and displaying of Raphis palm having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well developed, full of fresh & healthy leaves from bottom to top in 25 cm size Earthen pot/Plastic pot complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001148 | 20 | Each |
| 36 | 36 | Providing and stacking of Caesalpinia pulcherrima species of height 45-60 cm. in earthen pot of size 20 cm complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001149 | 25 | Each |
| 37 | 37 | Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly /complete as per c.p.w.d specifications, directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001150 | 1456 | SqM |
| 38 | 38 | Supply and Fixing of Mild Steel Frame Gazebos of Size 3.0 x 3.0 with Poly Carbonate Sheet on top complete & as per c.p.w.d specification, directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001151 | 2 | Each |
| 39 | 39 | Supply and Fixing of Three Seater Wrought Iron Benches complete & as per c.p.w.d specification, directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001152 | 21 | Each |
| 40 | 40 | Supply and Fixing of Water Fountains complete & as per c.p.w.d specification, directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001153 | 1 | Each |
| 41 | 41 | Supply and Fixing of Stainless Steel 1m high Dustbins of approved brand complete & as per c.p.w.d specifications, directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001154 | 20 | Each |
| 42 | 42 | Wiring for light point/ fan point/ exhaust fan point/ call bell poin.t with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface I recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001155 | 7 | Each |
| 43 | 43 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001156 | 3 | Each |
| 44 | 44 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit (2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire) as required complete & as directed by Engineer-in- Charge | BI01010001010000000000000515BI0100001157 | 158 | Rmt |
| 45 | 45 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit (2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire) as required complete & as directed by Engineer-in- Charge | BI01010001010000000000000515BI0100001158 | 263 | Rmt |
| 46 | 46 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit (4 X 4 sq. mm + 2 X 4 sq. mm earth wire) as required complete & as directed by Engineer-in- Charge | BI01010001010000000000000515BI0100001159 | 198 | Rmt |
| 47 | 47 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit (4 X 6 sq. mm + 2 X 6 sq. mm earth wire) as required complete & as directed by Engineer-in- Charge | BI01010001010000000000000515BI0100001160 | 154 | Rmt |
| 48 | 48 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 em) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001161 | 1 | Each |
| 49 | 49 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001162 | 1 | Each |
| 50 | 50 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001163 | 2 | Each |
| 51 | 51 | 4 way (4+12), TPN, MCB DB, double door, horizontal type complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001164 | 1 | Each |
| 52 | 52 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc.(SINGLE POLE ) complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001165 | 2 | Each |
| 53 | 53 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 n1A in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001166 | 1 | Each |
| 54 | 54 | Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry 'enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001167 | 1 | Each |
| 55 | 55 | Supplying and laying 25 mm X 5 mm G.l strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.l. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.l. nut bolt & spring washer spaced at 50mm) complete & as directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001168 | 102 | Rmt |
| 56 | 56 | Supply and Installation of Solar Street Lamps on site including battery complete /as per c.p.w.d specification, directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001169 | 15 | nos |
| 57 | 57 | Supply and Installation 0.60m heigh concealed light bollard complete /as per c.p.w.d specification , directed by Engineer-in- Charge. | BI01010001010000000000000515BI0100001170 | 23 | nos |
AI Tender Summary
Tender Timeline
Jan 08, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 18, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 18, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender