Military Engineer Services-MES has published Petty Repair For Attending Day To Day Em External Water Complaints At Rrrc Area Lorry Road Army Training Area And D K Part I And Allied Area In The Area Of Age U Ws No Ii Under Ge U Water Supply Delhi Cantt 10. Submission Date for this Tender is 03-02-2021. Electromechanical Work Tenders in GE U WATER SUPPLY DELHI CANTT 10 Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-Jan-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-02-2021 |
| Name of Work: PETTY REPAIR FOR ATTENDING DAY TO DAY E/M EXTERNAL WATER COMPLAINTS AT RRRC AREA, LORRY ROAD, ARMY TRAINING AREA AND D K PART-I AND ALLIED AREA IN THE AREA OF AGE (U) W/S NO II UNDER GE (U) WATER SUPPLY, DELHI CANTT - 10 | |||||
|---|---|---|---|---|---|
| S.No | Description of work | Item Code / Make | Quantity | Units | |
| 1 | 1 | Labour only for attending day to day external/treated water supply complaints of all nature i.e leakage in water supply pipe lines , fitting/fixture, over flow of overhead tank, no water supply,taking out water from trenches during repair including noting the complaints in complaint register complete all as specified and as directed. (Any material required for attending complaints shall be measured and paid separately under respective item herein after) Note :- quoted rates include notes mentioned at srl No. 3 (i) to 3 (ix). | 2400 | Each Job | |
| 2 | 2 | Labour only for attending of Electric supply compliants of day to day maintenace of existing LT Panels including connecting electrical accessories / spares of water supply installation and electrical fitting & light, short circuits in Pump house complete all as specified and as directed. (Any material required for attending complaints shall be measured & paid separately under respectvie item hereinafter)\nNote :- Quoted rates include notes mentioned at srl No. 3 (i) to 3 (ix) | 70 | Each Job | |
| 3 | 3 | Notes for item No. 1.00 & 2.00 (i) The complaints shall be attended and the defects shall be rectified by a team of expert and experienced electrician/plumber as applicable assisted with adequate No of helpers complete all as specified and as directed. | |||
| 4 | 3.01 | (ii) The complaints shall be attended and defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 250/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues.Contractor rep shall be available wef 0800 hrs to 2000 Hrs to receive and notify the complained | |||
| 5 | 3.02 | (iii) In case, after checking and attending the defect, it is not possible to rectify the defects within 08 hrs the facts shall be brought to the notice of Engineer-in -charge by the contractor /his rep . If Engineer -in-charge is satisfied with contractors view, no recovery will be made. | |||
| 6 | 3.03 | (iv) while attending the complaint of water supply /Electric supply if earth work is required then the same shall be measured and paid seperately under appropriate item of Sch 'A' . However no extra payments shall be made for dewatering.\n | |||
| 7 | 3.04 | (v) Cutting of GI pipe in position and threading is also deemed to be included in the job rate (Fitting and fixtures will be measured and paid separetely under respective item of Sch A. | |||
| 8 | 3.05 | (vi) All T & P required for attending the complaints shall be provided by the contracor. | |||
| 9 | 3.06 | (vii) The pipe fitter shall always be in possession of die set complete with cutters , Taps , Pipe wrench, Chain wrench,Caulking tools, Complete set of spanners and ladders etc…, as required at site. | |||
| 10 | 3.07 | (viii) The elecrician shall always be in possession of all Electrician tools , LT Megger, Earth tester , Multimeter , Crimping tool, insulation tape, Hand gloves etc required at site. | |||
| 11 | 4 | Supply only GI Socket, heavy duty, ISI Marked complete all as specified and as directed of following sizes. | |||
| 12 | 4.01 | 15 mm bore\n | 60 | EACH | |
| 13 | 4.02 | 20 mm bore | 120 | EACH | |
| 14 | 4.03 | 25 mm bore | 60 | EACH | |
| 15 | 4.04 | 40 mm bore | 10 | EACH | |
| 16 | 4.05 | 50 mm bore | 30 | EACH | |
| 17 | 4.06 | 80 mm bore | 5 | EACH | |
| 18 | 5 | Supply only GI Elbow, heavy duty, ISI Marked complete all as specified and as directed of following sizes. | |||
| 19 | 5.01 | 15 mm bore\n | 60 | EACH | |
| 20 | 5.02 | 20 mm bore | 120 | EACH | |
| 21 | 5.03 | 25 mm bore | 60 | EACH | |
| 22 | 5.04 | 40mm bore | 10 | EACH | |
| 23 | 5.05 | 50mm bore | 20 | EACH | |
| 24 | 6 | Supply only GI Union, medium grade, ISI Marked complete all as specified and as directed of following sizes. | |||
| 25 | 6.01 | 15 mm bore\n | 80 | EACH | |
| 26 | 6.02 | 20 mm bore | 130 | EACH | |
| 27 | 6.03 | 25 mm bore | 60 | EACH | |
| 28 | 6.04 | 40 mm bore | 10 | EACH | |
| 29 | 6.05 | 50 mm bore | 30 | EACH | |
| 30 | 7 | Supply only GI Nipple of different length as per requirement, both end screwed Medium Grade, ISI marked of following sizes:- | |||
| 31 | 7.01 | 15 mm bore\n | 60 | EACH | |
| 32 | 7.02 | 20 mm bore | 120 | EACH | |
| 33 | 7.03 | 25 mm bore | 60 | EACH | |
| 34 | 7.04 | 40mm bore | 10 | EACH | |
| 35 | 7.05 | 50mm bore | 30 | EACH | |
| 36 | 8 | Supply only PVC 'L' type Holder suitable for Aluminium rod,Float Ball etc complete all as specified and as directed | |||
| 37 | 8.01 | 15 mm bore | 10 | EACH | |
| 38 | 8.02 | 20 mm bore | 10 | EACH | |
| 39 | 8.03 | 25 mm bore | 5 | EACH | |
| 40 | 9 | Supply only GI reducing socket, medium grade, ISI Marked complete all as specified and as directed of following sizes. | |||
| 41 | 9.01 | 25 mmx15mm bore\n | 30 | EACH | |
| 42 | 9.02 | 20mmx15mm bore | 40 | EACH | |
| 43 | 9.03 | 25 mm x 20 mm bore | 20 | EACH | |
| 44 | 9.04 | 50 mmx 40mm bore | 10 | EACH | |
| 45 | 9.05 | 40 mmx 20mm bore | 5 | EACH | |
| 46 | 9.06 | 40 mmx 25mm bore | 5 | EACH | |
| 47 | 9.07 | 50mmx 25mm bore | 10 | EACH | |
| 48 | 9.08 | 80 mm x50/40/25mm bore | 10 | EACH | |
| 49 | 10 | Supply only GI Tee, Medium Grade, complete all as specified and as directed of following sizes | |||
| 50 | 10.01 | 15mm x15mm x15mm\n | 40 | EACH | |
| 51 | 10.02 | 20 mm x 20 mm x 15 mm | 80 | EACH | |
| 52 | 10.03 | 20 mm x 20 mm x 20 mm | 120 | EACH | |
| 53 | 10.04 | 25 mm x 25 mm x 25 mm | 30 | EACH | |
| 54 | 10.05 | 25 mm x 25 mm x 15 mm | 20 | EACH | |
| 55 | 10.06 | 25 mm x 25 mm x 20 mm | 15 | EACH | |
| 56 | 10.07 | 40 mm x 40 mm x 40 mm | 5 | EACH | |
| 57 | 10.08 | 40 mm x 40 mm x 20 mm | 5 | EACH | |
| 58 | 10.09 | 40 mm x 40 mm x 25 mm | 5 | EACH | |
| 59 | 10.1 | 50 mm x 50 mm x 50 mm | 10 | EACH | |
| 60 | 10.11 | 50 mm x 50 mm x 25 mm | 5 | EACH | |
| 61 | 10.12 | 50 mm x 50 mm x 20 mm | 10 | EACH | |
| 62 | 11 | Supply only GI plug, solid, heavy duty, complete all as specified and as directed of following sizes. | |||
| 63 | 11.01 | 15mm bore \n | 15 | EACH | |
| 64 | 11.02 | 20 mm bore | 30 | EACH | |
| 65 | 11.03 | 25 mm bore | 25 | EACH | |
| 66 | 11.04 | 40 mm bore | 10 | EACH | |
| 67 | 11.05 | 50 mm bore | 10 | EACH | |
| 68 | 12 | Supply Only lead pig bar complete all as specified and as directed. | 220 | KG | |
| 69 | 13 | Supply Only Spurn Yarn complete all as specified and as directed. | 60 | KG | |
| 70 | 14 | Supply Only Lead wool complete all as specified and as directed. | 30 | KG | |
| 71 | 15 | Supply Only Gland Packing any size complete all as specified and as directed. | 5 | KG | |
| 72 | 16 | Supply only M-seal in 500 gm pack complete all as specified and as directed. | 15 | PER PACK | |
| 73 | 17 | Supply Only 3 mm thick rubber gasket complete all as specified and as directed.\n | 15 | EACH | |
| 74 | 18 | Supply only 25 to 150 mm long, 6 to 20 mm dia nuts, bolts & washers complete all as specified and as directed.\n | 20 | KG | |
| 75 | 19 | Supply only Gun metal air release valve, 25 mm bore as per IS complete all as specified and as directed. | 10 | EACH | |
| 76 | 20 | Tank nipple suitable for HDPE water tank 20 mm dia | 40 | EACH | |
| 77 | 21 | Supply only PTMT float valve with epoxy coated aluminium rod and high density plastic ball of following sizes complete all as specified and as directed. | |||
| 78 | 21.01 | 15mm bore \n | 180 | EACH | |
| 79 | 21.02 | 20 mm bore | 350 | EACH | |
| 80 | 21.03 | 25 mm bore | 50 | EACH | |
| 81 | 21.04 | 50 mm bore | 5 | EACH | |
| 82 | 22 | Supply only gun metal gate valve with iron wheel head screwed both ends for iron pipe , ISI marked , as per IS : 778 of following sizes complete all as specified and as directed. | |||
| 83 | 22.01 | 15mm bore \n | 25 | EACH | |
| 84 | 22.02 | 20 mm bore | 40 | EACH | |
| 85 | 22.03 | 25 mm bore | 20 | EACH | |
| 86 | 22.04 | 40 mm bore | 10 | EACH | |
| 87 | 22.05 | 50 mm bore | 15 | EACH | |
| 88 | 23 | Testing of drining water collected from local source (bore wells /shallow wells in the area of AGE(U) W/S No.II and submission of detailed test report to the office of Engineer-in-Charge. \n(i) Carrying out minimum essential testing of water as per IS 10500-2012 mandatory for chemical colour, odour, taste, turbidity, PH value, TDS total hardness, iron, chloride, fluoride and residual free chlorine and Bacteriological total coliform organisms per 100 ml (MPN) and E Coli in 100 ml) with specific recommendation regarding suitability of water for drinking purposes. \n(ii) Collection of water from[ different sources of water ie. Sump, bore wells & shallow well in a sterilized bottle and testing in NABL Approved laboratory as mentioned in specification \nNote :- Rate Quoted shall also deemed to be included for the followings:- \n (i) Cost of sterilized bottle as required. \n(ii) To and fro transportation charges for collection of samples from source (sump, bore & shallow wells) | 10 | EACH JOB | |
| 89 | 24 | Excvation in trenches not exc. 1.5 mtr wide and not exc 1.5 mtr deep for pipe line in soft/loose soil, getting out and levelling of bottom surface to required complete all as specified and as directed. | 220 | CUM | |
| 90 | 25 | Returning filling, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed. | 198 | CUM | |
| 91 | 26 | Removing excavated material from site to a distance not exc 50 m away and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed. | 22 | CUM | |
| 92 | 27 | Surface dressing of uneven surfaces of the natural ground, rough excavated surfaces and filled area where ordered shall be trimed to an even surface horizontal or slopping, by removing vegetation and by scrapping high patches and filling low patches with the scrapping soil to given an even and neat look to the site. depth of cutting not exceeding 15 cm. complete all as specified and as directed. | 100 | PER SQM | |
| 93 | 28 | Supply only 15 mm bore Bib tap of PTMT, any tint, high pressure screwed for male/ female threaded, for pipe of size 15 mm bore complete all as specified and as directed | 210 | EACH | |
| 94 | 29 | Labour work required for taking out suction pipe 80 mm to 200 mm bore from sump of any capacity, dismantling of foot valve screwed / flanged type, and relowering after refixing in position the same duly cleaned / minor repair if any required such as replacement of rubber gasket/ lifting bolts & nuts including making thread for the suction pipes off sizes etc complete all as required and as directed. | 10 | EACH JOB | |
| 95 | 30 | Supply only 'stem' made out from SS (all as per sample) of sluice valve of size as under : - | |||
| 96 | 30.01 | 80 mm bore | 1 | EACH | |
| 97 | 30.02 | 100 mm bore | 2 | EACH | |
| 98 | 30.03 | 150 mm bore | 2 | EACH | |
| 99 | 30.04 | 200 mm bore | 1 | EACH | |
| 100 | 31 | Supply only 'stem nut' made out from stainless steel suitable to match with existing sluice valve of sizes as under : - | |||
| 101 | 31.01 | 80 mm bore | 1 | EACH | |
| 102 | 31.02 | 100 mm bore | 2 | EACH | |
| 103 | 31.03 | 150 mm bore | 2 | EACH | |
| 104 | 31.04 | 200 mm bore | 1 | EACH | |
| 105 | 32 | Supply only 'gland plate' made out CI, suitable to match with existing sluice valve of sizes as under : | |||
| 106 | 32.01 | 80 mm bore | 1 | EACH | |
| 107 | 32.02 | 100 mm bore | 2 | EACH | |
| 108 | 32.03 | 150 mm bore | 2 | EACH | |
| 109 | 32.04 | 200 mm bore | 1 | EACH | |
| 110 | 33 | Supply & Fixing rotational moulded Poly-ethylene ISI water storage tanks (cylindrical vertical with closed top) of cap 500 Ltrs hoisted and fixed in position at building top. | 2 | EACH | |
| 111 | 34 | Ditto, but cap of 1000 Ltrs PVC water storage tank | 2 | EACH | |
| 112 | 35 | Taking up or down steel tubing with connection including cleaning for removal complete all as specified and as directed of the follwing sizes :- | |||
| 113 | 35.01 | 15 mm dia | 200 | RM | |
| 114 | 35.02 | 20 mm dia | 370 | RM | |
| 115 | 35.03 | 25 mm dia | 220 | RM | |
| 116 | 35.04 | 40 mm dia | 100 | RM | |
| 117 | 35.05 | 50 mm dia | 150 | RM | |
| 118 | 36 | Relaying/refixing only jointing and testing of old GI pipes including cleaning completely in trenches complete all as specified and as directed for the following sizes :- | |||
| 119 | 36.01 | 20 mm dia | 70 | RM | |
| 120 | 36.02 | 25 mm dia | 70 | RM | |
| 121 | 36.03 | 40 mm dia | 40 | RM | |
| 122 | 36.04 | 50 mm dia | 50 | RM | |
| 123 | 37 | Supplying and fixing GI pipe medium grade ISI marked including all fittings in old/new position as in walls and ceilling complete all as specified and as directed of following sizes :- | |||
| 124 | 37.01 | 15 mm dia | 100 | RM | |
| 125 | 37.02 | 20 mm dia | 100 | RM | |
| 126 | 37.03 | 25 mm dia | 50 | RM | |
| 127 | 37.04 | 40 mm dia | 20 | RM | |
| 128 | 38 | Supplying and fixing GI pipe medium grade ISI marked including all fittings in old/new position as in trenches complete all as specified and as directed of following sizes :- | |||
| 129 | 38.01 | 15 mm dia\n | 100 | RM | |
| 130 | 38.02 | 20 mm dia | 200 | RM | |
| 131 | 38.03 | 25 mm dia | 100 | RM | |
| 132 | 38.04 | 40 mm dia | 40 | RM | |
| 133 | 38.05 | 50 mm dia | 100 | RM | |
| 134 | 39 | Labour for cutting and screwing existing steel tubing for alteration or addition complete all as specified and as directed of the following sizes :- | |||
| 135 | 39.01 | 15mm bore \n | 10 | EACH | |
| 136 | 39.02 | 20 mm bore | 10 | EACH | |
| 137 | 39.03 | 25 mm bore | 10 | EACH | |
| 138 | 39.04 | 40 mm bore | 5 | EACH | |
| 139 | 39.05 | 50 mm bore | 5 | EACH | |
| 140 | 40 | Supply only cast iron/ DI fitting for flanged /spigot and socketed pipes such as bends , reducer, tee pieces , tail pieces , collar, cross , caps & plug upto 150mm bore | 250 | KG | |
| 141 | 41 | Taking up or down Cast Iron/Cemented water mains (including all fittings) with spigot & socket ends and lead/tyton joints including burning out lead joints and recovering lead complete all as specified and directed of the following sizes :- | |||
| 142 | 41.01 | 80 mm bore \n | 64 | RM | |
| 143 | 41.02 | 100 mm bore | 140 | RM | |
| 144 | 41.03 | 150 mm bore | 140 | RM | |
| 145 | 41.04 | 200 mm bore | 33 | RM | |
| 146 | 42 | Relaying/ Refixing only in trenches CI/DI pipes with socket and spigot ends, cleaning thoroughly and removal of all blockages if any complete all as specified and as directed for the following size/bore of pipes. \nNote : Joints and CI/DI fittings shall be measured and paid seperately | |||
| 147 | 42.01 | 80 mm bore | 20 | RM | |
| 148 | 42.02 | 100 mm bore | 40 | RM | |
| 149 | 42.03 | 150 mm bore | 40 | RM | |
| 150 | 42.04 | 200 mm bore | 11 | RM | |
| 151 | 43 | Supplying, laying, jointing, testing and commmisioning of DI Pipe as per IS 8329, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches including tyton joint(Rubber gasket joint) all complete all as specified and as directed by site for the following sizes :- | |||
| 152 | 43.01 | 80 mm bore | 44 | RM | |
| 153 | 43.02 | 100 mm bore | 100 | RM | |
| 154 | 43.03 | 150 mm bore | 100 | RM | |
| 155 | 43.04 | 200 mm bore | 22 | RM | |
| 156 | 44 | Supply, fixing, jointing & testing Cast Iron Sluice Valve of sizes as under, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body, confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top including taking out unsv sluice valve complete all as specified and as directed.\nNote:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item. | |||
| 157 | 44.01 | 100 mm bore | 1 | EACH | |
| 158 | 44.02 | 150 mm bore | 2 | EACH | |
| 159 | 45 | Supply, fixing, jointing and testing of Cast iron Non Return valve without by pass arrangement, swing type, confirming to IS 5312, flanged ends pressure rating PN 1.0 complete including taking out unsv NRV complete all as specified and as directed. \nNote:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item. | |||
| 160 | 45.01 | 100 mm bore | 2 | EACH | |
| 161 | 45.02 | 150 mm bore | 2 | EACH | |
| 162 | 46 | Supply and fixing CI foot valve flanged ends, swing type opration with rubber sheet, as per IS:4038 including taking out unsv foot valve complete all as specified and as directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item. | |||
| 163 | 46.01 | 100 mm bore | 2 | EACH | |
| 164 | 46.02 | 150 mm bore | 2 | EACH | |
| 165 | 47 | Supply, installation and testing of flanged ends water meter ISI marked woltman type, Class 'B' of following sizes and making good connection with flanged ends, with gasket rubber sheet and nut & bolts fixing in horizontal/inclind/vertical position, including taking out unsv water meter complete all as specified and as directed. \nNote :- Flange joints including jointing materials shall deemed to be included in the unit rate of this item. | |||
| 166 | 47.01 | 100 mm bore | 1 | EACH | |
| 167 | 47.02 | 150 mm bore | 1 | EACH | |
| 168 | 48 | Supply and fixing for mild steel work for manhole cover, stair case steps made of MS angle/ flats/channels etc including cutting out top and bottom to shape as directed, drilling holes, notching for wire etc flat iron fillets including all necessary drilling, bolting or rivetting etc and similar works confirming to Fe-290, Gde E-165 and applying two coats of synthetic enamel paint over a coat of red oxide primer including preperation after demolition of existing covers,steps etc complete all as specified and as directed. | 240 | KG | |
| 169 | 49 | Material and labour for painting on steel and iron surfaces with one coat of synthetic enamel paint as per existing colour scheme or pattern after preperation of old painted surface of any description over 10cm in width or girth complete all as specified and as directed. | 100 | SQM | |
| 170 | 50 | Multipurpose Grease lubricant for Motors & Pumps | 5 | KG | |
| 171 | 51 | Supply and fixing in replacement LED batten arrow for multi application suitable for 18 Watts with & including necessary cable connection to make it functional complete all as specified and as directed. | 10 | NOS | |
| 172 | 52 | Supply only the following items :- | |||
| 173 | 52.01 | Switch Piano flush type 5 amps single pole one way 240 volts | 25 | EACH | |
| 174 | 52.02 | Switch Piano flush type 15 amps, single pole, one way 240 volts. | 10 | EACH | |
| 175 | 52.03 | Switch Socket outlet 3 pin, 5 amps 240 volts | 10 | EACH | |
| 176 | 52.04 | Switch Socket outlet 3 pin, 15 amps 240 volts | 10 | EACH | |
| 177 | 52.05 | MCB SP 6 to 32 Amp, 240 Votls | 10 | EACH | |
| 178 | 53 | An amount of Rs 64080.00 shall be deducted from BOQ on account of schedule of credit |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
