Military Engineer Services-MES has published Comprehensive Maintenance Of Rr Colony And Adjoining Area Age Br-1 And Petty Repair Of E/M Work To Raj Rif Centre ( Rrrc ) Artrac Hut Cc Hut Other Misc Works Of E/M Nature Under Ge ( Central ) Delhi Cantt Comprehensive Maint Of Rr Colony And Adjoi. Submission Date for this Tender is 02-02-2021. Electromechanical Work Tenders in GE (Central) Delhi Cantt Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Jan-2021 | Revised makes C77 | Other | 26-01-2021 |
| 2 | 26-Jan-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-02-2021 |
| Name of Work :COMPREHENSIVE MAINT OF , RR COLONY AND ADJOINING AREA AGE BR-1 AND PETTY REPAIR OF E/M WORK TO RAJ RIF CENTRE (RRRC) ARTRAC HUT , CC HUT & OTHER MISC WORKS OF E/M NATURE UNDER GE (CENTRAL) DELHI CANTT. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Code / Make | Quantity | Units | ||
| 1 | 1 | Taking down chowkats or frames not exceeding 1.5 Sqm each (w/o taking off shutters from the frames ) complete all as specified and directed by Engineer-in-Charge | 20 | Each | |
| 2 | 2 | All as per item No 1 above but exceeding 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed by Engineer-in-Charge | 30 | Each | |
| 3 | 3 | Refixing of shutters of any description area exc 1 sqm and not exc 2 sqm and re-fixing in same opening Including making good the dtanbed Surfaces complete all as specified and directed by Engineer-in-Charge | 3 | EACH | |
| 4 | 4 | All as per Srl item No 3 above but area exceeding 2 sqm complete all as specified and directed by Engineer-in-Charge | 3 | Per leaf | |
| 5 | 5 | Demolition of cement concrete (unreinforced) as in ground floors and pavings not exceeding 15 cm thickness (below of above ground level) by breaking up and disposal of rubbish and debris to a distance not exceeding 100m all as directed by Engr-in-Charge. | 8 | Cum | |
| 6 | 6 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge | 1 | Cum | |
| 7 | 7 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scurbing down with water etc and preparing old walls to receive plaster Coplete complete all as specified and directed by Engineer-in-Charge | 400 | Sqm | |
| 8 | 8 | Taking up or down steel water tubing and connections, 15 mm bore incl cleaning for refixing or removal at store.coplete complete all as specified and directed by Engineer-in-Charge. | 650 | RM | |
| 9 | 9 | All as per item No 8 above but 20 mm bore complete all as specified and directed by Engineer-in-Charge | 900 | RM | |
| 10 | 10 | M&L for PCC 1:3:6 type C1 as in back filling of pressed steel door frames complete all as specified and directed by Engineer-in-Charge | 8 | Cum | |
| 11 | 11 | M&L for cement concrete Type B1 1:2:4 (using 20 mm graded crushed stone aggregate) as in PCC blocks for holdfasts, benching, coping and the like including cweathering,slightly rounded or chamfered angles complete all as specified and directed by Engineer-in-Charge | 1.6 | Cum | |
| 12 | 12 | S&F pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete all as specified and directed by Engineer-in-Charge | 60 | RM | |
| 13 | 13 | All as per serial item No 13 above but 105x60mm complete all as specified and directed by Engineer-in-Charge | 60 | RM | |
| 14 | 14 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-Charge | 18 | Sqm | |
| 15 | 15 | All as per Srl item No 15 above but without glazing bars complete all as specified and directed by Engineer-in-Charge | 18 | Sqm | |
| 16 | 16 | S&F steel ventilators with top hung shutters including hinges and handle with steel peg stay complete welded complete all as specified and directed by Engineer-in-Charge | 3 | Sqm | |
| 17 | 17 | S&F factory made (two Panels ) with lock rail &panel of 9mm thick plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board wA commercial face veneers complete all as specified and directed by Engineer-in-Charge | 45 | Sqm | |
| 18 | 18 | S&F 35 mm thick Factory made glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats using 2nd class hardwood complete all as specified and directed by Engineer-in-Charge | 45 | Sqm | |
| 19 | 19 | S & F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face pannel, commercial type on both sides. Flush shutters shall have teak wood edging as specified in IS and magic eye, complete all as specified and directed by Engineer-in-Charge | 55 | Sqm | |
| 20 | 20 | S&F GI mild steel wire cloth, 40mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge | 23 | Sqm | |
| 21 | 21 | All as per item No 20 above but fixed in repair complete all as specified and directed by Engineer-in-Charge | 230 | Sqm | |
| 22 | 22 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge | 60 | RM | |
| 23 | 23 | S&F Factory made solid moulded door shutter, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge | 17 | Sqm | |
| 24 | 24 | S&F Butt hinges 100 mm medium weight cold rolled mild steel cumplet all has specifide complete all as specified and directed by Engineer-in-Charge | 60 | Each | |
| 25 | 25 | All as per item No 27 but 75 mm size complete all as specified and directed by Engineer-in-Charge | 30 | Each | |
| 26 | 26 | S&F Mild pressed steel handles, 150 mm size, oval type stove enamelled black complete all as specified and directed by Engineer-in-Charge | 30 | Each | |
| 27 | 27 | All as per item No 29 but 125 mm size complete all as specified and directed by Engineer-in-Charge | 10 | Each | |
| 28 | 28 | S&F MS tower bolts 150 mm size stove enamelled black complete all as specified and directed by Engineer-in-Charge | 30 | Each | |
| 29 | 29 | All as per item No 31 but 100 mm size complete all as specified and directed by Engineer-in-Charge | 20 | Each | |
| 30 | 30 | S&F 250 mm size mild steel sliding door bolts plate type, stove enamelled black with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolts (four on bolt plate and two on staple plate complete all as specified and directed by Engineer-in-Charge | 20 | Each | |
| 31 | 31 | S&F extruded alum alloy handles size 150 mm fabricated type anodised complete all as specified and directed by Engineer-in-Charge | 20 | Each | |
| 32 | 32 | S&F Aluminium anodized barrel tower bolts 150 mm long of extruded section. complete all as specified and directed by Engineer-in-Charge | 40 | Each | |
| 33 | 33 | Hacking out old broken glass (any thickness size, quality or description from wooden frames glazed with putty/beads complete all as specified and directed by Engineer-in-Charge | 300 | Sqm | |
| 34 | 34 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n . Exc 0.50 sqm in each pane complete all as specified and directed by Engineer-in-Charge | 300 | Sqm | |
| 35 | 35 | M&L mild steel bars to 8mm dia and above cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) nor less than 0.9mm dia or securing with clips quality conforming to FE-410-W (Gde E-250 quality-A or Fe 290 (Fde-E-165) complete all as specified and directed by Engineer-in-Charge | 43 | Per Kg | |
| 36 | 36 | M&L formwork to chullah hoods, chajjas, troughs and similar items including edges rough finished surfacs complet complete all as specified and directed by Engineer-in-Charge | 7 | Sqm | |
| 37 | 37 | M&L for reinforced cement concrete (nominal mix) Type B1 1:2:4 using 20mm graded aggregate in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge | 0.5 | Cum | |
| 38 | 38 | M&L 25 mm thick cement concrete 1:2:4 type B1 (20 mm graded aggregate) rough finished surfacs complet complete all as specified and directed by Engineer-in-Charge | 160 | Sqm | |
| 39 | 39 | All as per item No 41 but 50 mm size complete all as specified and directed by Engineer-in-Charge | 60 | Sqm | |
| 40 | 40 | M&L cement concrete 50mm thick type C-1, 1:3:6 as in plinth protection complete all as specified and directed by Engineer-in-Charge | 60 | Sqm | |
| 41 | 41 | S&F vitrified colour tiles 600x600x9 to10mm thick as in floor set and jointed in neat cement slurry and pointing in white or coloured cement to match the colour of tiles over and including screed bed 15mm thick in CM 1:4 complete all as specified and directed by Engineer-in-Charge | 90 | Sqm | |
| 42 | 42 | ALL as per srl item No 41 above but as in skirting/dado complete all as specified and directed by Engineer-in-Charge | 6 | Sqm | |
| 43 | 43 | S&F non-skid coloured of approved shade ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:4 complete all as specified and directed by Engineer-in-Charge | 300 | Sqm | |
| 44 | 44 | S&F glazed coloured ceramic tiles in vertical surface 400x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm plaster of CM (1:4) complete all as specified and directed by Engineer-in-Charge | 470 | Sqm | |
| 45 | 45 | M&L machine cut kota stone slab flooring 18 TO 20 mm thick over Incl 20mm thick cement screed bed in CM 1:6, laid and jointed with grey cement and pointed with white cement mixed with pigment to match the shade of the stone including rubbing, polishing complete all as specified and directed by Engineer-in-Charge | 45 | Sqm | |
| 46 | 46 | All as per Srl item No 45 above but on vertical surfaces in over 10mm plaster of CM 1:4 complete all as specified and directed by Engineer-in-Charge | 2 | Sqm | |
| 47 | 47 | M&L 20mm thick marble tiles (Makrana white) machine cut as in flooring laid over Incl 20mm thick cement screed in CM (1:6) and jointed with grey cement slurry including cutting and polishing of type complete all as specified and directed by Engineer-in-Charge | 3 | Sqm | |
| 48 | 48 | M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over incl 20mm thick screed bed in CM 1:4 in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge | 30 | Sqm | |
| 49 | 49 | M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces firnished een and smooth without using extra cement up to hieght of four storey ,including scaffolding complete all as specified and directed by Engineer-in-Charge | 300 | Sqm | |
| 50 | 50 | M&L for rendering 15mm thick in CM 1:6 on fair faces or other than fair faces of brick work or concrete surfaces of walls firnished even and smooth without using extra cement in multistorey building , complete all as specified and directed by Engineer-in-Charge | 500 | Sqm | |
| 51 | 51 | M&L for 5mm thick rendering in cement mortar 1:3 finished even and smoothe surface without using extra cement on ceiling, chajja in multy storey building etc complete all as specified and directed by Engineer-in-Charge | 500 | Sqm | |
| 52 | 52 | M&L for preparation of newly plastered surfaces of wall and applying 2-3 mm thick birla wall care putty and apply two coat oil bond distemper over one coat of primer from the same manufacture complete all as specified and directed by Engineer-in-Charge | 500 | Sqm | |
| 53 | 53 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge | 500 | Sqm | |
| 54 | 54 | M&L for preparation of newly plastered surfaces of wall and apply two coat of cement base paint over one coat of primer from the same manufacture complete all as specified and directed by Engineer-in-Charge | 300 | Sqm | |
| 55 | 55 | Material and labour for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge | 120 | Sqm | |
| 56 | 56 | S&F tubes medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floors 15 mm bore complete all as specified and directed by Engineer-in-Charge | 650 | RM | |
| 57 | 57 | All as per item No 56 above but steel tubing 15mm bore complete all as specified and directed by Engineer-in-Charge | 900 | RM | |
| 58 | 58 | Refixing old steel water tubing 15mm obtained from item No 8 here in before complete all as specified and directed by Engineer-in-Charge | 300 | RM | |
| 59 | 59 | All as per item No 58 above but 20mm dia complerte all as specifieid and directed by Engineer-in-Charge. | 450 | RM | |
| 60 | 60 | Dismantling water tanks upto 500 Ltr capacity complete all as specified and directed by Engineer-in-Charge | 62 | Each | |
| 61 | 61 | S&F Rotational moulded polyethlene water storage taks 500 ltrs capacity (cylintrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I on stage complete all as specified and directed by Engineer-in-Charge. | 62 | Each | |
| 62 | 62 | S&F Stop cock cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions, 20mm bore and fixed complete all as specified and directed by Engineer-in-Charge. | 62 | Each | |
| 63 | 63 | S&F 20mm Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge. | 62 | Each | |
| 64 | 64 | S&F tubes medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floors 20 mm bore complete all as specified and directed by Engineer-in-Charge | 900 | RM | |
| 65 | 65 | Re-fixing old steel tubing 20mm bore complete all as specified and directed by Engineer-in-Charge | 10 | RM | |
| 66 | 66 | S&F in repair vitreous china squatting pan, 'Orrisa' pattern, size 580x440mm white, with integral foot rests, flush pipe including connection to trap, and to flushing pipe, anti-syphonage pipe, etc complete all as specified and directed by Engineer-in-Charge | 9 | Each | |
| 67 | 67 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white with flushing pipe, antisyphonage pipe, etc including all joints connection to drain (or outgoing pipe) and making good to the floor and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hanging device complete all as specified and directed by Engineer-in-Charge | 9 | Each | |
| 68 | 68 | S&F in repair PVC valveless, syphonic action type, flushing cistern, low level 10 ltr capacity, white with inlet, ball valve, float and handle including brackets including flushing pipe of polyethylene of low or high density or PVC 32mm dia and connections to pipes complete all as specified and directed by Engineer-in-Charge | 23 | Each | |
| 69 | 69 | S&F in repair wash basins size 550x400mm, vitreous china (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engineer-in-Charge | 17 | Each | |
| 70 | 70 | S&F 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge | 23 | Each | |
| 71 | 71 | S&F Gratings, fixed in repairs complete all as specified and directed by Engineer-in-Charge | 6 | Each | |
| 72 | 72 | S&F in repair chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge | 6 | Each | |
| 73 | 73 | S&F tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge | 6 | Each | |
| 74 | 75 | S&F 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete all as specified and directed by Engineer-in-Charge | 80 | Each | |
| 75 | 76 | S&F in repair bib taps 15mm bore chromium plated, fancy type, cast copper alloy with crutch butterfly handle screw down, screwed for iron pipe or for brass complete all as specified and directed by Engineer-in-Charge | 40 | Each | |
| 76 | 77 | Pillar taps fancy type cast copper alloy with chromium plated screwed down or high pressure with or w/o lettered hot or cold with long screwed shank and fly nuts for iron pipe fixed in repairs of 15mm bore complete all as specified and directed by Engineer-in-Charge. | 60 | Each | |
| 77 | 78 | S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer-in-Charge | 14 | Each | |
| 78 | 79 | S&F in repair 15mm stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge | 14 | Each | |
| 79 | 80 | All as per Srl item No 76 above but concealed type complete all as specified and directed by Engineer-in-Charge | 2 | Each | |
| 80 | 81 | M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primercomplete all as specified and directed by Engineer-in-Charge | 200 | Sqm | |
| 81 | 82 | All as per item No 81 above but two coat of cement base paint on old surface complete all as specified and directed by Engineer-in-Charge | 20 | Sqm | |
| 82 | 83 | M&L preparation of new plastered surface of walls and applying two coats of oil bound distemper over 3mm thick wall care putty complete all as specified and directed by Engineer-in-Charge | 200 | Sqm | |
| 83 | 84 | M&L preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge | 150 | Sqm | |
| 84 | 85 | M&L preparation of old decorated surface of walls and applying two coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge | 70 | Sqm | |
| 85 | 86 | M&L preparation of old decorated surface of walls and applying one coat of oil bound distemper complete all as specified and directed by Engineer-in-Charge | 100 | Sqm | |
| 86 | 87 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new or previously untreated wood and wood based surface incl preparation complete all as specified and directed by Engineer-in-Charge | 100 | Sqm | |
| 87 | 88 | M&L preparation of new of previously untreated steel or iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. | 60 | Sqm | |
| 88 | 89 | All as per Srl item No 87 above but one coat of synthetic enamel paint on old painted surface complete all as specified and directed by Engineer-in-Charge | 70 | Sqm | |
| 89 | 90 | All as per Srl item No 88 above but one coat of synthetic enamel paint on old painted surface complete all as specified and directed by Engineer-in-Charge. | 100 | Sqm | |
| 90 | 91 | S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge | 10 | Each | |
| 91 | 92 | S&F in repair stainless steel sink with drainage board made out of 1.00mm thick sheet of AISI 306 for kitchen with plug, washers, waste pipe including connecting union overall size 1145mm x 510mm x 200mm with bowl size 510mm x 400mm x 200 mm including taking out existing china ware sink with waste fittings complete all as specified and directed by Engineer-in-Charge | 70 | Each | |
| 92 | 93 | S&F in repair Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet of AISI 306 including taking out existing wooden plate rack, complete all as specified and directed by Engineer-in-Charge. | 70 | Each | |
| 93 | 94 | S&F in repair Stainless steel peg set of 06 peg, 45 centimeter long complete all as specified and directed by Engineer-in-Charge | 70 | Each | |
| 94 | 95 | S& F Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and directed by Engineer-in-Charge | 9 | Each | |
| 95 | 96 | Demolition of cement concrete (Un reinforced) in ground floors n.exc 15cm thick (above or below grnd level) complete all as specified and directed by Engineer-in-Charge | 2 | Cum | |
| 96 | 97 | M&L for cement concrete 75mm thick type C-2 1:3:6 (40mm graded aggregate) ,even and smooth finishes of paths laid in alternative panel complete all as specified and directed by Engineer-in-Charge. | 20 | Sqm | |
| 97 | 98 | M & L for mild steel framed work framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete(Fe-410-W(Gde-E-250)quality-A complete all as specified and directed by Engineer-in-Charge | 3700 | Kg | |
| 98 | 99 | Expahanded metal,to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed by Engineer-in-Charge. | 2300 | Kg | |
| 99 | 100 | M&L FOR MS lat for roof sheets and brassing, incl securing bolt,drilling holes and washer /using ERW OR Induction butt welded ,complete all as specified and directed by Engineer-in-Charge | 980 | Kg | |
| 100 | 101 | Supply and fix 300mm long, mild steel, sliding door bolt matt finish snot less than 16 mm dia bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts extruded section or cast aluminum alloy, complete all as specified and directed by Engineer-in-Charge | 40 | Each | |
| 101 | 102 | Supply and fix extruded aluminum alloy handles fabricated type anodised of size 150mm long complete all as specified and directed by Engineer-in-Charge. | 40 | Each | |
| 102 | 103 | M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks,old size , straightor curved on plan exceeding 6 m mean radius complete all as specified and directed by Engineer-in-Charge | 12 | Cum | |
| 103 | 104 | M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick work or concrete surfaces firnished een and smooth without using extra cement up to hieght of four storey ,including scaffolding complete all as specified and directed by Engineer-in-Charge | 120 | Sqm | |
| 104 | 105 | M & L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof kerbs , rounded or chamfered on edges complete all as specified and directed by Engineer-in-Charge | 11 | Cum | |
| 105 | 106 | Use and waste of form work for fair finished surfaces to soffits of suspended slabs such as roof slab, platforms and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed by Engineer-in-Charge | 19 | Sqm | |
| 106 | 107 | Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge | 230 | Sqm | |
| 107 | 108 | M&L for roof treatment as per the description below:-\na) Plain cement concrete average 50 mm thick 1:2:4 type B0 (using 12.5 mm graded stone aggrigate )for levelling course for providing slope in the roof @ 1:40 gradient.\n\nb) Apply bituminous primer @ 0.3 ltr/Sqm (conforming to IS-3384) on prepared surfaces. After drying of primer apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm of prepared surfaces.\n\nc) Laying APP (Atatic Polypropylene) modified five layered membrane 3 mm thick and weighing not less than 4 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification And apply two coat of silver aluminum paint complete all as specified and directed by Engineer-in-Charge . | 600 | Sqm | |
| 108 | 109 | M&L cleaning of roof surfaces by wire brushes and removing loose dust by air blower and spreading thin layer of sand over and includdign two coats of hot blown bitumen 85/25 @ 1.2 Kg per Sqm per coat complete all as specified and directed by Engineer-in-Charge | 100 | Sqm | |
| 109 | 110 | Checking electrical points for continuous electric supply system and replacement of unserviceable spares for all electrical fixtures, ceiling/exhaust fans of any size and capacity and carrying out minor repairs, fixing screws, tightening of loose wires, any type renewal of small pieces of electric wire upto 1.00 mtr length and maintenance work complete on all working days including holidays all as directed by Engr-in-charge, at RRRC | 3960 | Each Complaint | |
| 110 | 111 | Attending to complaint of unsv switch ,socket ,fan regulator and making of light / power point in casing caping upto 2 mtr of length and maintenance work complete on all working days including holidays all as directed by Engr-in-charge, at RRRC | 1800 | Each Complaint | |
| 111 | 112 | Attending to Geyser complaints at site including checking and rectification of any electric fault/ water leakage and making good in all respects including minor repairs, replacement of unserviceable spares, burnt copper wire connections wherever required and repairing any type of switch, socket, plug top etc at RRRC complete all as specified and directed. Notes for Item No. 1 to 4\n(a) fixtures / fittings shall be paid under relevant item against supply only.\n(b) Contractors are advised to visit the sites before quoting their rates.\n(c) Materials for minor and maintenance repair works as directed by Engineer-in-Charge shall be supplied by the contractor within one week from the date of issue of work order. \n(e) Contractor shall provide and deploy adequate experienced professional to carry out day to day complaints and must deploy 01 electrician and 01 helper at RRRC Complaint cell 0900 Hrs to 1700 Hrs from Monday to Sunday . Electrician and helper shall report to complaint cell at 0900 hrs daily ang get the job card for carry out the work and same will be retrun to concered JE at 1700 hrs as token of completion of job. In case of any breakdown/ emergency, contractor shall make arrangement to attend and rectify the complaints in odd hours on sunday/ holiday also. The rates quoted in sch 'A' respective items shall be deemed to be included and nothing extra shall be admissible on this account.\nNote: whatever be the nature of electrcal complaint the wholesole rectification responsibilty lies with the contractor. \n(f) Contractor shall be penalised @ Rs. 100/- per complaint per day, if he fails to attend the complaint within 4 hours.\n(g) All ser numbered complaint docket will be provided by contractor and amount of docket included in this.\n(h) Daily attendance register will be maintained by converned JE and if any electrician/ helper found absent on any working day then penalty @Rs 1000/- per day per workman will be recoverd from the contractor.\n | 1080 | Each Complaint | |
| 112 | 113 | Taking down sub main wiring of any size etc complete all as specified and directed by Engineer-in-Charge. | 320 | RM | |
| 113 | 114 | Supply, laying and drawing in existing concealed PVC rigid surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforming to IS : 694 of 1990 complete including connection complete all as specified and directed by Engineer-in-Charge. | 320 | RM | |
| 114 | 115 | Supply only single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed by Engineer-in-Charge. | 70 | Each | |
| 115 | 116 | Supply only LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts, > 2400 systems lumen outputwith lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed by Engineer-in-Charge. | 1240 | Each | |
| 116 | 117 | Supply only LED batten luminaire surface mounted 2 feet system wattage of 12 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level =100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed by Engineer-in-Charge. \n | 300 | Each | |
| 117 | 118 | Supply LED 9/10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6000K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed by Engineer-in-Charge. | 290 | Each | |
| 118 | 119 | Supply only surface ceiling mounted, round LED down light fitting 12 watts with die cast aluminium housing and system wattage of 12W, system efficacy at luminary level = 80 Lumens/watt, 50000 burning hours, 6500K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed by Engineer-in-Charge. | 110 | Each | |
| 119 | 120 | Supply only 14W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz complete all as specified and directed by Engineer-in-Charge. | 350 | Each | |
| 120 | 121 | Supply only 9 W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz, complete all as specified and directed by Engineer-in-Charge. | 450 | Each | |
| 121 | 122 | Supply only replacement of capacitor 3.15 Mfd, 240 V complete all as specified and directed by Engineer-in-Charge. | 325 | Each | |
| 122 | 123 | Supply only replacement of capacitor 2.5 Mfd, 240 V complete all as specified and directed by Engineer-in-Charge. | 450 | Each | |
| 123 | 124 | Supply only batten holder including with connections complete all as specified and directed by Engineer-in-Charge. | 450 | Each | |
| 124 | 125 | Supply only switch piano flush button type single pole one way 6 Amps complete all as specified and directed by Engineer-in-Charge. | 950 | Each | |
| 125 | 126 | Supply only switch piano 6 amp SP two way, complete all as specified and directed by Engineer-in-Charge. | 75 | Each | |
| 126 | 127 | Supply only socket piano outlet 6 Amp flush button type complete all as specified and directed by Engineer-in-Charge. | 425 | Each | |
| 127 | 128 | Supply only bell push single pole 6 Amps complete all as specified and directed by Engineer-in-Charge. | 50 | Each | |
| 128 | 129 | Supply only switch piano flush button type single pole 16 Amps complete all as specified and directed by Engineer-in-Charge. | 215 | Each | |
| 129 | 130 | Supply only socket piano outlet, 2 in 1, 3 pin 6 and 16 Amp single pole complete all as specified and directed by Engineer-in-Charge. | 150 | Each | |
| 130 | 131 | Supply only Ceiling fan regulator electronic step switch type 120 Watt 230/250 Volts single phase complete all as specified and directed by Engineer-in-Charge. | 350 | Each | |
| 131 | 132 | Supply only switch Modular type 6 Amps one way 230V AC complete all as specified and directed by Engineer in charge. | 90 | Each | |
| 132 | 133 | Supply only Modular socket outlet 5 pin 6 Amp socket 2 moduler complete all as specified and directed by Engineer in charge. | 50 | Each | |
| 133 | 134 | Supply only switch Modular type 16 Amps one way 230V AC complete all as specified and directed by Engineer in charge. | 65 | Each | |
| 134 | 135 | Supply only Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge. | 70 | Each | |
| 135 | 136 | Supply only Modular five stepped type electronic fan regulator 2 module 230V AC complete all as specified and directed by Engineer in charge. | 45 | Each | |
| 136 | 137 | Supply only swich & socket combined 5 pin 6 Amp sp complete all as specified and directed by Engineer-in-Charge. . | 200 | Each | |
| 137 | 138 | Supply only swich & socket combined 5 pin 16 Amp sp complete all as specified and directed by Engineer-in-Charge. | 175 | Each | |
| 138 | 139 | Supply only ceiling rose surface PVC 65x50 mm type with three terminals. (For Exhaust Fans) \n | 40 | Each | |
| 139 | 140 | Supply only relacement plug top 16 Amps 3 pin 230- volts complete all as specified and directed by Engineer-in-Charge. | 85 | Each | |
| 140 | 141 | Supply only Electric bell Ding-Dong AC 230 Volt etc complete all as specified and directed by Engineer-in-Charge. | 160 | Each | |
| 141 | 142 | Supply only plug top, 3 pin, 10/20 amp earth metal clad (ISI marked) as directed. | 40 | Each | |
| 142 | 144 | Supply only socket 3 pin 10/20 amp earth metal clad (ISI marked) as directed. | 45 | Each | |
| 143 | 145 | Supply only plug top, 3 pin, 5 Amp all as specified and directed by Engr-in-charge. | 80 | Each | |
| 144 | 146 | Supply only plug top, 3 pin, 15 Amp all as specified and directed by Engr-in-charge. | 80 | Each | |
| 145 | 147 | Supply only tape roll 25mm size 25 mtr length all as specified and directed by Engr-in-charge. | 150 | Each | |
| 146 | 148 | Supply only switch socket combination 15 Amp all as specified and directed by Engr-in-charge. | 60 | Each | |
| 147 | 149 | Supply only PVC Gang box surface type heavy duty suitable for single switch 5 Amps (ISI Marked) . | 80 | Each | |
| 148 | 150 | S & F PVC Gang box surface type heavy duty suitable for single 5 Amps switch & socket (ISI Marked) | 80 | Each | |
| 149 | 151 | S & F Gang box surface type heavy duty suitasble for 15 Amps switch and socket (ISI Marked) | 80 | Each | |
| 150 | 152 | Supply switch socket combination 5 Amp all as specified and directed by Engr-in-charge. | 45 | Each | |
| 151 | 153 | Supply only exhaust fan motor capacity 1/4 HP 230 volts suitable for 300 mm size exhaust fan complete all as directed. | 10 | Each | |
| 152 | 154 | Supply only Single pole MCB 6 to 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for 10 KA breaking capacity, complete all as specified and directed by Engineer-in-Charge. | 261 | Each | |
| 153 | 155 | Supply only in repair MCB SPN 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete. | 140 | Each | |
| 154 | 156 | Supply only in repair MCB SPN 32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer-in-Charge. | 190 | Each | |
| 155 | 157 | Supply only in repair MCB DP 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer-in-Charge. | 85 | Each | |
| 156 | 158 | Supply only in repair MCB DP 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer-in-Charge. | 60 | Each | |
| 157 | 159 | Supply only FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 1.5 sqmm with approved colour code complete all as specified and directed by Engineer-in-Charge. | 350 | RM | |
| 158 | 160 | Supply only FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 2.5 sqmm with approved coloured code complete all as specified and directed by Engineer-in-Charge. | 320 | RM | |
| 159 | 161 | Supply only FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 4 sqmm with approved coloured code complete all as specified and directed by Engineer-in-Charge. | 400 | RM | |
| 160 | 162 | Supply only heating element of 2 KW triangular type with nut bolt washer complete all as specified and directed by Engineer-in-Charge. . | 180 | Each | |
| 161 | 163 | Supply only heating element of 2 KW circular type with nut bolt washer complete all as specified and directed by Engineer-in-Charge. . | 60 | Each | |
| 162 | 164 | Supply only heating element of 1.5 KW triangular type with nut bolt washer complete all as specified and directed by Engineer-in-Charge. | 120 | Each | |
| 163 | 165 | Supply only non return valve 15mm dia (ISI Marked) for Geysers of 50/35/25 Ltr capacity including GI Socket,Nipple, elbow ,bend etc and connecting up complete all as directed. | 60 | Each | |
| 164 | 166 | Supply only for safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge. | 80 | Each | |
| 165 | 167 | S&F of thermostat for 25/35/50 ltrs capacity of geysers complete all as specified and directed by Engineer-in-Charge. | 110 | Each | |
| 166 | 209 | Note :- Total amount of Sch of credit is Rs. 83834.00 as per Sch of credit. Net contract sum shall be total quoted amount of bidder (-) amount of Sch of credit. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
