Indian Oil Corporation Limited-IOCL has published Pwrjt20050/Miscellaneous Structure Fabrication Work At Gauridad Pump Station Miscellaneous Structure Fabrication Work At Gauridad Pump Station. Submission Date for this Tender is 27-01-2021. Fabrication Work Tenders in WRPL Gauridad Gujarat. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Jan-2021 | Technical Corrigendum-I | Technical Bid | 20-01-2021 |
| 2 | 20-Jan-2021 | Date Corrigendum-I | Date | 27-01-2021 |
| Name of Work: Miscellaneous Structure fabrication work at Gauridad Pump Station | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Composite | |||
| 2 | 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, all works up to any lead and lift, as directed by the Engineer-in-Charge : | |||
| 3 | 3 | In all kinds of soil | 5 | CUM | |
| 4 | 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||
| 5 | 5 | 1:1.5:3 [1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources] | 2.5 | CUM | |
| 6 | 6 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. | 5 | CUM | |
| 7 | 7 | Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, claddings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cutting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including preparation of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGER or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of concrete work). | 7.75 | MT | |
| 8 | 8 | Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated 'J' or 'L' hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | |||
| 9 | 9 | 1.00 mm thick with zinc coating not less than 275 gm/sq.m. | 18.5 | SQM | |
| 10 | 10 | 12 mm cement plaster of mix : | |||
| 11 | 11 | 1:4 (1 cement : 4 fine sand) | 2 | SQM | |
| 12 | 12 | Fabricating and fixing the process pipe of 1.315" OD x 0.179"WT ASTM A 106 Gr B /A333 with required fittings | 203 | M | |
| 13 | 13 | Fabricating and fixing the process pipe of 2.375" OD x 0.218"WT ASTM A 106 Gr B /A333 with required fittings | 172 | M | |
| 14 | 14 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to Type-III of ASTM-D-4956-01 as approved by the Engineer-in-Charge, letters, borders etc. as per IRC:67:2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to Class-II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and directions of the Engineer-in-Charge. [Note: Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment] : | |||
| 15 | 15 | Overhead informatory road signage | 13.83 | SQM | |
| 16 | 16 | Finishing walls with water proofing cement paint of required shade : | |||
| 17 | 17 | New work (Two or more coats applied @ 3.84 Kg/10 sqm) | 50 | SQM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
