Repairing Of Lt Line Led Street Light Repairing Of Lt Line Led Street Light Etc
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Jan 2021
0 days left
EMD
1.93 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ROBERTSGANJ → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairing Of Lt Line Led Street Light Repairing Of Lt Line Led Street Light Etc
BOQ
| Name of Work:Repairing of L.T. line and S/F of LED Street light & Cabling work NMY RobertsganjNote-(1) Above Rate are without GST. (2) GST will be paid extra maximum 12% on the above cost as per GST Rule. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 65 and above Protection complete in all respect. 1424 | 1424 | 76 | Nos. |
| 2 | 2 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 501(c) 16 sq. mm 2 core | 501 C | 300 | Mtr. |
| 3 | 3 | 501(k) 35 sq. mm 3.5 core | 501 K | 100 | Mtr. |
| 4 | 4 | 501(r) 240 sq. mm 3.5 core | 501 R | 300 | Mtr. |
| 5 | 5 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503(C) 16 sq. mm 2 core | 503 C | 16 | Nos. |
| 6 | 6 | 503 (r ) 240sqmm 3-1/2 core | 503 R | 4 | Nos. |
| 7 | 7 | 503 (k) 35sqmm 3.5 core | 503 K | 4 | Nos. |
| 8 | 8 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 504 (C) 16 sqmm | 504 C | 31 | Nos. |
| 9 | 9 | 504 (m) 240sqmm | 504 m | 12 | Nos. |
| 10 | 10 | 504 (f) 35sqmm | 504 f | 35 | Nos. |
| 11 | 11 | Supply & erection of “D” clamps of 50mm x 6mm flat iron on steel tubular poles/steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. 623 | 623 | 24 | Nos. |
| 12 | 12 | Supply & fixing of 100mm x 100mm shackle insulator/100mm x 80mm pin insulator including G.I. Bolts/spindle nuts etc. complete in all respects. 621 | 621 | 59 | Nos. |
| 13 | 13 | Supply & fixing of 230mm x 32mm x 1.5mm galvanized steel strips including holes for shackle insulators pins and bolts etc. complete in all respects. 622 | 622 | 30 | Nos. |
| 14 | 14 | Supply & erection of stay set at 3.5 Metres away from the pole complete with galvanised 19mm dia x 1.80 Metre long stay rod, 30 cm x 30 x 6.3mm anchor plate, thimble stay clamps, stay insulator, 19mm 600mm double screw tightener, 7/13.5mm G.I stay wire etc. in 1:3:6 cement concrete complete in all respects. 631 | 631 | 16 | Nos. |
| 15 | 15 | Supply & erection of hexagonal/cradle type gaused of G.I wire no. 8 to 4 SWG including binding etc. complete in all respects. 629 | 629 | 60 | Nos. |
| 16 | 16 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respects. 634 | 634 | 77 | Nos. |
| 17 | 17 | Supply & erection of overhead line with ACSR conductor on poles / service bracket including binding etc. complete in all respects. | 627 | 200 | Kg |
| 18 | 18 | To tighting of ACSR condoctor LR | 627 LR | 600 | Kg |
| 19 | 19 | Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect. | 628 | 70 | Kg |
| 20 | 20 | Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. 721 | 721 | 57 | Mtr. |
| 21 | 21 | Supply and burying of 600mm x 600mm x 6.0mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge completein all respects as per drawing (This will apply for earthing of poles also). 702 | 702 | 5 | Nos. |
| 22 | 22 | Dismentling/shifting /making foundation of damage pole.LR Only | 616 LR | 4 | Nos. |
| 23 | 23 | S/F of 100mm. dia G.I. pipe 14:13:3 DSR | DSR | 18 | Mtr. |
| 24 | 24 | S/F of 50mm. dia G.I. pipe 14:13:1 DSR | DSR | 12 | Mtr. |
| 25 | 25 | S&F of 100 A. 415 V Metal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect. 353 | 353 | 1 | Nos. |
| 26 | 26 | S/f of spacer APPD | APPD | 210 | Nos. |
| 27 | 27 | Supply and fixing of 200 Amp. Four pole hange over switch on 50 mm ×50 mm × 6 mm angle iron frame, including the cost of labour, T & P painting and other material required for proper completion of the work as per direction and satisfaction of E /I 379 | 379 | 1 | Nos. |
| 28 | 28 | Supply and Erracetion of factory fabricated and wired metal clad dust and vermin proof floor mounting M.S. channel Base with bottom and top cable entreis Electrical control panel with TNP MCCB’ s [ Four Pole 36 KA with thermal magnetic release] Switches Complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage current and other parameters [ KVA; P.F; KW etc] in each phase with touch type selector switches for different readings instrument fuses current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC\BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB’s shall be complete with suitable cable end boxes; compression glands and indicating lamp on incomingetc. The job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panle board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm\2mm. Cubicle type switch board shall be of cat A and B Only.\nIncoming.\n630Amp. MCCB –1No. \nOut going.\n 100 Amp.MCCB -5N0. and 63 Amp MCCB-2 No.\nCat. B. Pannel Cubical Type. \n | 814 A | 1 | JOB |
| 29 | 29 | Debuct in item no. 501 (a) 501 (t) and 506 (a) to (f) when cables is passed through G.I./M.S. or Hume pipe in road crossing or along the wall. The cost of the G.I. pipe, hume pipe is to be extra when and where required. 507\n | 507 | 30 | mtr |
AI Tender Summary
Tender Timeline
Jan 06, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 21, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 22, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender