Auto Controller With Time Switch-Gujarat

Supply Of , Auto Controller With Time Switch And Smart Logic Features Timer With Temperature Based Load For 3 Nos Air Conditioner As Per Tech Specification. As Per Following Details- 1] Latest Hi -Tech Micro Controller Based Technology 2] Lcd Display 16 Character And 2 Line With Backlit . 3] It Has Unique Controlling Programme Based On Real Time , To Set Ac Controller On/Off Auto As Per The Desired Time, Onsite Programmable .All Set Point Programmable From 4 Keypad. 4] Sequencing Of Ac Equal Run Hours Min. 5 Minute To 12 Hrs. 5] Room Temperature Setting 10 *C To 60 *C. 6] Hysteresis Programmable 1 * C To 5 *C. 7] Room High Temperature And Low Temperature Alarm Facility . 8] Temperature Calibration Facility Onsite. 9] Automatic Override Facility To Second Ac To 3Rd Ac .If Running Ac Goes Fail 10] It Controls 3 Air Conditioners 30%U201330-30 Amps. 3Nos Separate Heavy Duty Relay Output For 3 Ac. 11] Balance Time Show On Display. 12] Separate Phase Supply For Each A/C. 13] Direct Display Accurate Temperature Sensing By Precise Temperature Sensor. 14] Time Sharing For Compressors To Share Load Equally. 15] Separate Alarm Relay Contacts For Room High Temperature And Low Temperature. 16] Display Of All The A/C Parameters Continuously On Display. 17] Various Set Points Are Settable Through Function Mode Categories. 18] It Has Password Protection. 19] Delay Time Option, 20] Auto / Manual Facility For All Ac%U2019s. 21] 12 Months Warranty. Technical Specifications: - 1] Supply Voltage:-415 Volt, 3 Phase Incoming I.E. 230 V Ac, 50 Hz %B1 15% Separate For Each A/C. 2] Contact Rating: 30 A At 230 V Ac For Compressor Or Ac .Outputs 3] 5 A At 250 V Ac For Alarm Potential Free Outputs (C, N/O). 4] Temperature Sensor: Thermistor Sensor Ntc 10K@25%B0c 5] Size: 235 Mm (H) X 190 Mm (W) X 63 Mm (D) 6] Metal Body With Wall Mounting. 7] Sensor Cable Length: 1.5 Meters. Make : Dynamic Micro Tech /Logic Technology /Aditya /T-Mech Or Similar. Rate Ref. Qtn No El/W/Gs/ 234/01/20-21 Dated 30-7-2020

Refer document

Refer document

Refer document