Execution , Testing And Commissioning Of Balance Work For Sarthebari Town Water Supply Scheme Repairing Of Distribution Pipe Network , Road Crossing , Repairing Of Raw Water Channel , Construction Of Valve Chamber Of Sarthebari Water Supply Scheme . , Sarthabari, Guwahati-Assam

TDR : 26508705

Tender Notice
BOQ

Expired

Sarthabari, Guwahati , Assam

Tender Brief : Execution , Testing And Commissioning Of Balance Work For Sarthebari Town Water Supply Scheme Repairing Of Distribution Pipe Network , Road Crossing , Repairing Of Raw Water Channel , Construction Of Valve Chamber Of Sarthebari Water Supply Scheme .

Document Fees
₹ 1000 /-

EMD
₹ 48097.0 /-

Tender Value
₹ 24.04 Lakhs /-

Submission Date
20-01-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work : Execution , Testing and Commissioning of balance work for Sarthabari Town Water Supply Scheme.
1	1	A. Repairing of distribution pipe network including replacement, damage, broken pipes, etc. including all supply of materials as required
2	2	Earth work in excavation in black toping road surface (average thickness of black toping 35mm) including the removal of road metal, boulders and refilling the same properly and restore the road surface to its original condition (except black toping as the black toping to be done by the PWD on necessary payment all complete as directed . For 100 mm dia pipe to 160 mm dia PVC pipe	459	M2
3	3	Earth work in excavation for metallic road surface (average thickness of 40 cm) including the removal of road metal, boulders and including restoration of road surface original condition all complete as directed Fpr 90 mm dia to 160 mm dia PVC pipe	670	M2
4	4	Earth in excavation in foundation trenches including refilling the quantity as necessary after completion of works of pipe line dressing, ramming, watering etc. and removal of surplus earth with 50 M lead and lift up to 1.5 M all complete as directed including boiling out water where necessary.( B ) b) Bastic land, tillah soil, hard soil, mixed with moram gravel and boulder up to one man size. ( fro 90 mm dia to 1160 mm dia PVC pipe \nb) Bastic land, tillah soil, hard soil, mixed with moram gravel and boulder up to one man size.\n	715	cum
5	5	Labour charge for carrying and laying in position in tranches PVC pipes with specials in lines and level including cutting the pipes where necessary and providing joints to pipes and specials with jointing materials such as cement libricant after roughening the surfaces including the cost of jointing materials and testing the joints all complete as directed.
6	6	90 mm dia. pipe	500	RM
7	7	110 mm dia. pipe	500	RM
8	8	160 mm dia. pipe	200	RM
9	9	Labour charge for carrying and providing C.I.D. joints to A.C. prssure pipe and C.I. plain ended spacials all complete as directed (excluding supplying of the C.I.D. joints)
10	10	90 mm dia. pipe	8	Each
11	11	100 mm dia. pipe	6	Each
12	12	150 mm dia. pipe	4	Each
13	13	Labour charge for carrying, placing in position, fitting and fixing C.I. sluice valve (with wheel & cap) C.I. refluxe valve complete with supplying bolts and nuts, 3 mm thick rubber insertion sheet etc (the tail pieces if required will be paid separately) all complete as directed (one valve and two flanged joints
14	14	90 mm dia. pipe	1	Each
15	15	110 mm dia. pipe	1	Each
16	16	160 mm dia. pipe	1	Each
17	17	Construction of brick masonry valve Chamber in cement mortar 1:5 ( 1 cement: 5 coarse sand ), 100 mm thick RCC top slab with 1:2:4 mix (1 cement :2 coarse sand: 4 grade stone aggregate20 mm nominal size) with 10 mm dia tor steel @ 130c/c both ways (double jali), 100 mm thick foundation concrete 1:3:6 mix (1 cement :3 coarse sand: 4 grade stone aggregate40 mm nominal size) concrete, inside plastering 12mm thick with cement mortar 1:4 (1 cement: 4 course sand) finished with floating coat neat cement complete as per standard design and drawing as directed by the Engineers-In-Charge .a) Size -1200x1200x1200	2	Each
18	18	Supply of UPVC. Pipes of class IV( 10 kg/cm2 threaded plumbing & casing PVC pipes (Blue/Off White colures).
19	19	90 mm dia. pipe	500	RM
20	20	110 mm dia. pipe	500	RM
21	21	160 mm dia. pipe	200	RM
22	22	Supply of cast Iron Detachable (CID) Joints (Class-15) conforming IS 8794-1988
23	23	80 mm dia. pipe	8	Each
24	24	100 mm dia. pipe	6	Each
25	25	150 mm dia. pipe	4	Each
26	26	Supply of Rubber Ring for CID as per BIS specification and its up to date ammendment as applicable for AC (Class-15) pressure pipes.
27	27	80 mm dia. pipe	16	Each
28	28	100 mm dia. pipe	12	Each
29	29	150 mm dia. pipe	8	Each
30	30	Supply of PVC specials tee, bend, reducer etc all complete as directed.
31	31	90° Bend for 90 mm dia pipe.	4	Each
32	32	90° Bend for 110 mm dia. pipe	4	Each
33	33	90° Bend for 160 mm dia. pipe	2	Each
34	34	45° Bend for 90 mm dia. pipe	6	Each
35	35	45° Bend for 110 mm dia. Pipe	6	Each
36	36	45° Bend for 160 mm dia. pipe	4	Each
37	37	PVC Collar (Socket) for 90 mm dia. pipe	10	Each
38	38	PVC Collar (Socket) for 110 mm dia. pipe	10	Each
39	39	PVC Collar (Socket) for 160 mm dia. pipe	6	Each
40	40	PVC Tail piece for 90 mm dia. pipe	6	Each
41	41	PVC Tail piece for 110 mm dia. pipe	6	Each
42	42	PVC Tail piece for 160 mm dia. pipe	4	Each
43	43	PVC Flange for 90 mm dia. pipe	3	Each
44	44	PVC Flange for 110 mm dia. pipe	3	Each
45	45	PVC Reducer for 160 X 110	5	Each
46	46	PVC Reducer for 90 X 110	5	Each
47	47	PVC End Cap for 90 mm dia. pipe	6	Each
48	48	PVC End Cap for 110 mm dia. pipe	6	Each
49	49	PVC End Cap for 160 mm dia. pipe	4	Each
50	50	Supplying and delivery of Cast Iron Double Flanged (CIDF) sluice valve with hand wheel (Class PN-1.0) conforming to Conforming to IS:14846/2000 with up to date amendments of any reputed make to the distribution pipe lines including supply, fitting, fixing of insertion sheets (gaskets), nuts and bolts with washers, etc. and including all taxes and duties, all complete as directed and specified of following diameter.
51	51	80 mm dia	1	Each
52	52	100 mm dia. pipe	1	Each
53	53	150 mm dia. pipe	1	Each
54	54	Supply of Full Nut & Bolts for fitting fixing of sluice valve, air valve and specials etc.	70	Kg
55	55	Supply of rubber gasket for fitting fixing of sluice valve, air valve and specials etc.(i) 4mm thick	40	Kg
56	56	Solvant cement (i) 1000 ml container	3	Ml
57	57	B. Supplying, installation, testing and commissioning of Submersible Raw water and Clear water pumping sets
58	58	Supply, installation, testing and commissioning of electrical driven Submersible Raw water pumping set (couple type) suitable for operation with 415 (+10 %) V, 3-phase, 50 Hz + 3% power supply with panel board including Star Delta starter (AC incorporating incomer MCCB, three air break contactors for main/delta/star as required) etc. with suitable size/capacity & following specification of pump/ motor along with all accessories such as bends, non return valves, sluice valve, clamps with nuts & bolts, clips etc. in all respect (excluding rising delivery pipes and specials fitting, fixing & testing etc.).Discharge 15.30 LPS, Head 45 M	1	Each
59	59	Supplying and fixing required size of copper cable ( branded ) for power line from pane board to starter and starter to motors as per specifications of the above mentioned pumping sets.(i) 4 Sq.mm 3 core.	150	RM
60	60	Supplying, placing, laying, fitting and fixing of suction / delivery of G.I pipes (TATA, Medium) along with its accessories/specials etc. as per requirement in the field for the above mentioned pumping set as per specifications --.100 mm diameter	1200	RM
61	61	Supplying, installation, testing and commissioning of 1 no. 15 HP electrical driven centrifugal clear water pumping sets along with induction type motor suitable for operation with 415v + 10% 3 – phase, 50 Hz + 3% power supply.	15	HP
62	62	Supply and laying of following size PVC cable as specified and directed. (a) 4.00 Sqmm 3core cable .	120	RM
63	63	C. Carrying, laying ,testing and commissoining of distribution pipe network using 150 and 200 mm dia MS pipe to cross two numbers of culvert.
64	64	Earth work in excavation in foundation trenches includng refilling the quantity as ncessary after completion of work of pipe line dressing, ramming, watering, etc and removal of surplus earth with 50 m lead and lift up to 1.5 m all complete includng including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering, ramming, etc. and removal of surplus excavated earth with all lead and lifts as directed and specified in following classification of soils including bailing out water where necessary as directed and specified.'B) Basti land, tilah sol, hard sol, soil mixed with moram gravel and boulders upto one man size a) In hard soil (i) For 150 mm to 200 mmdia pipe.	3.1	CUM
65	65	Labour cgarge for carrying laying in position CI S&S pipe ( Class-LA) in level complete as dirrected
66	66	i)150 mm dia	8	Rm
67	67	ii) 200 mm dia	10	Rm
68	68	Labour cgarge foe carrying and providing CID joints to AC pipe and CI plain ended specilas all complete as directed ( excluding supply of CID joints)in position CI S&S pipe ( Class-LA) in level complete as dirrected
69	69	i)150 mm dia	2	Each
70	70	ii) 200 mm dia	2	Each
71	71	Welding of MS pipe throgh electrick arc welding using specials welding rod in the V shaped 3 layers joints for jointing of MS pipe and not to be leakage of water . The roughness of joints should be properly grinding with electric grinder machine and priming the jpints.
72	72	i) 150 mm dia MS pipe	14	Each
73	73	ii) 200 mm dia MS pipe	14	Each
74	74	Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.a). With ready mixed \"red-lead/ red oxide\" primer.
75	75	i) 150 mm dia MS pipe	4.17	Sqm
76	76	ii)200 mm dia MS pipe	6.79	Sqm
77	77	Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).
78	78	i) 150 mm dia MS pipe	4.17	Sqm
79	79	ii)200 mm dia MS pipe	6.79	Sqm
80	80	Supply of Electrically welded Mild Steel ( MS ) pipe having 8 mm thickness for using carrying drinking water alongwith distribution pipe network as per IS 3589:1981 i) 150 mm dia and 200 mm dia	489.43	Kg
81	81	Cast Iron Detachable joints for asbestos cement pressure pipes ( Class-15) with uptodate amendment as applicable for following dia
82	82	i) 150 mm dia	2	Set
83	83	ii) 200 mm dia	2	Set
84	84	Rubber Ring for CID as per BIS specification and it's up to date amendment as applicable for AC (Class-15) Pressure Pipes.
85	85	i) 150 mm dia	2	Each
86	86	ii) 200 mm dia	2	Each
87	87	D. Construction of Box Culvert at approach Road
88	88	Earth work in excavation for base slab, foundation trenches of walls, footing of columns, etc. and the like, including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering, ramming, etc. and removal of surplus excavated earth with all lead and lifts as directed and specified in following classification of soils including bailing out water where necessary as directed and specified.i) Upto a depth of 2.0 m below the existing ground level a) In hard soil.	11.7	CUM
89	89	Providing brick soling and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing as directed including all labour and material and if necessary dewatering complete (a) Brick on flat soling	18	Sqm
90	90	Plain cement concrete works with coarse aggregate of size 32 mm down in foundation bed for footings, walls, base slab etc. and the like as directed and specified including curing complete (shuttering where necessary shall be measured and paid separately)	3.3	Sqm
91	91	Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the same for inset reinf (i) Foundation, footing, base of columns, pile cap, raft, and mass concrete works etc.(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face(ii) Using38mm thick plank	5.87	Sqm
92	92	Foundation, footing, base of columns, pile cap, raft, and mass concrete works etc.
93	93	i)Vertical surface such as walls (any thickness), parapet walls, partitions, walls of septic tank, inspection pit and the like including attached pilasters, butresses, plinth and string courses and the like.(i) Using 38mm thick plank	32	Sqm
94	94	ii) Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.(i) Using 38mm thick plank	10.5	Sqm
95	95	Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) b) M20 grade concrete or Prop. 1:1.5:3(A) In substructure up to plinth level
96	96	Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.b) M20 grade concrete or Prop. 1:1.5:3	4.13	CUM
97	97	i) Walls (thickness not less than 100mm) including attached pillasters, buttresses, plinth and string course etc. b) M20 grade concrete or Prop. 1:1.5:3	5.25	CUM
98	98	ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.	2.5	CUM
99	99	Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) (i) TMT Corrosion resistant steel (CRS) reiforcement bar	8.67	Qtl.
100	100	E. Repairing of Raw Water Channel
101	101	Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels(i) Raw Water Channel	5.4	CUM
102	102	Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the same for inset reinforcement.
103	103	Vertical surface such as walls (any thickness), parapet walls, partitions, walls of septic tank, inspection pit and the like including attached pilasters, butresses, plinth and string courses and the like.(i) Using 38mm thick plank (i) Wall	54	Sqm
104	104	Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.(i) Using 38mm thick plank (a) Slab	20	Sqm
105	105	Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (B) In super structure from plinth level up to 1st floor level. b) M25grade concrete
106	106	i) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including	3	CUM
107	107	ii) Walls (thickness not less than 100mm) including attached pillasters, buttresses, plinth and string course etc. preparing the top surface and finishing of nosing.P)Without using admixture, plasticiser etc c) M25 grade concrete	3.75	Cum
108	108	Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) (i) TMT Corrosion resistant steel (CRS) reiforcement bar	6.93	Qntl
109	109	15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. B) On fair sidev	50	Sqm
110	110	Removing white or colour wash by steel wire brushing and/ or scraping, sand papering and preparing the wall surface smooth including necessary repairs to scratches complete.	78.5	Sqm
111	111	Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.	128.5	Sqm
112	112	F. Replacement of Spindles and wheels of CI Sluice valves of Filter house.
113	113	Supplying and delivery of ISI Marked Long Spindle Cast Iron Double Flanged (CIDF) sluice valve with hand wheel (Class PN-1.6) conforming to Conforming to IS:14846/2000 with up to date amendments of any reputed make to the distribution pipe lines including supply, fitting, fixing of insertion sheets (gaskets), nuts and bolts with washers, etc. and including all taxes and duties, all complete as directed and specified following sizes.
114	114	i) 150 mm dia	3	Each
115	115	ii) 200 mm dia	3	Each
116	116	G. Reparining and painting of Treatment plant components
117	117	Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. (i) Openable Window	20.46	Sqm
118	118	Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (b) With 1st class timber (Bonsum/ Sundi)	0.22	Sqm
119	119	Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core.(ii) 35 mm thick .	7.13	Sqm
120	120	Removing white or colour wash by steel wire brushing and/ or scraping, sand papering and preparing the wall surface smooth including necessary repairs to scratches complete.	1018.53	Sqm
121	121	Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.	1018.53	Sqm
122	122	Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials.	472.24	Sqm
123	123	Distempering (one coat) with oil bound distemper of approved brand and manufacture and of required shade on old wall surface to give an even shade, after throughly brooming the surface free from dirt, loose scales and other foreign matter and also including preparing the surface even and sand papered smooth.	772.95	Sqm
124	124	Extra over item no above for every subsequent coat of distempering with oil bound distemper of approved brand and manufacture.	772.95	Sqm
125	125	Providing, fitting and fixing steel windows/ ventilators (openable) of standard rolled steel sections as per relevant I.S. Code-1038 joints mitred and welded with 15mmx3mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device and steel handles, peg stays of 300mm long etc. complete as per drawing including applying a priming coat of red-lead paint.	44.68	Sqm
126	126	Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.(i).Surfaces over 100mm in width or girth.b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).	44.68	M2
127	127	Painting one coat (excluding priming coat) on previously painted steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.(i).Surfaces over 100mm in width or girth.b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).	12.28	SQm
128	128	Labour charge for cleaning /washing chemical house/ pump house for dust ,brush wood,saplings and trees and disposal of the same out side perphery and lift 50 mtrs.	25	Day
129	129	Materials like bambo brooms, iron brush for cleaning brushing , washing powder etc as reqiured	1	Job
130	130	I.Trial run of the scheme for two month after agmentation and renovation of the scheme including repairing of distribution network pipe line, unit of treatment plantetc.	1	Job
131	131	J.Supply of chemicals with up to date amendment and suitable for purifying drinking water.
132	132	Ferric Alum	1	MT
133	133	Hydrate Lime	1	MT
134	134	Bleaching powder	1	MT

Also Visit

Tenders

Assam Tenders

Distribution and Conditioning Tenders

Valves Tenders

Valve Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Execution , Testing And Commissioning Of Balance Work For Sarthebari Town Water Supply Scheme Repairing Of Distribution Pipe Network , Road Crossing , Repairing Of Raw Water Channel , Construction Of Valve Chamber Of Sarthebari Water Supply Scheme . , Sarthabari, Guwahati-Assam

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Execution , Testing And Commissioning Of Balance Work For Sarthebari Town Water Supply Scheme Repairing Of Distribution Pipe Network , Road Crossing , Repairing Of Raw Water Channel , Construction Of Valve Chamber Of Sarthebari Water Supply Scheme . , Sarthabari, Guwahati-Assam

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us