Renewal And Construction Work Of Office Of The Executive Engineer Construction Division Building , Pwd , Meerut .
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Jan 2021
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
854
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
EE,CD(B), PWD MEERUT → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renewal And Construction Work Of Office Of The Executive Engineer Construction Division Building , Pwd , Meerut .
BOQ
| Name of Work: Renewal & Construction Work of Office of the Executive Engineer Construction Division (Building), PWD, Meerut. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. As per S.I. No. 281 | BI01010001010000000000000515BI0100001113 | 8 | Cum |
| 2 | 2 | Marking drip coarse in sun shades or facia with 1:3 cement and fine sand mortar as per direction of Engineer-in-charge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. As per S.I. No. 600 | BI01010001010000000000000515BI0100001114 | 18 | Rm. |
| 3 | 3 | M-150 Brickwork in 1:6 (one cement and 6 sand of 1.25 F.M) mortar in foundation and plinth including supply of materials, labour, tools and plants etc. required for proper completion of the work but in superstructure including necessary cutting and moulding of bricks as required thickness of walls of one brick thick. SI No. 303+309+310 | BI01010001010000000000000515BI0100001115 | 18 | Cum |
| 4 | 4 | Same as above item no. 3 but for walls of half brick thick. SI No. 303+309+310(a) | BI01010001010000000000000515BI0100001116 | 3 | Cum |
| 5 | 5 | R.C.C. work with cement, approved coarse sand and 2 cm guage approved stone grit in proportion of 1:1.5:3 in lintals of door and windows,footings,plinth beam,slab etc.excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGGI binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper completion of the work including cost of binding wire.as per item no 284(a) | BI01010001010000000000000515BI0100001117 | 7 | Cum |
| 6 | 6 | R.C.C. in 1:1½:3 (Column and T-Beam) as per item no 289 | BI01010001010000000000000515BI0100001118 | 6 | Cum |
| 7 | 7 | M.S. (tor steel or plain) in plain work such as R.C.C or R.B work including bending for proper shape and including supply of steel and its wastage, bend, hooks and authorised over lapping shall be measured and including cost of binding wire. SI No 504 | BI01010001010000000000000515BI0100001119 | 9.5 | Qtl. |
| 8 | 8 | Supply and fixing 6 mm. (¼\") China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and plants.complete. As per Sl No. 628 | BI01010001010000000000000515BI0100001120 | 40 | Sqm |
| 9 | 9 | Supply and fixing of 6 to 8 mm thick evory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand mortar finished with in its cement colour slurry, jointing and polished of approved quality complete including supply of all materials, labour, T&P etc. required for proper completion of work as per direction of engineer in charge. Ch. 14-NI-4 | BI01010001010000000000000515BI0100001121 | 35 | Sqm |
| 10 | 10 | 12 mm thick plaster with cement & fine sand of 1.25 F.M. in 1:6 over brick work minimum thickness not to be less than 1 cm. including supply of all materials, labour, T&P etc. required for proper comletion of work. SI no. 586 . | BI01010001010000000000000515BI0100001122 | 125 | Sqm |
| 11 | 11 | Same as item no. 10 but with cement & approved fine sand mortar in 1:3 Plaster on ceiling. SI no. 582a+587 | BI01010001010000000000000515BI0100001123 | 50 | Sqm |
| 12 | 12 | Same as item no. 11 but platering work over rough face of one brick wall.SI no. 586+596. | BI01010001010000000000000515BI0100001124 | 60 | Sqm |
| 13 | 13 | Providing wall putty on new surface with approved quality material of Berger/J.K./ Birla or similar make 2 coats. Chapter 15 N.I. no. 662.4 | BI01010001010000000000000515BI0100001125 | 300 | Sqm |
| 14 | 14 | Finishing wall with premium acrylic smooth exterior paint with silicon additives of required shade. New work(2 or more coats applied @1.43 litre/10sqm over & including priming coatof exterior primer applied @ 2.2 kg/10sqm). As per SOR Sl.No.662.1 | BI01010001010000000000000515BI0100001126 | 100 | Sqm |
| 15 | 15 | Wall painting with premium acrylic emulsion having VOC(voletile organic compound) content less than 50 gms/litre,of approved brand & manufacture including applying two or more coats to achieve even shade & colour. As per SOR Sl.No.660+661 | BI01010001010000000000000515BI0100001127 | 180 | Sqm |
| 16 | 16 | Providing cement primer on old/new surface SI No ch-15. NI No-662.3 | BI01010001010000000000000515BI0100001128 | 300 | Sqm |
| 17 | 17 | Providing & laying \"brick coba\" 12mm thick laid with M-150 class brick bat coba 7.5 cm thick with gap of 15 mm to each other,over 20 mm thick base of cement mortar 1:4 cement & coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba motors mixed with water proofing compound in 1:4 cement & coarse sand mortar finished smooth&top mashed false square 30 cm 30cm & side wall parapet shall be mono lythic plaster wall upto 30 cm higher & junction & cornor shall be rounded by brick ballast cement & coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including supply of all material, T&P etc. complete for proper completion of work. ch-11 N.I | 45 | Sqm | |
| 18 | 18 | Supply and fixing of 10cm (4\") internal dia PVC down pipes Kisan or Supreme make complete with bends with door at top & plane at bottem & grantings & including supply of necessary M.S clamp 2.5 cm x3.00 mm (1\"x1/8\")fixed to walls with cement mortar (1:2)& including supply of 15 cm (6\") long 6mm.(1/4\") dia nail all materials, labour and T&P etc. required for proper completion of the work & also including repair of plaster pointing etc. if damaged during fixing of the pipes. SI No- 730(a) | 40 | Rm. | |
| 19 | 19 | M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work.s. As per SOR No. 502A | 150 | Kg | |
| 20 | 20 | Suppling & laying of 80mm thick Precast cement concerete I shaped /zigzag (all shapes) interloking paver blocks with top layer of minimum 8 mm thickness having plan dimension 200x(160+120mm) of O.P cement,smooth high gloss finish, skid resistant, manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concerete paver block shall not be less than 30MPa (M-30) and weight 5 kg. per No. Confirming to IS:15658-2006 including cost of all material labour T&P & VAT etc required for proper complection of the work as directed by Engineer in charge. Ch.-20 New item no.14 | 50 | No | |
| 21 | 21 | Providing and fixing water closet squatting pan (Indian type W.C. pan size 580x440mm) Hindware or Equivalent with 100mm sand cast Iron P or Strap, 10\nlitre low level white P. V.C. flushing cistern with manually controlled device (handle lever) confirming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: | 1 | No. | |
| 22 | 22 | Providing and fixing white vitreous China flat black or wall corner type lipped front, large urinal basin 430x260x350 mm size ISI marked Hindware or Equivalent respectively with 5 litre white P.V.C. automatic flushing cistern with standard flush pipe and C.P. brass spreader with fittings. 25 mm C.P. brass flush valve for urinal stand with 15mm size control cock and 300 mm long standard size heavy quality C.P. brass flush pipe with nuts, clamps and flanges etc., including painting of fitting and brackets, including cutting and making good the wall and floors wherever required complete in all respects.As per Ch.No-21b.2 | 2 | No. | |
| 23 | 23 | Providing & fixing White Vitreous China wash basin ISI marked Hindware or Equivalentwith 32 mm C.P. brass waste of standard pattern, 32 mm C.P. brass one piece casted bottle trap with extension pipe to wall with wall flange including painting of fittings and brackets, including cutting and making good the walls wherever required.As per Ch.No-21b.9b+10c Flat back wash basin of size 550x400 mm | 1 | No. | |
| 24 | 24 | Providing and fixing 600x450 mm x 5.5 mm thick mirror of superior glass (of approved quality Atul or equivalent) complete with 6 mm thick hard board ground and 12.5 x 5 mm beading of hard board painted black and fixed to wooden cleats with C.P. brass screws and washers.As per Ch.No-21b.11 | 2 | No. | |
| 25 | 25 | Providing and fixing chlorinated Poly Venyl Chlorider (CPVC) pipes complete with CPVC fittings such as elbows, tees, crosses, couplings, unions, pass over pipes, plugs, caps, reducing fitting, male and female brass metal insert (transition) fittings etc. including clamps, supports, hangers, dash fasteners, making connection between CPVC pipes and fittings with CPVC solvent cement and metal to metal joints with use of Teflon tape of proper grade, including cutting chases and holes in walls, slabs and floors and making good the same and finishing the same to make it leak proof, complete the same to make it leak proof, complete in all respects and as directed by the Engineer incharge (For concealed works). 20 mm nominal outer dia pipes.As per D.S.R. No.18.8.2 | 70 | RM | |
| 26 | 26 | Providing and fixing chlorinated Poly Venyl Chlorider (CPVC) pipes complete with CPVC fittings such as elbows, tees, crosses, couplings, unions, pass over pipes, plugs, caps, reducing fitting, male and female brass metal insert (transition) fittings etc. including clamps, supports, hangers, dash fasteners, making connection between CPVC pipes and fittings with CPVC solvent cement and metal to metal joints with use of Teflon tape of proper grade, including cutting chases and holes in walls, slabs and floors and making good the same and finishing the same to make it leak proof, complete the same to make it leak proof, complete in all respects and as directed by the Engineer incharge (For concealed works). 25 mm nominal outer dia pipes.As per D.S.R. No.18.8.3 | 20 | Rm. | |
| 27 | 27 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). 25mm nominal outer dia pipes.As per D.S.R. No.18.17.1 | 1 | No's | |
| 28 | 28 | Providing and fixing C.P. Brass Bib Cock of approved quality confirming to IS:8931.As per Ch.No-21b.18 15mm nominal Bore | 3 | No's | |
| 29 | 29 | Providing and fixing C.P. Brass long body Bib Cock/ pilor of approved quality confirming to ISI standard and weighing not less than 690 gms.As per Ch.No-21b.20 15mm nominal Bore | 2 | No's | |
| 30 | 30 | Providing and fixing C.P. Brass stop cock ( concealed of standard design) of approved quality confirming to IS:8931.As per Ch.No-21b.22 15mm nominal Bore | 3 | No's | |
| 31 | 31 | Providing and fixing C.P. Brass angle valve with C.P. brass flange of approved quality confirming to IS:8931.As per Ch.No-21b.22 15mm nominal Bore | 7 | No's | |
| 32 | 32 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked(Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in-charge. | 500 | Per ltr. |
AI Tender Summary
Tender Timeline
Jan 05, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 12, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 13, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender