Installation Of Ils ( Llz And Gp ) At Jabalpur Airport ( Civil Works ) Upgradation Of Jabalpur Airport To Make It Suitable For Operation Of Ab320 Type Of Aircraft . Sh . Installation Of Ils ( Llz And Gp ) At Jabalpur Airport ( Civil Works )
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Jan 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur Airport → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation Of Ils ( Llz And Gp ) At Jabalpur Airport ( Civil Works ) Upgradation Of Jabalpur Airport To Make It Suitable For Operation Of Ab320 Type Of Aircraft . Sh . Installation Of Ils ( Llz And Gp ) At Jabalpur Airport ( Civil Works )
BOQ
| Name of Work : Up-gradation of Jabalpur Airport to make it suitable for operation of AB-320 type of aircraft. SH. : Installation of ILS (LLZ and GP) at Jabalpur Airport (Civil Works). | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.\nAll kinds of soil | 2655.26 | cum | |
| 2 | 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.\nAll kinds of soil. | 6.37 | cum | |
| 3 | 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 660 | cum | |
| 4 | 4 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.\nAll kinds of soil | 660 | cum | |
| 5 | 5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | 1.04 | cum | |
| 6 | 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\n1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) | 2.7 | cum | |
| 7 | 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\n1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | 766.3 | cum | |
| 8 | 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :\n1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) | 220.74 | cum | |
| 9 | 9 | Centering and shuttering including strutting, propping etc. and removal of form for :\nFoundations, footings, bases of columns, etc. for mass concrete | 259.97 | sqm | |
| 10 | 10 | Centering and shuttering including strutting, propping etc. and removal of form for : \nSuspended floors, roofs, landings, balconies and access platform | 34.4 | sqm | |
| 11 | 11 | Centering and shuttering including strutting, propping etc. and removal of form for : \nLintels, beams, plinth beams, girders, bressumers and cantilevers | 464.1 | sqm | |
| 12 | 12 | Centering and shuttering including strutting, propping etc. and removal of form for : \nColumns, Pillars, Piers, Abutments, Posts and Struts | 309.4 | sqm | |
| 13 | 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.\nThermo-Mechanically Treated bars of grade Fe-500D or more. | 24281.4 | Kg | |
| 14 | 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:\nCement mortar 1:6 (1 cement : 6 coarse sand) | 1.49 | cum | |
| 15 | 15 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 300 | kg | |
| 16 | 16 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | 400 | kg | |
| 17 | 17 | 12 mm cement plaster of mix :\n1:6 (1 cement: 6 fine sand) | 6.48 | sqm | |
| 18 | 18 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. | 6080 | sqm | |
| 19 | 19 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. | 256 | cum | |
| 20 | 20 | Providing and fixing in position pre-moulded joint filler in expansion joints. | 1760 | per cm depth per cm width per metre length | |
| 21 | 21 | Providing and laying in position bitumen hot sealing compound for expansion joints etc. \nUsing grade ‘A’ sealing compound. | 1280 | per cm depth per cm width per metre length | |
| 22 | 22 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | 5550 | sqm | |
| 23 | 23 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :\nW.C. pan with ISI marked white solid plastic seat and lid | 2 | each | |
| 24 | 24 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:\nWhite Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | 2 | each | |
| 25 | 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.\n20 mm nominal outer dia Pipes | 20 | metre | |
| 26 | 26 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.\n25 mm nominal outer dia Pipes | 20 | metre | |
| 27 | 27 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.\n80 mm dia nominal bore | 100 | metre | |
| 28 | 28 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 2000 | per litre | |
| 29 | 29 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931\n15mm nominal bore | 4 | each | |
| 30 | 30 | Manufacture,Supply ,Trasportation,Erection & placing frangible huts having dimension of 7m X 3.5m X 3m at provided base as directed by Engineer-In-charge.The doors, windows and ventilation system shall be as per industry standards and complete as per approved design /drawing in approved color and shade with all requisite fixtures, nuts, bolts, etc. complete job, excluding the cost of foundation but including fixing the frangible hut at provided foundation. The walls provided in the frangible hut should be 40mm thick and insulated in nature. Double slant 40mm thick roof will be provided including an additional secondary roof of GRP material over hut. Item includes complete painting of hut internally as well as externally as directed by E-I-C. The structural stability shall be the sole responsibility of manufacturer and quoted rate will be inclusive of vetted design calculation and certificate for frangibility from any Govt. Engg. College/NITs/IITs .Item also includes provision of frangible toilet of size 1.8m X 1.2m. Quoted rate will be inclusive of all necessary installation and trasportation to the site. | 2 | Each | |
| 31 | 31 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work.150 mm dia nominal bore with 3mm thickness. | 150 | metre | |
| 32 | 32 | Providing and placing 5mm thick Anti-Static matt of approved brand and standard specification complete as per the direction of Engineer-in-Charge. | 49 | Sqm | |
| 33 | 33 | Providing and Laying HDPE pipe having nominal diameter of 110 mm, pressure rating of PN6 and confirming to material grae of PE100 type. Wall Thickness of pipe ranges between 5.3mm - 6mm. Laying of pipe confirming to relevant IS specifications, complete at site as per the direction of Engineer-in-charge. | 150 | Meter | |
| 34 | 34 | Providing and Laying HDPE pipe having nominal diameter of 160 mm, pressure rating of PN6 and confirming to material grae of PE100 type. Wall Thickness of pipe ranges between 7.7mm - 8.6mm. Laying of pipe confirming to relevant IS specifications, complete at site as per the direction of Engineer-in-charge. | 80 | Meter | |
| 35 | 35 | Providing & Fixing of Hand Shower (Health Faucet) of Jaquar make model ALD-CHR-573 complete at site as per the direction of Engineer-in-charge. | 2 | Each | |
| 36 | 36 | Preparing & providing Structural Design and Drawings of Structural Elements (as per relevant IS codes) like Columns, Beams, Slab and any other elements for the proposed Construction of localizer antenna platform at operational area of airport as per Layouts/Plans/Drawings provided by AAI after investigating the existing location. The contractor shall submit 3 sets of structural design and drawings to the Engineer-in-Charge for vetting from any government engineering college . The fee / charges for vetting shall be paid by the contractor. In case any clarification / modification in design/drawing is required during vetting or during the course of execution of work, it shall be got done by the contractor through the consultant for which nothing extra shall be paid.\nAfter vetting/approval of structural design & drawing, 3 (three) sets of good for construction drawings showing all relevant details duly signed by the consultant shall be submitted to the Engineer-in-Charge.\nRate quoted by contractor shall be for complete job including structural design, drawings, vetting charges, site visits by consultant, modifications, submission of required nos. of copies of reports. Nothing extra shall be payable over and above the quoted rate. | 1 | Each |
AI Tender Summary
Tender Timeline
Jan 05, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 18, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 19, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender