Construction Of Office Building For Sub Division Office Mehal Kalan At Barnala At Water Works Site Amla Singh Wala District Barnala In Punjab Construction Of Building , Internal Roads , Parking , Foot Paths , Providing Public Health Services And All O, Water Works Site Amla Singh Wala-Punjab

TDR : 26485690

Tender Notice
BOQ

Expired

Water Works Site Amla Singh Wala , Punjab

Tender Brief : Construction Of Office Building For Sub Division Office Mehal Kalan At Barnala At Water Works Site Amla Singh Wala District Barnala In Punjab Construction Of Building , Internal Roads , Parking , Foot Paths , Providing Public Health Services And All O

Document Fees
₹ 1 /-

EMD
₹ 79500.0 /-

Tender Value
₹ 39.81 Lakhs /-

Submission Date
21-01-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: CONSTRUCTION OF OFFICE BUILDING FOR SUB DIVISION OFFICE MEHAL KALAN (AT WATER WORKS SITE AMLA SINGH WALA ) DISTRICT BARNALA IN PUNJABConstruction of Building, Internal Roads, Parking, Foot Paths, Providing Public Health Services i.e. Internal Water Supply, Estate Water Supply, Estate Sewerage , Providing and Installing Fire Fighting Equipments, Electrical Services, i.e Internal Installation, etc complete in all respects & all other works contingent there to as per approved BID Document.
1	1	CONSTRUCTION OF BUILDING AND PlINTH PROTECTION
2	2	Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm layers with compaction including disposal of all surplus soil as directed within a lead of 30 meters.	Iteam1	154.56	cum
3	3	Cement concrete 1:5:10\n with stone aggregate 40 mm gauge \nmixing by mechanical means using concrete mixing volumetric type	Iteam2	20.57	cum
4	4	Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.	Iteam3	5.39	cum
5	5	Reinforced cement concrete M-20 mechanicaly batch mixed using batch type concrete mxier as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in super structure.	Iteam4	35.75	cum
6	6	Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)	Iteam5	40.31	sqm
7	7	Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.	Iteam6	191.52	sqm
8	8	Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels	Iteam7	110.16	sqm
9	9	First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.	Iteam8	107.56	cum
10	10	First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.	Iteam9	71.32	cum
11	11	Extra rate for First Floor	Iteam10	14.35	cum
12	12	115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1 :4 cement sand mortar in super structure	Iteam11	18.99	sqm
13	13	12.50 mm Cement Plaster 1:5 on walls	Iteam12	175.16	sqm
14	14	20 mm thick Cement Plaster 1:5 in two coats work.	Iteam13	175.16	sqm
15	15	12.5 mm thick cement plaster 1:4	Iteam14	237.08	sqm
16	16	20 mm thick Cement Plaster 1:4 in two coat work.	Iteam15	237.08	sqm
17	17	Bearing Plaster of 10 mm thick cement mortar 1:3 cement sand finished with a floating coat of neat cement and thick coat of Lime wash / P.O.P. on top of walls when dry for bearing of R.C.C. slabs & beams.	Iteam16	23.31	sqm
18	18	Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 2.5 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item)	Iteam17	22.86	Rmt
19	19	Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.\nU.P.V.C 110 mm dia. Bend	Iteam18	6	No.
20	20	Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.\nU.P.V.C 110 mm bend	Iteam19	13	No.
21	21	Providing and fixing in position M.S. or heavy flat iron clamps made out of M.S. flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyphonage pipes to walls complete in all respects. Including cutting and making good the walls and floor etc. and painting.\nM.S. Holder Bats clamps 100 mm i/d H.C.I. pipes	Iteam20	13	No.
22	22	Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.	Iteam21	6	No.
23	23	Providing and fixing in position gratings 150 mm x 150 mm on top Khura PVC grating.	Iteam22	6	No.
24	24	Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3	Iteam23	6	No.
25	25	Terracing consisting of tiles 22.86 x 11.43 x 3.83 cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of CC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.	Iteam24	179.03	sqm
26	26	Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.	Iteam25	62.48	Rmt
27	27	Earth filling with good quality earth obtained from outside the plinth including compensation of earth, loading, unloading, carriage from outside the premises to site of work, spreading, laying watering compacting with rammer complete as per specifications.	Iteam26	233.74	cum
28	28	Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar up to 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead up to 30 metres	Iteam27	61.82	cum
29	29	Base course of floor consisting of 100 mm thick cement concrete 1:8:16 with stone aggreate and 100 mm sand filling.(using mechanical mixer for mixing of material)	Iteam28	157.8	sqm
30	30	Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :	Iteam29	53.21	sqm
31	31	Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing	Iteam30	6.82	sqm
32	32	Providing and fixing Morwad Marble strip 18 mm to 20 mm thick and 100 mm wide in Kotah Stone Flooring over 12.50 mm thick base of cement mortar 1:3 jointed with cement slurry including cost of additional mortar equivalent to the kotah stone thickness and colouring pigment to match the colour rubbed and polished to granolithic finish complete in all respects.	Iteam31	58.25	Rmt
33	33	Providing and laying vitrified floor tiles in\ndifferent sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / hickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)\na) size 600 x 600 mm	Iteam32	103.18	Sqm
34	34	Providing and Laying Out Door Precast Designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement :3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-in-charge.	Iteam33	53.97	Sqm
35	35	Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge.
36	36	Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter.	Iteam34	47.77	Rmt
37	37	Doors and windows frame of size 161mm x 60mm with 40 mm wide double rebate weighing 4.05 kg per meter.	Iteam35	52.77	Rmt
38	38	Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.	Iteam36	149.08	Rmt
39	39	Deodar wood doors shutter windows\nshutter including hinges, screw and cords\netc. Complete fixed in position
40	40	Panelled, glazed or glazed and panelled.	Iteam37	33.51	sqm
41	41	Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.	Iteam38	5.41	Qtl
42	42	Providing Polyster Powder coating 60 to 70 micron any coloured specrified to M.S Grill section of various sizes including carrriage of material from marktet to workshop ..	Iteam39	541.14	kg
43	43	Providing and fixing 16 gauge stainless steel pipe of various sizes railing of grade 304 duly fixed on ramp with the help of bolts grouted on floor with hand rail and newel post of 50 mm dia stainless steel pipe, balusters of 40 mm dia stainless steel pipe complete in all respect as per specification and entire satisfaction of Engineer-in-Charge. (Railing on Entrance Ramp Design as per guidelines issued for persons with disability)	Iteam40	14.63	Rmt
44	44	Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35 mm thick	Iteam41	22.58	sqm
45	45	Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)	Iteam42	22.58	sqm
46	46	Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300 mm x 16 mm	Iteam43	10	No.
47	47	Providing and fixing 0.50 mm thick aluminium sheet including cost of necessary fittings i.e. screws, etc. complete	Iteam44	3.48	sqm
48	48	Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete - \nI.S.I Designation No. III (size of door 851 mm to 1000 mm)	Iteam45	1	No.
49	49	Providing and fixing 12mm thick 150mm wide pelmets with 25mm dia Aluminium rod and brackets including fixing with 25mmx3mm MS Flat 10cm long and PVC Plug etc complete\nDeodar Wood	Iteam46	19.81	Rmt
50	50	Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-2006, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete	Iteam47	35.88	Qtl
51	51	Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish	Iteam48	1004.61	sqm
52	52	Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface	Iteam49	530.45	sqm
53	53	Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)	Iteam50	530.45	sqm
54	54	Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.	Iteam51	45.16	sqm
55	55	Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.	Iteam52	45.16	sqm
56	56	Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.	Iteam53	45.16	sqm
57	57	Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm	Iteam54	474.16	sqm
58	58	CONSTRUCTION OF INTERNAL ROADS, PARKING & PAVEMENT
59	59	Cement concrete 1:4:8
60	60	With stone aggregate 40mm gauge
61	61	mixing by mechanical means using concrete mixer volumetric type	Iteam55	21.51	Cum.
62	62	Plain Cement Concrete Pavement Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with OPC 43 grade conforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications	Iteam56	5.94	Cum.
63	63	Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footoaths).	Iteam57	44.59	sqm
64	64	Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M- 35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in\nOrdinary Grey Colour and pattern over and\nincluding 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in- Charge.	Iteam58	11.15	sqm
65	65	INTERNAL SEWERAGE SYSTEM
66	66	Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS -13592 of approved make (to the approval of Engineer-in-charge)including cutting, jointing, wastage, but excluding cost of lead jointing.
67	67	Single Socket Type B
68	68	110 mm o/d SWR UPVC pipe line laid complete	Iteam59	21.34	Mtr.
69	69	90 mm o/d SWR UPVC pipe line laid complete	Iteam60	12.19	Mtr.
70	70	Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining..
71	71	For 110 mm o/d pipes	Iteam61
72	72	Elbow 90 Degree (All side socketed)	Iteam62	5	No.
73	73	Coupler	Iteam63	5	Nos.
74	74	For 75 mm o/d pipes	Iteam64
75	75	Elbow 90 Degree (All side socketed)	Iteam65	4	Nos.
76	76	Coupler	Iteam66	4	Nos.
77	77	P Trap/Floor Trap 75mm x 75mm	Iteam67	7	Nos.
78	78	Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150 mm x 150 mm , cover and frame clear opening 300 mm x 300 mm and out of side size 330 mm x 330 mm and chamber including cost of all bricks work in cement mortar 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50 mm.
79	79	100 mm internal Diameter S.W. Gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300 mm x 300 mm and out of side size 330 mm x 330 mm	Iteam68	4	Nos.
80	80	Construction of brick masonry inspectionchambers size as given below upto 0.60 etre average depth in 1:5 cement sandmortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
81	81	Size 450 mm x 450 mm inside with RCC 455 mm x 455 mm cover and frame light duty double seal	Iteam69	3	Nos.
82	82	Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete.
83	83	uPVC Pipe 6 Kgf/cm2 - 50 mm i/d	Iteam70	6.1	Mtr.
84	84	Internal Water Supply System
85	85	Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.), painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.
86	86	15 mm i/d	Iteam71	20	Mtr.
87	87	20 mm i/d	Iteam72	20	Mtr.
88	88	25 mm i/d	Iteam73	15	Mtr.
89	89	40 mm i/d	Iteam74	20	Mtr.
90	90	Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. \nSize 75 mm x 75 mm	Iteam75	60	Mtr.
91	91	Cutting holes up to 23 cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same & finishing according to existing finish where required.
92	92	Through wall 11.43 cm thick	Iteam76	5	Nos.
93	93	Through wall 22.86 cm thick	Iteam77	10	Nos.
94	94	Providing, fixing and jointing G.I Union Couplings (of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
95	95	15 mm i/d G.I. Union	Iteam78	4	Nos.
96	96	20 mm i/d G.I. Union	Iteam79	4	Nos.
97	97	25 mm i/d G.I. Union	Iteam80	4	Nos.
98	98	40 mm i/d G.I. Union	Iteam81	4	Nos.
99	99	Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
100	100	25 mm i/d Brass Ball valves	Iteam82	2	Nos.
101	101	40 mm i/d Brass Ball valves	Iteam83	2	Nos.
102	102	Sanitary Installation
103	103	Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.	Iteam84	1	No.
104	104	Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.	Iteam85	1	No.
105	105	Providing and fixing jet spray with 2'-6\" long PVC pipe with PTMT nut	Iteam86	1	No.
106	106	Providing & Fixing in position C.P. Brass Hexa Nipple 15 mm of approved make (to the approval of Engineer-in-charge) complete in all respect.	Iteam87	1	No.
107	107	Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.	Iteam88	2	Nos.
108	108	Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32 mm dia with one C.P. brass pillar tap complete in all respect.
109	109	Size 550 mm x 400 mm x 815 mm	Iteam89	1	Nos.
110	110	Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
111	111	Vitreous chinaware standard white pedestal for wash hand basin.	Iteam90	1	Nos.
112	112	Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.	Iteam91	2	Nos.
113	113	Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.
114	114	Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm	Iteam92	1	Nos.
115	115	Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.
116	116	PVC tube connection of size 15 mm x 375 mm with PTMT nut	Iteam93	5	Nos.
117	117	Providing and fixing PVC waste pipe 32 mm i/d of approved make (to the approval of Engineer-in-charge) complete in all respect.	Iteam94	5	Nos.
118	118	Providing & Fixing in position 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect.
119	119	C.P. brass Bib cock long nose/ long body without flange	Iteam95	1	Nos.
120	120	C.P. brass Bib cock without flange	Iteam96	2	Nos.
121	121	Providing & Fixing in position stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect.
122	122	C.P. Brass 15 mm Angle valve without flange	Iteam97	7	Nos.
123	123	C.P. Brass 15 mm Concealed stop cock with flange.	Iteam98	7	Nos.
124	124	Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect.	Iteam99	20	Nos.
125	125	Providing & Fixing in position C.P. Brass xtension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures\ncomplete in all respect.
126	126	C.P. Brass extension piece, 25mm long to 50mm long	Iteam100	20	Nos.
127	127	Providing & Fixing in position 5 mm thick bevelled edge mirror of superior glass (of approved make) complete with 4 mm thick hard board backing fixed in with rawl plugs 50 mm , C.P. brass screws and washers complete in all respect (as required by the Engineer-in- Charge) - \nSize 600 mm x 450 mm.	Iteam101	3	Nos.
128	128	Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge) complete in all respect. (Note:-To be provided only for VIP Installations and with prior approval of the Engineer-in-charge.)
129	129	C.P. brass toilet paper holder	Iteam102	2	Nos.
130	130	Providing & Fixing in position C.P./ Aluminium Khunti of approved make (to the approval of Engineer-in-charge) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect - \nC.P. Brass khunti with 3 pegs	Iteam103	2	Nos.
131	131	Providing and fixing in position vitreous Chinaware white channel of approved make (to the approval of Engineer-in-charge) of size 600 mm x 100 mm including laying and fixing in cement concrete 1:2:4 complete in all respect.	Iteam104	6	No.
132	132	Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank - Double Layer Tanks
133	133	1000 Litres capacity
134	134	500 Litres capacity	Iteam105	1500	Litres
135	135	Providing and fixing in position automatic brass Ball Cock in tanks.
136	136	Brass Ball Cock with rod and Plastic Ball.25 mm i/d	Iteam106	2	Nos.
137	137	Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
138	138	G.I. tank nipple 25 mm i/d	Iteam107	2	Nos.
139	139	Construction of Platform for placing PVC Water Storage Tank with Brick Ballast Work, Plaster, CC 1:8:16, CC 1:2:4, cement rendering etc. of required size complete in all respect.	Iteam108	2	Nos.
140	140	Flooring and wall Tiles
141	141	Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete .	Iteam109	11.27	sqm
142	142	Providing and fixing 1st quality ceramic glazed wall tiles att/SemiMatt/Glosy/Highly Glossfinish/Highlighter/embossconforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 mm & 300x300mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.	110	50.64	sqm
143	143	Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.	Iteam111	3.29	sqm
144	144	WATER COOLER
145	145	Supply & installation of self contained drinking water cooler with (Non CFC Refrigerant) energy efficient compressor of make USHA, Model No. SRA 60 120 G, cooling capacity Ltrs/hr. 60, storage type capacity 120 Ltrs. Including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make USHA/Voltas or its equivalent.	Iteam112	1	No.
146	146	Supply & installation of AQUA FLO DX UV Water purification system, capacity 60 'tr. Per hour, 100% chemical free, Dimension 210mm width x 140 mm depth x 382 mm height, in built voltage stabilizer, Hi Flo, Dual Cartridge including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make EUREKA FORBES or its equivalent.	Iteam113	1	No.
147	147	Estate Water Supply
148	148	Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including tri mm ing and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead up to 15 meter complete in all respect.
149	149	Earth work up to 1.5 m. Depth for
150	150	All classes of soil except rocky	Iteam114	5.4	Cum.
151	151	Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B- Class, premium make such as (Jindal Hisar) including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.
152	152	50 mm i/d	Iteam115	15	Mtr.
153	153	Cement concrete 1:6:12
154	154	With stone aggregate 40mm gauge
155	155	mixing by mechanical means using concrete mixer volumetric type	Iteam116	5.29	Cum.
156	156	Providing, fixing and jointing G.I Union Couplings (of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
157	157	50 mm i/d G.I. Union	Iteam117	2	Nos.
158	158	Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.
159	159	50 mm i/d Gun Metal peet valve heavy pattern.	Iteam118	2	Nos.
160	160	Providing ISI Marked G.M ferrule as per IS:2692, drilling and tapping cast iron pipe lines of all diameters and screwing in Ferrule and connections complete in all respect.
161	161	25 mm i/d Ferrule heavy duty	Iteam119	1	Nos.
162	162	Estate Sewerage
163	163	Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.
164	164	110 mm o/d pipes	Iteam120	12	Mtr.
165	165	160 mm o/d pipes	Iteam121	38	Mtr.
166	166	Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, tri mm ing sides and side slopes for sewers and manholes to full depths as shown in drawings, including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ra mm ing and restoration of surface to original level and removal of surplus spoil from the site of works, up to one chain (15 m) complete in all respects.
167	167	For depth exceeding 3.0 m but not exceeding 4.5 m B.G.L.	Iteam122	101.27	Cum.
168	168	Making soak pit 2.5 m outer Diametre 3.0 metre deep 230mm thick 1:5 brick work honey comb with bricks of Ist Class and S.W. drain pipe 100 mm Diametre, 1.8 m long complete as per standard design.	Iteam123	1	Nos.
169	169	Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m.	Iteam124	19.6	cum
170	170	C.C 1:8:16 with 40mm thick Sone bllast	Iteam125	1.06	cum
171	171	First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth	Iteam126	6.26	cum
172	172	Cement concrete 1:2:4 with stone ballast for shingle	Iteam127	0.12	cum
173	173	Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.	Iteam128	0.6	cum
174	174	12.5 mm thick cement plaster 1:2 with rendering.	Iteam129	23.76	Sqm
175	175	Proving & fixing 560mm ,500 mm,450 mm internal diameter circular or 450 mm x 600 mm clear inside opening rectangula RCC manhole cover & frame ISI marked as per IS 12592-2002 including carriage from the store of Engineer -in -charge to site of work loading unloading including stacking and setting the same to correct lines over manholes including cement conc copping (M20) around the frame etc dia of steel for lifting hook is 16 mm (for EHD and HD) 560 mm medium weight	Iteam130	3	No..
176	176	Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical\nresistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone (aggragate) complete as per design.	Iteam131	18	No.
177	177	Fire Fighting Equipment
178	178	Providing and fixing of FIRE EXTINGUISHER, CO2 type as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect.
179	179	4.5 Kg. Capacity	Iteam132	2	Nos.
180	180	Providing and fixing of FIRE EXTINGUISHER, ABC Powder type (stored pressure) as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect.
181	181	6 Kg. Capacity	Iteam133	2	Nos.
182	182	ELECTRICAL SERVICES
183	183	RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:
184	184	Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid inheavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\" deep for walls and CI 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
185	185	Wiring fan point (With fan box)	Iteam134	13	Nos.
186	186	Wiring light point	Iteam135	38	Nos.
187	187	Wiring 6Amp. wall socket point	Iteam136	12	Nos.
188	188	Wiring 6Amp. Plug control comprising wall socket point	Iteam137	4	Nos.
189	189	Wiring 16/20Amp. power plug control point	Iteam138	8	Nos.
190	190	Wiring call-bell point	Iteam139	9	Nos.
191	191	RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):\nSupply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
192	192	Wiring Telephone socket point RJ11 (one module)	Iteam140	3	Nos.
193	193	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:\nSupply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-\n
194	194	Heavy Gauge PVC Conduit Pipe 20mm dia. (Flushed)	Iteam141	100	Nos.
195	195	Heavy Gauge PVC Conduit Pipe 25mm dia.(Flushed)	Iteam142	100	Nos.
196	196	Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed)	Iteam143	25	Nos.
197	197	Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:-\nPVC Flexible Pipe 40mm dia.	Iteam144	10	Nos.
198	198	HEAVY GUAGE WELDED CONDUIT PIPES:\nSupply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-\nHGW Conduit Pipe 20mm dia. (1.6mm thick) Flushed	Iteam145	13	Mtr.
199	199	PVC INSULATED SINGLE CORE FRLS COPPER CONDUCTOR CABLE:
200	200	Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
201	201	Overall size 1.5sq.mm (Un-sheathed)	Iteam146	300	Mtr.
202	202	Overall size 2.5sq.mm (Un-sheathed)	Iteam147	500	Mtr.
203	203	Overall size 4sq.mm (Un-sheathed)	Iteam148	200	Mtr.
204	204	Overall size 10sq.mm (Un-sheathed)	Iteam149	25	Mtr.
205	205	COPPER EARTHING:\n8 SWG COPPER EARTHING ::\nEarthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length inmetre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long	Iteam150	2	Nos.
206	206	Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (On Surface)	Iteam151	100	Mtr.
207	207	SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:\nSupply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&Ndistribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
208	208	SP&N Double Door Distribution Board 8 way each	Iteam152	1	No.
209	209	MINIATURE CIRCUIT BREAKERS:\nSupply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-\n
210	210	MCB Single Pole 6-32amp. (10kA, Curve-C)	Iteam153	24	Nos.
211	211	MCB Four Pole 6-32amp. (10kA, Curve-C)	Iteam154	1	No.
212	212	DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:\nSupply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
213	213	Double Walled Corrugated HDPE Pipe 63/ 51mm (Outer/ Inner dia.)	Iteam155	100	Mtr.
214	214	Supply and erection of High quality aluminium extruded with decorative end caps glazed LED batten of Make Jaguar Item Code LGLZ01x020XC or Its equilant Make and Cat. of Philips / Wipro including erection of the same with connections, testing etc.complete in all respects as approved and desired by the Engineer in-charge at site.	Iteam156	7	Nos.
215	215	S/E of Energy Saving Fan Ceiling Fans 1200 mm sweep ( 48\" ) having two ball bearing but without regulator including flexible wire & petty material etc. for connections complete with erection, connections and testing etc. complete in all respect as approved and desired by the Engineer-in-charge at site. Make :- Crompton Entrust 50-5 Star or its equillant make Havells ES-50 Premium 5 Star /Orient.	Iteam157	13	Nos.
216	216	Supply and erection of 12\" Heavy Duty Exhaust fan (HDEF) (300mm-900RPM) Single Phase of make Crompton Model EXHD 300-6-1 or Its equialant Make Havell's Turbo Force SP / GE 151 marked heavy duty motor with die cast Aluminium rotor mounted on two ball bearing including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and louver shutter complete in all respectsas appd. and desired by the Engineer in-charge at site	Iteam158	2	Nos.
217	217	Supply and erection of Plastic Ventialtion Fan Ventilus 10\" (250 mm - 900 RPM) single Phase of make Crompton , White Colour or Its equialant Make Havell's / GE including erection, connections and testing etc. complete with flexible wire and petty material regd. for connections and louver shutter complete in all respects as approved and desired by the Engineer in-charge at site	Iteam159	1	Nos.
218	218	Supply and erection of Wall fan of 400mm sweep (16\") High Speed. Make Crompton WM Fizzair Opel White or Its equilant make Havell's / Orient ISI marked heavy duty motor with die cast Aluminium rotor mounted on two ball bearing including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and Aluminium louver shutter complete in all respects as appd. and desired by the Engineer in-charge at site.	Iteam160	1	No.
219	219	Supply and erection of Glazed LED Batten Hgh Qualty Aluminium Extruded with decorative end caps of Make Jaguar Item Code LGLZ01X0410XC or Its equilant Make and Cat. of Philips / Wipro including erection of the same with connections, testing etc.complete in all respects as approved and desired by the Engineer In-charge at site.	Iteam161	21	Nos.
220	220	Supply & erection of Computer Terminal suitable for Computer Networking with modular accessories one on. metal box 12 module 8\" x 6\", 3 Nos. Switch 6 Amp, 3 Nos. Socket 3 pin 16 Amp, 1 No. Switch 20 Amp, 1 Nos. Socket 20 Amp and 1 No. Modular Accessories including connections & testing complete in all respect as desired by the Engineer-In-Charge at site.	Iteam162	4	Nos.
221	221	XLPE INSULATED UN-ARMOURED CABLES (LOOSE):\nSupply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100\nvolts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
222	222	Overall size 25sq.mm (3½ Core) Unarmoured (Loose)	Iteam163	100	Mtr.
223	223	Supply & Erection of LED Street Light 45w in aluminium pressure Die Cast housing with touched glass cover (IP 66 protection ) of Make Jaguar Item Code LSR T 0150 4SxC or its equilant make and Cat Philips / Wipro / Halonix including erection of the same with the existing bracket fixed with pole, connections and testing etc. complete in all respects as aproved by the Engineer in charge at site.	Iteam164	4	Nos.
224	224	SINGLE ARM BRACKETS FOR GI PIPE POLE:\nSupply and erection of G.I. Pipe 40mm dia. (A-class) Single arm bracket of suitable length give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the top of the GI pipe pole having top outer dia. 80mm/100mm with GI reducer of suitable size with two coats of an approved aluminium paint complete in all respect as approved by the Engineer-in-charge at site:-\nSingle Arm Bracket 1 metre Long with G.I.\nReducer 80mm x 40mm	Iteam165	4	Nos.
225	225	SUPPLY AND ERECTION OF WIRING ACCESSORIES:\nSupply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:-
226	226	Bakelite Batten Holder (Large size)	Iteam166	2	No.
227	227	Supplying and planting permanent trees including digging of pits size 75cm x 75cm x 75cm deep, refilling the excavated earth. With with manure supplied @ 0.113 4 cum each like Neem ,Ashoka ,Dake Arjun Etc. CSR 32.16	Iteam167	9	No.
228	228	Planting ground cover plants including digging and refilling of beds with excavated soil and FYM, Fertilizer and insecticides, planting of saplings at 30cm distance from plant to plant and row to row, providing and fixing brick tiles edging. CSR 32.22	Iteam168	9	No.
229	229	Planting flower beds including digging and refilling of beds with excavated soil and FYM, fertilizer and insecticides, planting of sapling at 30cm distance from plant to plant and row to row.	Iteam169	8	sqm
230	230	Provision for One way stand post with Khurra complete in all respects.	Iteam170	1	job

Also Visit

Tenders

Punjab Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Office Building For Sub Division Office Mehal Kalan At Barnala At Water Works Site Amla Singh Wala District Barnala In Punjab Construction Of Building , Internal Roads , Parking , Foot Paths , Providing Public Health Services And All O, Water Works Site Amla Singh Wala-Punjab

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Office Building For Sub Division Office Mehal Kalan At Barnala At Water Works Site Amla Singh Wala District Barnala In Punjab Construction Of Building , Internal Roads , Parking , Foot Paths , Providing Public Health Services And All O, Water Works Site Amla Singh Wala-Punjab

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us