Tender For Set Up Of Smart Class-Karnataka

tender for Set Up Of Smart Class 1. providing and fixing laminate wall paneling top covered out of 1.5mm thick approved laminate fixed over 12mm ply finished , complete including cost and conveyance of all materials, labour for all items of work hom of equipment etc., complete as per specification.mr sf computer lab alround, 2. providing & fixing of mineral fibre suspended ceiling system in the module size of 600x600x19mm with exposed grid. the tiles should have humidity resistance (rh) of 99%, light reflectance 87%, thermal conductivity k = 0.052 0.057 w/m k, nrc 0.7,colour white, fire performance uk a2 s1, do, with anti microbial coating on the face of the tile, suitable for zone 4 area according to nf s 90 35:2003 with cleanroom class of iso 5 (class 100), decontamination class of cp1oand bacteriological cleanliness class b1 for specific strains and reduction in colony size. washability properties of 500 wash cycles as per astm d 4828 and suitable for green building application with recycled content of 37%. (i no 39.12.1) computer lab sf, 3. ksrb 8.7 1 :providing and fixing in position 10mm thick plaster of paris (gypsum anhydrous) for ceiling flat surface up to a height of 5 m above floor level over first class teak wood strips 25mm / 6mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to wooden frames (frame work to be measured and paid for separately ) including cost of materials, labor, curing complete as per specifications. (page no.52/i no.8.20) computer lab sf, 4. providing and laying of teak wood polished flooring of 12mm thick, high density timber of approved colour and design with end trims, transition, profiles, beading, 15mmthickfelt, and 20 micron polyester film with 4mm thick foam underlay etc., including cost of all mateirals, mortar, labour, curing etc., complete as per specification. (i no 14.70), 5. providing and fixing straight workstation (frame)consisting of back to back unit made out of 75 mm thick ms crca powder coated, tile based system for main and return spine, top tile finish 8 mm thick mdf covered with fabric of approved colour and one writing board (600 mm w) and one soft board (600 mm w) per workstation, bottom tile finish 9 mm thick laminate tile of approved colour, raceway- one middle raceway (600mm w) below table top per workstation and continous raceway at the skirting level, wire manager- abs plastic grommet one number per table, table top- 25 mm thick plpb with straight table top end table 25 mm thick plpb with straightedge bound hardware-m powder coated corner bkt,cantilever bkt,separator hook on bkt, l bkt and table joint plate., as per specifications, drawings and as directed by engineer in charge. 2 c) size 1200 mmw x 600mrn d x 1200 mm ht (non sharing work station with edge binding table top, single unit) lab, 6. free standing table : providing and fixing freestanding table with frames consisting of 25mm thick plpb table top, 25mm thickplpb with edge bounded end table, 18mm thick plpb with edge bounded modesty, wire manager-abs plastic grommet one number per table hard ware minifix assembly and screw leg., as per specification, drawing and directed by enginner in charge. 1500mmwx750mm dx750mm ht (edge binding table top) (i no 39.17.1) lab, 7. supplying (telishma hbgs 2d/equivalent) high back chair with ehco active synchro and gas lift with b type adj arms and nylon base of feather lite/equivalent make (rate approved by se building circle, bangalore vide for egov work technical sanction37/14 15 dt20/09/2014 annexure, sl no36) dr lab, 8. providing and fixing 100mm wide venitian blinds of window fashion fabric of taiwan make, with 50mm thick powder coated channel with balance, imported, acrylic self alignable mechanism and equally placed spacers, imported tilting mechanism for easy tilting operation, with nylon imported thread and beadings, 100mm wide imported washable reusable fabric placed with top hanger and bottom with 100mm long bottom plate connected to nylon imported bottom link chain. the rate is inclusive of drilling holes for fixing channels to the wall, fixing threads and beadings and link chains, hard ware fixtures etc., complete as per drawing, specifications. (i 39.11) lab & study, 9. interactive white board 82 ceramic steel infrared interactive white board, usb power supply, two side tool bar, response object finger, pen, any other opaque object, infrared touch technology, multi touch, operating system supports: windows 7/8/10, linux ubuntu 14.04/15.04, android 4.0 and up, mac 10.5 and up version mr, 10. providing and fixing double shutter glass door of 12mm thick plain toughened glass of approved make. the door is fixed by using any approved make hardware fitting like patch fitting, pivot, floor machine, locking arrangements and suitable ss door rails with floral glass etching for 1/3 portion of door area etc complete. the rate includes cost of all materials, labour, hire of tools & machineries, as per the specification. (i no 39.6) door d1, 11. providing and fixing wooden platform of overall size 2450x1850x175mm using wood of section 50x50mm of legs, 50x50mm for horizontals both at suitable intervals from the point of view of stability, the top of the platform covered with commercial block board of 25mm thick, all sides covered with 6mm thick one side teak plywood fixed firmly to the platform including joining the wooden sections properly using nails/screws, fevicol including cost of wood, nails/screws, fevicol, cost of painting/polishing complete as per specification including cost of all materials and labour, painting, lead & lift and as per the direction of engineer in charge of the work and also as per drawing appended. (i no 39.13.2) stage, 12. electrical & lan supplying heavy gauge pvc conduit pipe confirming to is 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of rcc ceiling and rcc wall stone structure or rawl plugs in case of brick wall (2/1.0) 1.1.3 32mm dia 2mm thick, 13. groove cutting in the wall supplying dia 2mm/2.5mm thick heavy gauge pvc conduit pipe with bends, metal junction boxes adhesive paste etc.,and bracing u or j hooks and cement plastering up to the surface of the brick level and run with 18 swg gi fish wire run through out the conduit wherever necessary (2/1.3) 1.3.3 32mm dia 2mm thick, 14. supplying and wiring adopting loop system in existing pvc conduit /casing capping using copper pvc insulated multi strand 2x1.5sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/pvc rou (pg5/2.1) 2.1.2 medium point above 3mtr up to 6mtr from tapping point to out let via switch box, 15. supplying and wiring adopting loop system in existing pvc conduit /casing capping using copper pvc insulated multi strand 2x1.5sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/pvc rou (pg5/2.1) 2.1.3 long point above 6mtr up to 10mtr from tapping point to out let via switch box, 16. supplying and fixing of modular switch/ socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. using group a materials (pg16/3.6) 3.6.3 6amps 3way socket., 17. supplying and fixing of modular switch/ socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. using group a materials (pg16/3.6) 3.6.1 6/16amps universal socket, 18. supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. the box should be firmly flush mounted after due groove cutting in brick/stone/c.c wall group a(p no.15/3.4) 3.4.4 8way, 19. supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. the box should be firmly flush mounted after due groove cutting in brick/stone/c.c wall group a (p no.15/3.4) 3.4.5 10 12way, 20. supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/pvc box. using group a materials (p no.15/3.5) 3.5.2 4moudule, 21. supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/pvc box. using group a materials (p no.15/3.5) 3.5.4 8moudule, 22. supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/pvc box. using group a materials (p no.15/3.5) 3.5.5 12moudule, 23. wiring for lighting/power circuit using one of frls pvc insulated 1100v grade, multistrand copper conductor single core wire in open or consealed system of wiring.( using group a materails) (p no.6/2.3) 2.3.2 1.5 sqmm, 24. wiring for lighting/power circuit using one of frls pvc insulated 1100v grade, multistrand copper conductor single core wire in open or consealed system of wiring.( using group a materails) (p no.6/2.3) 2.3.3 2.5 sqmm, 25. wiring for lighting/power circuit using one of frls pvc insulated 1100v grade, multistrand copper conductor single core wire in open or consealed system of wiring.( using group a materails) (p no.6/2.3) 2.3.4 4 sqmm, 26. wiring for lighting/power circuit using one of frls pvc insulated 1100v grade, multistrand copper conductor single core wire in open or consealed system of wiring.( using group a materails) (p no.6/2.3) 2.3.7 16 sqmm, 27. supplying and fixing regular mccb distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity mcbs single phase / 3 phase / single door with powder coated painting etc., made out of 14 swg ms enclosure complete .(p no.27/5.16) double door 4way tp &n 5.16.1 group a, 28. supplying and fixing regular mccb distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity mcbs single phase / 3 phase / single door with powder coated painting etc., made out of 14 swg ms enclosure complete .(p no.27/5.16) double door 12way tp &n 5.16.3 group a, 29. supplying and fixing miniature circuit breakers on existing mcb distribution boards using necessary fixing materials and c curve, indicator on/off, energy crosss 3 with short circuit break 5.17.1 group a 6 32amps sp ing capacity of 10k and complete wiring as required.(pg54/6.15)., 30. supplying, fixing and wiring earth leakage miniature circuit breaker [elmcb] 240/450v up to 300ma sensitivity on existing wood/panel board.(p no.28/5.20.3) 5.20.3 32 40 amps 4 pole, 31. supplying and fixing mccb over the existing wood/panel board using necessary screws, bolts, complete. protection of overload and short circuit with thermal magnetic/microprocessed release and earth fault as per is 13947. fourpole 100amps 25ka 5.14.7/pg27, 32. supply of recess mounted downlighter with 18w system wattage. housing shall be with powder coated pressure die cast aluminium alloy with corrosion resistant polyster powder coat & with extended heat sink. diffuser/cover made of lexan plastic material. rated life shall be l70@50000hrs which shall has inbuilt electrical protection like over/under voltage, short circuit, overload open circuit & miswiring. driver is on constant currnt out put driver . group a led recessed downlighter with 18w (pg65/12.4.3) ii.2x18watts. 4.21.3 group a, 33. supplying of 2x2 led recessed lumianaire with .. watts system wattage. housing shall be with pressure die cast alluminium alloy with corrosion proof resistant polyster powder coated. driver operates with voltage range from 100vto270v 50/60hz with short circuit, overlaod & mis-wiring protection. lumen maintenance of 705 at 50000hrs. injection mouled ply corbonae diffuser for better mechanical stability, light transmission & avoid pot hole effect. junction temp shall be 70degree celsius. group a 12.6.2 led downlight 2x2 36watts, 34. supplying and drawing utp cat 6e lan cable. (pg 54/9.1), 35. supplying and fixing of modular switch/ socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.(pg16/3.6) i) using group a materials 3.7.12 rj45/ i.o. outlet, 36. supplying and fixing patch panels for lan cabling 48port 10/100/1000 patch panel. (9.9.9/pg54), 37. supplying and fixing of network switches 48port gigabyte (managable)(9.9.1/pg54), 38. supply & providing of floor mounted rack, 39. supplying and fixing moulded case circuit breaker (mccb) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. protection of overload and short circuit with thermal magnetic/microprocessed release and earth fault as per is 13947. ( icu ics) four pole.(pg53/5.14.7) 100amps 25ka 5.14.7 group a, 40. supplying of 1.1 kv lt ug cable having alluminium condutor pvc insulated, extruded inner sheathed, galvanised, steel strip (except 2cx10sqmm wire armoured) confirming to is 3975:1990 (no. of strip indicated in gtp) & extruded pvc outer sheathed armoured cable with specified is 1554 part 1: 1988 & confirming to the attached gtp of group a 7.4.5 4 core 16sqmm (pg40/6.4) 6.4.5 3.5 core 25 sqmm, 41. supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes. (pg70/6.17) 6.17.1 1.5 sqmm, 42. supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes. (pg70/6.17) 6.17.2 2.5 sqmm, 43. supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes. (pg70/6.17) 6.17.3 4 sqmm, 44. supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes. (pg70/6.17) 6.17.4 6 sqmm, 45. supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes. (pg70/6.17) 6.17.5 10 sqmm, 46. supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes. (pg70/6.17) 6.17.6 16 sqmm, 47. supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes. (pg70/6.17) 6.17.7 25 sqmm long barrel, 48. supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes. (pg70/6.17) 6.17. 13 150 sqmm long barrel, 49. supplying fixing and wiring earth electrode for grounding of lifts, transformers, dg sets etc using 40mm dia 2.9mm thick 2.5 mtr long gi pipe with gi funnel with mesh and suitable size reducer fixed on the top of the earth electrode. the funnel should be enclosed in a cc chamber of 400x400x400mm with a cast iron cover. the earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the cc chamber. the connection from the electrode is to be established through gi strip using gi bolts and nuts. (pg 40/6.2), 50. supplying and running of gi/copper strips for grounding connections, using necessary fixing materials as required. (pg62/6.3) gi strip 6.3.1 25x3mm, 51. supplying and running of gi/copper strips for grounding connections, using necessary fixing materials as required. (pg62/6.3) copper strip 6.3.6 25x3mm, 52. supplying and running of gi/copper strips for grounding connections, using necessary fixing materials as required. (pg62/6.3) copper plate 6.3.10 600x600x3mm plate, 53. raceway, 54. air condition supplying of 2 tr split air conditioners suitable for operation on a/c supply single phase 50hz 230 volts with heretically sealed compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit. the condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube.(high wall chorded/chordless) suitable capacity 3 core sheethed/pvc copper cable and a battery operated wireless remote unit., 55. supplying and installation of insulated refrigent copper tubing of 5/8 and 3/8 with polythene foam insulation 3 core 80 stand copper wiring between indoor and out door unit. leak testing oil and gas charging for additional piping length of tube, 56. providing and fixing chorinated poly venyl chloride (cpvc) pipes conforming to is 15778, having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. this includes jointing of pipes and fittings with one step cpvc solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc.) 25mm nominal od pipes. pwd sr (105/13.86.3), 57. extra for fabrication supply and fixing of stand fabricated using slotted angle/l angle of size 6m/50mm for mounting outdoor/ indoor a.c unit/batteries (7.22/pg 49), 58. intallation charges for split type air conditioner ith allied works for one indoor and one outdoor unit is to be mounted on suitable iron support up to 3ton split/cassette type ac (7.12) av, 59. multimedia projector projector light source with long life time mercury-free illumination technology, resolution: 1,024 x 768 pixels (xga), type: laser and led hybrid technology, v contrast: 20,000:1, up to 20,000 hours without lamp replacement, significant reduction in follow-up costs, brilliant natural color reproduction, long-term projections in daylight are possible, up to 3,000 ansi lumens, 1.1x optical zoom, high quality design with optimum dust protection, quick start & stop, low power consumption., 60. pixeless ceiling mounting kit pixeless ceiling mount kit with universal base plates universal mount with vertical height adjustment 47 total height adjustment (23 +24), 61. grid ceiling speakers jbl 8 speakers 12 w, speaker cable,, 62. vga cable with audio (1.8mts.) (cable cubby to scaler below the table), 63. clicktronic hdmi cable 1.5 mts. (cable cubby to scaler below the table), 64. clicktronic hdmi cable 15 mts. from the vc to the switcher in the rack, 65. vga connectors/ ep connectors/ rs 232 connectors/ phoenix connectors/ rj 45 connectors/ hdmi jointer/ iec connectors, 66. 9u rack (colour light grey or black) 9u x 600 x 600 floor standing rack, front glass & rear steel door, top cover (no fans), side steel covers removable with one fan of either side, 19 inch pdu with 6 points of 5a sockets 1 no. with wheels, 67. vga cable, 68. patch plate with connectors, 69. 48 port switch, 70. pa system yamaha mixer mg10, 71. pa system collar / lepel mic and hand held mic, 72. pa system supplying of crown amplifier, 73. pa system installation, programming & commissioning, 74. all in one pc i5/4gb/1tb win 10/21.5 monitor keyboard & mouse, 75. firewall, 76. ups 10kva with 2hrs backup, 77. ups 1kva with 2hrs backup, 78. stage table, 79. lumens camera and usb extended cable, 80. internet for 12 months for 34pcs (1000mbps/5000gb/per month), 81. wooden podium, 82. network face plate, io connectors, rj 45 connectors, network patch cord 1mts and 2mts, 83. cctv 2nos 2mp camera, 4 channel nvr 1nos, 4port poe switch, hdd 4tb, required cabling, 84. computer:desktop core i5, 4gb, 1tb, usb kbm, 19.5 tft, win, 10 pro, 3 yrs wrnty 1 no,

INR 550 /-

INR 85000.0 /-

Refer document

Sl No	Item Code	Item Name	Item Description	Unit	Quantity
1	01/TEND/2020/RK/492/01	Providing and fixing Laminate wall paneling top covered out of 1.5mm thick approved Laminate fixed over 12mm ply finished , complete including cost and conveyance of all materials, labour for all items of work HOM of equipment etc., complete as per specification.MR SF Computer lab alround	Specification: As specified in the tender document.	Nos	98.4
2	01/TEND/2020/RK/492/02	Providing & Fixing of Mineral Fibre Suspended Ceiling System in the module size of 600x600x19mm with Exposed grid. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 87%, Thermal Conductivity k = 0.052 0.057 w/m K, NRC 0.7,Colour White, Fire Performance UK A2 S1, dO, with Anti Microbial coating on the face of the tile, suitable for zone 4 area according to NF S 90 35:2003 with cleanroom class of ISO 5 (Class 100), Decontamination Class of CP1Oand Bacteriological Cleanliness Class B1 for specific strains and reduction in colony size. Washability properties of 500 wash cycles as per ASTM D 4828 and suitable for Green Building application with Recycled content of 37%. (I No 39.12.1) Computer lab SF	Specification: As specified in the tender document.	Nos	49.5
3	01/TEND/2020/RK/492/03	KSRB 8.7 1 :Providing and fixing in position 10mm thick plaster of Paris (Gypsum anhydrous) for ceiling flat surface up to a height of 5 m above floor level over first class teak wood strips 25mm / 6mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to wooden frames (frame work to be measured and paid for separately ) including cost of materials, labor, curing complete as per specifications. (page no.52/I no.8.20) Computer lab SF	Specification: As specified in the tender document.	Nos	13.5
4	01/TEND/2020/RK/492/04	Providing and laying of teak wood polished flooring of 12mm thick, high density timber of approved colour and design with end trims, transition, profiles, beading, 15mmthickfelt, and 20 micron polyester film with 4mm thick foam underlay etc., including cost of all mateirals, mortar, labour, curing etc., complete as per specification. (I no 14.70)	Specification: As specified in the tender document.	Nos	63
5	01/TEND/2020/RK/492/05	Providing and fixing STRAIGHT WORKSTATION (Frame)consisting of back to back unit made out of 75 mm thick MS CRCA powder coated, tile based system for main and return spine, Top tile finish 8 mm thick MDF covered with Fabric of approved colour and one writing board (600 mm W) and one soft board (600 mm W) per workstation, Bottom tile finish 9 mm thick Laminate tile of approved colour, Raceway- one middle raceway (600mm W) below table top per workstation and continous raceway at the skirting level, Wire manager- ABS plastic grommet one number per table, Table top- 25 mm thick PLPB with straight table top End Table 25 mm thick PLPB with straightedge bound Hardware-M powder coated corner bkt,cantilever bkt,separator hook on bkt, L bkt and Table joint plate., as per specifications, drawings and as directed by Engineer in charge. 2 C) Size 1200 mmW x 600mrn D x 1200 mm ht (Non Sharing work station with Edge binding table top, Single unit) Lab	Specification: As specified in the tender document.	Nos	33
6	01/TEND/2020/RK/492/06	FREE STANDING TABLE : Providing and fixing Freestanding table with frames consisting of 25mm thick PLPB table top, 25mm thickPLPB with edge bounded end table, 18mm thick PLPB with edge bounded modesty, Wire manager-ABS Plastic grommet one number per table Hard ware Minifix assembly and screw leg., as per specification, Drawing and Directed by Enginner in charge. 1500mmWx750mm Dx750mm ht (Edge binding table top) (I No 39.17.1) Lab	Specification: As specified in the tender document.	Nos	2
7	01/TEND/2020/RK/492/07	Supplying (Telishma HBGS 2D/equivalent) high back chair with ehco active synchro and gas lift with B type adj arms and nylon base of Feather lite/equivalent make (rate approved by SE building circle, Bangalore vide for egov work technical sanction37/14 15 dt20/09/2014 annexure, Sl no36) DR Lab	Specification: As specified in the tender document.	Nos	35
8	01/TEND/2020/RK/492/08	Providing and fixing 100mm wide venitian blinds of window fashion fabric of Taiwan make, with 50mm thick powder coated channel with balance, imported, acrylic self alignable mechanism and equally placed spacers, imported tilting mechanism for easy tilting operation, with nylon imported thread and beadings, 100mm wide imported washable reusable fabric placed with top hanger and bottom with 100mm long bottom plate connected to nylon imported bottom link chain. The rate is inclusive of drilling holes for fixing channels to the wall, fixing threads and beadings and link chains, hard ware fixtures etc., complete as per drawing, specifications. (I 39.11) Lab & Study	Specification: As specified in the tender document.	Nos	18.29
9	01/TEND/2020/RK/492/09	Interactive White Board 82 Ceramic Steel Infrared Interactive White Board, USB Power Supply, Two Side Tool Bar, Response Object Finger, Pen, any other Opaque Object, Infrared Touch Technology, Multi Touch, Operating System Supports: Windows 7/8/10, Linux Ubuntu 14.04/15.04, Android 4.0 and up, Mac 10.5 and up Version MR	Specification: As specified in the tender document.	Nos	2
10	01/TEND/2020/RK/492/10	Providing and fixing Double shutter glass door of 12mm thick plain toughened glass of approved make. The door is fixed by using any approved make hardware fitting like patch fitting, pivot, floor machine, locking arrangements and suitable SS door rails with floral glass etching for 1/3 portion of door area etc complete. The rate includes cost of all materials, labour, hire of tools & machineries, as per the specification. (I No 39.6) Door D1	Specification: As specified in the tender document.	Nos	5.67
11	01/TEND/2020/RK/492/11	Providing and fixing wooden platform of overall size 2450x1850x175mm using wood of section 50x50mm of legs, 50x50mm for horizontals both at suitable intervals from the point of view of stability, the top of the platform covered with commercial block board of 25mm thick, all sides covered with 6mm thick one side teak plywood fixed firmly to the platform including joining the wooden sections properly using nails/screws, fevicol including cost of wood, nails/screws, fevicol, cost of painting/polishing complete as per specification including cost of all materials and labour, painting, lead & lift and as per the direction of Engineer in Charge of the work and also as per drawing appended. (I No 39.13.2) Stage	Specification: As specified in the tender document.	Nos	4.53
12	01/TEND/2020/RK/492/12	ELECTRICAL & LAN Supplying heavy gauge PVC conduit pipe confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick wall (2/1.0) 1.1.3 32mm dia 2mm thick	Specification: As specified in the tender document.	Nos	85
13	01/TEND/2020/RK/492/13	Groove cutting in the wall supplying dia 2mm/2.5mm thick heavy gauge PVC Conduit Pipe with bends, metal junction boxes adhesive paste etc.,and bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary (2/1.3) 1.3.3 32mm dia 2mm thick	Specification: As specified in the tender document.	Nos	30
14	01/TEND/2020/RK/492/14	Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC rou (pg5/2.1) 2.1.2 Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box	Specification: As specified in the tender document.	Nos	20
15	01/TEND/2020/RK/492/15	Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC rou (pg5/2.1) 2.1.3 Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box	Specification: As specified in the tender document.	Nos	25
16	01/TEND/2020/RK/492/16	Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Using Group A materials (pg16/3.6) 3.6.3 6Amps 3way socket.	Specification: As specified in the tender document.	Nos	25
17	01/TEND/2020/RK/492/17	Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Using Group A materials (pg16/3.6) 3.6.1 6/16Amps universal socket	Specification: As specified in the tender document.	Nos	5
18	01/TEND/2020/RK/492/18	Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall Group A(P no.15/3.4) 3.4.4 8Way	Specification: As specified in the tender document.	Nos	8
19	01/TEND/2020/RK/492/19	Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall Group A (P no.15/3.4) 3.4.5 10 12Way	Specification: As specified in the tender document.	Nos	4
20	01/TEND/2020/RK/492/20	Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Using Group A materials (p no.15/3.5) 3.5.2 4Moudule	Specification: As specified in the tender document.	Nos	5
21	01/TEND/2020/RK/492/21	Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Using Group A materials (p no.15/3.5) 3.5.4 8Moudule	Specification: As specified in the tender document.	Nos	180
22	01/TEND/2020/RK/492/22	Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Using Group A materials (p no.15/3.5) 3.5.5 12Moudule	Specification: As specified in the tender document.	Nos	4
23	01/TEND/2020/RK/492/23	Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor single core wire in open or consealed system of wiring.( using group A Materails) (p no.6/2.3) 2.3.2 1.5 sqmm	Specification: As specified in the tender document.	Nos	250
24	01/TEND/2020/RK/492/24	Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor single core wire in open or consealed system of wiring.( using group A Materails) (p no.6/2.3) 2.3.3 2.5 sqmm	Specification: As specified in the tender document.	Nos	200
25	01/TEND/2020/RK/492/25	Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor single core wire in open or consealed system of wiring.( using group A Materails) (p no.6/2.3) 2.3.4 4 sqmm	Specification: As specified in the tender document.	Nos	150
26	01/TEND/2020/RK/492/26	Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor single core wire in open or consealed system of wiring.( using group A Materails) (p no.6/2.3) 2.3.7 16 sqmm	Specification: As specified in the tender document.	Nos	15
27	01/TEND/2020/RK/492/27	Supplying and fixing regular MCCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCBs single phase / 3 phase / single door with powder coated painting etc., Made out of 14 SWG MS enclosure complete .(p no.27/5.16) Double Door 4Way TP &N 5.16.1 Group A	Specification: As specified in the tender document.	Nos	1
28	01/TEND/2020/RK/492/28	Supplying and fixing regular MCCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB\s single phase / 3 phase / single door with powder coated painting etc., Made out of 14 SWG MS enclosure complete .(p no.27/5.16) Double door 12Way TP &N 5.16.3 Group A	Specification: As specified in the tender document.	Nos	1
29	01/TEND/2020/RK/492/29	Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C curve, indicator ON/OFF, energy crosss 3 with short circuit break 5.17.1 Group A 6 32Amps SP ing capacity of 10K and complete wiring as required.(pg54/6.15).	Specification: As specified in the tender document.	Nos	10
30	01/TEND/2020/RK/492/30	Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board.(p no.28/5.20.3) 5.20.3 32 40 Amps 4 pole	Specification: As specified in the tender document.	Nos	1
31	01/TEND/2020/RK/492/31	Supplying and fixing MCCB over the existing wood/panel board using necessary screws, bolts, complete. Protection of overload and short circuit with thermal magnetic/microprocessed release and earth fault as per IS 13947. FourPole 100amps 25kA 5.14.7/pg27	Specification: As specified in the tender document.	Nos	1
32	01/TEND/2020/RK/492/32	Supply of recess mounted downlighter with 18w system wattage. Housing shall be with powder coated pressure die cast aluminium alloy with corrosion resistant polyster powder coat & with extended heat sink. Diffuser/cover made of Lexan plastic material. Rated life shall be L70@50000Hrs which shall has inbuilt electrical protection like over/under voltage, short circuit, overload open circuit & miswiring. Driver is on constant currnt out put driver . Group A LED recessed downlighter with 18W (pg65/12.4.3) II.2x18Watts. 4.21.3 GROUP A	Specification: As specified in the tender document.	Nos	8
33	01/TEND/2020/RK/492/33	Supplying of 2\x2\ LED recessed lumianaire with .. Watts system wattage. Housing shall be with pressure die cast alluminium alloy with corrosion proof resistant polyster powder coated. Driver operates with voltage range from 100vto270v 50/60Hz with short circuit, overlaod & mis-wiring protection. Lumen maintenance of 705 at 50000Hrs. INjection mouled ply corbonae diffuser for better mechanical stability, light transmission & avoid pot hole effect. Junction temp shall be 70degree celsius. Group A 12.6.2 LED downlight 2x2 36watts	Specification: As specified in the tender document.	Nos	8
34	01/TEND/2020/RK/492/34	Supplying and drawing UTP CAT 6E LAN cable. (pg 54/9.1)	Specification: As specified in the tender document.	Nos	950
35	01/TEND/2020/RK/492/35	Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.(pg16/3.6) I) Using Group A materials 3.7.12 RJ45/ I.O. outlet	Specification: As specified in the tender document.	Nos	20
36	01/TEND/2020/RK/492/36	Supplying and fixing patch panels for LAN cabling 48port 10/100/1000 patch panel. (9.9.9/Pg54)	Specification: As specified in the tender document.	Nos	1
37	01/TEND/2020/RK/492/37	Supplying and fixing of network switches 48port gigabyte (managable)(9.9.1/pg54)	Specification: As specified in the tender document.	Nos	1
38	01/TEND/2020/RK/492/38	Supply & providing of floor mounted Rack	Specification: As specified in the tender document.	Nos	1
39	01/TEND/2020/RK/492/39	Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Microprocessed release and Earth Fault as per IS 13947. ( Icu Ics) FOUR POLE.(pg53/5.14.7) 100Amps 25kA 5.14.7 Group A	Specification: As specified in the tender document.	Nos	1
40	01/TEND/2020/RK/492/40	Supplying of 1.1 KV LT UG cable having alluminium condutor PVC insulated, extruded inner sheathed, galvanised, steel strip (except 2cx10sqmm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS 1554 Part 1: 1988 & confirming to the attached GTP of GROUP A 7.4.5 4 core 16sqmm (pg40/6.4) 6.4.5 3.5 core 25 sqmm	Specification: As specified in the tender document.	Nos	50
41	01/TEND/2020/RK/492/41	Supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes. (pg70/6.17) 6.17.1 1.5 sqmm	Specification: As specified in the tender document.	Nos	15
42	01/TEND/2020/RK/492/42	Supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes. (pg70/6.17) 6.17.2 2.5 sqmm	Specification: As specified in the tender document.	Nos	20
43	01/TEND/2020/RK/492/43	Supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes. (pg70/6.17) 6.17.3 4 sqmm	Specification: As specified in the tender document.	Nos	30
44	01/TEND/2020/RK/492/44	Supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes. (pg70/6.17) 6.17.4 6 sqmm	Specification: As specified in the tender document.	Nos	20
45	01/TEND/2020/RK/492/45	Supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes. (pg70/6.17) 6.17.5 10 Sqmm	Specification: As specified in the tender document.	Nos	20
46	01/TEND/2020/RK/492/46	Supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes. (pg70/6.17) 6.17.6 16 sqmm	Specification: As specified in the tender document.	Nos	20
47	01/TEND/2020/RK/492/47	Supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes. (pg70/6.17) 6.17.7 25 sqmm Long barrel	Specification: As specified in the tender document.	Nos	20
48	01/TEND/2020/RK/492/48	Supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes. (pg70/6.17) 6.17. 13 150 sqmm Long barrel	Specification: As specified in the tender document.	Nos	10
49	01/TEND/2020/RK/492/49	Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. (pg 40/6.2)	Specification: As specified in the tender document.	Nos	1
50	01/TEND/2020/RK/492/50	Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. (pg62/6.3) GI Strip 6.3.1 25x3mm	Specification: As specified in the tender document.	Nos	25
51	01/TEND/2020/RK/492/51	Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. (pg62/6.3) Copper Strip 6.3.6 25x3mm	Specification: As specified in the tender document.	Nos	25
52	01/TEND/2020/RK/492/52	Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. (pg62/6.3) Copper plate 6.3.10 600x600x3mm plate	Specification: As specified in the tender document.	Nos	1
53	01/TEND/2020/RK/492/53	Raceway	Specification: As specified in the tender document.	Nos	8
54	01/TEND/2020/RK/492/54	AIR CONDITION Supplying of 2 TR split air conditioners suitable for operation on A/C supply single phase 50Hz 230 volts with heretically sealed compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit. the condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube.(high wall chorded/chordless) suitable capacity 3 core sheethed/PVC copper cable and a battery operated wireless remote unit.	Specification: As specified in the tender document.	Nos	8
55	01/TEND/2020/RK/492/55	Supplying and installation of insulated refrigent copper tubing of 5/8 and 3/8 with polythene foam insulation 3 core 80 stand copper wiring between indoor and out door unit. Leak testing oil and gas charging for additional piping length of tube	Specification: As specified in the tender document.	Nos	120
56	01/TEND/2020/RK/492/56	Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) 25mm nominal OD pipes. PWD SR (105/13.86.3)	Specification: As specified in the tender document.	Nos	240
57	01/TEND/2020/RK/492/57	Extra for fabrication supply and fixing of stand fabricated using slotted angle/L angle of size 6m/50mm for mounting outdoor/ indoor A.C unit/Batteries (7.22/pg 49)	Specification: As specified in the tender document.	Nos	12
58	01/TEND/2020/RK/492/58	Intallation charges for split type air conditioner ith allied works for one indoor and one outdoor unit is to be mounted on suitable iron support up to 3ton split/cassette type AC (7.12) AV	Specification: As specified in the tender document.	Nos	12
59	01/TEND/2020/RK/492/59	Multimedia Projector Projector Light source with long life time Mercury-free illumination technology, Resolution: 1,024 x 768 pixels (XGA), Type: Laser and LED hybrid technology, v Contrast: 20,000:1, Up to 20,000 hours without lamp replacement, Significant reduction in follow-up costs, Brilliant natural color reproduction, Long-term projections in daylight are possible, Up to 3,000 ANSI lumens, 1.1x optical zoom, High quality design with optimum dust protection, Quick Start & Stop, Low power consumption.	Specification: As specified in the tender document.	Nos	2
60	01/TEND/2020/RK/492/60	Pixeless Ceiling Mounting Kit Pixeless Ceiling Mount Kit with universal base plates Universal mount with vertical height adjustment 47 Total height adjustment (23 +24)	Specification: As specified in the tender document.	Nos	2
61	01/TEND/2020/RK/492/61	Grid Ceiling Speakers JBL 8 Speakers 12 W, Speaker Cable,	Specification: As specified in the tender document.	Nos	16
62	01/TEND/2020/RK/492/62	VGA Cable with Audio (1.8mts.) (Cable cubby to scaler below the table)	Specification: As specified in the tender document.	Nos	2
63	01/TEND/2020/RK/492/63	Clicktronic HDMI Cable 1.5 mts. (Cable cubby to scaler below the table)	Specification: As specified in the tender document.	Nos	2
64	01/TEND/2020/RK/492/64	Clicktronic HDMI Cable 15 mts. from the VC to the switcher in the rack	Specification: As specified in the tender document.	Nos	2
65	01/TEND/2020/RK/492/65	VGA Connectors/ EP Connectors/ RS 232 Connectors/ Phoenix Connectors/ RJ 45 Connectors/ HDMI Jointer/ IEC Connectors	Specification: As specified in the tender document.	Nos	2
66	01/TEND/2020/RK/492/66	9U Rack (Colour Light Grey or Black) 9U x 600 x 600 Floor Standing Rack, Front Glass & rear Steel Door, Top cover (no fans), Side Steel Covers removable with one fan of either side, 19 inch PDU with 6 points of 5A sockets 1 no. with wheels	Specification: As specified in the tender document.	Nos	2
67	01/TEND/2020/RK/492/67	Vga cable	Specification: As specified in the tender document.	Nos	30
68	01/TEND/2020/RK/492/68	patch plate with connectors	Specification: As specified in the tender document.	Nos	2
69	01/TEND/2020/RK/492/69	48 Port Switch	Specification: As specified in the tender document.	Nos	1
70	01/TEND/2020/RK/492/70	PA System Yamaha mixer MG10	Specification: As specified in the tender document.	Nos	2
71	01/TEND/2020/RK/492/71	PA System Collar / Lepel mic and Hand held Mic	Specification: As specified in the tender document.	Nos	2
72	01/TEND/2020/RK/492/72	PA System Supplying of Crown amplifier	Specification: As specified in the tender document.	Nos	2
73	01/TEND/2020/RK/492/73	PA System Installation, programming & Commissioning	Specification: As specified in the tender document.	Nos	2
74	01/TEND/2020/RK/492/74	All in One PC i5/4GB/1TB Win 10/21.5 Monitor Keyboard & Mouse	Specification: As specified in the tender document.	Nos	33
75	01/TEND/2020/RK/492/75	Firewall	Specification: As specified in the tender document.	Nos	1
76	01/TEND/2020/RK/492/76	UPS 10KVA with 2hrs backup	Specification: As specified in the tender document.	Nos	1
77	01/TEND/2020/RK/492/77	UPS 1KVA with 2hrs backup	Specification: As specified in the tender document.	Nos	1
78	01/TEND/2020/RK/492/78	Stage table	Specification: As specified in the tender document.	Nos	2
79	01/TEND/2020/RK/492/79	Lumens Camera and USB Extended Cable	Specification: As specified in the tender document.	Nos	2
80	01/TEND/2020/RK/492/80	Internet for 12 Months for 34Pcs (1000Mbps/5000GB/per month)	Specification: As specified in the tender document.	Nos	1
81	01/TEND/2020/RK/492/81	Wooden Podium	Specification: As specified in the tender document.	Nos	2
82	01/TEND/2020/RK/492/82	Network Face Plate, IO Connectors, RJ 45 Connectors, Network Patch Cord 1mts and 2mts	Specification: As specified in the tender document.	Nos	1
83	01/TEND/2020/RK/492/83	CCTV 2nos 2MP Camera, 4 Channel NVR 1nos, 4Port POE Switch, HDD 4TB, required Cabling	Specification: As specified in the tender document.	Nos	2
84	01/TEND/2020/RK/492/84	Computer:Desktop Core i5, 4GB, 1TB, USB KBM, 19.5 TFT, Win, 10 Pro, 3 Yrs Wrnty 1 No	Specification: As specified in the tender document.	Nos	2