Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-01-2021 | CERTAIN AMENDMENT | Financial Bid | 04-02-2021 |
| 2 | 28-01-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-02-2021 |
| 3 | 20-01-2021 | Revised BOQ | BOQ | 28-01-2021 |
| Name of Work: PROVN OF AUTOMATIC METER READING AND BILLING SYSTEM AT VIJAY AND SANCHI ENCLAVE AT BAIRAGARH (LBW-38) AND CERTAIN SANCTIONED WORKS (SRW-48, LBW-10, REV-18 AND MINOR WORK 29,30,32 & 34) UNDER GE BHOPAL. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Note : Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below:-\nITEMS FOR PHASE -I WORK (consisting of Ser item No 1.10 to 169.00) | |||
| 2 | 1.1 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately), removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors, etc.complete all as specified and directed. | 126 | Per Point | |
| 3 | 2 | M&L for point wiring complete for light/fan on independent / combine with cable 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade, ISI marked controlled by one one-way switch, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories (PVC casing and capping of size 25 mm , ISI marked with complete accessories to be used wherever wiring to be run on ceilings and concrete surfaces) including one run of 1.5 sqmm FRLS muti-stranded copper conductor (green colour cable) as earth continuity wire connected to common earth dolly, including sunk sheet steel terminal box made out of 1.20 mm thick and not less than 60 mm in depth GI/MS/ pressed steel terminal box to be concealed in wall, duly painted with two coats of anti corrosive black bituminous paint over a coat of red oxide primer in and out sides and two coated of aluminium paint on internal surface , including laminated hylum sheet cover, ISI marked for mounting of fittings like switches, sockets, fan regulators, etc. fixed with galvanised screw and cup washer complete all as specified and directed. \nNote : (i) Wiring to be done as per approved colour code in IE rule.(ii) Rate includes chase cutting for concealed wiring. [Make of Cable : Polycab/ Plaza/ Havells] | 76 | Per Point | |
| 4 | 3 | All as per BOQ item No. 2.00 here-in-before, but for one light point controlled by two way switch, complete all as specified and directed. | 2 | Per Point | |
| 5 | 4 | All as per BOQ item No. 2.00 here-in-before, but for one switch socket combination 5/6 Amp on independent board, complete all as specified and directed. | 20 | Per Point | |
| 6 | 5 | All as per BOQ item No. 2.00 here-in-before, but for one three pin outlet 5 Amp on same board with other switches, complete all as specified and directed. | 16 | Per Point | |
| 7 | 6 | All as per BOQ item No. 2.00 here-in-before, but for one switch socket combination 6 pin 5 /15 Amp on independent board with wire of size 2.5 sqmm and 1.5 sqmm as earth wire, complete all as specified and directed. | 12 | Per Point | |
| 8 | 7 | S&F Switch piano, flush type, single pole, one way, 6 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed. [MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/LEGRAND/HAVELLS as approved by GE] | 88 | Each | |
| 9 | 8 | S&F Two way switch piano, flush type, single pole, one way, 6 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed. [MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/LEGRAND/HAVELLS as approved by GE] | 4 | Each | |
| 10 | 9 | S&F Bell push, flush type, 6 Amp piano type, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed. \n[MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/LEGRAND/HAVELLS as approved by GE] | 4 | Each | |
| 11 | 10 | S&F Switch socket combination 5 pin, type 5/6 Amps flush type, 230 volt AC complete all as specified and directed.\nMAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/LEGRAND/HAVELLS as approved by GE | 20 | Each | |
| 12 | 11 | S&F Socket outlet 5 pin 15 Amp flush type, 240 volt AC complete all as specified and as directed. \n[MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/LEGRAND/HAVELLS as approved by GE] | 16 | Each | |
| 13 | 12 | S&F Switch socket combination 6 pin, type 5/15 Amps flush type, 230 volt AC complete all as specified and directed.\nMAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/LEGRAND/HAVELLS as approved by GE | 12 | Each | |
| 14 | 13 | S&F Ceiling rose surface bakelite, three terminals, 240V, 50Hz, ISI marked complete all as specified and as directed. [MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/LEGRAND/HAVELLS as approved by GE] | 38 | Each | |
| 15 | 14 | S&F Bell, Ding Dong type, electric, single phase, 240 volt, AC complete all as specified and as directed. [MAKE:-ANCHOR (PENTA PC series) or equivalent in LEADER/ CRABTREE/LEGRAND /HAVELLS as approved by GE] | 4 | Each | |
| 16 | 15 | S&F LED tube light fitting, surface mounted lumanaires, 1 x 18 W, 240V, decorative ultra slim round /squar profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack with bipin holders, LED lamps,connector block, etc. complete with all accessories internally pre-wired and including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.\nMake : Havells Cat No : LHEXBLP7N1W018 or equivalant in C&G/Bajaj/Surya | 27 | Each | |
| 17 | 16 | S&F Angle holder, PVC/Poly carbonate type with back plate suitable for batten fittings complete all as spcified and directed.\n[MAKE FOR HOLDER:-ANCHOR (PENTA PC series)/ LEADER/ CRABTREE/LEGRAND/HAVELLS as approved by GE] | 28 | Each | |
| 18 | 17 | S&F LED lamp 10 watt, B22 CDL complete all as spcified and directed.\n | 28 | Each | |
| 19 | 18 | S&F building security light fitting 20 W made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC over having top opening separate driver compartment with IP-66 protection and impact resistance of IK07 with suitable galvanised iron pipe 'light grade' brackets 1 mtr length bent to shape to obtained required shape including clamps, nuts, bolts, washers etc. connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and as directed.\nMake :- Havells Cat No. ENDURAPEARLSL20WLED757SASYTOPCMP/Bajaj/Surya | 4 | Each | |
| 20 | 19 | S&F exhaust fan 230 mm sweep, metal body, complete with louvers incl all civil work like cutting and making circular opening in existing wall of kitchen etc. incl connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified & directed. \nMake-CG/Bajaj/Havells | 4 | Each | |
| 21 | 20 | S&F Ceiling fan 1200 mm sweep, 240 V complete with accessories, complete all as specified and as directed. [MAKE: Havells/ C&G/ Bajaj/Usha as approved by GE] | 12 | Each | |
| 22 | 21 | S&F fan step regulator, 120 watts, 2 module complete all as specified and directed. (Make:- Legrand (Cat. No.573469) or equivalent in Anchor ROMA DEKO 'D' series / Crabtree)\n\n | 12 | Each | |
| 23 | 22 | M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100V unsheathed with stranded copper conductor of 6.0 sqmm nominal cross section area and drawing into and including concealed 25mm dia, rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc and PVC insulated stranded copper conductor of 4.0 sqmm nominal cross section area as earth wire complete all as specified and directed. \nNote: - (i) Two runs of 6.0 sqmm cable, one run of 4.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.(ii) Cutting chases & making good for concealed sub main wiring will be measured and paid sepeartely under susequent item.[Make of Cable : Polycab/ Plaza/ Havells] | 120 | RM | |
| 24 | 23 | Supply and fixing factory made epoxy powder coated Distribution Board TP & N 4 ways ( VTPN MCCB DB ) and space for MCCB as incomer, with metal door ( IP-43 protection ) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated Neutral Bar, Insulated busbar assembly, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified and directed.\n[MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE]\nNOTE:- MCCB shall be measured and paid seperatly. \n | 1 | Each | |
| 25 | 24 | S&F of MCCB 3 pole, 415 Volt fixed type, 100 Amp 16kA breaking capacity complete all as specified and directed. \nMake :- Havells/Indo Asian /L&T. | 1 | Each | |
| 26 | 25 | S&F sheet metal enclosure double door type surface mounted concealed in wall 8 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed. \n[MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE]\nNOTE:- MCB shall be measured and paid separately. \n | 4 | Each | |
| 27 | 26 | S&F in repairs MCB SP, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 5 to 32 amps including connection with suitable size aluminium / copper lugs complete all as specified and directed. \n[MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE] | 24 | Each | |
| 28 | 27 | S&F in repairs MCB SP suitable for 240 volts, AC supply 40 to 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.\n[MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE] | 4 | Each | |
| 29 | 28 | S&F in repairs MCB SPN suitable for 240 volts, AC supply 6 to 32 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA, complete all as specified and directed.\n[MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE] | 4 | Each | |
| 30 | 29 | S & F in repairs MCB SPN suitable for 240 volts, AC supply 40 to 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.\n[MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE] | 6 | Each | |
| 31 | 30 | M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR-2009 Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by 15mm dia light grade GI pipe and watering pipe shall be 20mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed.\nNOTE :-\n(i) The concrete pit shall be PCC (1:3:6) type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I.\n(ii) The unit rate includes the cost of GI pipe medium grade for protection of earth wire and 4mm dia earh lead wire upto 7.5 M. \n(iii) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself.\n | 1 | Each Job | |
| 32 | 31 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed. | 32 | Cum | |
| 33 | 32 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed. | 24 | Cum | |
| 34 | 33 | Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. | 8 | Cum | |
| 35 | 34 | S&F GI tubing light grade 40 mm dia with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps including necessary nut,bolt and washer or for protection of GI wire, etc complete all as specified and directed. | 20 | RM | |
| 36 | 35 | M&L for cutting PCC/floor/road for taking out/ laying of cable, GI earth wire etc in protection pipe and making good, including material as per existing after laying of pipe for cable protection, GI wire etc, size of trench not more than 0.30 x 0.30 m complete all as specified and directed. | 10 | RM | |
| 37 | 36 | S&F for LT UG cable, 3.5 core of 25 sqmm, ISI marked, XLPE insulated, sheathed, armoured heavy duty, 1100 Volts, with aluminium conductor multi strandedincluding cable connecting lugs, glands, joining material etc. laid in trenches, floors, ducts, walls, poles, complete with suitable clips, complete all as specified and directed. | 85 | RM | |
| 38 | 37 | M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. [Note:-Compacted/punned thickness shall be measured & paid] | 6.5 | Cum | |
| 39 | 38 | Supplying and laying sub class 'B' bricks (modular) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed | 0.5 | Per 1000 Nos | |
| 40 | 39 | Taking up or down steel tubing and connections 40 mm bore, including cleaning (tubings only and not connections) complete all as specified and directed. | 50 | RM | |
| 41 | 40 | Taking up or down steel tubing and connections 25 mm bore, including cleaning (tubings only and not connections) complete all as specified and directed. | 55 | RM | |
| 42 | 41 | Taking up or down steel tubing and connections 20 mm bore, including cleaning (tubings only and not connections) complete all as specified and directed. | 65 | RM | |
| 43 | 42 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 40 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. [MAKE: TATA/ SURYA/ JINDAL/ PRAKASH] | 50 | RM | |
| 44 | 43 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 25 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. [MAKE: TATA/ SURYA/ JINDAL/ PRAKASH] | 55 | RM | |
| 45 | 44 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. [MAKE: TATA/ SURYA/ JINDAL/ PRAKASH] | 65 | RM | |
| 46 | 45 | S&F Gunmetal, globe or gate valves 40 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. | 2 | Each | |
| 47 | 46 | S&F Gunmetal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. | 4 | Each | |
| 48 | 47 | S&F Gunmetal, globe or gate valves 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. | 9 | Each | |
| 49 | 48 | S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed. [MAKE:-SINTEX/ POLYWELL/ POLYCON/POLYPLAST] | 2 | Each | |
| 50 | 49 | S&F 20mm dia, ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min weight 210 gms) complete all as specified and directed. | 2 | Each | |
| 51 | 50 | S&F in replacement of battery 12V 17AH for 750KVA UPS, complete all as specified and directed. \n(Make : Exide Powersafe model No. SMF 12V 17AH Battery for Emergency) or Equivalent make of Amron model No. VRLA 12V 17AH and Power Patrol model No. SLA 1116 B1.) | 180 | Each | |
| 52 | 51 | S&F in replacement battery terminals brass suitable for 12V 17AH Batteries, complete all as specified and directed. \n | 360 | Each | |
| 53 | 52 | S&F in replacement of 3 core 4 sqmm copper conductor lead for connection of batteries, complete all as specified and directed. \n | 160 | RM | |
| 54 | 53 | Supply,fixing, testing & commssioning of presure motor (Booster pump) capacity 1.0 HP including proper electrical/water supply connection with suitable size of shed cover for protection of motor complete all as specified and directed. Booster motor Specification:- Product type- Centrifugal booster pump set,Brand-V Guard,Model-VB24-F4A,Power-1 HP,Pipe size (Suctionx Delivery)-2.5x2.5 cm,Pump stage-4,Type of tank-Inline Vertical,Tank Cap.(L)-24,Drawdwn Cap(L)-12,Pressure setting range-2.0 to 4.5 Kg/cm^2, Max Cap(LPH)-6000. | 2 | Each Job | |
| 55 | 54 | S&F Desert cooler having air delivery of min capacity 3500 cum per hrs, suitable for 350 sq feet area, PVC body, min water tank capacity 45 ltrs, side high efficiency plastic fan with dust filter, mosquit net, cool flow despenser, Auto lover movement , dura pump technology, single phase , 240V, 50 Hz, (Excluding elect connection) including moveble wheel, complete all as specified and directed.\nMake :- Symphony Model Sumo or equivelent in Bajaj/CG | 16 | Each | |
| 56 | 55 | S&F Integral LED Street light luminaire of 45 W, comprising of pressure die cast aluminium housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lenses, LED street light luminaires with IP 65 protection and with all fixing arangement, nuts, bolts and washer connecting to electric system with 2.5 sqmm PVC Aluminium stranded conductor 3 core of required length from light fitting to street light control box on pole, testing on completion, complete all as specified and directed. [MAKE: Wipro(Cat no. LR02-501-XXX-57-XX) or equivalent in Philips/ Crompton/Bajaj/Havells/LUKER as approved by GE.] | 18 | Each | |
| 57 | 56 | S&F Street light brackets made out of GI tubing, light grade, 32 mm bore 80cm long, bent to shape at 120 degree, fixed on pole by providing MS clamp made up of flat iron 40 x 5 mm including bolts, nuts and washer of suitable size incuding painting the bracket & clamp with two coats of aluminium paint over a coat of primer complete all as specified and directed. | 18 | Each | |
| 58 | 57 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed. | 5.3 | Cum | |
| 59 | 58 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. | 2.5 | Cum | |
| 60 | 59 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each complete all as specified and directed. | 8 | Each | |
| 61 | 60 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. | 35 | Each | |
| 62 | 61 | Taking down shutters of any description not exceeding 1 Sqm each, complete all as specified and directed. | 2 | Each | |
| 63 | 62 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed. | 2 | Each | |
| 64 | 63 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each and refixing in the same opening complete all as specified and directed. | 2 | Each | |
| 65 | 64 | Roughning of surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and directed. | 167 | Sqm | |
| 66 | 65 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles/ rubbish off the permises to a distance not exceeding 250m complete all as specified and directed. | 90 | Sqm | |
| 67 | 66 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and directed. | 15 | Sqm | |
| 68 | 67 | Taking up or down steel tubing and connections 15 mm bore, including cleaning (tubings only and not connections) complete all as specified and directed. | 30 | RM | |
| 69 | 68 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. [MAKE: TATA/ SURYA/ JINDAL/ PRAKASH] | 30 | RM | |
| 70 | 69 | Taking down cement or cement lime plaster, any description, on brick or stone walls, ceilings, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. | 600 | Sqm | |
| 71 | 70 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. | 3 | QTL | |
| 72 | 71 | Demolition of reinforced cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) (reinforcement cut as required to facilitate demolition) complete all as specified and directed. | 3.5 | Cum | |
| 73 | 72 | M&L for cutting holes in brick walls exc half brick but n exc one brick in cement mortar for incerting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete type B1, 1:2:4 as required, complete all as specified and directed. | 45 | Each | |
| 74 | 73 | M&L for cutting chase, pinning in making good to facing where required and pointing in cement mortar 1:3 as required, complete all as specified and directed. | 40 | RM | |
| 75 | 74 | S&F Steel work in tubular/structural trusses, purlins, etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 or steel sections conforming to Fe 410-W (Gde E-250) quality -A complete all as specified and directed. | 100 | Kg | |
| 76 | 75 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed. \n[MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL]\n | 30 | Sqm | |
| 77 | 76 | S&F Mild steel conforming to Fe-290 Gde E-165 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed. | 300 | Kg | |
| 78 | 77 | M&L for Second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed. | 0.8 | Cum | |
| 79 | 78 | M&L for factory made, second class hardwood 35mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed. | 30 | Sqm | |
| 80 | 79 | M&L for factory made second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (with or without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed. | 16 | Sqm | |
| 81 | 80 | Supplying, fabricating and fixing powder coated (minimum thickness 50 micron) aluminium sections of required size for door, windows, ventilators frames and shutters and partitions including aluminium hinges of required size jointing cleats, screws sash fasteners, plug for fixing with walls, columns, etc complete all as specified and directed. [MAKE: JINDAL/ AJIT INDIA/ HINDALCO] | 100 | Kg | |
| 82 | 81 | S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. | 28 | RM | |
| 83 | 82 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. | 12 | Sqm | |
| 84 | 83 | S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed. | 40 | Each | |
| 85 | 84 | S&F Butt hinges, medium weight, cold rolled mild steel, 75 mm size complete all as specified and directed. | 80 | Each | |
| 86 | 85 | S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed | 40 | Each | |
| 87 | 86 | S&F 100 mm Aluminium handles, cast type, anodised complete all as specified and directed | 50 | Each | |
| 88 | 87 | S&F 150 mm Aluminium anodised barrel Tower bolts extruded section and fixed complete all as specified and directed | 8 | Each | |
| 89 | 88 | S&F 100 mm Aluminium anodised barrel Tower bolts extruded section and fixed complete all as specified and directed | 50 | Each | |
| 90 | 89 | S&F 300mm long aluminium alloy anodised Sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed | 28 | Each | |
| 91 | 90 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. | 25 | Sqm | |
| 92 | 91 | S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as specified and directed. | 15 | Sqm | |
| 93 | 92 | S&F Figured glass, pin head type 3mm thick and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as specified and directed. | 1.5 | Sqm | |
| 94 | 93 | M&L for Brick work with fly ash bricks (Modular), straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. | 2.5 | Cum | |
| 95 | 94 | M&L for rendering 15mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. | 175 | Sqm | |
| 96 | 95 | M&L for rendering 10mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. | 198 | Sqm | |
| 97 | 96 | Supply only liquid integral water proofing chemicals complete all as specified and directed. [Make; Dr.Fixit Pidiproof LW+ of M/s Pidilite Industries or STP No. 1 (liquid) of M/s STP Ltd] | 12 | Kg | |
| 98 | 97 | M&L for Rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete all as specified and directed. | 150 | Sqm | |
| 99 | 98 | M&L for heavy duty flooring tiles, harsh weather & UV Resistance, high abrasion resistance, MOH Hardness >6, thickness 10 mm thick, area of each tile not less than 0.09 sqm, anti slip type, laid in floors, steps, edges, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed. [MAKE:-JOHNSON ENDURA or equivalent in SOMANY/ KAJARIA/ORIENT as approved by GE] | 20 | Sqm | |
| 100 | 99 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. | 1.25 | Cum | |
| 101 | 100 | M&L for Factory made, machine pressed, M-35 grade concrete interlocking paver blocks (glossy /reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 60 mm thickness with & including 50 mm thick stone dust cushion and joints filled with sand complete all as specified and directed. \n[MAKE:- MEHTAB / NAVYA TILES / SAP PAVERS/ SAGAR TILES] | 25 | Sqm | |
| 102 | 101 | M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 15mm thick screed bed in CM 1:4 complete all as specified and directed. [MAKE: SOMANY/KAJARIA /JOHNSON/ORIENT] | 166 | Sqm | |
| 103 | 102 | M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 15mm thick screed bed in CM 1:4 complete all as specified and directed. [MAKE: SOMANY/KAJARIA/ORIENT] | 16 | Sqm | |
| 104 | 103 | M&L for Glazed ceramic coloured tiles 350mm x 250mm x 7mm thick or 450mm x 350mm x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed. [MAKE: SOMANY/ KAJARIA/ ORIENT/ JOHNSON] | 65 | Sqm | |
| 105 | 104 | M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding, moulding and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. | 5 | Sqm | |
| 106 | 105 | M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed. | 30 | Sqm | |
| 107 | 106 | M&L for second class hardwood plain fillets, square, rectangular in section exc 13 sqcm but n exc 25 sqcm, clean swan, secured with nails and fixed, complete all as specified and directed. | 100 | RM | |
| 108 | 107 | M&L for 25mm thick block board grade 2 quality, interior grade, decorative type, with decorative veneer on one face commercial type fixed with screws to timber framework, complete all as specified and directed. | 20 | Sqm | |
| 109 | 108 | M&L for 9mm thick decorative laminate type 1 coloured and pattern as provided, fixed with approved adhesive as per manufacturers instructions, complete all as specified and directed. | 25 | Sqm | |
| 110 | 109 | S&F 40mm cupboard knobs fixed with nuts, screw and washer of brass, polished, complete all as specified and directed. | 40 | Each | |
| 111 | 110 | S&F magnetic catches for cupboards with plastic body and striking plate not less than 40mm including fixed in, complete all as specified and directed. | 40 | Each | |
| 112 | 111 | S&F 75mm brass handle, cast type, polished bright, complete all as specified and directed. | 40 | Each | |
| 113 | 112 | S&F 40mm wide flap, continuous piano hinges, brass, bright finish, complete all as specified and directed. | 30 | RM | |
| 114 | 113 | S&F Mild steel chromium plated, 19mm dia, minimum thickness 1mm, curtain rod with side fixing brackets, rings & decorative knobs complete all as specified and directed. | 40 | RM | |
| 115 | 114 | S&F PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete all as specified and directed. [MAKE:- Prayag (Cat No.501 Smart flush cistern) or equivalent in PARRYWARE-SLIMLINE/CERA as approved by GE] | 4 | Each | |
| 116 | 115 | S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, including CP waste coupling and 32mm dia PVC waste pipe of suitable length complete all as specified and directed. [MAKE:- Prayag (Cat No.1216 Gloss) or equivalent in NIRALI/BLUE STAR as approved by GE]\n | 4 | Each | |
| 117 | 116 | S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8328) or equivalent in JAGUAR/MARC as approved by GE] | 20 | Each | |
| 118 | 117 | S&F Chromium plated shower rose 125 mm size with swivel joints complete all as specified and directed. [MAKE:- Prayag (Cat No.BS-76) or equivalent in JAGUAR/CERA as approve by GE] | 4 | Each | |
| 119 | 118 | S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8618) or equivalent in JAGUAR/MARC as approved by GE] | 8 | Each | |
| 120 | 119 | S&F Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8606) or equivalent in JAGUAR/MARC as approved by GE] | 20 | Each | |
| 121 | 120 | S&F Tubular towel rail of aluminium anodised, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. [MAKE:- Prayag (Cat No.BA-40) or equivalent in JAQUAR/MARC as approved by GE] | 4 | Each | |
| 122 | 121 | S&F Towel ring of Chromium plated, complete all as specified and directed. [MAKE:- Prayag or equivalent in JAQUAR/MARC as approved by GE] | 4 | Each | |
| 123 | 122 | S&F Vitreous china wash basin, ISI marked, white, flat back, size 550 x 400mm, including CP waste coupling, 32mm dia PVC waste pipe of suitable length, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed. [MAKE:-SOMANY (Cat No.110107) or equivalent in CERA/PARRYWARE /HINDWARE as approved by GE.] | 4 | Each | |
| 124 | 123 | S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8602) or equivalent in JAGUAR/MARC as approve by GE] | 4 | Each | |
| 125 | 124 | S&F PVC connection 15mm dia of length not less than 600mm with both ends, cromium plated fly nut complete all as specified and directed. | 20 | Each | |
| 126 | 125 | S&F in repairs Vitreous china squatting pan ‘Orissa’ pattern, size 580 x 440 mm, white with integral foot rests including provision of cement concrete bedding & ‘P’ or ‘S’ trap complete all as specified and directed. [MAKE:-SOMANY (Cat.No.121115) or equivalent in CERA /PARRYWARE/ HINDWARE as approved by GE.] | 4 | Each | |
| 127 | 126 | S&F Bathroom cabinet of hard thermosetting plastic of size 622 x 422 mm, fitted with superior quality distortion free 4 mm thick mirror complete all as specified and directed. [Make: PRAYAG (Model No. 555) or equivalent in NEELKAMAL/ PARRYWARE.] | 4 | Each | |
| 128 | 127 | S&F PVC (SWR) floor/Nahani trap, plain with CP grating including jointing with solvent cement, dia of outlet 75 mm complete all as specified and directed. | 12 | Each | |
| 129 | 128 | S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 75 mm bore complete all as specified and directed. | 12 | RM | |
| 130 | 129 | S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 110 mm bore complete all as specified and directed. | 15 | RM | |
| 131 | 130 | S&F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed. | 20 | Each | |
| 132 | 131 | S&F PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed. | 5 | Each | |
| 133 | 132 | S&F PVC (SWR) junction single (single T), equal or unequal, 75mm bore complete all as specified and directed. | 5 | Each | |
| 134 | 133 | S&F PVC (SWR) junction single (single T), equal or unequal, 75mm bore complete all as specified and directed. | 5 | Each | |
| 135 | 134 | S&F PVC (SWR) vent cowl, 110mm bore complete all as specified and directed. | 5 | Each | |
| 136 | 135 | M&L for 5cm thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:3 or cement mortar 1:4, complete all as specified and directed. | 10 | Sqm | |
| 137 | 136 | M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed. | 2 | Cum | |
| 138 | 137 | M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. | 2.5 | Cum | |
| 139 | 138 | M&L for Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed. | 50 | Sqm | |
| 140 | 139 | M&L for preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 5 | Sqm | |
| 141 | 140 | M&L for Preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and directed. | 59 | Sqm | |
| 142 | 141 | M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed | 5 | Sqm | |
| 143 | 142 | M&L for preparation of old decorated surface of wall including brooming, down, primimg with chalk whiting and applying two coat of cement based paint complete all as specified and directed | 50 | Sqm | |
| 144 | 143 | M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over & including a coat of cement wash complete all as specified and directed. [NOTE:- 3mm thick wall care cement putty where ever required shall be measured & paid separately.] | 225 | Sqm | |
| 145 | 144 | M&L for preparatration of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. | 150 | Sqm | |
| 146 | 145 | M&L preparatration of old plastered surfaces of ceiling and applying two coat of white wash complete all as pecified and directed. | 10 | Sqm | |
| 147 | 146 | M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of putty where required, complete all as specified and as directed. \nNote : putty shall be measured and paid separately. | 175 | Sqm | |
| 148 | 147 | M&L complete removal of old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over and including one coat of white cement based putty (where it is required) complete all as specified and as directed. Note:- Putty shall be measured and paid seperately | 174 | Sqm | |
| 149 | 148 | M/& for cleaning thoroughly complete existing surface from walls & roofs and applying two coats of polymer modified cementitions based protective and water proofing coating as per manufacture instruction, complete all as specified and as directed. Make : Acrocoat or Equivalent. | 152 | Sqm | |
| 150 | 149 | M&L for Machine cut Kota stone slab flooring 20-25mm thick (size not less than 450mm x 600mm) with and including 20mm thick cement screed base in CM 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed. | 23 | Sqm | |
| 151 | 150 | Taking down existing old roof treatment of any description, type and in any position including removal of old tiles, screed, felt, etc complete all as specified and directed. | 120 | Sqm | |
| 152 | 151 | M&L for Water proofing treatment on roof surfaces with APP modified membrane with non woven polyester reinforced, weight not less than 3 KG/SQM and thickness of membrane not less than 3mm laid in following sequence complete all as specified and directed.:-\n(a) Applying 10mm thick plaster in CM 1:4 mixed with water proofing compound [Make; Dr.Fixit Pidiproof LW+ of M/s Pidilite Industries or STP No. 1 (liquid) of M/s STP Ltd] @ 3% by weight of cement on cleaned roof surface. After properly curing of the plaster, the roof will be tested for water tightening by ponding with water for seven days for any seepage/leakages, etc. If any seepage/leakage is observed the rectification will be carried out by pressure grouting under pressure of 5 Kg/sqcm using cement based grout. After the roof surface is repaired, the slab /roof will be again tested for water tightness before proceeding for further treatment.\n(b) Properly cleaning and drying of the plastered roof surfaces, parapets, gutters, drain mouths, etc for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting. Proper grooves shall be cut around CI drain outlets/pipes/chimney pipes and other similar situations to tuck in the treatment.\n(c) Applying a coat of bituminous primer conforming to IS: 3384-1965 @ 0.3Kg/Sqm on the prepared surface till the surface is properly impregnated.\n(d) Laying APP modified water proofing membrane with 100mm overlap in longitudinal direction and 100mm overlap in transverse direction sealed and bounded to the surface by torch application method.\n(e) All joints and changes in direction should be curved with cement mortar 1:3 with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. A fillet of PCC 1:2:4 type B0 using 12.5mm graded stone aggregates shall be provided at all junctions of vertical and horizontal surfaces and wherever there is change of direction. \n | 120 | Sqm | |
| 153 | 152 | M&L for grout of permanent bonding of structural damage/crack, porosity of concrete to attend leakage/seepage with pressure grouting with 15mm bore GI Pipe Nozzle under the pressure of 5 kg/sqcm using cement based grout, treatment to be made as per instruction complete all as specified and directed. | 75 | Per Nozzle | |
| 154 | 153 | S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed. | 30 | RM | |
| 155 | 154 | S&F stainless steel kitchen plate rack overall size- 31\" x 36\" x 10\" duly fixed on walls with gutties & screws of suitable length complete all as specified and directed. [MAKE:- Prayag (Cat No.P-340) or equivalent in NIRALI/BLUE STAR as approved by GE] | 4 | Each | |
| 156 | 155 | Excavating in post holes (or similar holes) each in required length, width and depth, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, and removing surplus soil to a distance n.exc 50 mtr and making good surface in soft /loose soil complete all as specified and directed. | 54 | Each | |
| 157 | 156 | M&L PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in posts holes, foundation filling and mass concrete and similar work etc complete all as specified and directed. | 10 | Cum | |
| 158 | 157 | &F Mild steel conforming to Fe-290 Gde E-165 in framed work, angle iron, flat iron, MS plates as in brackets, cleats, fastners, wind ties, supports, base for posts etc with riveted, bolted or welded attachment complete all as specified and directed. | 800 | Kg | |
| 159 | 158 | Supplied only chain link MS galvanised fencing, any size or type complete all as specified and directed. | 540 | Kg | |
| 160 | 159 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard rails, straining bolts etc including provission of binding wire, welding complete all as specified and directed. | 155 | Sqm | |
| 161 | 160 | M&L mild steel round bars 10 mm dia & over, cut to length bent to shape or welded if required as in chain link fencing complete all as specified and directed. | 330 | Kg | |
| 162 | 161 | S&F mild steel screws bolts (machine made) of required dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed and to be fitted with washers and one hexagonal or square nut, complete all as specified and directed. | 20 | Kg | |
| 163 | 162 | S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm to 80mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed. | 2 | 100 RM | |
| 164 | 163 | Taking down carefully existing meters from inside the panel box /wall along with disconnecting the incoming supply cable complete and deposit to MES store yard complete | 156 | Each | |
| 165 | 164 | M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in but including non metallic rigid PVC conduit oe size 25 mm dia ISI marked including PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and directed. | 100 | RM | |
| 166 | 165 | M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 2.5 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 1.5 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete all as specified and directed. | 200 | RM | |
| 167 | 166 | Supply and Installation of AMR Enable Single Phase LPRF Meter with the following specifications:\n• AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, basis current 10 A, Max continuous current 600% of basis current conforming to IS-13779 and relevant IEC standards with inbuilt Low Power Radio Frequency (LPRF) communication facility in 865-867 MHz Cyan Connode or equivalent Mesh network with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED/LCD based circuitry complete all as specified and directed.\n• Meter Should support the following data : 30 min instantaneous data for voltage, current, power factor, power, cumulative energy, cumulative apparent energy and frequency, 30 load survey data for energy, monthly billing survey for Cumulative Energy and Max Demand\nMake: L&T, Schnieder, Secure | 156 | Each | |
| 168 | 167 | Supply and Installation of Data Concentrator Units (DCU) / Modem with the following specifications:\n• IP 51 RATED Data Concentrator Unit (DCU) compatible for remote Automatic Meter Reading (AMR) solution and capable of communicating with the static energy Meter in the corresponding frequency band and with the data server through GPRS and shall have minimum data transfer rate of 9600 bps, internal memory to store data of 50 modules and shall be based on CyanConnode or equivalent Mesh network range not less than 50 meter complete all as specified and directed.\nMake: L&T, Schnieder, Secure | 5 | Each | |
| 169 | 168 | Supply and Installation of IP 51 rated LPRF Repeater units with the following specifications:\nRepeater unit with inbuilt Low Power Radio Frequency (LPRF) Communication Facility and capable of communicating within 965-867 corressponding Mesh network with inbuilt AC power supply. A Single Phase LPRF Meter would be usable as LPRF Repeater as well complete all as specified and directed..\nMake: L&T, Schnieder, Secure | 3 | Each | |
| 170 | 169 | Supply and Installation of Hosting and Configuration of the Cloud Hosted Web based Software with following modules:\n(i) Meter Data Management Module\nThe meter data management module would be responsible for collecting the data from the concentrator and make the data available to the billing system. The meter data management system would capture and provide the following data:\n(a) 30 min instantaneous data from all the meters for seven parameters – Cumulative Energy, Cumulative Apparent Energy, Power, Current, Voltage, Power Factor and Frequency\n(b) Monthly and quarterly billing survey data for cumulative energy and max demand\n(ii) Billing Module\nThe billing module would collect the data from the meter data management module, calculate the energy consumption, calculate billing determinant and make energy data / billing data available to admin and end users.\nThe system would support occupation / vacation and billing reports.\nthe software would be collecting data from DCU. The software would provide excess to staff as well as the occupant for the data both on web and mobile apps.\nMake: Innologix, SAP, Oracle | 156 | Each | |
| 171 | 170 | ITEM FOR PHASE II WORK\nAMC against item No 166.00 to 169.00 for meter and complete software including GPRS charges complete all as specified and directed.\nNote :- AMC shall be for four year after two years of defect liability including warranty from project commissioning. | 624 | Each Meter Per Year | |
| 172 | 176 | Deduct schedule of credit (calculation will be done off line) Rs. 46195.00 |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
