| 1 | 1 | Electrical Items. | | | |
|---|
| 2 | 1.01 | Switch piano type, 5 Amp conform to IS 1293. \nMake : Anchor/Crabtree/Havells ISI Marked. | item1 | 1133 | Nos |
|---|
| 3 | 1.02 | Incoming MCCB 415 volt, 25 KA, 4 pole, 200 Amp capacity . Make: Havells /HPL /Legrand. | item2 | 2 | Nos |
|---|
| 4 | 1.03 | MCB 20 Amp SP, 240 volt, 10 KA conform to IEC-60898(2002) and IS 8828(1996). Make : Havells/Legrand/HPL ISI Marked. | item3 | 27 | Nos |
|---|
| 5 | 1.04 | Incoming MCCB 415 volt, 16 KA, 4 pole, 63 Amp capacity . \nMake: Havells /HPL /Legrand | item4 | 5 | Nos |
|---|
| 6 | 1.05 | PVC switch board 10” x 12” conform to IS 14772. ISI Marked. | item5 | 144 | Nos |
|---|
| 7 | 1.06 | LED lamp 10 Watt. Make : Havells/Bajaj/Surya ISI Marked | item6 | 145 | Nos |
|---|
| 8 | 1.07 | MCB DB 12 Way SPN, 240V Make : Havvels/Legrand/HPL | item7 | 1 | Nos |
|---|
| 9 | 1.08 | Insulation tape 19mm width, 25 Mtr long Make : Steel grip/Anchor/ISI Marked | item8 | 335 | Nos |
|---|
| 10 | 2 | Furniture Items. | | | |
|---|
| 11 | 2.01 | Chair Writing. Chair writing with hand rest. The seat and back rest will be 15 mm thick prelaminated particle baord. One side veneered and other side plain. Lipping will be provided all around of seat and back rest. The seat, back & hand rest will be fixed with frame. all wooden surface will french polised. the legs will be fixed with PVC shoe hard . SKETCH \"A\" | item9 | 5 | Nos |
|---|
| 12 | 2.02 | Steel Table (Type-III). Table of size 900 x 610 x 760mm. Table top shall be 19mm thick particle board pre laminated decorated sheet fixed with hollow sec frame with screw @ 200mm C/C. The frame work of the table shall be of MS hollow section of size 25mm x 25mm all as per drg. Ends of legs will be sealed with MS sheet 1.60mm thick with proper welding process to avoid entry of dust of earth. All steel surfaces will be spray painted over a coat of red oxide. The legs will be fitted with PVC shoe hard. Make- Godrej/Usha/Durian or equivalent . SKETCH \"B\" | item10 | 2 | Nos |
|---|
| 13 | 2.03 | Writing Table. Table of size 900 x 610 x 760 mm shall be provided. Table top shall be 19 mm thick particale board prelaminated decorated sheet fixed with hollow section frame with screw @ 200 mm c/c. The frame work of table shall be of MS hollow section of size 25 x 25 mm all as per drg. end of legs will be sealed with MS sheet 1.6 mm thick with proper weelding process to avoid the dust entry. All steel surface will have two coats of synthetic enamel paint over a coat of red oxide primer. The legs will be fitted with PVC shoe hard. SKETCH \"C\" | item11 | 2 | Nos |
|---|
| 14 | 2.04 | Hand Held Trolley As per Sketch \"D\" | item12 | 17 | Nos |
|---|
| 15 | 2.05 | Visitor Chair. Chair writing shall be provided as per approval. Make : Godrej/Usha/Durain or equivalent.SKETCH \"E\" | item13 | 14 | Nos |
|---|
| 16 | 2.06 | Storage Rack. Storage racks of size 2000x600x1800mm made of pre- fabricated mild steel structure of MS angle of size 50 x 50 x 6mm. These are provided with 1.25 mm thick MS sheet. It will be spray painted internally and externally with Olive green over a coat of redoxide primer. Four Nos racks will be welded to the vertical members. SKETCH \"F\" | item14 | 8 | Nos |
|---|
| 17 | 2.07 | Steel Almirah. Steel almirah of size 1985mm x 1300mm x 485mm with 20 guage 03 shelves. Middle shelvs will have 20mm aluminium conduit pipe 1.6mm thickness with socket for hanging clothes will be provided as per drawing. SKETCH \"G\" | item15 | 1 | Nos |
|---|
| 18 | 3 | Plumbing Items. | | | |
|---|
| 19 | 3.01 | PVC Connection Pipe 450mm longwith both side of neat of size 15mm diameter suitable for Geyser. ISI Marked. | item16 | 135 | Nos |
|---|
| 20 | 3.02 | PTMT bib cock fency 20 mm diameter (Old handle with flange). Prayag Cat Part No 124 -0 Make :Prayag/Supreme/Astral | item17 | 15 | Nos |
|---|
| 21 | 3.03 | PTMT push Cock with flange 15 mm diameter. Prayag Cat Part No 138 Make :Prayag/Supreme/Astral | item18 | 37 | Nos |
|---|
| 22 | 3.04 | CP 20 mm stop Cock Make :Parryware/Hindware/Jaguar | item19 | 19 | Nos |
|---|
| 23 | 3.05 | PVC SWR tee 110mm Make : Supreme/Finolex/Prince | item20 | 70 | Nos |
|---|
| 24 | 4 | Misc Items. | | | |
|---|
| 25 | 4.01 | CI Cover for earthing arrangement 300 x 300mm with frame | item21 | 59 | Nos |
|---|
| 26 | 4.02 | Galavanised steel earth plate 600 x 600mm x 6mm thick with two hole on it. | item22 | 59 | Nos |
|---|
| 27 | 4.03 | Common Salt | item23 | 3750 | Kgs |
|---|
| 28 | 4.04 | Charcoal dust | item24 | 3750 | Kgs |
|---|
| 29 | 4.05 | PVC door of size 1000mm x 2100mm factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes 19 gauge thickness and size 19mm x 19mm styles and 15mm x 15mm for top and bottom rails. MS frame shall be covered with 5m thick heat moulded plain colour PVC 'C' channel of size 30mm x 50mm forming styles and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet strip as gap insert for top rail and bottom rail. Panelling of 5mm thick plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with 30mm wide and 5mm thick PVC sheet beading on either side and joined together with solvent cement. An additional 5m thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' channel using PVC solvent cement adhesive, supplying and fixing in the frame at site as per specification complete with frame of size 50mm x 47mm made out of 5mm thick PVC plain colour sheet reinforced with MS square tube 19mm x 19mm of 19 gauge and fastener as per IS specification, two handle of 150mm, two tower bolt of 150mm (All fittings of aluminium anodized (ISI marked) and three MS hinges of 100mm. Make : Rajshri/Sintex/Madan aluminium & decoration Ludhiana/Poly moulds Kanpur/Gaziabad plasti - wood industries Gaziabad.\nNote :- The door frame will be 150 mm embedded in floor. Hence the height of the frame 2250 mm (2100 + 150 = 2250mm). As per Sketch \"H\" | item25 | 85 | Nos |
|---|
| 30 | 4.06 | Factory made solid panel pvc skelton door shutter with stainless steel Mosquito proofing wire cloth Single leaf of size 1200 x 2100 mm 30mm thick consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; wire gauzed i.e. panel will be of wire gauze in lieu of single side Prelam PVC sheet panels The wire gauge shall be wrapped on an additional square 8mm M.S. Solid tube & hits tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly door frame shall be existing pressed steel frame 95 x 55 x 1.5 mm thick. opening as per specification & drawing. The door having the following fittings. (a) 04 Nos of 100 mm stainless steel but hinges (b) Two Nos of 150 mm aluminium handles (c) Two nos of heavy duty door stoper. (d) Two nos aluminium 150 mm tower bolt. Make : Rajshri/Sintex/Madan aluminium & decoration Ludhiana/Poly moulds Kanpur/Gaziabad plasti - wood industries Gaziabad or equivalant. As per Sketch \"J,J1,J2\" | item26 | 62 | Nos |
|---|
| 31 | 4.07 | Aluminium door of size 1.0 x 2.1 m made out of Al Frame section of fixed with 4mm thick glass pane. Al door shall have 01 no. door closer. The door shutter shall be fixed with the door frame with 3 nos SS hinges 100mm length. The door shall be provided with 1nos locking arrangement and two nos, 150mm long handles. Sketch 'K' | item27 | 3 | Nos |
|---|
| 32 | 4.08 | Looking Mirror of size 2500x600mm mounting on 6 mm thick plywood with necessary accessories for fixing.(Make : Saint Gobain/Audi/Modiguard /Atul/Prince). | item28 | 8 | Nos |
|---|
| 33 | 4.09 | Self driven power screw 100mm long inbuilt rubber washer and GI washer, Make : HP or Equivalent | item29 | 2000 | Nos |
|---|
| 34 | 4.1 | Self driven power screw 25mm long inbuilt rubber washer and GI washer, Make : HP or Equivalent | item30 | 2200 | Nos |
|---|
| 35 | 4.11 | Self driven power screw 35mm long inbuilt rubber washer and GI washer, Make : HP or Equivalent | item31 | 1800 | Nos |
|---|
| 36 | 4.12 | Self driven power screw 50mm long inbuilt rubber washer and GI washer, Make : HP or Equivalent | item32 | 1950 | Nos |
|---|
| 37 | 4.13 | Self driven power screw 75mm long inbuilt rubber washer and GI washer, Make : HP or Equivalent | item33 | 2600 | Nos |
|---|
| 38 | 4.14 | 25mm long , 6mm dia nut and bolt with washer with rubber washer, Make : HP or Equivalent | item34 | 16 | Nos |
|---|
| 39 | 4.15 | 50mm long , 6mm dia nut and bolt with washer with rubber washer, Make : HP or Equivalent | item35 | 16 | Nos |
|---|
| 40 | 4.16 | Aluminium Window of size 1000 x 1500mm, anodised as window will be consisting double shutter one of glazed and second of mosquito proof mesh (two leaf for glazed and two leaf for wire mesh side open able side hunging). The window frame will be 102 x 45 x 2.10mm end on vertical member of size 55 x 45 x 2mm will be fitted in the middle of window (parallel to the hiegt). Window shutter will be side open able and shutter member size will be 50 x 45 x 2mm. Two shutter for glaze and two shutter for stainless steel mosquito wire cloth incl all necessary fitting joinery cleats glazing packing, aluminium snap beading etc. The middle partition rail factory fitted with leg proof rubber gasket. Make of aluminium section Hindalco/Nalco/Jindal. SKETCH \"L\" | item36 | 37 | Nos |
|---|
| 41 | 4.17 | Window chajjaSize 1200 mm made out of PPGL sheet 0.63mm thick, with adequate slope to drain rain water. | item37 | 67 | Nos |
|---|
| 42 | 4.18 | Full threaded screw 1 1/2\" | item38 | 11 | Pkt |
|---|
| 43 | 5 | FD Water Supply Scheme | | | |
|---|
| 44 | 5.01 | Plug Short 20mm Make : Kitec | item39 | 10 | Nos |
|---|
| 45 | 5.02 | Plug Short 25mm Make : Kitec | item40 | 10 | Nos |
|---|
| 46 | 5.03 | Composite multi-layer male threaded connector 16 mm. Make : KiTEC | item41 | 20 | Nos |
|---|
| 47 | 6 | 30 KVA Genr Set Spare Parts. | | | |
|---|
| 48 | 6.01 | Fuel filter element primary for 30 KVA Make : Kirloskar | item42 | 82 | Nos |
|---|
| 49 | 6.02 | Fuel filter element secondary for 30 KVA Make : Kirloskar | item43 | 82 | Nos |
|---|
| 50 | 6.03 | Fuel flexible pipe for 30 KVA Make : Kirloskar | item44 | 44 | Nos |
|---|
| 51 | 6.04 | Fan Belt for 30 KVA Make : Kirloskar | item45 | 49 | Nos |
|---|
| 52 | 6.05 | Fuses for 30 KVA Make : Kirloskar | item46 | 22 | Set |
|---|
| 53 | 6.06 | Extension board 3 pin x 15Amp Sockets Make: Havells | item47 | 13 | Nos |
|---|
| 54 | 6.07 | Electrolyte mixed distilled water | item48 | 270 | Ltrs |
|---|
| 55 | 6.08 | MCB 63Amp 4 pole 415 conforming to IS8628-1996 Make: Havells | item49 | 28 | Nos |
|---|
| 56 | 7 | 15 KVA Genr Set Spare Parts. | | | |
|---|
| 57 | 7.01 | Fuel filter element primary for 15 KVA Make : Kirloskar | item50 | 4 | Nos |
|---|
| 58 | 7.02 | Fuel filter element secondary for 15 KVA Make : Kirloskar | item51 | 4 | Nos |
|---|
| 59 | 7.03 | Fuel flexible pipe for 15 KVA Make : Kirloskar | item52 | 3 | Nos |
|---|
| 60 | 7.04 | Oil Filter for 15 KVA Make : Kirloskar | item53 | 8 | Nos |
|---|
| 61 | 7.05 | Fan Belt for 15 KVA Make : Kirloskar | item54 | 2 | Nos |
|---|
| 62 | 7.06 | Fuses for 15 KVA Make : Kirloskar | item55 | 1 | Set |
|---|
| 63 | 8 | 5 KVA Genr Set Spare Parts. | | | |
|---|
| 64 | 8.01 | Fuel flexible pipe for 5 KVA Make : Kirloskar | item56 | 8 | Nos |
|---|
| 65 | 8.02 | Fan Belt for 5 KVA Make : Kirloskar | item57 | 8 | Nos |
|---|
| 66 | 9 | 63 KVA Genr Set Spare Parts. | | | |
|---|
| 67 | 9.01 | Fuel filter element secondary for 63 KVA Make : Kirloskar | item58 | 10 | Nos |
|---|
| 68 | 9.02 | Fuel flexible pipe for 63 KVA Make : Kirloskar | item59 | 15 | Nos |
|---|
| 69 | 9.03 | Oil Filter for 63 KVA Make : Kirloskar | item60 | 18 | Nos |
|---|
| 70 | 9.04 | Fan Belt for 63 KVA Make : Kirloskar | item61 | 12 | Nos |
|---|
| 71 | 9.05 | Fuses for 63 KVA Make : Kirloskar | item62 | 5 | Set |
|---|
| 72 | 9.06 | Aluminium Lugs 120 Sqmm. Make – Dowells/Asian. | item63 | 10 | Nos |
|---|
| 73 | 9.07 | Aluminium Lugs 35 Sqmm. Make – Dowells/Asian | item64 | 10 | Nos |
|---|
| 74 | 9.08 | Aluminium Lugs 16 Sqmm. Make – Dowells/Asian. | item65 | 30 | Nos |
|---|
| 75 | 9.09 | Aluminium Lugs 10 Sqmm. Make – Dowells/Asian. | item66 | 50 | Nos |
|---|
