Special Repair Of Kartarpur Jande Sarai Road ( 18 Feet Wide Designed Roads ) Including 5 Year Routine Maintenance , Under Special Repair Programme 2020-21 ( Phase-3 ) Of Link Roads , M . C . Jalandhar City In Distt . Jalandhar
Tender Overview
Project Description
Special Repair Of Kartarpur Jande Sarai Road ( 18 Feet Wide Designed Roads ) Including 5 Year Routine Maintenance , Under Special Repair Programme 2020-21 ( Phase-3 ) Of Link Roads , M . C . Jalandhar City In Distt . Jalandhar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Jan-2021 | Corrigendum No.01 dated 18.01.2021 | Date | 21-Jan-2021 |
| 2 | 21-Jan-2021 | Corrigendum No.02 dated 21.01.2021 | Date | 27-Jan-2021 |
| 3 | 27-Jan-2021 | Corrigendum No.03 Dated 27.01.2021 | Date | 04-Feb-2021 |
BOQ
| Name of Work: Speical Repair of KARTARPUR TO JANDE SARAI ROAD (18' wide designed road) including 5 years routine maintenance, under SPECIAL REPAIR PROGRAM FOR YEAR 2020-21 (PHASE-3) of link roads, falling in MC JALANDHAR CITY in Distt. JALANDHAR | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | PART-I REPAIR WORK\n Dismantling of Stone Soling Dry | BI01010001010000000000000515BI0100001113 | 891 | Cum |
| 2 | 2 | Compaction of earth work & Preparation of sub grade including loosening, leveling of earth 225mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 300-2 as per Technical clause 305 of MORT&H specifications. | BI01010001010000000000000515BI0100001114 | 5414.86 | Sqm |
| 3 | 3 | Relaying of recovered material from dismantling of road crust as granular sub-base by spreading in uniform layers with motor grader on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per MORD technical specifications | BI01010001010000000000000515BI0100001115 | 534.6 | Cum |
| 4 | 4 | Construction of granular sub-base by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORD technical specifications | BI01010001010000000000000515BI0100001116 | 260.37 | Cum |
| 5 | 5 | Providing and laying of New Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr including dismentalling old brick on end edging & credit of old material complete as per Punjab PWD specifications. | BI01010001010000000000000515BI0100001117 | 2014 | Rmt |
| 6 | 6 | Making 50 mm x 50 mm furrows \nMaking 50 mm x 50 mm furrows 45 degree to the centre line of road and at one metre interval in the existing bituminous wearing coarse including sweeping and disposal of excavated material within 1000 meters lead complete as per technical clause 404 of MORT&H specifications (Full surface area will be measured for payment.) | BI01010001010000000000000515BI0100001118 | 1578.5 | sqm |
| 7 | 7 | Water Bound Macadam Grading I\nProviding, laying, spreading and compacting stone aggregates of Grading I to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming Water Bound Macadam Grading I , watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications \nwithout screening | BI01010001010000000000000515BI0100001119 | 596.23 | Cum |
| 8 | 8 | Water Bound Macadam Grading II\nProviding, laying, spreading and compacting stone aggregates of Grading II to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying an brooming Water Bound Macadam Grading II, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications\nwithout screening | BI01010001010000000000000515BI0100001120 | 501.15 | Cum |
| 9 | 9 | Surface dressing\nProviding and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 509 of MORT&H specifications. | BI01010001010000000000000515BI0100001121 | 5553.36 | Sqm |
| 10 | 10 | Tack coat with Bitumen VG-10 Bulk\nProviding and applying tack coat with penetration grade bitumen VG- 10 using bitumen pressure distributor @ of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of MORT&H specifications | BI01010001010000000000000515BI0100001122 | 63321.5 | sqm |
| 11 | 11 | Providing and laying patch work with bituminous macadam 50mm to 75mm thick using crushed stone aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% in continuous type hot mix plant, laid after trimming the pot hole, removal of failed material, laying by suitable means and rolling with a smooth wheeled roller to match the adjoining surface complete as per technical clause 504 of MORT & H specifications NOTES : -\n(i) The actual volume of the aggregate to be paid for shall be computed after deducting the specified percentage from the volume computed by stacks measurements as per MORT&H specifications (addendum to latest revision) for the purpose of secure advance.\n(ii) The final grading for the aggregates required for dense bituminous macadam course grading 2 for 75mm/50mm thickness of each layer conforming to table 500-7 of MORT & H specifications (addendum to latest revision) shall be determined after getting the bituminous macadam grading-2 designed from Punjab PWD, B&R Research Laboratory Patiala after obtaining 60 % of material. The design mix so finally approved shall be termed as the approved mix. The aggregates shall be hydrophobic and of low porosity. The aggregates shall satisfy the physical requirement set fourth in table 500-6 (addendum to latest revision). (iii) The mix shall exhibit the following details \n(a) Binder expressed as percentage by weight of total mix.\n(b) Course aggregate of 26.5mm gauge expressed as percentage by weight of total mix.\n(c) Crushed bajri of 11.2mm size expressed as percentage by weight of total mix.\n(d) Fine aggregate 4.75mm below expressed as percentage by weight of total mix\n(e) A single definite percentage passing each sieve for mixed aggregates.\n(f) Density of bituminous macadam (75mm/50mm thick) after compaction shallminimum 2.2gms/cc & nothing extra shall be payable if higher density is achieved at site (iv) The contractor thereafter shall be required to complete the supply of various ingradients of bituminious macadam as per proportions stipulated in the approved mix. (v) The rate of B M shall be quoted by the contractor with respect to binder contentpercentage by weight of mix being 3.4%. If labortary designs a mix with different percentage then the difference shall be payable / recoverable | BI01010001010000000000000515BI0100001123 | 56.93 | Cum |
| 12 | 12 | Providing and laying Bituminous Concrete 30mm to 45mm thick ( Grading-II ) with Continuous type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4%, laying with a Paver Finisher Mechanical to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of MORT&H specifications NOTES : -\n(i) Job mix formula for the bituminous concrete shall be provided by the agency and shall be got approved from Punjab PWD, B&R Research Laboratory Patiala before adoption at site for execution.\n(ii) The specification of this item for analytic purpose is kept with bitumen content @ 5.4% weight of mix variation as compared with job mix formula shall be paid / deducted accordingly. The limits of variation shall be worked out with the approved formula. TECHNICAL NOTE : -\ni.) Apart from the confirmity with the grading and quantity requirement of invidual ingredients exhibited above the mix aggregate i.e.coarse and fine aggregate for bituminous concrete shall meet all requirements set forth clause 507 of MORT & H specifications.\nii) The final grading for the aggregates required for bituminous concrete confirming to table 500.17 of MORT & H specifications shall be determined after getting the bituminous concrete designed from Punjab PWD, B&R Research Laboratory Patiala after obtaining 60 % of material. The design mix so finally approved shall be termed as the approved mix. The aggregates shall be hydrophobic and of low porosity. The aggregates shall satisfy the physical requirement set fourth in table 500-6 (addendum to latest revision).\niii) The approved mix shall exhibit the following details, source and location of all material: -\n(a) Binder expressed as percentage by weight of total mix.\n(b) Course expressed as percentage by weight of total mix.\n(c) Crushed bajri expressed as percentage by weight of total mix.\n(d) Fine aggregate expressed as percentage by weight of total mix\n(e) A single definite percentage passing each sieve for mixed aggregates.\n(f) Density of bituminous concrete after compaction will be not less than 2.35 gm/CC. | BI01010001010000000000000515BI0100001124 | 1891.11 | Cum |
| 13 | 13 | Providing and making rumble strips 15-20mm high at centre, 250mm wide placed at 1m centre to centre over freshly laid bituminous layer by using close graded premix surfacing material type B at locations to control speed and marked with 100mm wide white strips of thermoplastic road marking paint. The close graded premix surfacing material type B shall conform to technical clause 512 and thermoplastic road marking paint shall conform to technical clause 803 to MORT&H specifications | BI01010001010000000000000515BI0100001125 | 330 | Mtr |
| 14 | 14 | Road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 0.25kg per sqm area as per IRC:35 1997 complete as per technical clause 803 of MORT&H specifications | BI01010001010000000000000515BI0100001126 | 432 | Sqm |
| 15 | 15 | Constn. of 1-1/2' dia Hume Pipe Culvert as per Standed design | BI01010001010000000000000515BI0100001127 | 1 | Each |
| 16 | 16 | Construction of Berms along CC Road & in Built up area with Earth obtained from re-construction of road with all leads & lifts including watering & rooling with road roller as per MORT & H specifications | BI01010001010000000000000515BI0100001128 | 165 | cum |
| 17 | 17 | Earth work excavation in ordinary soil, exclusive of compensation of earth:- Kassi work undressed involving an average horizontal throw up to 2.0 metres and an average vertical lift up to 0.5 metres including breaking of clods. | BI01010001010000000000000515BI0100001129 | 3210 | cum |
| 18 | 18 | Kilo Meter Stone( Ordinary on Vill. Roads)\nProviding & fixing of Reinforced cement concrete M-15 grade ordinary kilometre stone of standard design for village roads as per IRC 8-1980 fixing in position including painting and printing etc.\ncomplete as per technical clause 804 of MORT&H specifications | BI01010001010000000000000515BI0100001130 | 7 | Each |
| 19 | 19 | Boundary Piller (on Village Roads)\nProviding & fixing of Reinforced cement concrete M-15 grade boundary pillars of standard design as per IRC 25-1967 fixing in position including painting and printing etc. complete as per technical clause 806 of MORT&H specifications | BI01010001010000000000000515BI0100001131 | 68 | Each |
| 20 | 20 | Village Board\nProviding & fixing of Reinforced cement concrete M-15 grade village board of standard design fixing in position including painting and printing etc. complete as per PWD/MORT&H specifications | BI01010001010000000000000515BI0100001132 | 7 | Each |
| 21 | 21 | Place Identification sign board 900x600mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 – 09 and as per IRC 67 – 2012 fixed over 4mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 | BI01010001010000000000000515BI0100001133 | 2 | Each |
| 22 | 22 | Providing and Fixing of Cautionary Sign Board 600mmx600mmx600mm Triangular as per IRC 67-2012 with high intensity microprismatic grade Retro Reflective sheeting type-XI as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 3mm thick aluminium composite material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloy reiverts. @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a mild steel angle iron post 65x65x6mm including cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORT&H specifications. A 10 years per-qualification warranty as per clause 6.9 of IRC 67-2012 for Type XI Retro reflective sheeting from the manufacture & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 including 3 years outdoor weather exposure report for the retro reflective sheeting offered shall be submitted | BI01010001010000000000000515BI0100001134 | 6 | Each |
| 23 | 23 | Mandatory sign board 600mm circular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 – 09 and as per IRC 67 – 2012. Fixed over 3mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67 2012 . | BI01010001010000000000000515BI0100001135 | 6 | Each |
| 24 | 24 | Providing & Fixing Definition Plate 600 x 200mm rectangular as per IRC 67-2001 with retroreflective high intensity microprismatic grade sheeting fixed over 2mm thick aluminium sheet welded with vertical post of sign board complete as per technical clause801of MORT&H specifications | BI01010001010000000000000515BI0100001136 | 12 | Each |
| 25 | 25 | Videography of Proposed/Execute site of work of Link Roads before & after completion of work two times (stilling & video Job Work) | BI01010001010000000000000515BI0100001137 | 1 | Job |
| 26 | 26 | Add extra cost of Cutlural Cess on Item No.1 to 25\n @ 1% on Total cost as items mentioned above on Rs | BI01010001010000000000000515BI0100001138 | 2.28486e+07 | Percentage |
| 27 | 27 | PART-II Routine Maintenance work\nRoutine maintenance for\n1st Year after completion | BI01010001010000000000000515BI0100001139 | 11.25 | Cost per km of 18' wide road |
| 28 | 28 | Routine maintenance for\n2nd Year after completion | BI01010001010000000000000515BI0100001140 | 11.25 | Cost per km of 18' wide road |
| 29 | 29 | Routine maintenance for\n3rd Year after completion | BI01010001010000000000000515BI0100001141 | 11.25 | Cost per km of 18' wide road |
| 30 | 30 | Routine maintenance for\n4th Year after completion | BI01010001010000000000000515BI0100001142 | 11.25 | Cost per km of 18' wide road |
| 31 | 31 | Routine maintenance for\n5th Year after completion | BI01010001010000000000000515BI0100001143 | 11.25 | Cost per km of 18' wide road |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender