Construction Of Toilet Block For Boys Hostel At Ekalabya Modal Residential School At Nagrakata Jalpaiguri Ground And 1St Floor Two Unit
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Jan 2021
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
NAGRAKATA → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Toilet Block For Boys Hostel At Ekalabya Modal Residential School At Nagrakata Jalpaiguri Ground And 1St Floor Two Unit
BOQ
| Name of Work: Construction of Toilet Block for Boy's hostel at Eklavya Model Residential School,Nagrakata,Jalpaiguri. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.\n(a) Depth of excavation not exceeding 1,500 mm. | BI01010001010000000000000515BI0100001112 | 61.05 | Cum. |
| 2 | 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (a) With earth obtained from excavation of foundation | BI01010001010000000000000515BI0100001113 | 12.21 | Cum. |
| 3 | 3 | (A) Filling in foundation or plinth by silver sand in\nlayers not exceeding 150 mm as directed and\nconsolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. | BI01010001010000000000000515BI0100001114 | 16.54 | Cum. |
| 4 | 4.1 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. | BI01010001010000000000000515BI0100001115 | 84.8 | Sqm. |
| 5 | 4.2 | (II) Cement concrete with 30 mm down graded shingles excluding shuttering.\nN.B. Variety\nIn ground floor\n(a) 1:3:6 proportion | BI01010001010000000000000515BI0100001116 | 6.36 | Cum. |
| 6 | 5.1 | Brick work with 1st class bricks in cement mortar (1:6)\n(a) In foundation and plinth | BI01010001010000000000000515BI0100001117 | 5.11 | Cum. |
| 7 | 5.2 | 7. 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor | BI01010001010000000000000515BI0100001118 | 113.93 | Sqm. |
| 8 | 6 | Floor Qnti Same Gr. Floor | 113.93 | Sqm. | |
| 9 | 7 | 8. Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor\nas per relevant IS codes. (ii ) River Bazree | BI01010001010000000000000515BI0100001119 | 29.27 | Cum. |
| 10 | 8 | 1st Floor | 13.97 | Cum. | |
| 11 | 9 | 9. Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (i) Tor steel/Mild Steel II. JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL\nGround Floor | BI01010001010000000000000515BI0100001120 | 4.6 | M.T. |
| 12 | 10 | 1st Floor | 1.92 | M.T. | |
| 13 | 11 | 10. Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation | BI01010001010000000000000515BI0100001121 | 44.03 | Sqm. |
| 14 | 12 | (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. | BI01010001010000000000000515BI0100001122 | 145.7 | Cum. |
| 15 | 13 | 1st. Floor | 145.7 | Sqm. | |
| 16 | 14 | 11. Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,\nscaffolding/staging where necessary | BI01010001010000000000000515BI0100001123 | 100.96 | Cum. |
| 17 | 15 | (ii) With 1:4 cement mortar\n(b) 15 mm thick plaster | BI01010001010000000000000515BI0100001124 | 102.43 | Cum. |
| 18 | 16 | (a) 20 mm thick plaster\n1st. Floor | BI01010001010000000000000515BI0100001125 | 219.89 | Cum. |
| 19 | 17 | 1st Floor , Same Ground Floor Area | 219.89 | Sqm. | |
| 20 | 18 | iii) with 4:1 cement mortar. \n10mm thick plaster. | 74.53 | Sqm. | |
| 21 | 19 | 1st Floor , Same Ground Floor Area | BI01010001010000000000000515BI0100001126 | 74.53 | Sqm. |
| 22 | 20 | 12. Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge (a) With Makrana plain pink / Adranga Pink / Garbh Gulabi/ Udaypur pink / Udaypur Green / Black Bhaslana (ii) Area of each Slab/tile exceeding 0.3 sq.m. but not exceeding 0.6 sq.m. | BI01010001010000000000000515BI0100001127 | 37.58 | Sqm. |
| 23 | 21 | 1st Floor , Same Ground Floor Area | 37.58 | Sqm. | |
| 24 | 22 | 13. Supplying, fitting, fixing marble slab/tiles, 15 mm. to 18 mm. thick in dado / wall in 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks applying white cement slurry @ 4.4 kg/ sq.m at the back side of marble & pointing in cement mortar (1:2) (1 cement, 2 marble dust) with admixture of pigment matching the stone shades including polishing all complete as per direction of the Engineer-in-charge including cost of materials, labours, scaffolding, staging, curing complete. (a) With Makrana plain pink / Adranga Pink / Garbh Gulabi / Udaypur Pink / Udaypur green / Black Bhalsana | BI01010001010000000000000515BI0100001128 | 1 | s |
| 25 | 23 | (ii) Area of each slab/tile exceeding 0.3sq.m. but not | BI01010001010000000000000515BI0100001129 | 10.94 | Sqm. |
| 26 | 24 | 1st. Floor | BI01010001010000000000000515BI0100001130 | 10.94 | Sqm. |
| 27 | 25 | 14. Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. | BI01010001010000000000000515BI0100001131 | 1 | Cum. |
| 28 | 26 | (B) Wall\n(b) Area of each tile above 0.09 Sq.m | BI01010001010000000000000515BI0100001132 | 131.22 | Each |
| 29 | 27 | 1st. Floor | BI01010001010000000000000515BI0100001133 | 131.22 | Sqm. |
| 30 | 28 | 15. Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. | BI01010001010000000000000515BI0100001134 | 60 | Sqm. |
| 31 | 29 | 16. Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from\nrolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if\nrequired, fixing lugs in cement concrete ( 1:2:4) with stone chips 20mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. | BI01010001010000000000000515BI0100001135 | 7.92 | Sqm. |
| 32 | 30 | 1st. Floor | BI01010001010000000000000515BI0100001136 | 7.92 | Sqm. |
| 33 | 31 | 17. PVC 26 Door Shutter-37 mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid\nplastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner | BI01010001010000000000000515BI0100001137 | 13.43 | Sqm. |
| 34 | 32 | 1st. Floor | BI01010001010000000000000515BI0100001138 | 13.43 | Kg./MT |
| 35 | 33 | 18. Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of\nhorizontal and vertical member and joined them by heat welding. Entire door frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. An additional 5mm thick PVC sheet with desired colour/shade (a) Plain Colour | BI01010001010000000000000515BI0100001139 | 44.85 | Sqm. |
| 36 | 34 | 1st. Floor | BI01010001010000000000000515BI0100001140 | 44.85 | Sqm. |
| 37 | 35 | 19. Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) | BI01010001010000000000000515BI0100001141 | 256.64 | Sqm. |
| 38 | 36 | 1st. Floor | BI01010001010000000000000515BI0100001142 | 256.64 | Sqm. |
| 39 | 37 | 20. Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.\nIn Ground Floor:\n(a) One Coat | BI01010001010000000000000515BI0100001143 | 138.74 | Sqm. |
| 40 | 38 | 1st. Floor | BI01010001010000000000000515BI0100001144 | 138.74 | Mtr. |
| 41 | 39 | 21. Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. b) Premium 100% Acrylic Emulsion | BI01010001010000000000000515BI0100001145 | 138.74 | Sqm. |
| 42 | 40 | 1st. Floor | BI01010001010000000000000515BI0100001146 | 138.74 | Sqm. |
| 43 | 41 | 22. Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (v) 75mm. X 60mm. X 3.15mm. | BI01010001010000000000000515BI0100001147 | 27 | Cum. |
| 44 | 42 | 23. Iron socket bolt of approved quality fitted and fixed complete. (c) 150mm long x 10mm dia bolt | BI01010001010000000000000515BI0100001148 | 18 | Sqm. |
| 45 | 43 | 24. Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:\n(a) With continuous plate base (Hexagonal/ Round rod) (i) 75 mm grip x 10 mm dia rod. | BI01010001010000000000000515BI0100001149 | 18 | Sqm. |
| 46 | 44 | 25. (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground\nfloor.\n(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. | BI01010001010000000000000515BI0100001150 | 1.27 | qtl |
| 47 | 45 | 26. a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | BI01010001010000000000000515BI0100001151 | 7.92 | Sqm. |
| 48 | 46 | 27. (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary | BI01010001010000000000000515BI0100001152 | 7.92 | Sqm. |
| 49 | 47 | 28. Supplying, fitting and fixing shower of approved brand and make. (a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model -\nTropical / Sumthing Special of ESSCO or similar brand). | BI01010001010000000000000515BI0100001153 | 4 | Each |
| 50 | 48 | 28.10) (f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). | BI01010001010000000000000515BI0100001154 | 4 | Each |
| 51 | 49 | 29. Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (vi) 32 mm dia | BI01010001010000000000000515BI0100001155 | 3 | Cum. |
| 52 | 50 | (vii) 25 mm dia | BI01010001010000000000000515BI0100001156 | 4 | Each |
| 53 | 51 | 30. Supplying, fitting and fixing bib cock or stop cock. (f) (i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO /ATLAS or equivalent)\n15 mm | BI01010001010000000000000515BI0100001157 | 8 | Each |
| 54 | 52 | 30.10) d) (ii) Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand). | 16 | Each | |
| 55 | 53 | 31. Supplying, fitting and fixing CPVC (Chlorinated\nPolyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in\nany position above ground.\n(b) For Concealed Work\n(i) CPVC Pipes Class-1, SDR-11 (Dia)\n15 mm | BI01010001010000000000000515BI0100001158 | 60 | Each |
| 56 | 54 | 20 mm | BI01010001010000000000000515BI0100001159 | 25 | Each |
| 57 | 55 | (a) For Exposed Work\n(i) CPVC Pipes Class-1, SDR-11 (Dia)\n25 mm | BI01010001010000000000000515BI0100001160 | 20 | Each |
| 58 | 56 | 32 mm | BI01010001010000000000000515BI0100001161 | 30 | Each |
| 59 | 57 | 32. Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two\ncoats of painting to bracket etc. | BI01010001010000000000000515BI0100001162 | 4 | Each |
| 60 | 58 | 33. Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (d) 2000 litre capacity | BI01010001010000000000000515BI0100001163 | 1 | Each |
| 61 | 59 | 34. Labour for hoisting plastic water storage tank. (ii) Above 1500 litre upto 5000 litre capacity. (b) Extra for each additional story | BI01010001010000000000000515BI0100001164 | 1 | Each |
| 62 | 60 | 35. Labour for punching hole in plastic water storage tank upto 50 mm dia. | BI01010001010000000000000515BI0100001165 | 3 | Each |
| 63 | 61 | 36. Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,\nC.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved\nquality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. | BI01010001010000000000000515BI0100001166 | 3 | Each |
| 64 | 62 | 37. Supplying, fitting and fixing pedestal of approved make for wash basin (white) | BI01010001010000000000000515BI0100001167 | 3 | Each |
| 65 | 63 | 38. Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 600 mm long | BI01010001010000000000000515BI0100001168 | 10 | Each |
| 66 | 64 | 39. Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (iii) 900 mm long | BI01010001010000000000000515BI0100001169 | 4 | Each |
| 67 | 65 | 40. Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992\n(A) (i) Single Socketed 3 Meter Length\n(b) 110 mm | BI01010001010000000000000515BI0100001170 | 40 | Each |
| 68 | 66 | (a) 75 mm | BI01010001010000000000000515BI0100001171 | 25 | Each |
| 69 | 67 | (ii) Plain Tee\n(b) 110 mm | 4 | Each | |
| 70 | 68 | (iii) Door Tee\n(b) 110 mm | 6 | Each | |
| 71 | 69 | xii) Door Bend (LH) & (RH)\n(b) 110 mm | 6 | Each | |
| 72 | 70 | (a) 75 mm | 12 | Each | |
| 73 | 71 | xv) Vent Cowl\n(b) 110 mm | 6 | Each | |
| 74 | 72 | xvi) Pipe Clip\n(b) 110 mm | 20 | Each | |
| 75 | 73 | 41. Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials.\n(ii) 110 mm dia. | 40 | Each | |
| 76 | 74 | (i) 75 mm dia | 25 | Each | |
| 77 | 75 | 42. Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).\n(i) 580 mm X 440 mm | 4 | Each | |
| 78 | 76 | 43. Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75\nmm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm | 3 | Each | |
| 79 | 77 | 44. Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.\ni) Polythene Flush Pipe | 4 | Each | |
| 80 | 78 | 45. Supplying, fitting and fixing porcelain partition wall of approved make of size 618 mm X 310 mm complete in all respect. | 2 | Each | |
| 81 | 79 | 46. Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (ii) 600 mm X 450 mm | 3 | Each | |
| 82 | 80 | 47. Supplying, fitting and fixing towel rail with two brackets. (b) Aluminium (ii) 25 mm dia. and 600 mm long | 6 | Each | |
| 83 | 81 | 48. Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, | 5 | Each | |
| 84 | 82 | 49. Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation\n(iv) For 50 users | BI01010001010000000000000515BI0100001172 | 1 | Each |
| 85 | 83 | 50. Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well (SAIL/TATA/RINL) | BI01010001010000000000000515BI0100001175 | 1 | Each |
| 86 | 84 | Add 7.50% Cost of Elect4rical Works | 1 | Each | |
| 87 | 85 | Add GST @ 12 % | 1 | Each | |
| 88 | 86 | Add LWC @ 1 % | 1 | Each | |
| 89 | 87 | Note Each @ 2504567 x 1 | 1 | Each |
AI Tender Summary
Tender Timeline
Dec 30, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJan 15, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 18, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender