Military Engineer Services-MES has published Provision Of Chemical Earthing Pits , Lightening Arrester , Water Points , Deep Freezer , Water Cooler , Desert Cooler , Exhaust Fans Alongwith Replacement Of Tube Lights/Cfl With Led Lights At Various Sectors Of Gandhinagar And Icgs Under Ge Af Chi. Submission Date for this Tender is 25-01-2021. Electrification Work Tenders in GANDHINAGAR AND ICGS Gujarat. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Jan-2021 | Revised BOQ | BOQ | 18-01-2021 |
| 2 | 18-Jan-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-01-2021 |
| Name of Work: PROVN OF CHEMICAL EARTHING PITS, LIGHTENING ARRESTER, WATER POINTS, DEEP FREEZER,WATER COOLER, DESERT COOLER, EXHAUST FANS ALONGWITH REPLACEMENT OF TUBE LIGHTS/CFL WITH LED LIGHTS AT VARIOUS SECTORS OF GANDHINAGAR AND ICGS UNDER GE AF CHILODA | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | M&L for chemical earthing complete with copper earth plate of 90x60x5 mm buried directly in ground (Earth pit not less than 4.0 m below the ground levelwith top edge of the earth plate at a depth not less than 3.25 m below ground level connected to and including copper earth strip 50x6x7.5 mm long and connected to test point terminal block by means of copper nuts,bolts,check nuts & washer etc all as specified and directed.\nNote:- The rate quoted shall deemed to be inclusive of the following:-\n(a) Excavation & earth work (filling in ramming in layers,watering etc. as directed ) in any type of soil for earth pit of size 1.23m X 1.2m X 4.0m deep\n(b) 20 mm bore mild steel sleeve galvanized iron tubing light grade for watering purpose complete.\n(c) 63 mm bore mild steel galvanized iron tubing light grade 2.85 m long for strip protection\n | 5 | EACH JOB | |
| 2 | 1.01 | (d) Common salt and charcol dust in alteranative layers of 15 cm upto 90 cm above the top copper plate & one layer of 15 cm magnisium sulphate(MgSO4) (Approximate quantity of salt 500 KG,Charcol dust 1000kg and MgSO4 150 kg)\n(e) earth chamber built in cement mortar 1:3:6 type C1 (using 20 cm graded stone aggregate) of size 600x600x600 (overall internal) comprising of 15 cm thick PCC bed extended 10 cm beyond outer face of wall and 15 cm thick wall,50 cm thiick RCC chamber cover slab in RCC\n1:2:4 type B1 reinforced with X PM (weight not less han 4 kg/Sqm ) having MS angle frame of size 50x50x3 mm with lifting arrangement MS cover painted with two coat green cement based paint including marking the chamber as earth pir with writing of inspection test date & earth result with black & white paint all as specified and directed by EIC | |||
| 3 | 2 | M& L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of size 32x6 mm copper strip complete. | 45 | RM | |
| 4 | 3 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out in soft/loose soil complete. | 87.9 | CUM | |
| 5 | 4 | Excavation in trenches exceeding 1.5 mtr wide and not exceeding 3.0 mtr in depth and getting out in soft/loose soil complete. | 1.16 | CUM | |
| 6 | 5 | Returning filling in trenches including spreading, overelling, watering and well ramming in layers not exceeding 25 cm. | 2.06 | CUM | |
| 7 | 6 | Removing excavation materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point. | 0.8 | CUM | |
| 8 | 7 | Material and labour plain cement concrete (1:3:6) type C2 (using 40 mm graded stone for foundation) complete all as specifird and directed. | 2.3 | CUM | |
| 9 | 8 | Material and labour plain cement concrete (1:4:8) type D2 (using 40 mm graded stone for foundation) complete all as specifird and directed. | 0.3 | CUM | |
| 10 | 9 | Material and labour plain cement concrete (1:2:4) type B2 (using 40 mm graded stone for foundation) complete all as specifird and directed. | 0.256 | CUM | |
| 11 | 10 | Supply,erection and fix steel tubular swaged poles with ladder as specified 410 SP-80 (16 meter long) complete with CI base plate,foundtation bolt and finial including two coat of aluminium paint above the two coat of red oxide primer and shall be coated with two coasts of black bituminous paint throughout internally, with making arrangement to fix the lighting arrestor on the pole all as per directed by EIC Finials and base plate shall be of cast iron and conform to the details given in fig. 3 and 4 of the Standard (I.S. 2713 Part 1 to 3-1980).\n | 1 | EACH JOB | |
| 12 | 11 | Supply, Erection of External Active lightning protection with which Complies & Tested to National & International Standard like IEC 60060-1, IEC 61083-1, NF C17-102:2011,UNE 21186:2011 and NP 4426:2013 & AENOR Certified, DAT Controller certified endurance to Extreme Environmental conditions (Salt mist and humid sulphurous atmosphere tests & withstood Current 100Ka (10/350micro Sec by advance time test, DAT Controller Certified of performance under rain Insulation superior to 95% according to IEC6006-1 Area Covered : Level 1 -79 Mtr Radius | Level 2- 87 Mtr Radius Level 3 -97 Mtr Radius | Level 4- 107 Mtr Radius Model : DAT CONTROLLER Plus 15 (make-As per Appendix B /AT-SPAIN ,Technotech,Aplications Technologoies and equivalent) | 1 | EACH JOB | |
| 13 | 12 | Supply ,fix and testing External Lightning Event Counter-ATLOGER\nWhich compiles to National & International Standard like IEC 60060-1, IEC 61083-1, NF C17-102:2011, UNE 21186:2011 and NP 4426:2013 & AENOR Certified and having following facility\n• Smart lightning event counter that records the passage of lightning strike discharge, amplitude,Polarity, Date & Time\n• Storages of events in 0-9999 Without disconnect to be installed and Counting Make: (As per Appendix B /AT-SPAIN,Technotech,Aplications Tchlogoies and equivalent) | 1 | EACH JOB | |
| 14 | 13 | Supply and fix trestle tower(High Mast) for mounting AT- Spain Flash\nCaptor Needing to exceed a point and increase the height.The base of these wind braces should be equipotentally Bonded to the down-conductors.Trestle towers can also be placed on walls using a\nTower-wall support of 6 Mtr. MOC of structure made from Galvanized Iron\nIncluding Other Accessories .Threaded Insulated AdaptorTerminal Clamp\nGay wire For Supporting High Mast Copper Lugs As per suitable Single Core Copper Cable SS Nut Bolts For Connection Make : As per Appendix B /Powertrac ,Technotech,Aplications Technologoies and equivalent | 1 | EACH | |
| 15 | 14 | Supplya and fix GI Earthing Electrode,Dual Electrode Technologyb Filled With HCC Field Compound Pipe Dia : 80mm, Length :3 Meter with 50 KG SRIP (BFC) Compound MAKE-POWERTRAC, Technotech,Aplications Tchlogoies and equivalent) | 3 | EACH JOB | |
| 16 | 15 | Supply and fix Polyplast Earthing Chamber Cover all as directed by EIC | 3 | EACH | |
| 17 | 16 | Supply and fix FRP Based Earthing Display Board,With Support Stand,Width- 254mm, Length-380mm, Height-610mm MAKE-POWERTRAC and equivalent | 3 | EACH | |
| 18 | 17 | Supply and fix down Conductor Size: 70 sqmm Single Core Flexible Copper Cable ( Single Run of Down Conductor) | 25 | RM | |
| 19 | 18 | Commissioning and testing of Dat Controller Plus Lightning Arrestor, GI High Mast, Counter , “CHEMO” M F Earthing Electrode, Earthing Chamber cover all as dirrected by EIC | 1 | EACH | |
| 20 | 19 | Supply and laying in trenches GI tubing of medium grade with all fittings such as tee,bend elbow ,socket joint,short pieces connector ,union etc of 20 mm dia complete all as spefied and directed by EIC. | 320 | RM | |
| 21 | 20 | Supply and fix bronze ball valve of 20 mm handle type in GI pipe of 20 mm with nipple of 2" to connect to flexble pipe for gardening purpose complete all as directed by EIC | 6 | EACH | |
| 22 | 21 | Supply, installation, commissioning of Glass Top Deep Freezer single phase 240 volt, 50 Hz of 320 litre capacity complete. | 2 | EACH | |
| 23 | 22 | M&L for point wiring of cable of size 2.5 Sq mm PVC insulated on independent board for power plug 15 Amps complete all as specified and directed by Eng-In-Charge. | 2 | PER POINT | |
| 24 | 23 | Supply and fix Switch socket Combination of 16A, 6 pin, 3 module complete all as specified and directed by EIC. | 2 | EACH | |
| 25 | 24 | Suppy and Fix SP of 16 A in existing DB box as per directed by EIC. | 1 | EACH | |
| 26 | 25 | Supply,installation,commisioning of water cooler fully stainless steel,electric driven single phase having approx storage 120 Ltrs and nominal cooling capacity 60 Ltrs per hour.\nMake:- VOLTAS /SAMSUNG/ BLUESTAR/ GODREJ/ LG | 1 | EACH | |
| 27 | 26 | S&F R.O. water purifier of 25 Ltrs capacity with UV and TDS Controller with pump etc complete all as directed by Engr-In-Charge.\nMake:- ION Exchange/ Aquaguard/ Kent/ Marvel | 1 | EACH | |
| 28 | 27 | M & L for concealed point wiring complete with PVC insulated / unsheathed stranded copper conductor of wire 2.5 Sqmm, FRLS 1100 volts grade, alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly in and including PVC conduit pipe and fitting of 20 mm dia fixed in concealed surface of wall/ceiling /false ceiling including cutting / chasing in wall as required with powder coated sheet metal terminal boxes of required sizes and thickness (factory made) sunk in wall cover with 3.0 mm thick laminated sheet where as required and accessories complete suitable for the 3 Pin 15 Amp socket outlet on independant board all as specified and directed. | 1 | PER POINT | |
| 29 | 28 | Supply and laying in trenches GI tubing of medium grade with all fittings such as tee,bend elbow ,socket joint,short pieces connector ,union etc of 25 mm dia complete all as spefied and directed by EIC. | 26 | RM | |
| 30 | 29 | S&F gun-metal, globe or gate valves of size 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed. | 1 | EACH | |
| 31 | 30 | S&F stop valves, cast copper alloy, screwed down, high pressure, with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixed to15 mm bore pipe complete all as specified and directed. | 1 | EACH | |
| 32 | 31 | Supply and install desert cooler electric driven steel body (single phase) having nominal air flow capacity of 4000cum/hours (or nearest higher capacity) including provision of wheel mounted all as specified and directed. | 12 | EACH | |
| 33 | 32 | Taking down carefully existing CFL lights from false ceiling including fixture and fittings etc, removing material to store for keeping in safe custody or for taking credit, and making good disturbed false ceiling etc. | 245 | EACH | |
| 34 | 33 | Supply and fixing for LED downlights of Edgepro round, recess mounting fitting 15-20 watts capacity complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductior cable of size 1.5 sqmm all as specified. | 85 | EACH | |
| 35 | 34 | Supply and fixing for LED tube light fittings 1x22Watts, single side connection 230 volts surface and wall mounted LED type, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductior cable of size 1.5 sqmm all as specified. | 70 | EACH | |
| 36 | 35 | Supply and fixing for LED 34W/36W 2x2 panel, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armsstrong/Grid ceiling complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductior cable of size 1.5 sqmm all as specified. | 50 | EACH | |
| 37 | 36 | Supply and fixing for LED 36W 4x1 panel, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armsstrong/Grid ceiling complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductior cable of size 1.5 sqmm all as specified. | 20 | EACH | |
| 38 | 37 | Supply and fix wall mounted LED mirror light 2 feet 9 /10 Watt giving minimum lumen output of 800 Lumen in aluminium housing & decorative end caps with inbuilt driver. | 20 | EACH | |
| 39 | 38 | Supply & fix bulb retrofit type 15 watt LED bulb minimum lumens 900, suitable for 180 volt o 280 volt. | 40 | EACH | |
| 40 | 39 | M&L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings. | 40 | EACH | |
| 41 | 40 | Supply and fixing for Heavy duty exhaust fans, AC single phase 230/ 240 V of size 300mm sweep, 1400 RPM with louver including cutting opening in brick wall for fixing of Exhaust fan 300 mm sweep including grouting of 4 Nos bolts for fixing of exhaust fan in wall and making good the disturbed surfaces including arrangements provision of 2 way PVC connector copper bunched flexibe cable 23/0.0076 twin twisted PVC insulated cable from ceiling rose/connector to fan complete all as specified and directed. \n | 90 | EACH | |
| 42 | 41 | Supply and fixing for Heavy duty exhaust fans, AC single phase 230/ 240 V of size 450mm sweep, 1400 RPM with ”louver including cutting opening in brick wall for fixing of Exhaust fan 450 mm sweep including grouting of 4 Nos bolts for fixing of exhaust fan in wall and making good the disturbed surfaces including arrangements provision of 2 way PVC connector copper bunched flexibe cable 23/0.0076 twin twisted PVC insulated cable from ceiling rose/connector to fan complete all as specified and directed. \n | 15 | EACH | |
| 43 | 42 | Supply and fixing for Fresh Air(Ventilating) fan, AC single phase 230/ 240 V of size 200mm sweep with louver including cutting opening in brick wall for fixing of Fresh Air fan 200 mm sweep including grouting of 4 Nos bolts for fixing of exhaust fan in wall and making good the disturbed surfaces including arrangements provision of 2 way PVC connector copper bunched flexibe cable 23/0.0076 twin twisted PVC insulated cable from ceiling rose/connector to fan complete all as specified and directed. | 130 | EACH | |
| 44 | 43 | M & L for point wiring for Exhaust fan / Fresh Air fan point controlled by one switch with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor drawn in and including rigid PVC conduit concealed /PVC surface conduit with sunk cast iron/pressed steel terminal boxes of adequate size with 3mm thickness plastic laminated sheet, cover of adequate size including 1.5 Sqmm FRLS PVC insulated and unsheathed multi stranded flexible copper conductor FRLScable ISI marked as earth continuity conductor (green colour) complete all as specified and as directed | 235 | EACH | |
| 45 | 44 | Supply and fixing sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links ( without MCB's) 8 ways SPN complete all as directed by Engineer-in-Charge. | 40 | EACH | |
| 46 | 45 | Supply and fixing MCB, 2 pole 240 volts, 32 Amps capacity complete all as specified and directed by Engineer-in-Charge. | 40 | EACH | |
| 47 | 46 | Supply and fixing MCB, single pole 240 volts capacity 5 Amps to 32 Amps current rating, 10KA breaking capacity complete all as specified and directed by Engineer-in-Charge. | 240 | EACH | |
| 48 | 47 | S & F ceiling rose surface bakelite 65 x 50mm, flush type 3 terminals complete all as specified and directed . | 235 | EACH | |
| 49 | 48 | Supply and fixing for switch piano, flush type, single pole one way 5 Amps | 235 | EACH |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
