Kadayanallur Municipality , Providing And Laying Of Bt Road At Kumanathapuram North Vilai Colony Street In Ward No , 1 , Muppudathi Amman Kovil North Street ( Prithiyangiri Thevi Temple St ) And Krishnapuram Brahmin Burial Ground Road In Ward
Tender Value
1 Crore
Estimated cost
Bid Submission
11 Jan 2021
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KADAYANALLUR → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Kadayanallur Municipality , Providing And Laying Of Bt Road At Kumanathapuram North Vilai Colony Street In Ward No , 1 , Muppudathi Amman Kovil North Street ( Prithiyangiri Thevi Temple St ) And Krishnapuram Brahmin Burial Ground Road In Ward No . 2
BOQ
| Name of work: Providing and Laying of BT Road at Kumanathapuram North vilai Colony street in ward no:1 , Muppudathi amman kovil north street ( Prithiyangiri thevi Temple st) and Krishnapuram Brahmin Burial Ground Road in ward no:2 and Krishnankovil S/n street in ward no: 21 & Kannar south street in ward no:22 and Laying of Paverblock road at Rahumaniyapuram 8th street west Portion , 9th street west portion in ward no:32 , Nathagar Pllivasal street , Mathinanagar 10th street in ward no:29 , Kaliammankovil south street in ward no:11 and Middle street in ward no: 21 - (Package-1) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Preparing the Existing surface to laying the road to Proper Camber and Gradient and remove the loose soil without damage the Water Supply and other Pipe lines. The Rate inclusive of all charges such as Earth work and remove the same away from the site etc, complete as per standard specifications. | 1245 | Cum | |
| 2 | 2 | Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification and as directed by the departmental officers. Morth - Rev V No. 111,112,401,900 | 535 | Cum | |
| 3 | 3 | Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. | 1235 | Cum | |
| 4 | 4 | Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev-5 Specifications | 3985 | Sqm | |
| 5 | 5 | Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications | 3985 | Sqm | |
| 6 | 6 | Providing and laying 50 mm compacted thick dense bituminous macadam using 0.24 cum of 26.5-13.2 mm graded metal and 0.25 cum of 13.2-2.36 mm graded metal and 0.23 cum of 2.36 mm & below metal with 53.20 kgs of 60/70 bitumen for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site,spreading the mix in required temperature for uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc.,including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler,tipper trucks, paver finisher, vibratory rollers and all other tools and plants required,including all other incidental charges etc.,complete using C M P clause 505 of MORTH Rev-5 specifications. | 200 | Cum | |
| 7 | 7 | Providing and laying Bituminous concrete to 30mm thick using 0.13 cum of 19.00-9.50 mm graded metal and 0.17 cum of 9.50-2.36 mm graded metal and 0.26 cum of 2.36 mm & below metal with 45.27 kgs of 60/70 bitumen & 5.03Kg of Plastic waste (Total-50.30 kg) and for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 40mm / 30mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc., including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler,tipper trucks, paver finisher, Vibratory rollers and all other tools and plants required,including all other incidental charges etc.,complete using C M P clause 507 of MORTH Rev-5 specifications. | 120 | Cum | |
| 8 | 8 | Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with Stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, Stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. | 2965 | Sqm | |
| 9 | 9 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250grams per sqm area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level uniform and free form streaks and holes etc., complete(as per MORT & H specification No.803) | 200 | Sqm | |
| 10 | 10 | Providing and errecting direction and place identification retro- reflectorised sign in size 1200x60mm as per IRC : 67-2010 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.50mm thick fixed on back supporting frame and supported on a mild steel single angle iron post 75X75X6mm firmly fixed to the ground by means of properly designed formation with M15 grade cement on size 45X45X60cm, 60cm below ground level as per approved drawing. | 4 | No |
AI Tender Summary
Tender Timeline
Dec 30, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJan 11, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 12, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender