Renovation And Upgradation Of Infrastructure Of Giti At Dugadda , Distt . Pauri Garhwal Uttarakhand, Duggada Kotdwar-Uttarakhand

TDR : 26419679

Tender Notice
Corrigendum Details
BOQ

Expired

Duggada Kotdwar , Uttarakhand

Tender Brief : Corrigendum : Renovation And Upgradation Of Infrastructure Of Giti At Dugadda , Distt . Pauri Garhwal Uttarakhand

Document Fees
₹ 5900 /-

EMD
₹ 306000.0 /-

Tender Value
₹ 3.05 Crore /-

Submission Date
04-02-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	27-01-2021	corrigendum1	Other	04-02-2021
2	27-01-2021	date extension	Date	04-02-2021
3	11-01-2021	BOQ replaced	BOQ	28-01-2021

Name of Work: Renovation & Upgradation of Infrastructure of GITI at Dugadda, Uttarakhand
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/Chemical fasteners of appropriate size (3 nos on each\nvertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener	BI01010001010000000000000515BI0100001126	46	Each
2	2	Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge	BI01010001010000000000000515BI0100001127
3	3	For door/ window/ clerestory window	BI01010001010000000000000515BI0100001128	46	SQM
4	4	.Demolishing cement concrete manually/ by mechanical means\nincluding disposal of material within 50 metres lead as per direction\nof Engineer - in - charge.	BI01010001010000000000000515BI0100001129
5	5	Nominal concrete 1:3:6 or richer mix (i/c equivalent design\nmix)	BI01010001010000000000000515BI0100001130	110.03	cum
6	6	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.	BI01010001010000000000000515BI0100001131
7	7	In cement mortar	BI01010001010000000000000515BI0100001132	118.92	Cum
8	8	Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:	BI01010001010000000000000515BI0100001133
9	9	Of area 3 sq. metres and below	BI01010001010000000000000515BI0100001134	76	Each
10	10	Of area beyond 3 sq. metres	BI01010001010000000000000515BI0100001135	23	Each
11	11	Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :	BI01010001010000000000000515BI0100001136
12	12	Of area 3 sq. metres and below	BI01010001010000000000000515BI0100001137	43	Each
13	13	Of area beyond 3 sq. metres	BI01010001010000000000000515BI0100001138	17	Each
14	14	Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.	BI01010001010000000000000515BI0100001139	610	Sqmt
15	15	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.	BI01010001010000000000000515BI0100001140	3423.29	Each
16	16	Providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the Engineer-in-charge.	BI01010001010000000000000515BI0100001141
17	17	Wooven PVC cloth	BI01010001010000000000000515BI0100001142	1451.5	Sqmt
18	18	Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.	BI01010001010000000000000515BI0100001143
19	19	All kind	BI01010001010000000000000515BI0100001144	444	Sqm.
20	20	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.	BI01010001010000000000000515BI0100001145	289.24	Cum
21	21	Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete.	BI01010001010000000000000515BI0100001146	30.84	Cum
22	22	Providing,and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge.	BI01010001010000000000000515BI0100001147	183.26	Sqmt
23	23	Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :	BI01010001010000000000000515BI0100001148
24	24	Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:	BI01010001010000000000000515BI0100001149
25	25	With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration	BI01010001010000000000000515BI0100001150	265.78	RM
26	26	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :	BI01010001010000000000000515BI0100001151
27	27	1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)	BI01010001010000000000000515BI0100001152	26.79	Cum.
28	28	Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).\n	BI01010001010000000000000515BI0100001153
29	29	All works upto plinth level	BI01010001010000000000000515BI0100001154	50.74	Cum.
30	30	Extra for providing richer mixes at all floor levels.	BI01010001010000000000000515BI0100001155
31	31	Note:- Excess/less cement over the specified cement content used is payable /recoverable separately.	BI01010001010000000000000515BI0100001156
32	32	Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. (Note:- Cement content considered in M-30 is @ 340 kg/ cum) \n	BI01010001010000000000000515BI0100001157	33.41	Cum.
33	33	Centering and shuttering including strutting, propping etc. and removal of form for :	BI01010001010000000000000515BI0100001158
34	34	Foundations, footings, bases of columns, etc. for mass concrete	BI01010001010000000000000515BI0100001159	61.98	Sqm.
35	35	Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.	BI01010001010000000000000515BI0100001160	185.12	Sqm
36	36	Suspended floors, roofs, landings, balconies and access platform	BI01010001010000000000000515BI0100001161	151.58	Sqm.
37	37	Lintels, beams, plinth beams, girders, bressumers and cantilevers	BI01010001010000000000000515BI0100001162	66.76	Sqm.
38	38	Columns, Pillars, Piers, Abutments, Posts and Struts	BI01010001010000000000000515BI0100001163	21.6	Sqm.
39	39	Stairs, (excluding landings) except spiral-staircases	BI01010001010000000000000515BI0100001164	32.67	Sqm.
40	40	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.	BI01010001010000000000000515BI0100001165
41	41	Thermo-Mechanically Treated bars of grade Fe-500D or more.	BI01010001010000000000000515BI0100001166	10837.2	Kg
42	42	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:	BI01010001010000000000000515BI0100001167
43	43	Cement mortar 1:6 (1 cement : 6 coarse sand)	BI01010001010000000000000515BI0100001168	32.9	Cum
44	44	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :	BI01010001010000000000000515BI0100001169
45	45	Cement mortar 1:6 (1 cement : 6 coarse sand)	BI01010001010000000000000515BI0100001170	35.21	Cum
46	46	Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.	BI01010001010000000000000515BI0100001171	39.89	Cum
47	47	Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).	BI01010001010000000000000515BI0100001172	143.35	Cum
48	48	Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc.	BI01010001010000000000000515BI0100001173
49	49	White sand stone	BI01010001010000000000000515BI0100001174	68.4	Sqmt
50	50	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.	BI01010001010000000000000515BI0100001175
51	51	Granite of any colour and shade	BI01010001010000000000000515BI0100001176
52	52	Area of slab over 0.50 sqm	BI01010001010000000000000515BI0100001177	10.26	Sqm.
53	53	Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.	BI01010001010000000000000515BI0100001178
54	54	Granite of any colour and shade	BI01010001010000000000000515BI0100001179	18.9	RM
55	55	Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.	BI01010001010000000000000515BI0100001180	17.1	RM
56	56	Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite /stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.	BI01010001010000000000000515BI0100001181	9	Each
57	57	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:	BI01010001010000000000000515BI0100001182
58	58	35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws	BI01010001010000000000000515BI0100001183	15.84	Sqm.
59	59	Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).	BI01010001010000000000000515BI0100001184	15.84	Sqm.
60	60	Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):	BI01010001010000000000000515BI0100001185
61	61	Rectangular or Sqare	BI01010001010000000000000515BI0100001186	30.24	Sqm.
62	62	Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete :	BI01010001010000000000000515BI0100001187
63	63	150x125x27x5 mm	BI01010001010000000000000515BI0100001188	104	Each
64	64	Providing and fixing bright finished brass door latch with necessary screws etc. complete :	BI01010001010000000000000515BI0100001189
65	65	300x16x5 mm	BI01010001010000000000000515BI0100001190	6	Each
66	66	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :	BI01010001010000000000000515BI0100001191
67	67	300x10 mm	BI01010001010000000000000515BI0100001192	4	Each
68	68	250x10 mm	BI01010001010000000000000515BI0100001193	4	Each
69	69	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :	BI01010001010000000000000515BI0100001194
70	70	125 mm	BI01010001010000000000000515BI0100001195	16	Each
71	71	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.	BI01010001010000000000000515BI0100001196
72	72	Twin rubber stopper	BI01010001010000000000000515BI0100001197	8	Each
73	73	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :	BI01010001010000000000000515BI0100001198
74	74	Float glass panes	BI01010001010000000000000515BI0100001199
75	75	4 mm thick glass pane (weight not less than\n10 kg per sqm)	BI01010001010000000000000515BI0100001200	184.68	Sqm.
76	76	Providing and fixing fly proof stainless steel grade 304 wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.	BI01010001010000000000000515BI0100001201
77	77	With 12 mm mild steel U beading	BI01010001010000000000000515BI0100001202	184.68	Sqm.
78	78	Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	BI01010001010000000000000515BI0100001203	13680.8	Kg
79	79	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	BI01010001010000000000000515BI0100001204	4450.66	Kg
80	80	Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer.	BI01010001010000000000000515BI0100001205	32.4	Sqm
81	81	Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.	BI01010001010000000000000515BI0100001206
82	82	10 x 60 mm	BI01010001010000000000000515BI0100001207	1588	Each
83	83	10 x 160 mm	BI01010001010000000000000515BI0100001208	232	Each
84	84	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).	BI01010001010000000000000515BI0100001209	1437.93	Kg
85	85	Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.	BI01010001010000000000000515BI0100001210
86	86	On steel work	BI01010001010000000000000515BI0100001211	113.4	Sqmt
87	87	Encasing rolled steel sections, in beams and columns, with cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size), including centering and shuttering complete but , excluding cost of reinforcement.	BI01010001010000000000000515BI0100001212	22.85	Cum.
88	88	62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.	BI01010001010000000000000515BI0100001213	581.23	Sqm.
89	89	Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.	BI01010001010000000000000515BI0100001214
90	90	18 mm thick	BI01010001010000000000000515BI0100001215	33.51	Sqm.
91	91	40 mm thick marble chips flooring rubbed and polished to granolithic\nfinish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2\ncoarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top\nlayer 6mm thick with white, black, chocolate, grey, yellow or green\nmarble chips of sizes from 1 mm to 4 mm nominal size, laid in cement\nmarble powder mix 3:1 (3 cement : 1 marble powder) by weight in\nproportion of 4:7 (4 cement marble powder mix : 7 marble chips) by\nvolume, including cement slurry etc. complete :\n	BI01010001010000000000000515BI0100001216
92	92	Medium shade pigment with 50% white cement and 50% ordinary cement	BI01010001010000000000000515BI0100001217	176.99	Sqmt
93	93	Marble chips skirting up to 30 cm height, rubbed and polished to\ngranolithic finish, top layer 6 mm thick with white, black, chocolate,\ngrey, yellow or green marble chips of sizes from smallest to 4 mm\nnominal size, laid in cement marble powder mix 3:1 (3 cement : 1\nmarble powder) by weight in proportion of 4:7 (4 cement marble powder\nmix : 7 marble chips) by volume :18 mm thick with under layer 12 mm thick in cement\nplaster 1:3 (1 cement : 3 coarse sand) :	BI01010001010000000000000515BI0100001218
94	94	Medium shade pigment with 50% white cement and 50% ordinary cement	BI01010001010000000000000515BI0100001219	21.14	Sqmt
95	95	Providing and fixing glass strips in joints of terrazo/ cement concrete\nfloors	BI01010001010000000000000515BI0100001220
96	96	40 mm wide and 4 mm thick	BI01010001010000000000000515BI0100001221	449.6	RM
97	97	Extra for pre finished nosing to treads of steps of marble stone/ granite.	BI01010001010000000000000515BI0100001222	218.1	RM
98	98	Extra for marble stone/ granite flooring in treads of steps and risers using single length up to 2.00 metre.	BI01010001010000000000000515BI0100001223	185.81	Sqm.
99	99	Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:	BI01010001010000000000000515BI0100001224
100	100	With average thickness of 120 mm and minimum thickness at khurra as 65 mm.	BI01010001010000000000000515BI0100001225	626	Each
101	101	Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.	BI01010001010000000000000515BI0100001226	34	Sqm.
102	102	Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:	BI01010001010000000000000515BI0100001227
103	103	Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.	BI01010001010000000000000515BI0100001228
104	104	IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.	BI01010001010000000000000515BI0100001229
105	105	IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.	BI01010001010000000000000515BI0100001230
106	106	IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).	BI01010001010000000000000515BI0100001231	32.4	Sqm.
107	107	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.	BI01010001010000000000000515BI0100001232
108	108	Size of Tile 600x600 mm	BI01010001010000000000000515BI0100001233	979.04	Sqm.
109	109	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.	BI01010001010000000000000515BI0100001234
110	110	Size of Tile 600x600 mm or300x600mm	BI01010001010000000000000515BI0100001235	544.28	Sqm.
111	111	Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :	BI01010001010000000000000515BI0100001236
112	112	Flamed Finish Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.	BI01010001010000000000000515BI0100001237	627.51	Sqm.
113	113	12 mm cement plaster of mix :\n 1:4 (1 cement: 4 fine sand)	BI01010001010000000000000515BI0100001238	5104.84	Sqm.
114	114	15 mm cement plaster on rough side of single or half brick wall of mix:	BI01010001010000000000000515BI0100001239
115	115	1:6 (1 cement: 6 Find sand)	BI01010001010000000000000515BI0100001240	364.44	Sqm.
116	116	Distempering with oil bound washable distemper of approved brand\nand manufacture to give an even shade :\nNew work (two or more coats) over and including water\nthinnable priming coat with cement primer	BI01010001010000000000000515BI0100001241	5104.84	Sqm.
117	117	Finishing walls with water proofing cement paint of required shade :	BI01010001010000000000000515BI0100001242
118	118	Finishing walls with Premium Acrylic Smooth exterior paint with\nSilicone additives of required shade:	BI01010001010000000000000515BI0100001243
119	119	New work (Two or more coats applied @ 1.43 ltr/10 sqm\nover and including priming coat of exterior primer applied\n@ 2.20 kg/10 sqm)	BI01010001010000000000000515BI0100001244	967.31	Sqm.
120	120	French spirit polishing :	BI01010001010000000000000515BI0100001245
121	121	Two or more coats on new works including a coat of wood filler	BI01010001010000000000000515BI0100001246	159.08	Sqm.
122	122	Painting with synthetic enamel paint of approved brand and\nmanufacture to give an even shade :Two or more coats on new work\n	BI01010001010000000000000515BI0100001247	675.9	Sqm.
123	123	Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.	BI01010001010000000000000515BI0100001248	250	Sqm.
124	124	Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete\nbut excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent,\nclear or pigmented, textured or smooth as specified.	BI01010001010000000000000515BI0100001249
125	125	2 mm thick flat	BI01010001010000000000000515BI0100001250	170.13	Sqm.
126	126	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	BI01010001010000000000000515BI0100001251	210	Sqm.
127	127	Grading roof for water proofing treatment withCement concrete 1:2:4 (1 cement : 2 coarse sand :\n4 graded stone aggregate 20mm nominal size)	BI01010001010000000000000515BI0100001252	37.39	cum
128	128	Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick	BI01010001010000000000000515BI0100001253	623.21	Sqm.
129	129	Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.	BI01010001010000000000000515BI0100001254	3	Each
130	130	Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-inCharge.	BI01010001010000000000000515BI0100001255	13	Each
131	131	Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.	BI01010001010000000000000515BI0100001256	13	Each
132	132	Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid	BI01010001010000000000000515BI0100001257	5	Each
133	133	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white\nP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests	BI01010001010000000000000515BI0100001258	5	Each
134	134	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :	BI01010001010000000000000515BI0100001259
135	135	Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern	BI01010001010000000000000515BI0100001260	4	Each
136	136	Range of three urinal basins with 10litre white P.V.C.\nautomatic flushing cistern	BI01010001010000000000000515BI0100001261	1	Each
137	137	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :	BI01010001010000000000000515BI0100001262
138	138	Kitchen sink with drain board	BI01010001010000000000000515BI0100001263
139	139	(For Janitor & Oth. areas) 510x1040 mm bowl depth 200mm.	BI01010001010000000000000515BI0100001264	3	Each
140	140	Providing & fixing P.V.C waste pipe for sink or wash basin including PVC waste fittings complete .	BI01010001010000000000000515BI0100001265
141	141	Flexible pipe	BI01010001010000000000000515BI0100001266
142	142	40 mm dia	BI01010001010000000000000515BI0100001267	26	Each
143	143	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing	BI01010001010000000000000515BI0100001268
144	144	Rectangular shape 453x357 mm	BI01010001010000000000000515BI0100001269	4	Each
145	145	Rectangular shape 1500x450 m	BI01010001010000000000000515BI0100001270	2	Each
146	146	C.P brass	BI01010001010000000000000515BI0100001271	5	Each
147	147	Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin- charge.	BI01010001010000000000000515BI0100001272	12	Each
148	148	Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.	BI01010001010000000000000515BI0100001273
149	149	White Agaria Marble Stone	BI01010001010000000000000515BI0100001274	4.5	Sqm.
150	150	15 mm nominal bore	BI01010001010000000000000515BI0100001275	36	Each
151	151	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.	BI01010001010000000000000515BI0100001276
152	152	15 mm nominal bore	BI01010001010000000000000515BI0100001277	10	Each
153	153	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass\npillar taps, 32 mm C.P. brass waste of standard pattern, including\npainting of fittings and brackets, cutting and making good the walls\nwherever require:	BI01010001010000000000000515BI0100001278
154	154	White Vitreous China Wash basin size 630x450 mm with\na single 15 mm C.P. brass pillar tap( PUSH TYPE)	BI01010001010000000000000515BI0100001279	10	Each
155	155	Providing and fixing soil, waste and vent pipes	BI01010001010000000000000515BI0100001280
156	156	100mm dia	BI01010001010000000000000515BI0100001281
157	157	Centrifugally cast (spun) iron socketed pipe as per IS 3989	BI01010001010000000000000515BI0100001282	81	Metre
158	158	Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :	BI01010001010000000000000515BI0100001283
159	159	100mm dia	BI01010001010000000000000515BI0100001284	27	Each
160	160	Providing and fixing M.S. holder bat clamps of approved design to sand cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc.	BI01010001010000000000000515BI0100001285
161	161	For 100 mm dia pipe	BI01010001010000000000000515BI0100001286	81	Each
162	162	Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.	BI01010001010000000000000515BI0100001287
163	163	100mm	BI01010001010000000000000515BI0100001288
164	164	sand cast iron S & S as per IS: 3989	BI01010001010000000000000515BI0100001289	12	Each
165	165	Providing and fixing plain bend of required degree.	BI01010001010000000000000515BI0100001290
166	166	100mm	BI01010001010000000000000515BI0100001291
167	167	sand cast iron S & S as per IS: 3989	BI01010001010000000000000515BI0100001292	26	Each
168	168	Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :	BI01010001010000000000000515BI0100001293
169	169	100 x 100 x 100 x 100mm	BI01010001010000000000000515BI0100001294
170	170	Sand cast iron S&S as per IS 3989	BI01010001010000000000000515BI0100001295	14	Each
171	171	Providing and fixing double equal plain junction of required degree.	BI01010001010000000000000515BI0100001296
172	172	100 x 100 x 100 x 100mm	BI01010001010000000000000515BI0100001297
173	173	Sand cast iron S&S as per IS 3989	BI01010001010000000000000515BI0100001298	8	Each
174	174	Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.	BI01010001010000000000000515BI0100001299
175	175	100 x 100 x 100mm	BI01010001010000000000000515BI0100001300
176	176	Sand cast iron S&S as per IS 3989	BI01010001010000000000000515BI0100001301	6	Each
177	177	Providing and fixing single equal plain junction of required degree.	BI01010001010000000000000515BI0100001302
178	178	100 x 100 x 100mm	BI01010001010000000000000515BI0100001303
179	179	Sand cast iron S&S as per IS 3989	BI01010001010000000000000515BI0100001304	6	Each
180	180	Providing and fixing terminal guard :	BI01010001010000000000000515BI0100001305
181	181	100mm	BI01010001010000000000000515BI0100001306
182	182	Sand cast iron S&S as per IS 3989	BI01010001010000000000000515BI0100001307	6	Each
183	183	Providing and fixing collar :	BI01010001010000000000000515BI0100001308
184	184	100mm	BI01010001010000000000000515BI0100001309
185	185	Sand cast iron S&S as per IS 3989	BI01010001010000000000000515BI0100001310	6	Each
186	186	Providing lead caulked joints to sand cast iron/ centrifugallly cast (spun) iron pipes and fittings of diametre:	BI01010001010000000000000515BI0100001311
187	187	100mm	BI01010001010000000000000515BI0100001312	32	Each
188	188	Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :	BI01010001010000000000000515BI0100001313
189	189	100 mm inlet and 100 mm outlet	BI01010001010000000000000515BI0100001314
190	190	Sand cast iron S&S as per IS: 3989	BI01010001010000000000000515BI0100001315	12	Each
191	191	Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :	BI01010001010000000000000515BI0100001316
192	192	100 mm diameter pipe	BI01010001010000000000000515BI0100001317	81	Metre
193	193	Providing & fixing GI pipes complete with GI fittings and clamps, including cutting & making good the walls etc.	BI01010001010000000000000515BI0100001318
194	194	32 mm dia	BI01010001010000000000000515BI0100001319	28	Metre
195	195	40 mm dia	BI01010001010000000000000515BI0100001320	35	Metre
196	196	50 mm dia	BI01010001010000000000000515BI0100001321	30	Metre
197	197	Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :	BI01010001010000000000000515BI0100001322
198	198	32mm dia nominal bore	BI01010001010000000000000515BI0100001323	28	Metre
199	199	40mm dia nominal bore	BI01010001010000000000000515BI0100001324	35	Metre
200	200	50mm dia nominal bore	BI01010001010000000000000515BI0100001325	30	Metre
201	201	Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.	BI01010001010000000000000515BI0100001326	8	Each
202	202	Providing and fixing on wall face unplaqsticised- PVC rain water pipes confirming to IS: 13592 TYPE A, including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.	BI01010001010000000000000515BI0100001327
203	203	110 mm diameter pipe	BI01010001010000000000000515BI0100001328	102	Metre
204	204	Providing and fixing on wall face unplaqsticised- PVC moulded fitting/ accessories for unplaqsticised- PVC rain water pipes confirming to IS: 13592 TYPE A,including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.	BI01010001010000000000000515BI0100001329
205	205	Coupler	BI01010001010000000000000515BI0100001330
206	206	110mm	BI01010001010000000000000515BI0100001331	26	Each
207	207	Pushfit Coupler	BI01010001010000000000000515BI0100001332
208	208	110mm	BI01010001010000000000000515BI0100001333	8	Each
209	209	Single Tee without door	BI01010001010000000000000515BI0100001334
210	210	110x110x110mm	BI01010001010000000000000515BI0100001335	10	Each
211	211	Bend 87.5 degree	BI01010001010000000000000515BI0100001336
212	212	110mm	BI01010001010000000000000515BI0100001337	11	Each
213	213	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.	BI01010001010000000000000515BI0100001338
214	214	110mm	BI01010001010000000000000515BI0100001339	34	Each
215	215	Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less thaN 440 grams.	BI01010001010000000000000515BI0100001340	8	Each
216	216	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.	BI01010001010000000000000515BI0100001341
217	217	15mm nominal outer dia. Pipes.	BI01010001010000000000000515BI0100001342	60	Metre
218	218	20mm nominal outer dia. Pipes.	BI01010001010000000000000515BI0100001343	45	Metre
219	219	25mm nominal outer dia. Pipes.	BI01010001010000000000000515BI0100001344	30	Metre
220	220	32mm nominal outer dia. Pipes.	BI01010001010000000000000515BI0100001345	40	Metre
221	221	Providing & fixing brass stop cock of approved quality.	BI01010001010000000000000515BI0100001346
222	222	15 mm nominal bore	BI01010001010000000000000515BI0100001347	4	Each
223	223	20 mm nominal bore	BI01010001010000000000000515BI0100001348	8	Each
224	224	Providing and fixing gunmetal gate valve with CI wheel of approved quality (Screwed end)	BI01010001010000000000000515BI0100001349
225	225	25mm nominal bore	BI01010001010000000000000515BI0100001350	12	Each
226	226	32mm nominal bore	BI01010001010000000000000515BI0100001351	4	Each
227	227	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.	BI01010001010000000000000515BI0100001352	2000	LTR
228	228	Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.	BI01010001010000000000000515BI0100001353
229	229	25 mm nominal bore, weighing not less than 62 gms	BI01010001010000000000000515BI0100001354	4	Each
230	230	Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge	BI01010001010000000000000515BI0100001355
231	231	Ordinary rock	BI01010001010000000000000515BI0100001356	194.12	Cum.
232	232	Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.	BI01010001010000000000000515BI0100001357	98.76	Sqm.
233	233	Edges of slabs and breaks in floors and walls	BI01010001010000000000000515BI0100001358
234	234	Under 20 cm wide	BI01010001010000000000000515BI0100001359	24.36	RM
235	235	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.	BI01010001010000000000000515BI0100001360	86	Sqm
236	236	Providing and fixing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12 mm dia. steel bar conforming to IS: 1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 30 x 20 x 15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.	BI01010001010000000000000515BI0100001361	39	Each
237	237	Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality	BI01010001010000000000000515BI0100001362
238	238	L D- 2.5\n	BI01010001010000000000000515BI0100001363
239	239	Rectangular shape 600x450 mm internal dimensions	BI01010001010000000000000515BI0100001364	1	Each
240	240	EHD - 35	BI01010001010000000000000515BI0100001365
241	241	Circular shape 560 mm internal dia	BI01010001010000000000000515BI0100001366	2	Each
242	242	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.	BI01010001010000000000000515BI0100001367	21.8	Sqm.
243	243	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :	BI01010001010000000000000515BI0100001368
244	244	1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 10 mm nominal size).	BI01010001010000000000000515BI0100001369	8.68	Cum
245	245	Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :	BI01010001010000000000000515BI0100001370
246	246	Cement mortar 1:6 (1 cement : 6 coarse sand)	BI01010001010000000000000515BI0100001371	17.66	Sqm.
247	247	12 mm cement plaster finished with a floating coat of neat cement of mix :\n	BI01010001010000000000000515BI0100001372
248	248	1:3 (1 cement: 3 fine sand)	BI01010001010000000000000515BI0100001373	38.64	Sqm.
249	249	Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers	BI01010001010000000000000515BI0100001374
250	250	Per bag of 50 kg cement used in the mix	BI01010001010000000000000515BI0100001375	7	Nos
251	251	Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :\n	BI01010001010000000000000515BI0100001376
252	252	With 20x20 mm square bar	BI01010001010000000000000515BI0100001377	4	Each
253	253	Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.\n	BI01010001010000000000000515BI0100001378
254	254	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5	BI01010001010000000000000515BI0100001379	1	Each
255	255	Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil,and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, with in a lead of 50 m:	BI01010001010000000000000515BI0100001380
256	256	All kinds of soil.	BI01010001010000000000000515BI0100001381
257	257	Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia.	BI01010001010000000000000515BI0100001382	100	RM
258	258	Providing, laying and jointing glazed stone ware pipes grade `A' with stiff mixture of cement mortar in the proportion of 1:1 (1cement :1 fine sand) including testing of joints etc complete.	BI01010001010000000000000515BI0100001383
259	259	150 mm diameter	BI01010001010000000000000515BI0100001384	15	RM
260	260	Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 gradded stone aggregate 40 mm nominal size) upto haunches of S.W. Pipes including bed concrete as per standard design.	BI01010001010000000000000515BI0100001385
261	261	150 mm diameter	BI01010001010000000000000515BI0100001386	90	RM
262	262	250 mm diameter	BI01010001010000000000000515BI0100001387	10	RM
263	263	Providing and fixing square mouth S. W. Gully trap grade `A' complete with C.I. grating brick masonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design	BI01010001010000000000000515BI0100001388
264	264	150 x 100 mm. size P type	BI01010001010000000000000515BI0100001389	3	Nos
265	265	Constructing brick masonry manhole in cement mortar 1 : 4 (1 cement : 4 coarse sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finishd with a floating coat of neat cement complete as per standard design	BI01010001010000000000000515BI0100001390
266	266	Inside size 90 x 80 cm & 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimension total wt. of cover & frame to be not less than 38 kg (wt. of cover 23 kg and wt. of frame 15 kg)	BI01010001010000000000000515BI0100001391
267	267	With F.P.S. bricks with class designation 75	BI01010001010000000000000515BI0100001392	3	Nos
268	268	Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) :	BI01010001010000000000000515BI0100001393
269	269	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5	BI01010001010000000000000515BI0100001394	2	Nos
270	270	Extra for depth for manholes :	BI01010001010000000000000515BI0100001395
271	271	Size 120x90 cm	BI01010001010000000000000515BI0100001396
272	272	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5	BI01010001010000000000000515BI0100001397	4	RM
273	273	Providing and laying non-pressure NP2 Class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement :2 fine sand) including testing of joints etc complete.	BI01010001010000000000000515BI0100001398
274	274	150 mm diameter R.C.C pipes	BI01010001010000000000000515BI0100001399	85	RM
275	275	250 mm diameter R.C.C pipes	BI01010001010000000000000515BI0100001400	10	RM
276	276	Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1 : 4 (1 cement : 4 coarse sand), inside plastering 12 mm thick with cement mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finishd with a floating coat of neat cement complete as per standard design	BI01010001010000000000000515BI0100001401
277	277	0.91 m deep with SFRC cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to IS : 12592, total weight of cover and frame to be not less than 182 Kg fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) with F.P.S.bricks class designation 75	BI01010001010000000000000515BI0100001402	4	Nos
278	278	Extra for depth for circular manhole 0.91m internal dia at bottom with beyond 0.91m to 1.67m.	BI01010001010000000000000515BI0100001403
279	279	With FPS Bricks class designated 75	BI01010001010000000000000515BI0100001404	2	RM
280	280	Constructing brick masonry road gully chamber 50 x 45 x 60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500 x 450mm precast RCC horizontal grating with frame complete as per standard design	BI01010001010000000000000515BI0100001405
281	281	With FPS bricks	BI01010001010000000000000515BI0100001406	10	Nos
282	282	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.\n	BI01010001010000000000000515BI0100001407
283	283	Electric resistance or induction butt welded tubes	BI01010001010000000000000515BI0100001408	486	Kg
284	284	18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.	BI01010001010000000000000515BI0100001409	602.87	Sqm
285	285	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:	BI01010001010000000000000515BI0100001410
286	286	Cement mortar 1:4 (1 cement : 4 coarse sand)	BI01010001010000000000000515BI0100001411	24.55	Cum
287	287	Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete:	BI01010001010000000000000515BI0100001412
288	288	200 mm diameter	BI01010001010000000000000515BI0100001413	12	RM
289	289	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting sAmples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.	BI01010001010000000000000515BI0100001414
290	290	All types of soil.	BI01010001010000000000000515BI0100001415
291	291	300 mm dia	BI01010001010000000000000515BI0100001416	60	RM
292	292	Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.	BI01010001010000000000000515BI0100001417
293	293	150 mm nominal size dia	BI01010001010000000000000515BI0100001418	62	RM
294	294	Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.	BI01010001010000000000000515BI0100001419	39.4	Cum
295	295	Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.	BI01010001010000000000000515BI0100001420	27.4	Cum
296	296	Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.	BI01010001010000000000000515BI0100001421	37.54	Cum
297	297	Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.	BI01010001010000000000000515BI0100001422	17.54	Cum
298	298	Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin-charge.	BI01010001010000000000000515BI0100001423	6	Each
299	299	Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \"V\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water sAmples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.	BI01010001010000000000000515BI0100001424	144	Hrs
300	300	Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:	BI01010001010000000000000515BI0100001425
301	301	150 mm dia	BI01010001010000000000000515BI0100001426	1	Each
302	302	Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).	BI01010001010000000000000515BI0100001427
303	303	150 mm dia	BI01010001010000000000000515BI0100001428	1	Each
304	304	Tubewell & Water Supply Pumps	BI01010001010000000000000515BI0100001429
305	305	Mechanical	BI01010001010000000000000515BI0100001430
306	306	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting sAmples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.	BI01010001010000000000000515BI0100001431
307	307	Rocky strata including Boulders	BI01010001010000000000000515BI0100001432
308	308	400 mm dia	BI01010001010000000000000515BI0100001433	100	RM
309	309	Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge.	BI01010001010000000000000515BI0100001434
310	310	100 mm nominal size dia	BI01010001010000000000000515BI0100001435	110	RM
311	311	200 mm nominal size dia	BI01010001010000000000000515BI0100001436	100	RM
312	312	Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.	BI01010001010000000000000515BI0100001437
313	313	200 mm dia	BI01010001010000000000000515BI0100001438	1	Each
314	314	Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).	BI01010001010000000000000515BI0100001439
315	315	200 mm dia	BI01010001010000000000000515BI0100001440	1	Each
316	316	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work	BI01010001010000000000000515BI0100001441
317	317	25mm dia nominal bore	BI01010001010000000000000515BI0100001442	100	Metre
318	318	Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :	BI01010001010000000000000515BI0100001443
319	319	With common burnt clay F.P.S.(non modular) bricks of class designation 7.5	BI01010001010000000000000515BI0100001444	2	Each
320	320	Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :	BI01010001010000000000000515BI0100001445
321	321	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5	BI01010001010000000000000515BI0100001446	1	Each
322	322	Painting GI pipes and fittings with two coats of anti corrosive bitumestic paint of approved quality.	BI01010001010000000000000515BI0100001447
323	323	25mm dia nominal bore	BI01010001010000000000000515BI0100001448	100	Metre
324	324	Providing and filling sand of grading zone V or coarser grade alround the GI pipes in external work.	BI01010001010000000000000515BI0100001449
325	325	25mm dia nominal bore	BI01010001010000000000000515BI0100001450	90	Metre
326	326	Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.	BI01010001010000000000000515BI0100001451
327	327	25 mm nominal bore, 152mm long, weighing not less than 440 gms	BI01010001010000000000000515BI0100001452	1	Each
328	328	Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).	BI01010001010000000000000515BI0100001453	98.7	Cum
329	329	Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) :	BI01010001010000000000000515BI0100001454
330	330	Screened through sieve of I.S. designation 4.75 mm (@ 6%)	BI01010001010000000000000515BI0100001455	0.38	Cum
331	331	Fine dressing of the ground	BI01010001010000000000000515BI0100001456	350	Sqmt
332	332	Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and / or good earth to be paid separately).	BI01010001010000000000000515BI0100001457	99.08	Cum
333	333	Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge..	BI01010001010000000000000515BI0100001458	99.08	Cum
334	334	Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately).	BI01010001010000000000000515BI0100001459
335	335	In rows 5 cm apart in both directions	BI01010001010000000000000515BI0100001460	350	Sqmt
336	336	Supplying & Stacking of Selection No.1 Grass at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.	BI01010001010000000000000515BI0100001461	350	Sqmt
337	337	Non schedule items	BI01010001010000000000000515BI0100001462
338	338	Providing and fixing Tata Steel Pravesh Door (Hardware GEZE Make)Ball bearing butt hinge of size 102x75x3mm with screws in SSS- Dead Bolt (Mortise Dead Lock with Euro profike cylinder(Green), Concealed Flush Bolt (98307009), D - Handle(D-Both Side - Dia 19mmX254mm(L)Geze)	BI01010001010000000000000515BI0100001463
339	339	D1 (Tata Steel Door swings type of any size)(Double leaf)	BI01010001010000000000000515BI0100001464	57.6	SQM
340	340	D2 (Tata Steel Door swings type of any size)(Single leaf)	BI01010001010000000000000515BI0100001465	47.48	SQM
341	341	Providing & fixing Tata Steel window/aliding window	BI01010001010000000000000515BI0100001466
342	342	Of any size 27mm Series with Toughened Glass and with mesh shutter 2.5 Track	BI01010001010000000000000515BI0100001467	172.08	SQM
343	343	Supplying and fixing of Glass Fiber Reinforced Concrete Panel(GRC Panel) of approved brand and specifications including cartage till site and all taxes,as per approval of E-in-Charge.	BI01010001010000000000000515BI0100001468	66	Sqm.
344	344	Providing and fixing bib cock of approved quality :\nProviding and fixing brass bib cock of approved quality(Jaguar/Parryware) :15 mm nominal bore(Push type as per approval of E-in CHARGE)\n	BI01010001010000000000000515BI0100001469	14	Each
345	345	Providing and fixing C.P. brass angle cock/ valve for basin mixer , geyser points or to other similar fittings of approved quality conforming to IS:8931(Jaguar/Parryware) :15 mm nominal bore(Push type as per approval of E-in CHARGE\n	BI01010001010000000000000515BI0100001470	46	Each
346	346	Providing and fixing C.P. brass Pillar cock of approved quality in wash basin or other fittings as per requirement conforming to IS:8931(Parryware/Jaguar) :15 mm nominal bore(Push type as per approval of E-in CHARGE)\n	BI01010001010000000000000515BI0100001471	18	Each
347	347	Providing and fixing cast brass Floor Clean Out plug with suitable insert keys for opening, male threaded joint with G.I. socket lead caulked to soil pipe / waste pipe of C.I. and C.I.(LA) pipe as required complete as per instruction of the Engineer in charge.	BI01010001010000000000000515BI0100001472
348	348	100mm dia	BI01010001010000000000000515BI0100001473	4	Each
349	349	Providing and fixing Floor Drain as per requirement	BI01010001010000000000000515BI0100001474
350	350	100 mm x 50 mm	BI01010001010000000000000515BI0100001475	14	Each
351	351	Providing and fixing Floor trap P type/ S type as per requirement complete with GI hopper etc.	BI01010001010000000000000515BI0100001476
352	352	100mm dia	BI01010001010000000000000515BI0100001477	8	Each
353	353	Providing and fixing 25mm dia. G.I. air release valve, single acting including the cost of all pipes and fittings as per standard design and site conditions complete in all respects.	BI01010001010000000000000515BI0100001478	1	Each
354	354	Providing, fixing, testing and commissioning of Brass Housing PRV with balanced seat, standard pattern, set point scale, high quality synthetic material valve insert, SS wire mesh, NBR diaphragm, NBR seats, pressure gauge, complete as required in water supply drop pipes.	BI01010001010000000000000515BI0100001479
355	355	25mm dia	BI01010001010000000000000515BI0100001480	1	Each
356	356	Supply,Installation,Testing & Commissioning .of 2 Nos. support arms and backrest to mount at fixed height for handicap toilet as required. \n	BI01010001010000000000000515BI0100001481	1	Set
357	357	Supply,Installation,Testing & Commissioning .of raised toilet seat with cover for handicap toilet.(Make Parryware/Jaguar or approved by Engineer in charge)	BI01010001010000000000000515BI0100001482	1	Each
358	358	SITC in position of adjustable type white vitreous china wash basin for handicapped complete with tracks(IR 4360-Commander or equivalent) with C.I./M.S. brackets painted white, 32 mm C.P. brass waste, C.P. brass chain with rubber plug, 32mm dia C.P. cast brass bottle with extension piece, wall flanges and union complete including cutting and making good the walls floors wherever required.	BI01010001010000000000000515BI0100001483	1	Each
359	359	Supply,Installation,Testing & Commissioning .of 35 mm dia powder coated steel grab L-SHAPED CORNER RAIL(800MM+800MM) (for handicapped toilet).	BI01010001010000000000000515BI0100001484	3	Each
360	360	Providing and fixing of Health Foucet complete with all accessories including divertor, angle valve etc required for for complete successful commissioning.	BI01010001010000000000000515BI0100001485	1	Each
361	361	Testing Charges as per EMP	BI01010001010000000000000515BI0100001486
362	362	Pre Construction Stage	BI01010001010000000000000515BI0100001487
363	363	Environmental Baseline Data Generation (Pre Construction Stage)	BI01010001010000000000000515BI0100001488
364	364	Ambient Air Quality Test	BI01010001010000000000000515BI0100001489	1	Each
365	365	Noise Level Test	BI01010001010000000000000515BI0100001490	1	Each
366	366	Drinking Water Quality Test	BI01010001010000000000000515BI0100001491	1	Each
367	367	Construction Stage	BI01010001010000000000000515BI0100001492
368	368	Environmental Monitoring (Construction Stage)	BI01010001010000000000000515BI0100001493
369	369	Ambient Air Quality Test	BI01010001010000000000000515BI0100001494	3	Each
370	370	Noise Level Test	BI01010001010000000000000515BI0100001495	3	Each
371	371	Drinking Water Quality Test	BI01010001010000000000000515BI0100001496	3	Each
372	372	Dust Suppression	BI01010001010000000000000515BI0100001497
373	373	Dust Suppression at Site ( Assumption @ 2 hours/ day or as and when required)	BI01010001010000000000000515BI0100001498	100	Hrs
374	374	Septic Waste Cleaning	BI01010001010000000000000515BI0100001499
375	375	Approximately 3000 Litres in One Tanker (3 Tankers shall be required as per EMP)	BI01010001010000000000000515BI0100001500	10	per KL
376	376	Capacity Building	BI01010001010000000000000515BI0100001501
377	377	Training at Site for Implementation of EHS	BI01010001010000000000000515BI0100001502	1	Job
378	378	Illuminated signages	BI01010001010000000000000515BI0100001503	50.7	Sqmt
379	379	Supply Installation, Testing & Commissioning of Horizontal Submersible Pump of capacity 2 lpm having head of 20 meter.	BI01010001010000000000000515BI0100001504	1	Each
380	380	Mobilization and transportation of drilling equipment and ancillary equipment to and from site including erection and setting up the plant and dismantling after completion.	BI01010001010000000000000515BI0100001505	2	LS
381	381	Providing & Fixing Steel Wire Fabric complete in all respect.	BI01010001010000000000000515BI0100001506	21.21	Sqm
382	382	Charges for water analysis as per IS:10500 of tubewell water from approved laboratory including Phsical, Chemical and becteriological tests complete.	BI01010001010000000000000515BI0100001507	1	LS
383	383	'Supply and installation of fully submersible type multi-stage tubewell pump with stainless steel body/impellers and water cooled motor suitable for 400/440 Volts, 3 phase, 50 cycles AC supply including submersible cable from pump setting level to Electrical panel (Location to be provided by client) complete in all respects. Capacity of Pump=200 lpm, Head=200 mtr.	BI01010001010000000000000515BI0100001508	1	Each
384	384	Providing and fixing dust & vermin proof cubicle type motor control centre fabricated from powder coated 16 SWG MS sheet comprising of:\n'Incomer:\n'One incoming main isolation TP& Neutral link MCCB of 63/100 A rating\n'One fully taped aluminium bus bar of 100A capacity in separate bus bar chamber.\n'One square panel type Voltmeter reading 0-500 V with rotary selector switch for reading voltage between phases.\n'One panel type Ampere meter with selector switch and CT\n'3 phase indication lights\n'Outgoing\n'2 nos. DOL Starter suitable for 10.0 HP. (1 working+1 standby)\n'2 nos. single phase preventors of suitable rating one for each motor\n'2 nos. 32A/100A TP & Neutral link MCCB one for each motor\n'1 nos. 32A/100A TP & Neutral link MCCB for air compressor.\n'2 nos. rotary type auto/manual off selector switch.\n'Space for 2 Nos. liquid level controller\n'Appropriate etched aluminium identification plate for each starter/switch.\n'Colour coded internal wiring from main to bus bar, switchgear, starters, indicating lAmps complete in all respects.\n	BI01010001010000000000000515BI0100001509	1	Set
385	385	'Providing and fixing liquid level controller for pumps including probes, wiring, cable, conduit and making connection to pump panel complete in all respect and making system functional. One set of sensors at high level of UG water tank to cut-off pumpand One set of sensors at low level of UG water tank to auto start the pump.	BI01010001010000000000000515BI0100001510	1	Each
386	386	'Providing PVC insulated, flat submersible cables 1100V grade Supply of Flat Power cable 4 core 10 sqmm. For tubewell.	BI01010001010000000000000515BI0100001511	206	RM
387	387	Electrical Works	BI01010001010000000000000515BI0100001512
388	388	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.	BI01010001010000000000000515BI0100001513
389	389	Group B	BI01010001010000000000000515BI0100001514	407	Point
390	390	Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /\nrecessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable\netc. as required.	BI01010001010000000000000515BI0100001515	20	Point
391	391	Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop\nearthing as required.	BI01010001010000000000000515BI0100001516	1400	Mtr
392	392	Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired.	BI01010001010000000000000515BI0100001517
393	393	2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire	BI01010001010000000000000515BI0100001518	1375	Mtr
394	394	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire	BI01010001010000000000000515BI0100001519	1275	Mtr
395	395	2 X 6 sq. mm + 1 X 6 sq. mm earth wire	BI01010001010000000000000515BI0100001520	630	Mtr
396	396	4 X 6 sq. mm + 2 X 6 sq. mm earth wire	BI01010001010000000000000515BI0100001521	510	Mtr
397	397	4 X 10 sq. mm + 2 X 6 sq. mm earth wire	BI01010001010000000000000515BI0100001522	180	Mtr
398	398	4 X 16 sq. mm + 2 X 6 sq. mm earth wire	BI01010001010000000000000515BI0100001523	150	Mtr
399	399	Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/\nrecessed steel/ PVC conduit as required.	BI01010001010000000000000515BI0100001524
400	400	2 x 1.5 sq. mm	BI01010001010000000000000515BI0100001525	1730	Mtr
401	401	Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.	BI01010001010000000000000515BI0100001526
402	402	4 Pair	BI01010001010000000000000515BI0100001527	640	Metre
403	403	Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same\nin case of recessed conduit as required.	BI01010001010000000000000515BI0100001528
404	404	20 mm	BI01010001010000000000000515BI0100001529	800	Mtr
405	405	25 mm	BI01010001010000000000000515BI0100001530	3936	Mtr
406	406	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including\ncutting the wall and making good the same in case of recessed\nconduit as required.	BI01010001010000000000000515BI0100001531
407	407	20 mm	BI01010001010000000000000515BI0100001532	500	Mtr
408	408	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.	BI01010001010000000000000515BI0100001533
409	409	5/6 A switch	BI01010001010000000000000515BI0100001534	130	Each
410	410	15/16 A switch	BI01010001010000000000000515BI0100001535	8	Each
411	411	3 pin 5/6 A socket outlet	BI01010001010000000000000515BI0100001536	130	Each
412	412	6 pin 15/16 A socket outlet	BI01010001010000000000000515BI0100001537	8	Each
413	413	Telephone socket outlet	BI01010001010000000000000515BI0100001538	16	Each
414	414	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.	BI01010001010000000000000515BI0100001539	133	Each
415	415	Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.	BI01010001010000000000000515BI0100001540
416	416	1 or 2 Module (75mmX75mm)	BI01010001010000000000000515BI0100001541	16	Each
417	417	6 Module (200mmX75mm)	BI01010001010000000000000515BI0100001542	55	Each
418	418	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.	BI01010001010000000000000515BI0100001543	4	Each
419	419	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and\nfixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.	BI01010001010000000000000515BI0100001544	56	Each
420	420	Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.	BI01010001010000000000000515BI0100001545	323	Each
421	421	Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, LED Fixtures, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.	BI01010001010000000000000515BI0100001546	263	Each
422	422	Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5\nsq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.	BI01010001010000000000000515BI0100001547	133	Each
423	423	Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.	BI01010001010000000000000515BI0100001548
424	424	Upto 450 mm sweep	BI01010001010000000000000515BI0100001549	11	Each
425	425	Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.	BI01010001010000000000000515BI0100001550	11	Each
426	426	Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.	BI01010001010000000000000515BI0100001551
427	427	1 run of cable	BI01010001010000000000000515BI0100001552	1950	Metre
428	428	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted\nincluding earthing etc. as required. (But without MCB/RCCB/Isolator)	BI01010001010000000000000515BI0100001553
429	429	4 way (4 + 12), Double door	BI01010001010000000000000515BI0100001554	1	Each
430	430	6 way (4 + 18), Double door	BI01010001010000000000000515BI0100001555	8	Each
431	431	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of\nfollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.	BI01010001010000000000000515BI0100001556
432	432	Single pole	BI01010001010000000000000515BI0100001557	156	Each
433	433	Triple pole	BI01010001010000000000000515BI0100001558	22	Each
434	434	Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and\ncommissioning etc. as required.	BI01010001010000000000000515BI0100001559
435	435	40 A	BI01010001010000000000000515BI0100001560	4	Each
436	436	63 A	BI01010001010000000000000515BI0100001561	5	Each
437	437	Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top\nalongwith 20 A \"C\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out\nlet and complete with connections, testing and commissioning\netc. as required.	BI01010001010000000000000515BI0100001562	21	Each
438	438	Supplying and fixing 30 A/32A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top\nalongwith 30 A/32A \"C\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out\nlet and complete with connections, testing and commissioning\netc. as required.	BI01010001010000000000000515BI0100001563	18	Each
439	439	Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.	BI01010001010000000000000515BI0100001564
440	440	150 mm width X 50 mm depth X 1.6 mm thickness	BI01010001010000000000000515BI0100001565	200	RM
441	441	Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays bends with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.	BI01010001010000000000000515BI0100001566
442	442	150 mm width X 50 mm depth X 1.6 mm thickness	BI01010001010000000000000515BI0100001567	40	Each
443	443	Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays tees with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.	BI01010001010000000000000515BI0100001568
444	444	150 mm width X 50 mm depth X 1.6 mm thickness	BI01010001010000000000000515BI0100001569	40	Each
445	445	Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays cross members with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.	BI01010001010000000000000515BI0100001570
446	446	150 mm width X 50 mm depth X 1.6 mm thickness	BI01010001010000000000000515BI0100001571	40	Each
447	447	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.	BI01010001010000000000000515BI0100001572	14	set
448	448	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.	BI01010001010000000000000515BI0100001573	3	set
449	449	Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)	BI01010001010000000000000515BI0100001574	70	mtr
450	450	Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/\nterminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)	BI01010001010000000000000515BI0100001575	15	mtr
451	451	Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.	BI01010001010000000000000515BI0100001576	75	mtr
452	452	Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.	BI01010001010000000000000515BI0100001577	150	mtr
453	453	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.	BI01010001010000000000000515BI0100001578	200	mtr
454	454	Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with\n85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.	BI01010001010000000000000515BI0100001579	2	Each
455	455	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as\nrequired.(For horizontal run)	BI01010001010000000000000515BI0100001580	350	mtr
456	456	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as\nrequired.(For vertical run)	BI01010001010000000000000515BI0100001581	80	mtr
457	457	Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck\nnuts and spring washers etc. complete as required.	BI01010001010000000000000515BI0100001582	10	Each
458	458	Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.	BI01010001010000000000000515BI0100001583	30	Mtr
459	459	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing\nRCC/ HUME/ METAL pipe/existing open trence/as required.	BI01010001010000000000000515BI0100001584
460	460	Above 35 sq. mm and upto 95 sq. mm	BI01010001010000000000000515BI0100001585	260	Mtr
461	461	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size\non wall surface and overhead as required.	BI01010001010000000000000515BI0100001586
462	462	Upto 35 sq. mm (clamped with 1mm thick saddle)	BI01010001010000000000000515BI0100001587	50	Mtr
463	463	Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm\nMS flat clamp)	BI01010001010000000000000515BI0100001588	70	Mtr
464	464	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated\nand PVC sheathed / XLPE aluminium conductor cable of 1.1 KV	BI01010001010000000000000515BI0100001589
465	465	3½ X 35 sq. mm (32mm)	BI01010001010000000000000515BI0100001590	8	each
466	466	3½ X 70 sq. mm (38mm)	BI01010001010000000000000515BI0100001591	2	each
467	467	3½ X 185 sq. mm (45mm)	BI01010001010000000000000515BI0100001592	2	each
468	468	4 X 10 sq. mm (25mm)	BI01010001010000000000000515BI0100001593	22	each
469	469	Erection of metallic/octagonal pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling\netc. as required.	BI01010001010000000000000515BI0100001594
470	470	Above 4.5 metre and upto 6.5 metre	BI01010001010000000000000515BI0100001595	10	each
471	471	Providing and making steel pole collar with cement concrete (1cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted)	BI01010001010000000000000515BI0100001596	3.6	cum
472	472	Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.	BI01010001010000000000000515BI0100001597
473	473	40 mm dia	BI01010001010000000000000515BI0100001598	40	mtr
474	474	Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.	BI01010001010000000000000515BI0100001599	133	Nos.
475	475	Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required.	BI01010001010000000000000515BI0100001600
476	476	100 mm dia	BI01010001010000000000000515BI0100001601	190	Metre
477	477	150 mm dia	BI01010001010000000000000515BI0100001602	70	Metre
478	478	Supplying and laying of following size DWC HDPE pipe ISI markedalong with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) includingexcavation and refilling the trench but excluding sand cushioning\nand protective covering etc., complete as required.	BI01010001010000000000000515BI0100001603
479	479	63 mm dia (OD-63 mm & ID-51 mm nominal)	BI01010001010000000000000515BI0100001604	150	meter
480	480	Supply, installation, testing and commissioning of following ennealed tinned electric grade copper conductor PVC insulated and PVC sheathed jelly filled armoured telecommunication cable as per specifications.	BI01010001010000000000000515BI0100001605
481	481	10 pair armoured riser cable of 0.60 mm dia copper conductor	BI01010001010000000000000515BI0100001606	100	Metre
482	482	20 pair armoured riser cable of 0.60 mm dia copper conductor	BI01010001010000000000000515BI0100001607	50	Metre
483	483	Supply and installation, testing and commissioning following size KRONE make telephone tag block in lockable 16 gauge sheet medium duity PVC enclosure complete as required.	BI01010001010000000000000515BI0100001608
484	484	10 pair Krone type tag block	BI01010001010000000000000515BI0100001609	2	Nos.
485	485	20 pair Krone type tag block	BI01010001010000000000000515BI0100001610	1	Nos.
486	486	50 pair Krone type tag block	BI01010001010000000000000515BI0100001611	1	Nos.
487	487	Supply and fixing of 4 way VTPN DB IP 43, IK09 with metal door suitable for flush or surface mounting with provistion of 4 pole mccb incomer and all respept accessories as required.	BI01010001010000000000000515BI0100001612	4	NOS.
488	488	Supply and fixing of 8 way VTPN DB IP 43, IK09 with metal door suitable for flush or surface mounting with provistion of 4 pole mccb incomer and all respept accessories as required.	BI01010001010000000000000515BI0100001613	1	NOS.
489	489	Supply and fixing of 4 pole 100 amp 25 KA MCCB, Ics=Icu=100% with one side spreader links in existing VTPN DB as required.	BI01010001010000000000000515BI0100001614	4	NOS.
490	490	Supply and fixing of 4 pole 200 amp 25 KA MCCB Ics=Icu=100% with one side spreader links in existing VTPN DB as required.	BI01010001010000000000000515BI0100001615	1	NOS.
491	491	Supply of 20 Watt LED Linear Metal Construction commercial batten fitting with fuse protection suitable for Polycarbonate diffuser & aluminium heat sink complete suitable for both surface & suspended Mounting, complete in all respect 2000 system lumens PF>0.95, THD<10%, CRI>80, Sheet Thickness 0.8mm, Average Life 40000hrs @L70 with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge., Make Philips BN021C LED20S PSU CW GR S2 or eqivalent as per approved make	BI01010001010000000000000515BI0100001616	71	NOS.
492	492	\nSupply of surface/Suspended commercial LED batten made of extruded aluminium housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt with Minimum system Lumens 4000 with maximum input power of 40Watt. , CCT of 6500/4000K (SDCM<=5) , CRI >80, PF >0.9, an operating Voltage Range of 140 - 270 VAC.The luminaire should be flicker free. Luminaire manufacture shall provide LM79 report from NABL accredited lab & LM80 report issued by LED manufacturer with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge.,. Similar to Philips BN100C LED40S-6500 PSU L120 GR or eqivalent as per approved make	BI01010001010000000000000515BI0100001617	24	NOS.
493	493	Supply of surface/Suspended LED industrial batten made of CRCA housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=120lumens/watt with Minimum system Lumens 4000 with maximum input power of 34 - 40Watt. Life of fixture (Including Driver) : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 6500K (SDCM<=4) , CRI >80, PF >0.95 & THD<10%, an operating Voltage Range of 130 - 320 VAC.Minimum Internal Surge Protection 4KV & , the fixture design should comply with EMC / EMI compliance along with BIS certification for LED Driver & Luminaire seperately. The luminaire should be flicker free (Ripple<5%). Luminaire manufacture shall provide LM79 report from NABL accredited lab & LM80 report issued by LED manufacturer with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge. Similar to Philips BN308C LED40S-6500 L120 PSU WH or eqivalent as per approved make	BI01010001010000000000000515BI0100001618	84	NOS.
494	494	Supply of LED indoor surface downlighter suitable for general lighting. Luminaire should have polycarbonate cover with diffused optics. The luminaire should have CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 classification.The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of approx 2000 lumens and maximum system wattage of 18 Watts.power factor >0.95 , THD <10%. he fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Similar to PHILIPS make SM251C LED20S- 6500 PSU WH or eqivalent as per approved make.	BI01010001010000000000000515BI0100001619	84	NOS.
495	495	Supply of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required, in case of rode length exceed more that 30 cm then fixing clamps, nut, bolts and fixing arrangement with both side in existing steel conduit/MS pipe as directed by engineer in charge.	BI01010001010000000000000515BI0100001620	133	NOS.
496	496	Supply of Exhaust fan 300 mm sweep metal body with 50 HZ 230 volt ac complete with all respective accessories.	BI01010001010000000000000515BI0100001621	11	NOS.
497	497	Dismantling existing electrical accessories like switch boards, switches, ceiling fans, DB's, wiring etc. by manual means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge of complete project.	BI01010001010000000000000515BI0100001622	1	Lot
498	498	Supplying, installation, testing & commissioning of modular, fully bolted type, sectionallised Low Voltage Panel suitable for 415 V, 3 Phase, 4 wire 50 Hz AC supply system as per standard IEC 61439- 1 &2 as Total Type Tested Assembly and of suitable size fabricated in compartmentalized design with CRCA sheet steel of 2mm thick for load bearing member and 1.6mm for Non load bearing member. 3mm thick for gland plates. i/c cleaning & finishing complete with 9 tank process (automatic PT spray) for powder coating in approved shade, having suitable rating capacity extensible type TPN Aluminium bus bars of high conductivity as per BOQ, bus bar supports, with short circuit withstand capacity of 50kA for 1 Sec., bottom base frame of 3mm thick (multifold design), fabrication shall be done in trasportable sections, entire LENGTH panel shall have a common earth bar at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of bus bars/Copper Cables and control wiring with 2.5 Sq.mm. PVC insulated copper FRLS conductor S/C cable for voltage & Current respectively, cable alleys, i/c providing following switch gears , Panel shall be suitable for Internal Arc Test 50kA for 400mS as per IEC61641 and Siesmic Zone-IV tested , Mechanical Impact IK08-IK10 as per IEC, ACBs shall have Temperature protection for release & having display with battery backup and 20Faults Trip History : ( The board shall be dust and vermin proof with degree of protection IP 42 )\n	BI01010001010000000000000515BI0100001623
499	499	INCOMER:	BI01010001010000000000000515BI0100001624
500	500	1 nos. 1000A 415V, Ics=Icu=Icw=50KA, 4P ACB with MP release with LCD display having O/L, S/C , G/F Over temperature and neutral failure protection, release should have minimum 10 Nos fault history for diagnosis of fault,	BI01010001010000000000000515BI0100001625
501	501	1 nos. Digital type multi function meters (V+A+Hz) with cast resin CTs 1000/5A.	BI01010001010000000000000515BI0100001626
502	502	1 Set of phase indicating lamp with MCB	BI01010001010000000000000515BI0100001627
503	503	1 No. 1000A, 4pole onload changeover switch.	BI01010001010000000000000515BI0100001628
504	504	BUSBAR	BI01010001010000000000000515BI0100001629
505	505	1000A TPN Bus bar of aluminimum alloy.	BI01010001010000000000000515BI0100001630
506	506	OUTGOING	BI01010001010000000000000515BI0100001631
507	507	1 nos. 250A, 415V, FP MCCB of 36kA.with adjustable O/L and S/C protection	BI01010001010000000000000515BI0100001632
508	508	4 nos. 125A, 415V, FP MCCB of 25kA.with adjustable O/L and S/C protection.	BI01010001010000000000000515BI0100001633
509	509	1 nos. 63A, 415V, FP MCCB of 25kA.with adjustable O/L and S/C protection.	BI01010001010000000000000515BI0100001634
510	510	5 nos. 40A, 415V, 4P MCB of 10kA.with O/L and S/C protection.	BI01010001010000000000000515BI0100001635
511	511	6 nos. 63A, 415V, 4P MCB of 10kA.with O/L and S/C protection.	BI01010001010000000000000515BI0100001636
512	512	4 nos. 32A, 230V, 2P MCB of 10kA.with O/L and S/C protection.	BI01010001010000000000000515BI0100001637
513	513	Incommer for APFC Section 1 nos. 400A, 415V, FP MCCB of 36kA.with adjustable O/L and S/C protection.	BI01010001010000000000000515BI0100001638
514	514	1 nos. Digital type multi function meters (V+A+Hz) with cast resin CTs 1000/5A.	BI01010001010000000000000515BI0100001639
515	515	1 Set of phase indicating lamp with MCB	BI01010001010000000000000515BI0100001640
516	516	1 No. APFC Relay suitable for controlling of 12 Nos relay output.	BI01010001010000000000000515BI0100001641
517	517	250KVAR Capacitor Bank in 12 steps having MCB/MCCB for protection, Contactors as per AC6 Duty for automatic switching, having auto manual switch and indication for each step.	BI01010001010000000000000515BI0100001642	1	NOS.
518	518	Supply and Erecting modular type computer jack RJ 45 with screwless connector approved make with mounting plate and box with wiring connections complete.	BI01010001010000000000000515BI0100001643	39	NOS.
519	519	Supplying & fixing of 6 Core - Optic fiber cable OM4 - Unitube Corrugated steel tape Optical Fiber Cable as per IEC 60794-1	BI01010001010000000000000515BI0100001644	200	Mtr
520	520	Supplying & fixing of U/ UTP, Cat 6 A Cable as per ANSI/TIA 568C.2 at 500 to 600 MHz suitable for (Complete in all respect) cctv	BI01010001010000000000000515BI0100001645	2000	Mtr
521	521	Supply and fixing of 2 Zone Conventional Fire Alarm Control Panel , Panel Operating Voltage :AC 220v 50Hz #10%, DC 24v 1 amp Operating Temperature :0º C to 50º (176)C Operating Humidity :95% (non-condensing)\nHooter output :2A (24v DC) ,EOL :4k7 ohm, 1 per Zone, Construction :1.8mm CRCA sheet duly powder Coated ,\n16 * 2 character LCD Display , Extra potential free contact for fire & fault ,Auto dialer connectivity facility ,Inbuilt battery charger & battery space facility ,Reset, alarm cancel, lamp test feature,Zone wise test and isolation facility\n,Protected from Hi-voltage, over-load, short-circuit, Zone wise LED indications for fire, open and short.	BI01010001010000000000000515BI0100001646	1	NOS.
522	522	Supply and fixing of High intensity Sounder with mounting base.	BI01010001010000000000000515BI0100001647	6	NOS.
523	523	Providing , installation , testing & commissioning of Glass Break Type Manual Call Point	BI01010001010000000000000515BI0100001648	6	NOS.
524	524	Supply of following sizes of XLPE insulated Aluminum Armoured cable, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS code and technical specifications.	BI01010001010000000000000515BI0100001649
525	525	4CX10 SQMM AL ARMOURD CABLE	BI01010001010000000000000515BI0100001650	196	Mtr
526	526	3.5CX35 SQMM AL ARMOURD CABLE	BI01010001010000000000000515BI0100001651	200	Mtr
527	527	3.5CX70 SQMM AL ARMOURD CABLE	BI01010001010000000000000515BI0100001652	50	Mtr
528	528	3.5CX185 SQMM AL ARMOURD CABLE	BI01010001010000000000000515BI0100001653	80	Mtr
529	529	Supply of LED street light fitting not more than 30W having System Efficacy >120 lm/W, system output >3600Lumens, THD <10%, Power Factor >0.95, CRI >70, CCT 5700, Full IP 66 ( with out Glue) protected single piece die cast aluminium housing having toughned glass/PC with Impact resistance IK07. LED driver should be Fully metal body Potted & Encapsulated . BIS compliant driver should sustain 440V Stress Voltage protection for 8 Hrs., High Cut off : 325V(+/- 15V) and should have feature of Auto Restart. Driver shall have 4KV Surge protection and feasibility of 10KV external SPD housed in Luminiare and confirming standard IEC60598. Including suitable size GI pipe bracket clamps, nut, bolts and washers complete all as directed. Make : PHILIPS cat. part no. BRP046 LED 36 CW MR S1 PSU GR or eqivalent as per approved make	BI01010001010000000000000515BI0100001654	10	NOS.
530	530	Supply of 5.0 Mtr Height Galvanized Iron OctagonalPoles having uniformly tapered polygonal shape throughout the length with straightLongitudinal welding in a single shaft. There shall not be any circumferential welding. Dimensions:Top Dia.: 70mm, Bottom Dia.: 130mm, Thickness 3mm &Base plate 20020012 mm. Dimension of Foundation Bolts - Length 600mm, Dia. 24mm &04 Nos. Bolts manufactured from special steel along with nuts, washer, anchor plates & Templates. SingleArm of 0.5 Mtr. Shall be provided along with – MAKE PHILIPS or eqivalent as per approved make.	BI01010001010000000000000515BI0100001655	10	NOS.
531	531	Safety Equipments & Accessories	BI01010001010000000000000515BI0100001656
532	532	Supplying & laying 1.1 kv grade ISI marked synthetic rubber mats as per specifications of chief electrical inspectorate.	BI01010001010000000000000515BI0100001657	8	RM
533	533	Supplying & fixing of shock treatment chart printed in hindi and english fitted in wooden frame and glass at front side and hard board at back side.	BI01010001010000000000000515BI0100001658	8	Nos
534	534	Supplying & fixing in position 1.1 kv rubber hand gloves.	BI01010001010000000000000515BI0100001659	4	Set
535	535	Supplying of first aid box as approved by St. John Ambulance Brigade/Indian Red Cross conforming to IS : 2217 - 1963.	BI01010001010000000000000515BI0100001660	6	Nos
536	536	Supplying of basic Electrical and mechanical maintenance tool kit as per direction of engineer In charge.	BI01010001010000000000000515BI0100001661	2	Nos
537	537	Fire Fighting	BI01010001010000000000000515BI0100001662
538	538	Supply,installation,testing and commissioning of MS C class Heavy duty pipe Inclueding forged fitting such as bends, tees, reducers,welding rods,two cote red oxide peimer and one cote post office red paint,angle,fastnor,two cote black japan etc. as follow	BI01010001010000000000000515BI0100001663
539	539	100 mm line (approx.) C Class	BI01010001010000000000000515BI0100001664	54	Mtr.
540	540	80mm line (approx.) C Class	BI01010001010000000000000515BI0100001665	6	Mtr.
541	541	25mm line (approx.) C Class	BI01010001010000000000000515BI0100001666	12	Mtr.
542	542	SITC of wrapping coating of pipe line in trenches	BI01010001010000000000000515BI0100001667	30	Mtr
543	543	Supply,installation, testing and commissioning of single headed landing valve of 63mm dia. Made of SS hydrant valve complete with necessary fitting.	BI01010001010000000000000515BI0100001668	1	Nos.
544	544	Supply,installation, testing and commissioning of RRL Hose pipe with 63mm dia. and 15mtr.length with SS male and female couplings.	BI01010001010000000000000515BI0100001669	2	Nos.
545	545	Supply,installation, testing and commissioning of 63mm dia. SS short branch pipe nozzle suitable for instantaneous connection to hose coupling as required.	BI01010001010000000000000515BI0100001670	1	Nos.
546	546	Supply,installation, testing and commissioning of MS hose box keeping two no.of RRL hose pipe and one no.of short branch pipe.	BI01010001010000000000000515BI0100001671	1	Nos.
547	547	Supply,installation, testing and commissioning of two way fire brigade inlet connection suitable for local fire tender complete as required.	BI01010001010000000000000515BI0100001672	1	Nos.
548	548	Supply,installation,testing and commissioning of swinging type first aid fire hose reel of 20mm internal dia and 30 mtr long with MS drum and 5mm shut of nozzle complete with fitting complete as required.	BI01010001010000000000000515BI0100001673	3	Nos.
549	549	Supply,installation,testing and commissioning of gun matel body air release valve complete with all fitting as equired like ball vlave,holdtite,suta etc.	BI01010001010000000000000515BI0100001674	1	Nos.
550	550	Supply,installation,testing and commissioning of Cast Iron body Butterfly Valve complte with all fitting as requied like MS flange, nut bolts,washers etc.	BI01010001010000000000000515BI0100001675
551	551	100 mm	BI01010001010000000000000515BI0100001676	3	Nos.
552	552	Supply,installation,testing and commissioning of Cast Iron body Non return valve complte with all fitting as requied like MS flange, nut bolts,washers etc.	BI01010001010000000000000515BI0100001677
553	553	100 mm	BI01010001010000000000000515BI0100001678	2	Nos.
554	554	Supply,installation,testing and commissioning of Pressure Gauge. (0-10kg).	BI01010001010000000000000515BI0100001679	1	Nos.
555	555	Supply,laying,testing and commissioning of alluminium armoud cable complete with all fitting as required like lugs,glands etc.of following sizes:	BI01010001010000000000000515BI0100001680
556	556	16mm x 4core. From pump electric panel to fire pump .	BI01010001010000000000000515BI0100001681	40	Mtr.
557	557	Supply,installation,testing and commissioning of gun matel body Ball Valve.25mm dia.	BI01010001010000000000000515BI0100001682	5	Nos.
558	558	Supply,installation,testing and commissioning of pressure switch (maximum pressure range 10kg/sq high)for hydrant stand by and jocky pumps, complete as required.	BI01010001010000000000000515BI0100001683	1	Nos.
559	559	Supply,installation,testing and commissioning of air vashal tank complete with all fitting like air release valve,ball valve,MS Flanges,holdtite,suta etc.(200mm dia x 2000mm length).	BI01010001010000000000000515BI0100001684	1	Nos.
560	560	Supply,installation,testing and commissioning of Terrace tank made of zinc aluminium sheet and plastic lining 10,000 Ltr	BI01010001010000000000000515BI0100001685	1	Nos.
561	561	Connection of terrace tank with existing water supply line	BI01010001010000000000000515BI0100001686	1	Job
562	562	Supplying,Installatoin,Testing,& Commissioning of Terrace pumps of 450 lpm @ 45 mtr head	BI01010001010000000000000515BI0100001687	1	Nos.
563	563	Supply, installation, testing and commissioning of starter for terrace pumps	BI01010001010000000000000515BI0100001688	1	Nos.
564	564	RCC Hole Cutting	BI01010001010000000000000515BI0100001689	3	Nos.
565	565	Digging of underground line	BI01010001010000000000000515BI0100001690	30	Mtr.
566	566	Providing and fixing anti vivration mounting for pipe line	BI01010001010000000000000515BI0100001691
567	567	100 mm dia	BI01010001010000000000000515BI0100001692	1	pc
568	568	FIRE EXTINGUISHERS	BI01010001010000000000000515BI0100001693
569	569	Supply and installation of ABC powder stored pressure type portable fire extinguisher ISI marked 15683- 2006 & ISO - 9001, complete as required capacity - 6 kg	BI01010001010000000000000515BI0100001694	9	pc
570	570	Supply and installation of CO2 type fire extinguisher ISI marked steel body 15683- 2006 & ISO - 9001, complete as required capacity - 4.5 kg	BI01010001010000000000000515BI0100001695	9	pc
571	571	Supply and installation of Mechanical Foam (AFFF) type fire extinguisher ISI marked steel body 15683- 2006 & ISO - 9001, complete as required capacity - 9 ltr	BI01010001010000000000000515BI0100001696	3	pc
572	572	Supply,installation of fire Bucket as per IS spacification with stand (holding four bucket).	BI01010001010000000000000515BI0100001697	2	set
573	573	Supply, Installation, Testing and Commissioning of 3 HP Electric Driven Fire Pump suitable for auto/maual operation & consisting of following: complete in all respect like pump, motor, coupling etc.	BI01010001010000000000000515BI0100001698	2	Set
574	574	Fabrication, Supplying, Installation, Testing & Commissioning of Starter for Pumps	BI01010001010000000000000515BI0100001699	2	pc
575	575	SITC of Cable for pump 4cx6 mm Aluminium armoured	BI01010001010000000000000515BI0100001700	30	Mtr
576	576	SITC of Foot Valve	BI01010001010000000000000515BI0100001701	2	Nos.
577	577	Supply and fixing of GI line of 50 mmdia for pump room	BI01010001010000000000000515BI0100001702	12	Mtr
578	578	Supply,installation,testing and commissioning of Cast Iron body Butterfly Valve complte with all fitting as requied like MS flange, nut bolts,washers etc.	BI01010001010000000000000515BI0100001703	2	Mtr

Also Visit

Tenders

Uttarakhand Tenders

Construction Tenders

Turnkey Projects Tenders

Infrastructure Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Renovation And Upgradation Of Infrastructure Of Giti At Dugadda , Distt . Pauri Garhwal Uttarakhand, Duggada Kotdwar-Uttarakhand

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Renovation And Upgradation Of Infrastructure Of Giti At Dugadda , Distt . Pauri Garhwal Uttarakhand, Duggada Kotdwar-Uttarakhand

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us