Supplying Installation Testing And Commissioning Of Exhaust Air Wet Scrubber In Canteen Area At Guru Govind Singh Govt . Hospital Raghubir Nagar , New Delhi
Tender Value
4.87 Lakhs
Estimated cost
Bid Submission
05 Jan 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Guru Gobind Singh Govt. Hospital, Raghubir Nagar → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supplying Installation Testing And Commissioning Of Exhaust Air Wet Scrubber In Canteen Area At Guru Govind Singh Govt . Hospital Raghubir Nagar , New Delhi
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Dec-2020 | LIST OF APPROVED MATERIALS | Other | 05-Jan-2021 |
BOQ
| Name of Work: Supplying Installation Testing and Commissioning of Exhaust Air Wet Scrubber in Canteen Area at Guru Govind Singh Govt. Hospital Raghubir Nagar, NEw Delhi | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supplying, Installation, Testing and Commissioning of double skin cabinet type Exhaust air wet scrubber unit constructed of 0.63 (NS) mm thick pre plasterised powder coated outer sheet and 0.63 (NS) mm Plain G.I. inner sheet with 25 mm thick PUF insulation of density 40 Kg/cum in between. Comprising of blower section with backward curved DIDW centrifugal blower 65 mm static pressure, drive set, V-Belt driven by suitable HP rating TEFC squirrel cage weather proof motor. Double bank Spray nozzle system with eliminator & GI Intake Louver, suitable size pump, stainless steel sump with brass screen, inter-connecting G.I. pipe. Filters section with Al./ synthetic filters of 90% down to 10 micron efficiency, motors shall be suitable for 415 + 10% volts, 3 phase, 50 Hz, A.C. supply to suit humid conditions, complete with all accessories such as make-up, drain, over flow, quick fill valves, float valve, vibration isolators, foundations bolts complete etc as reqd. \n(i) Capacity 6000 CFM\n | 1 | job | |
| 2 | 2 | Providing, Supplying & fabricated Exhaust hood duly constructed with superior quality Stainless steel 18G SS 304 with standard viscous filters with grease gutter on rear and side in each piece and flushed led light with tough end glass and 600 lux light through out the hood complete with ceiling hangers, rods, angles and heat resistance wiring complete etc as reqd | |||
| 3 | 2.01 | 2000mm x 600mm x 450mm with 3 filters | 2 | nos | |
| 4 | 2.02 | 1200mm x 600mm x 450mm with 2 filters | 1 | nos | |
| 5 | 3 | Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required | |||
| 6 | 3.01 | Thickness 0.63 mm Sheet | 100 | sqm | |
| 7 | 3.02 | Thickness 0.80 mm Sheet | 20 | sqm | |
| 8 | 4 | Supplying, fixing, testing and commissioning fire retardant double canvas flexible connections suitable for 6000 CFM capacity unit complete etc. as reqd. | 1 | no | |
| 9 | 5 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. | |||
| 10 | 5.01 | E.R.W. tubes/ I Section Steel Beams | 80 | kg | |
| 11 | 6 | Supplying, Installation, Testing & Commissioning of dust, damp and vermin proof outdoor free standing cubical compartmentalized type, sheet steel panel suitable for operation of 415± V 10 %, 50 Hz, AC 3 phase 4 wire supply system fabricated out of CRCA sheet of 2 mm thick i/c cleaning and finishing compete with powder coating in approved shade, having 100 Amp capacity type TPN Aluminium alloy bus bars of high conductivity DMC/ SMC bus bar supports, inter connection with solid copper conductor wire / Al. strips, neutral link including control wiring with 2.5 Sqmm PVC insulated copper conductor FRLS coppr conductor S/C cable, cable gland plates in two half, necessary metering protections and indications and mounted with the following switch gears & accessories with proper earthing complete etc. as reqd. not less than 300 mm deep. | 1 | sqm | |
| 12 | 7 | Supplying & fixing following switchgears & accessories in the existing cubical panel etc. complete as reqd. | |||
| 13 | 7.01 | 63 Amps. 25 KA TP MCCB | 1 | no | |
| 14 | 7.02 | 32 Amps. TP MCB | 1 | no | |
| 15 | 7.03 | 96mm x 96mm 0-500volt digital 3-ph. Voltmeter with built in selector switch | 1 | set | |
| 16 | 7.04 | 96mm x 96mm suitable range digital 3-ph. Ameter with builting selector switch & 3Nos. CT's | 1 | set | |
| 17 | 7.05 | LED type indicating light set for main incoming (Set of 3 Nos.) | 1 | set | |
| 18 | 7.06 | DOL starter for 5 HP motor complete with Power contactor, O/L relay, SPP, Push buttons, LED indicating lights etc. | 1 | set | |
| 19 | 8 | Supplying and fixing of 2 x 10 Sq.mm. XLPE insulated and PVC/ XLPE Sheated Aluminium Conductor Armoured power cable of 1.1 KV grade conf. to IS 7098(Part 1 ) 1988 & ISI Marked only of following manner etc complete as reqd. (Make : Polycab/Havells/R.R Kable/Finolex). | 50 | mtr | |
| 20 | 9 | Supplying, laying & fixing of following sizes PVC insulated PVC sheathed armoured copper conductor cable of 1.1 KV grade on surface etc. as reqd | |||
| 21 | 9.01 | 3 x 4 sq.mm | 20 | mtr | |
| 22 | 10 | Supplying & Laying and fixing of one number PVC insulated and PVC sheathed / XLPE copper conductor armoured power cable of 1.1 KV grade conf. to IS 7098 (Part-I)/ IS 1554 (Part-I) and ISI Marked only of following size on Surface etc as required | |||
| 23 | 10.01 | 3.5 x 25 sqmm | 40 | mtr | |
| 24 | 11 | Supplying & Making end termination with brass compression gland of following. PVC insulated PVC sheathed Aluminium/ Cu. Conductor cable of 1.1 KV grade etc. as reqd. | |||
| 25 | 11.01 | 3½ x 25 sq. mm (28mm) | 2 | set | |
| 26 | 11.02 | 2 X 10 sq. mm (19mm) | 6 | nos | |
| 27 | 12 | Supplying, laying & fixing of 6 SWG dia G.I. wire on surface or in recess for loop earthing along with cable etc. as reqd. | 80 | mtr |
AI Tender Summary
Tender Timeline
Dec 29, 2020
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 05, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 05, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 05, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender