Uttaranchal State Infrastructure Development Corporation Limited has published Renovation And Upgradation Of Infrastructure Of Giti At Kaladhungi , Distt . -Nainital Uttarakhand. Submission Date for this Tender is 04-02-2021. Infrastructure Work Tenders in Kaladungh Nainital Uttarakhand. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 11-Jan-2021 | BOQ Replaced | BOQ | 28-01-2021 |
2 | 27-Jan-2021 | date extension | Date | 04-02-2021 |
3 | 27-Jan-2021 | corrigendum1 | Other | 04-02-2021 |
Name of Work:Renovation & Upgradation of Infrastructure of GITI at Kaladhungi, Distt. –Nainital l Uttarakhand | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | BI01010001010000000000000515BI0100001126 | 84.95 | Cum |
2 | 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.\n All kinds of soil. | BI01010001010000000000000515BI0100001127 | 462.06 | Cum |
3 | 3 | Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials. All kinds of soil | BI01010001010000000000000515BI0100001128 | 38.54 | Cum |
4 | 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | BI01010001010000000000000515BI0100001129 | 397.05 | Cum |
5 | 5 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete | BI01010001010000000000000515BI0100001130 | 90.88 | Cum |
6 | 6 | Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. | BI01010001010000000000000515BI0100001131 | 34.8 | Cum |
7 | 7 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil, Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | BI01010001010000000000000515BI0100001132 | 161 | R.M |
8 | 8 | Applying antitermite treatment with specified chemicals under floors, sides of foundation etc. : With Chlorpyriphos / Lindane E.C. 20% with 1% concentration | BI01010001010000000000000515BI0100001133 | 375.74 | Sqm |
9 | 9 | Supplying chemical emulsion in sealed containers including delivery as specified Chlorpyriphos/ Lindane emulsifiable concentrate of 20% | BI01010001010000000000000515BI0100001134 | 206.66 | lit |
10 | 10 | P/L cement concrete - all works upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001135 | 0.4 | Cum |
11 | 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001136 | 79.03 | Cum |
12 | 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001137 | 6 | Cum |
13 | 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001138 | 4.42 | Cum |
14 | 14 | Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001139 | 27.74 | Sqm |
15 | 15 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. | BI01010001010000000000000515BI0100001140 | 27.74 | Sqm |
16 | 16 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth | BI01010001010000000000000515BI0100001141 | 166.46 | Sqm |
17 | 17 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001142 | 4.31 | Cum |
18 | 18 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001143 | 9.88 | Cum |
19 | 19 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001144 | 1.06 | Cum |
20 | 20 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works upto plinth level | BI01010001010000000000000515BI0100001145 | 55.49 | Cum |
21 | 21 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.All works above plinth level upto floor V level | BI01010001010000000000000515BI0100001146 | 44.98 | Cum |
22 | 22 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | BI01010001010000000000000515BI0100001147 | ||
23 | 23 | Centering and shuttering including strutting, propping etc. and removal of form for : | BI01010001010000000000000515BI0100001148 | ||
24 | 24 | Foundations, footings, bases of columns, etc. for mass concrete | BI01010001010000000000000515BI0100001149 | 223.45 | Sqm |
25 | 25 | Suspended floors, roofs, landings, balconies and access platform. | BI01010001010000000000000515BI0100001150 | 66.21 | Sqm |
26 | 26 | Columns, Pillars, Piers, Abutments, Posts and Struts | BI01010001010000000000000515BI0100001151 | 161.09 | Sqm |
27 | 27 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. | BI01010001010000000000000515BI0100001152 | 189.13 | Sqm |
28 | 28 | Suspended floors, roofs, landings, balconies and access platform, with water proof ply 12 mm thick | BI01010001010000000000000515BI0100001153 | 69.12 | Sqm |
29 | 29 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. | BI01010001010000000000000515BI0100001154 | 1522.5 | Kg. |
30 | 30 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars | BI01010001010000000000000515BI0100001155 | 11830 | Kg |
31 | 31 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001156 | 91.23 | Cum |
32 | 32 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001157 | 111.16 | Cum |
33 | 33 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:3 (1 cement :3 coarse sand) | BI01010001010000000000000515BI0100001158 | 84 | Sqm |
34 | 34 | Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand). | BI01010001010000000000000515BI0100001159 | 83.66 | R.M |
35 | 35 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/ sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of\n12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing | BI01010001010000000000000515BI0100001160 | ||
36 | 36 | of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanised M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each with zinc coating of 120 gms/sqm(both side inclusive)) to be provided at the horizontal joints of two | BI01010001010000000000000515BI0100001161 | ||
37 | 37 | boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint\nfinisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete: 75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: (part 3) : 1996 (Board with BIS certification marks) | BI01010001010000000000000515BI0100001162 | 115.5 | sqm |
38 | 38 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) NON decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. | BI01010001010000000000000515BI0100001163 | 8.7 | Sqm |
39 | 39 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper | BI01010001010000000000000515BI0100001164 | 8 | each |
40 | 40 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete. 250x10 mm | BI01010001010000000000000515BI0100001165 | 18 | each |
41 | 41 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm | BI01010001010000000000000515BI0100001166 | 16 | each |
42 | 42 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm | BI01010001010000000000000515BI0100001167 | 2 | Nos. |
43 | 43 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to rand screws etc. complete :300x16 mm | BI01010001010000000000000515BI0100001168 | 16 | each |
44 | 44 | Providing and fixing aluminium sliding door bolts, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm | BI01010001010000000000000515BI0100001169 | 1 | Nos. |
45 | 45 | 12mm thick plaster on the plain in side of mix 1:6( 1 cement : 6 fine sand) mortar | BI01010001010000000000000515BI0100001170 | 762.72 | Sqm. |
46 | 46 | 15mm thick plaster on the plain in side of mix 1:6( 1 cement : 6 fine sand) mortar | BI01010001010000000000000515BI0100001171 | 466.78 | Sqm. |
47 | 47 | 6 mm cement plaster 1:3 (1 cement: 3 fine sand) | BI01010001010000000000000515BI0100001172 | 12.72 | Sqm |
48 | 48 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001173 | 208.62 | Sqm. |
49 | 49 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats | BI01010001010000000000000515BI0100001174 | 3048.56 | Sqm. |
50 | 50 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :\nWater thinnable cement primer | BI01010001010000000000000515BI0100001175 | 2507.76 | Sqm. |
51 | 51 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | BI01010001010000000000000515BI0100001176 | 1574.22 | Sqm. |
52 | 52 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | BI01010001010000000000000515BI0100001177 | 15.84 | Sqm. |
53 | 53 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture | BI01010001010000000000000515BI0100001178 | 37.98 | Sqm. |
54 | 54 | Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with 5.5 mm thick glass panes | BI01010001010000000000000515BI0100001179 | 10.8 | Sqm. |
55 | 55 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | BI01010001010000000000000515BI0100001180 | 19231.7 | Kg. |
56 | 56 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001181 | 99.88 | Sqm. |
57 | 57 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm or 300x600mm | BI01010001010000000000000515BI0100001182 | 619.98 | Sqm. |
58 | 58 | 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume, including cement slurry etc. complete :Medium shade pigment with 50% white cement and 50% ordinary cement | BI01010001010000000000000515BI0100001183 | 63 | Sqm. |
59 | 59 | Marble chips skirting up to 30 cm height, rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume : 11.12.1 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) :Medium shade pigment with 50% white cement and 50% ordinary cement | BI01010001010000000000000515BI0100001184 | 6.9 | Sqm. |
60 | 60 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red,Elite Brown, Cat Eye or equivalent. | BI01010001010000000000000515BI0100001185 | 126 | Sqm. |
61 | 61 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required | BI01010001010000000000000515BI0100001186 | 59 | Sqm. |
62 | 62 | Providing and laying in situ seven course water proofing treatmentwith APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). sqm 592.65 | BI01010001010000000000000515BI0100001187 | 1315.5 | Sqm |
63 | 63 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-chargeGI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100\ngms/sqm (both sides inclusive) and electro statically\npolyester powder coated of thickness 60 microns\n(minimum), including factory painted after bending | BI01010001010000000000000515BI0100001188 | ||
64 | 64 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. | BI01010001010000000000000515BI0100001189 | 553.11 | Sqm |
65 | 65 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm) | BI01010001010000000000000515BI0100001190 | ||
66 | 66 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. | BI01010001010000000000000515BI0100001191 | 182.5 | Sqm |
67 | 67 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster | BI01010001010000000000000515BI0100001192 | 117 | Sqm |
68 | 68 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. : 80x1.25 mm M.S. laths with 1.25 mm thick top cover | BI01010001010000000000000515BI0100001193 | 36 | sqm |
69 | 69 | Providing and fixing ball bearing for rolling shutters. | BI01010001010000000000000515BI0100001194 | 4 | Nos. |
70 | 70 | Extra for providing mechanical device chain and crank operation for operating rolling shutters. : Exceeding 10.00 sqm and upto 16.80 sqm in the area | BI01010001010000000000000515BI0100001195 | 36 | sqm |
71 | 71 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gm/m² | BI01010001010000000000000515BI0100001196 | 512.84 | Sqm |
72 | 72 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete: 0.80 mm thick with zinc coating not less than 275 gm/m² | BI01010001010000000000000515BI0100001197 | 30 | rm |
73 | 73 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.: 0.80 mm thick with zinc coating not less than 275 gm/m² | BI01010001010000000000000515BI0100001198 | 60 | rm |
74 | 74 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | BI01010001010000000000000515BI0100001199 | 487.37 | Sqm |
75 | 75 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.\n110 mm diameter | BI01010001010000000000000515BI0100001200 | 126 | R.M |
76 | 76 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm | BI01010001010000000000000515BI0100001201 | 20 | No's |
77 | 77 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. | BI01010001010000000000000515BI0100001202 | ||
78 | 78 | 110 mm bend | BI01010001010000000000000515BI0100001203 | 20 | Nos |
79 | 79 | 110 mm Shoe | BI01010001010000000000000515BI0100001204 | 20 | Nos |
80 | 80 | 110x110x110 mm tee | BI01010001010000000000000515BI0100001205 | ||
81 | 81 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm | BI01010001010000000000000515BI0100001206 | 30 | Nos |
82 | 82 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe | BI01010001010000000000000515BI0100001207 | 56 | R.M |
83 | 83 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : | BI01010001010000000000000515BI0100001208 | 56 | R.M |
84 | 84 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001209 | 25 | Nos |
85 | 85 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mmnominal size), inside plastering 12 mm thick with cement mortar 1:3 (1cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001210 | 18 | Nos |
86 | 86 | Extra for depth for manholes : With Sewer bricks conforming to IS : 4885 | BI01010001010000000000000515BI0100001211 | 3.6 | R.M |
87 | 87 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | BI01010001010000000000000515BI0100001212 | 4 | Nos |
88 | 88 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001213 | 12 | Nos |
89 | 89 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | BI01010001010000000000000515BI0100001214 | 12 | Nos |
90 | 90 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | BI01010001010000000000000515BI0100001215 | 10 | Nos |
91 | 91 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | BI01010001010000000000000515BI0100001216 | 10 | Nos |
92 | 92 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other ouplings in C.P. brass,including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | BI01010001010000000000000515BI0100001217 | 14 | Nos |
93 | 93 | Providing and fixing soil, waste and vent pipes: Centrifugally cast (spun) iron socketed pipe as per IS: 3989. | BI01010001010000000000000515BI0100001218 | ||
94 | 94 | 100MM | BI01010001010000000000000515BI0100001219 | 36 | Meter |
95 | 95 | 75mm | BI01010001010000000000000515BI0100001220 | 54 | Meter |
96 | 96 | Providing & filling the tee /bend /collar/tapper etc., with rubber jount filler including all complete | BI01010001010000000000000515BI0100001221 | ||
97 | 97 | 100 mm | BI01010001010000000000000515BI0100001222 | ||
98 | 98 | Providing and fixing plain bend of required degree.100 mm dia Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001223 | 16 | Nos |
99 | 99 | Providing and fixing double equal plain invert branch of required degree:100x100x100x100 mm Sand cast iron S&S as per IS 3989 | BI01010001010000000000000515BI0100001224 | 8 | Nos |
100 | 100 | 75mm | BI01010001010000000000000515BI0100001225 | ||
101 | 101 | Providing and fixing plain bend of required degree.75 mm dia Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001226 | 10 | Nos |
102 | 102 | Providing and fixing double equal plain invert branch of required degree:75x75x75x75 mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001227 | 5 | Nos |
103 | 103 | Providing and fixing 600 x 455 mm. bevelled edge mirror of Saint Gobin or Modi float glass complete with 6 mm. thick hard board ground fix to wooden cleats with CP brass screws and washers etc. complete. | BI01010001010000000000000515BI0100001228 | 10 | Nos |
104 | 104 | Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms. | BI01010001010000000000000515BI0100001229 | 10 | Nos |
105 | 105 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms | BI01010001010000000000000515BI0100001230 | 10 | Nos |
106 | 106 | Providing and fixing toilet paper holder :C.P. brass | BI01010001010000000000000515BI0100001231 | 12 | Nos |
107 | 107 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001232 | 24 | Nos |
108 | 108 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron(100 mm) | BI01010001010000000000000515BI0100001233 | 20 | Nos |
109 | 109 | Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast | BI01010001010000000000000515BI0100001234 | 40 | Nos |
110 | 110 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : | BI01010001010000000000000515BI0100001235 | 20 | Metre |
111 | 111 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore | BI01010001010000000000000515BI0100001236 | 16 | Nos |
112 | 112 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001237 | 10 | Nos |
113 | 113 | 12 mm cement plaster finished with a floating coat of neat cement of mix1:3 (1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001238 | 80 | Sqm |
114 | 114 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.40mm thick with 20mm nominal size stone aggregate. | BI01010001010000000000000515BI0100001239 | 110 | Sqm |
115 | 115 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick | BI01010001010000000000000515BI0100001240 | 2.8 | Sqm |
116 | 116 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001241 | 1 | Nos |
117 | 117 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter : | BI01010001010000000000000515BI0100001242 | 105 | Meter |
118 | 118 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe | BI01010001010000000000000515BI0100001243 | 105 | Meter |
119 | 119 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | BI01010001010000000000000515BI0100001244 | 2524.21 | Kg. |
120 | 120 | Providing & fixing of R.C.C manhole covering tank (600 x 450) | BI01010001010000000000000515BI0100001245 | 4 | nos |
121 | 121 | Providing & fixing of foot rest in tank (20x20) | BI01010001010000000000000515BI0100001246 | 10 | nos |
122 | 122 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc | BI01010001010000000000000515BI0100001247 | ||
123 | 123 | 15 mm dia nominal bore | BI01010001010000000000000515BI0100001248 | 139 | Meter |
124 | 124 | 20 mm dia nominal bore | BI01010001010000000000000515BI0100001249 | 26 | Meter |
125 | 125 | 25 mm nominal bore | BI01010001010000000000000515BI0100001250 | 20 | Meter |
126 | 126 | 40 mm dia nominal bore | BI01010001010000000000000515BI0100001251 | 25 | Meter |
127 | 127 | 50 mm dia nominal bore | BI01010001010000000000000515BI0100001252 | 30 | Meter |
128 | 128 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : | BI01010001010000000000000515BI0100001253 | ||
129 | 129 | 15 mm nominal bore | BI01010001010000000000000515BI0100001254 | 34.75 | Nos. |
130 | 130 | 20 mm nominal bore | BI01010001010000000000000515BI0100001255 | 7 | Nos. |
131 | 131 | 25 mm nominal bore | BI01010001010000000000000515BI0100001256 | 5 | Nos. |
132 | 132 | 40 mm nominal bore | BI01010001010000000000000515BI0100001257 | 6 | Nos. |
133 | 133 | 50 mm nominal bore | BI01010001010000000000000515BI0100001258 | 8 | Nos. |
134 | 134 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore | BI01010001010000000000000515BI0100001259 | 8 | Nos |
135 | 135 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : | BI01010001010000000000000515BI0100001260 | ||
136 | 136 | 20 mm nominal bore | BI01010001010000000000000515BI0100001261 | 10 | Nos |
137 | 137 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : | BI01010001010000000000000515BI0100001262 | ||
138 | 138 | 25 mm nominal bore (Horizontal) | BI01010001010000000000000515BI0100001263 | 10 | Nos |
139 | 139 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | BI01010001010000000000000515BI0100001264 | 4000 | Ltr. |
140 | 140 | Finishing walls with acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). | BI01010001010000000000000515BI0100001265 | 629.92 | Sqm |
141 | 141 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work | BI01010001010000000000000515BI0100001266 | 47.88 | Sqm |
142 | 142 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade | BI01010001010000000000000515BI0100001267 | 54 | Sqm |
143 | 143 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin- Charge. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. | BI01010001010000000000000515BI0100001268 | 60 | Sqm |
144 | 144 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished seamless type tubes | BI01010001010000000000000515BI0100001269 | 1716 | Kg |
145 | 145 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys,rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for\npayment). | BI01010001010000000000000515BI0100001270 | 7.2 | Sqm |
146 | 146 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work | BI01010001010000000000000515BI0100001271 | 4.03 | Sqm |
147 | 147 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. | BI01010001010000000000000515BI0100001272 | 3.6 | Sqm |
148 | 148 | Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand)Above plinth level upto floor V level | BI01010001010000000000000515BI0100001273 | 1.38 | Cum |
149 | 149 | Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm,pressed mild steel welded or rigidly fixed together by mechanical means,including M.S. pressed butt hinges 2.5 mm thick with mortar guards,lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B Fixing with adjustable lugs with split end tail to each jamb | BI01010001010000000000000515BI0100001274 | 14.1 | Metre |
150 | 150 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not\nless than 10 kg/ sqm) | BI01010001010000000000000515BI0100001275 | 2.88 | Sqm |
151 | 151 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m² | BI01010001010000000000000515BI0100001276 | 12 | Sqm |
152 | 152 | Horticulture | BI01010001010000000000000515BI0100001277 | ||
153 | 153 | Trenching in ordinary soil up to a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling with in a lead of 50m and making up the trenched area to proper levels by filling with earth | BI01010001010000000000000515BI0100001278 | 100 | Cum |
154 | 154 | Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment). | BI01010001010000000000000515BI0100001279 | 100 | Cum |
155 | 155 | Supplying and stacking sludge at site including royalty and carriage up to 1 km (sludge measured in stacks will be reduced by 8% for payment). | BI01010001010000000000000515BI0100001280 | 100 | Cum |
156 | 156 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. | BI01010001010000000000000515BI0100001281 | 500 | Sqm |
157 | 157 | Fine dressing the ground. | BI01010001010000000000000515BI0100001282 | 500 | Sqm |
158 | 158 | Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and / or good earth to be paid separately). | BI01010001010000000000000515BI0100001283 | 75 | Cum |
159 | 159 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.. | BI01010001010000000000000515BI0100001284 | 75 | Cum |
160 | 160 | Grassing with ‘Doob’ grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately). In r | BI01010001010000000000000515BI0100001285 | 500 | Sqm |
161 | 161 | Preparation of beds for hedging and shrubbery by excavating cu.m 60cm deep and trenching the excavated base to a further depth of 30cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of sta | BI01010001010000000000000515BI0100001286 | 5 | Cum |
162 | 162 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) 60 CM DIA AND 60 CM DEPTH | BI01010001010000000000000515BI0100001287 | 50 | No. |
163 | 163 | Demolishing Items | BI01010001010000000000000515BI0100001288 | ||
164 | 164 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar | BI01010001010000000000000515BI0100001289 | 20.6 | Cum |
165 | 165 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. metres | BI01010001010000000000000515BI0100001290 | 4 | Nos |
166 | 166 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area beyond 3 sq. metres | BI01010001010000000000000515BI0100001291 | 2 | Nos |
167 | 167 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | BI01010001010000000000000515BI0100001292 | 42 | Sqm |
168 | 168 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | BI01010001010000000000000515BI0100001293 | 0.72 | Cum |
169 | 169 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | BI01010001010000000000000515BI0100001294 | 28.35 | Cum |
170 | 170 | SOR ITEMS | BI01010001010000000000000515BI0100001295 | ||
171 | 171 | Excavation in Soil with Dozer with lead upto 100 m\nExcavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections | BI01010001010000000000000515BI0100001296 | 54 | Cum |
172 | 172 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 1 as per Technical Specification Clause 405. | BI01010001010000000000000515BI0100001297 | 36 | cum |
173 | 173 | Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion cu.m 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work.(Based on PWD specifications)\n | BI01010001010000000000000515BI0100001298 | 27 | cum |
174 | 174 | Brick masonry work in cement mortar in substructure complete excepting pointing and plastering, as per drawing and technical specification Clauses 602, 603, 604, 1202 & 1204 | BI01010001010000000000000515BI0100001299 | 6.21 | Cum |
175 | 175 | Excavation for Structures\nEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. | BI01010001010000000000000515BI0100001300 | 4.14 | Cum |
176 | 176 | Brick on edge pavement with straight overburnt bricks laid on edge including preparation of subgrade to prescribed camber and including supply of bricks, filling joints with local sand and spreading blinding coat 1cm (3/8") depth of local sand over the entire surface and including supply of all materials, labour and T&P etc. required for proper completion of the work | BI01010001010000000000000515BI0100001301 | 60 | Sqm |
177 | 177 | Providing and fillling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight. | BI01010001010000000000000515BI0100001302 | 30 | Metre |
178 | 178 | Laying Cement Concrete Pipe NP3 (burried conduits) on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonary work in head wall and parapets | BI01010001010000000000000515BI0100001303 | 35 | Metre |
179 | 179 | Cement Concrete (PCC M-30) Pavement:-\nConstruction of Un-reinforced, Cement concrete pavement, thickness as per design, over a prepeared sub base with 43 grade cement or any other type PCC Grade M-30, coarse and fine aggregates conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side\nformwork (Steel channel, laying and fixing of wedges, steel plates including levelling the formwork and laying and fixing of 125 micron thick polythene film, as per drawing), spreading the concrete with shovels,rakes, compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, usingcuring compound where specified and water finishing to lines and grade as per drawings and technical specifications. | BI01010001010000000000000515BI0100001304 | 18 | cum |
180 | 180 | MR Items | BI01010001010000000000000515BI0100001305 | ||
181 | 181 | EmergencyY Light & Illuminated Signages | BI01010001010000000000000515BI0100001306 | ||
182 | 182 | PAR 2019 | BI01010001010000000000000515BI0100001307 | ||
183 | 183 | Illuminated signages | BI01010001010000000000000515BI0100001308 | 10 | Sqmt |
184 | 184 | Testing Charges as per EMP | BI01010001010000000000000515BI0100001309 | ||
185 | 185 | Pre Construction Stage | BI01010001010000000000000515BI0100001310 | ||
186 | 186 | Environmental Baseline Data Generation (Pre Construction Stage) | BI01010001010000000000000515BI0100001311 | ||
187 | 187 | Ambient Air Quality Test | BI01010001010000000000000515BI0100001312 | 1 | Each |
188 | 188 | Noise Level Test | BI01010001010000000000000515BI0100001313 | 1 | Each |
189 | 189 | Drinking Water Quality Test | BI01010001010000000000000515BI0100001314 | 1 | Each |
190 | 190 | Construction Stage | BI01010001010000000000000515BI0100001315 | ||
191 | 191 | Environmental Monitoring (Construction Stage) | BI01010001010000000000000515BI0100001316 | ||
192 | 192 | Ambient Air Quality Test | BI01010001010000000000000515BI0100001317 | 3 | Each |
193 | 193 | Noise Level Test | BI01010001010000000000000515BI0100001318 | 3 | Each |
194 | 194 | Drinking Water Quality Test | BI01010001010000000000000515BI0100001319 | 3 | Each |
195 | 195 | Dust Suppression | BI01010001010000000000000515BI0100001320 | ||
196 | 196 | Dust Suppression at Site ( Assumption @ 2 hours/ day or as and when required) | BI01010001010000000000000515BI0100001321 | 100 | Hrs |
197 | 197 | Septic Waste Cleaning | BI01010001010000000000000515BI0100001322 | ||
198 | 198 | Approximately 3000 Litres in One Tanker (3 Tankers shall be required as per EMP) | BI01010001010000000000000515BI0100001323 | 12 | Per KL |
199 | 199 | Capacity Building | BI01010001010000000000000515BI0100001324 | ||
200 | 200 | Training at Site for Implementation of EMP | BI01010001010000000000000515BI0100001325 | 1 | Job |
201 | 201 | Providing and fixing C.P. brass bib cock of push button of approved quality complete as per direction by engineer in charge\n | BI01010001010000000000000515BI0100001326 | 30 | Nos |
202 | 202 | Providing and fixing C.P. brass angle cock/ valve for basin mixer , geyser points or to other similar fittings of approved quality conforming to IS:8931(Jaguar/Parryware) :15 mm nominal bore(Push type as per approval of E-in CHARGE\n | BI01010001010000000000000515BI0100001327 | 22 | Nos |
203 | 203 | Letter Writing on Granite by Brass letters | BI01010001010000000000000515BI0100001328 | 3.6 | Sqm |
204 | 204 | Providing and fixing Tata pravesh window and ventilators and frame with hardware ( hinges, lever handle with lock, tower bolt) and instalation (Glass, Grill and wire gauge) | BI01010001010000000000000515BI0100001329 | 23.76 | Sqm |
205 | 205 | Providing and fixing Tata Steel Pravesh Door (Hardware GEZE Make)Ball bearing butt hinge of size 102x75x3mm with screws in SSS- Dead Bolt (Mortise Dead Lock with Euro profike cylinder(Green), | BI01010001010000000000000515BI0100001330 | ||
206 | 206 | Concealed Flush Bolt (98307009), D - Handle(D-Both Side - Dia 19mmX254mm(L)Geze)(Double leaf) | BI01010001010000000000000515BI0100001331 | 6 | Sqm |
207 | 207 | (Tata Steel Door swings type of any size)(Single leaf) | BI01010001010000000000000515BI0100001332 | 3 | Sqm |
208 | 208 | Providing & fixing Tata Steel window/sliding window Of any size 27mm Series with Toughened Glass and with mesh shutter 2.5 Track | BI01010001010000000000000515BI0100001333 | 7.9 | Sqm |
209 | 209 | Electrical (D.S.R Items) | BI01010001010000000000000515BI0100001334 | ||
210 | 210 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor\nsingle core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box\nand earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ,Group B | BI01010001010000000000000515BI0100001335 | 359 | Point |
211 | 211 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /\nrecessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. | BI01010001010000000000000515BI0100001336 | 2 | Point |
212 | 212 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. | BI01010001010000000000000515BI0100001337 | 732 | Mtr |
213 | 213 | Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired., 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire | BI01010001010000000000000515BI0100001338 | 660.188 | Mtr |
214 | 214 | Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired. , 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | BI01010001010000000000000515BI0100001339 | 295 | Mtr |
215 | 215 | Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired. ,2 X 6 sq. mm + 1 X 6 sq. mm earth wire | BI01010001010000000000000515BI0100001340 | 216 | Mtr |
216 | 216 | Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired., 4 X 6 sq. mm + 2 X 6 sq. mm earth wire | BI01010001010000000000000515BI0100001341 | 231 | Mtr |
217 | 217 | Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired., 4 X 10 sq. mm + 2 X 6 sq. mm earth wire | BI01010001010000000000000515BI0100001342 | 140 | Mtr |
218 | 218 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. , 2 pair | BI01010001010000000000000515BI0100001343 | 420 | Mtr |
219 | 219 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required., 20 MM | BI01010001010000000000000515BI0100001344 | 80 | Mtr |
220 | 220 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including\ncutting the wall and making good the same in case of recessed conduit as required., 20 mm | BI01010001010000000000000515BI0100001345 | 375 | Mtr |
221 | 221 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.., 5/6 A switch | BI01010001010000000000000515BI0100001346 | 80 | Each |
222 | 222 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., 3 pin 5/6 A socket outlet | BI01010001010000000000000515BI0100001347 | 80 | Each |
223 | 223 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., Telephone socket outlet | BI01010001010000000000000515BI0100001348 | 29 | Each |
224 | 224 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. | BI01010001010000000000000515BI0100001349 | 151 | Each |
225 | 225 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. ,1 or 2 Module (75mmX75mm) | BI01010001010000000000000515BI0100001350 | 39 | Each |
226 | 226 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required., 6 Module (200mmX75mm) | BI01010001010000000000000515BI0100001351 | 40 | Each |
227 | 227 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. | BI01010001010000000000000515BI0100001352 | 38 | Each |
228 | 228 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. | BI01010001010000000000000515BI0100001353 | 61 | Each |
229 | 229 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. | BI01010001010000000000000515BI0100001354 | 271 | Each |
230 | 230 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, LED Fixtures, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. | BI01010001010000000000000515BI0100001355 | 187.6 | Each |
231 | 231 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. | BI01010001010000000000000515BI0100001356 | 105.7 | Each |
232 | 232 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep | BI01010001010000000000000515BI0100001357 | 14.7 | Each |
233 | 233 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. | BI01010001010000000000000515BI0100001358 | 14.7 | Each |
234 | 234 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted\nincluding earthing etc. as required. (But without MCB/RCCB/Isolator), 4 way (4 + 12), Double door | BI01010001010000000000000515BI0100001359 | 3 | Each |
235 | 235 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted\nincluding earthing etc. as required. (But without MCB/RCCB/Isolator), 6 way (4 + 18), Double door | BI01010001010000000000000515BI0100001360 | 6 | Each |
236 | 236 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of\nfollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required., Single pole | BI01010001010000000000000515BI0100001361 | 100.8 | Each |
237 | 237 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of\nfollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required., Triple pole | BI01010001010000000000000515BI0100001362 | 22.4 | Each |
238 | 238 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A | BI01010001010000000000000515BI0100001363 | 1 | Each |
239 | 239 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A | BI01010001010000000000000515BI0100001364 | 8 | Each |
240 | 240 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top\nalongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. | BI01010001010000000000000515BI0100001365 | 18 | Each |
241 | 241 | Supplying and fixing 30 A/32A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top\nalongwith 30 A/32A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. | BI01010001010000000000000515BI0100001366 | 35 | Each |
242 | 242 | Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required., 150 mm width X 50 mm depth X 1.6 mm thickness | BI01010001010000000000000515BI0100001367 | 50 | RM |
243 | 243 | Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays bends with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required. ,150 mm width X 50 mm depth X 1.6 mm thickness | BI01010001010000000000000515BI0100001368 | 10 | Each |
244 | 244 | Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays tees with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required., 150 mm width X 50 mm depth X 1.6 mm thickness | BI01010001010000000000000515BI0100001369 | 5 | Each |
245 | 245 | Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays cross members with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required., 150 mm width X 50 mm depth X 1.6 mm thickness | BI01010001010000000000000515BI0100001370 | 10 | Each |
246 | 246 | Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete | BI01010001010000000000000515BI0100001371 | 151 | Each |
247 | 247 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including\ncutting the wall and making good the same in case of recessed\nconduit as required. 25 mm | BI01010001010000000000000515BI0100001372 | 1173 | Mtr |
248 | 248 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. , 1 run of cable | BI01010001010000000000000515BI0100001373 | 880 | Metre |
249 | 249 | Supplying and drawing following sizes of FRLS PVC insulated\ncopper conductor, single core cable in the existing surface/\nrecessed steel/ PVC conduit as required. 2 x 1.5 sq. mm | BI01010001010000000000000515BI0100001374 | 500 | Mtr |
250 | 250 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. | BI01010001010000000000000515BI0100001375 | 10 | set |
251 | 251 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. | BI01010001010000000000000515BI0100001376 | 2 | set |
252 | 252 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) | BI01010001010000000000000515BI0100001377 | 25 | mtr |
253 | 253 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) | BI01010001010000000000000515BI0100001378 | 50 | mtr |
254 | 254 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. | BI01010001010000000000000515BI0100001379 | 20 | mtr |
255 | 255 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. | BI01010001010000000000000515BI0100001380 | 20 | mtr |
256 | 256 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. | BI01010001010000000000000515BI0100001381 | 100 | mtr |
257 | 257 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with\n85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. | BI01010001010000000000000515BI0100001382 | 2 | Each |
258 | 258 | Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck\nnuts and spring washers etc. complete as required. | BI01010001010000000000000515BI0100001383 | 8 | Each |
259 | 259 | Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. | BI01010001010000000000000515BI0100001384 | 20 | Mtr |
260 | 260 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing\nRCC/ HUME/ METAL pipe/existing open trence/as required. Above 35 sq. mm and upto 95 sq. mm | BI01010001010000000000000515BI0100001385 | 150 | Mtr |
261 | 261 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size\non wall surface and overhead as required. Upto 35 sq. mm (clamped with 1mm thick saddle) | BI01010001010000000000000515BI0100001386 | 80 | Mtr |
262 | 262 | Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm\nMS flat clamp) | BI01010001010000000000000515BI0100001387 | 50 | Mtr |
263 | 263 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated\nand PVC sheathed / XLPE aluminium conductor cable of 1.1 KV, 3½ X 35 sq. mm (32mm) | BI01010001010000000000000515BI0100001388 | 4 | each |
264 | 264 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated\nand PVC sheathed / XLPE aluminium conductor cable of 1.1 KV, 3½ X 70 sq. mm (38mm) | BI01010001010000000000000515BI0100001389 | 2 | each |
265 | 265 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated\nand PVC sheathed / XLPE aluminium conductor cable of 1.1 KV, 3½ X 185 sq. mm (45mm) | BI01010001010000000000000515BI0100001390 | 2 | each |
266 | 266 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated\nand PVC sheathed / XLPE aluminium conductor cable of 1.1 KV, 4 X 10 sq. mm (25mm) | BI01010001010000000000000515BI0100001391 | 10 | each |
267 | 267 | Erection of metallic/octagonal pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling\netc. as required. ,Above 4.5 metre and upto 6.5 metre | BI01010001010000000000000515BI0100001392 | 10 | each |
268 | 268 | Providing and making steel pole collar with cement concrete (1cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted) | BI01010001010000000000000515BI0100001393 | 3.6 | cum |
269 | 269 | Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 40 mm dia | BI01010001010000000000000515BI0100001394 | 20 | mtr |
270 | 270 | Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required. 100 mm dia | BI01010001010000000000000515BI0100001395 | 120 | Metre |
271 | 271 | Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required. 150 mm dia | BI01010001010000000000000515BI0100001396 | 50 | Metre |
272 | 272 | Supplying and laying of following size DWC HDPE pipe ISI markedalong with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) includingexcavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) | BI01010001010000000000000515BI0100001397 | 20 | Metre |
273 | 273 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size in the existing RCC/\nHUME/ METAL pipe as required., Upto 120 sq. mm | BI01010001010000000000000515BI0100001398 | 40 | Mtr. |
274 | 274 | Supplying & making of INDOOR cable end terminations with HEAT SHRINKABLE JOINTING KIT with all accessories including lugs suitable for following sizes of 3 core, XLPE Al conductor cable of 11 KV grade as required., 3 X120 sq mm. | BI01010001010000000000000515BI0100001399 | 4 | Each |
275 | 275 | Supplying & making of OUTDOOR cable end terminations with HEAT SHRINKABLE JOINTING KIT with all accessories including lugs suitable for following sizes of 3 core, XLPE Al conductor cable of 11 KV grade as required. 3 X120 sq mm. | BI01010001010000000000000515BI0100001400 | 4 | Each |
276 | 276 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required,150 mm dia | BI01010001010000000000000515BI0100001401 | 40 | mtr |
277 | 277 | SUB HEAD B - NON SCHEDULE ITEMS | BI01010001010000000000000515BI0100001402 | ||
278 | 278 | Supplying, installation, testing & commissioning of modular, fully bolted type, sectionallised Low Voltage Panel suitable for 415 V, 3 Phase, 4 wire 50 Hz AC supply system as per standard IEC 61439- 1 &2 as Total Type Tested Assembly and of suitable size fabricated in compartmentalized design with CRCA sheet steel of 2mm thick for load bearing member and 1.6mm for Non load bearing member. 3mm thick for gland plates. i/c cleaning & finishing complete with 9 tank process (automatic PT spray) for powder coating in approved shade, having suitable rating capacity extensible type TPN Aluminium bus bars of high conductivity as per BOQ, bus bar supports, with short circuit withstand capacity of 50kA for 1 Sec., bottom base frame of 3mm thick (multifold design), fabrication shall be done in trasportable sections, entire LENGTH panel shall have a common earth bar at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of bus bars/Copper Cables and control wiring with 2.5 Sq.mm. PVC insulated copper FRLS conductor S/C cable for voltage & Current respectively, cable alleys, i/c providing following switch gears , Panel shall be suitable for Internal Arc Test 50kA for 400mS as per IEC61641 and Siesmic Zone-IV tested , Form of Separation Form 4b, Mechanical Impact IK08-IK10 as per IEC, ACBs shall have Temperature protection for release & having display with battery backup and 20Faults Trip History : ( The board shall be dust and vermin proof with degree of protection IP 42 )\nINCOMER:- 1 nos. 630 A 415V, Ics=Icu=Icw=50KA, 4P ACB with MP release with LCD display having O/L, S/C , G/F Over temperature and neutral failure protection, release should have minimum 10 Nos fault history for diagnosis of fault, .1 nos. Digital type multi function meters (V+A+Hz) with cast resin CTs 1000/5A. , 1 Set of phase indicating lamp with MCB 1 No. 400 A, 4pole onload changeover switch. BUSBAR:-400 A TPN Bus bar of aluminimum alloy. OUTGOING:- 1 nos. 200 A, 415V, FP MCCB of 36kA.with adjustable O/L and S/C protection., 4 nos. 125A, 415V, FP MCCB of 25kA.with adjustable O/L and S/C protection.,2 nos. 63A, 415V, FP MCCB of 25kA.with adjustable O/L and S/C protection. , 5 nos. 40A, 415V, 4P MCB of 10kA.with O/L and S/C protection. 6 nos. 63A, 415V, 4P MCB of 10kA.with O/L and S/C protection.4 nos. 32A, 230V, 2P MCB of 10kA.with O/L and S/C protection. Incommer for APFC Section 1 nos. 400A, 415V, FP MCCB of 36kA.with adjustable O/L and S/C protection. 1 nos. Digital type multi function meters (V+A+Hz) with cast resin CTs 1000/5A. 1 Set of phase indicating lamp with MCB 1 No. APFC Relay suitable for controlling of 8 Nos relay output. 50 KVAR Capacitor Bank in 12 steps having MCB/MCCB for protection, Contactors as per AC6 Duty for automatic switching, having auto manual switch and indication for each step. | BI01010001010000000000000515BI0100001403 | 1 | NOS. |
279 | 279 | Supply and Erecting modular type computer jack RJ 45 with screwless connector approved make with mounting plate and box with wiring connections complete. | BI01010001010000000000000515BI0100001404 | 44 | NOS. |
280 | 280 | Supplying & fixing of 6 Core - Optic fiber cable OM4 - Unitube Corrugated steel tape Optical Fiber Cable as per IEC 60794-1 | BI01010001010000000000000515BI0100001405 | 200 | Mtr |
281 | 281 | Supplying & fixing of U/ UTP, Cat 6 A Cable as per ANSI/TIA 568C.2 at 500 to 600 MHz suitable for (Complete in all respect) cctv | BI01010001010000000000000515BI0100001406 | 690 | Mtr |
282 | 282 | Supply and fixing of 2 Zone Conventional Fire Alarm Control Panel , Panel Operating Voltage :AC 220v 50Hz #10%, DC 24v 1 amp Operating Temperature :0º C to 50º (176)C Operating Humidity :95% (non-condensing) Hooter output :2A (24v DC) ,EOL :4k7 ohm, 1 per Zone, Construction :1.8mm CRCA sheet duly powder Coated ,16 * 2 character LCD Display ,\nExtra potential free contact for fire & fault ,Auto dialer connectivity facility ,Inbuilt battery charger & battery space facility ,Reset, alarm cancel, lamp test feature\n,Zone wise test and isolation facility ,Protected from Hi-voltage, over-load, short-circuit, Zone wise LED indications for fire, open and short. | BI01010001010000000000000515BI0100001407 | 1 | NOS. |
283 | 283 | Supply and fixing of High intensity Sounder with mounting base. | BI01010001010000000000000515BI0100001408 | 6 | NOS. |
284 | 284 | Providing , installation , testing & commissioning of Glass Break Type Manual Call Point | BI01010001010000000000000515BI0100001409 | 6 | NOS. |
285 | 285 | Supply of following sizes of XLPE insulated Aluminum Armoured cable, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS code and technical specifications. 4CX10 SQMM AL ARMOURD CABLE | BI01010001010000000000000515BI0100001410 | 150 | Mtr |
286 | 286 | Supply of following sizes of XLPE insulated Aluminum Armoured cable, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS code and technical specifications. 3.5CX35 SQMM AL ARMOURD CABLE | BI01010001010000000000000515BI0100001411 | 100 | Mtr |
287 | 287 | Supply of following sizes of XLPE insulated Aluminum Armoured cable, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS code and technical specifications. 3.5CX70 SQMM AL ARMOURD CABLE | BI01010001010000000000000515BI0100001412 | 50 | Mtr |
288 | 288 | Supply of following sizes of XLPE insulated Aluminum Armoured cable, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS code and technical specifications. 3.5CX185 SQMM AL ARMOURD CABLE | BI01010001010000000000000515BI0100001413 | 50 | Mtr |
289 | 289 | Supply of LED street light fitting not more than 30W having System Efficacy >120 lm/W, system output >3600Lumens, THD <10%, Power Factor >0.95, CRI >70, CCT 5700, Full IP 66 ( with out Glue) protected single piece die cast aluminium housing having toughned glass/PC with Impact resistance IK07. LED driver should be Fully metal body Potted & Encapsulated . BIS compliant driver should sustain 440V Stress Voltage protection for 8 Hrs., High Cut off : 325V(+/- 15V) and should have feature of Auto Restart. Driver shall have 4KV Surge protection and feasibility of 10KV external SPD housed in Luminiare and confirming standard IEC60598. Including suitable size GI pipe bracket clamps, nut, bolts and washers complete all as directed. Make : PHILIPS cat. part no. BRP046 LED 36 CW MR S1 PSU GR or eqivalent as per approved make | BI01010001010000000000000515BI0100001414 | 10 | NOS. |
290 | 290 | Supply of 5.0 Mtr Height Galvanized Iron OctagonalPoles having uniformly tapered polygonal shape throughout the length with straightLongitudinal welding in a single shaft. There shall not be any circumferential welding. Dimensions:Top Dia.: 70mm, Bottom Dia.: 130mm, Thickness 3mm &Base plate 200*200*12 mm. Dimension of Foundation Bolts - Length 600mm, Dia. 24mm &04 Nos. Bolts manufactured from special steel along with nuts, washer, anchor plates & Templates. SingleArm of 0.5 Mtr. Shall be provided along with – MAKE PHILIPS or eqivalent as pr approved make. | BI01010001010000000000000515BI0100001415 | 10 | NOS. |
291 | 291 | Safety Equipments & Accessories | BI01010001010000000000000515BI0100001416 | ||
292 | 292 | Supplying & laying 1.1 kv grade ISI marked synthetic rubber mats as per specifications of chief electrical inspectorate. | BI01010001010000000000000515BI0100001417 | 2 | RM |
293 | 293 | Supplying & fixing of shock treatment chart printed in hindi and english fitted in wooden frame and glass at front side and hard board at back side. | BI01010001010000000000000515BI0100001418 | 2 | Nos |
294 | 294 | Supplying & fixing in position 1.1 kv rubber hand gloves. | BI01010001010000000000000515BI0100001419 | 2 | Set |
295 | 295 | Supplying of first aid box as approved by St. John Ambulance Brigade/Indian Red Cross conforming to IS : 2217 - 1963. | BI01010001010000000000000515BI0100001420 | 2 | Nos |
296 | 296 | Supplying of Electrical maintenance tool kit as per requirement of chief electrical inspectorate. | BI01010001010000000000000515BI0100001421 | 1 | Nos |
297 | 297 | SITC of 11 KV, 630 Amp Outdoor type HT RMU. The RMU Should consist on one no of Load break switch (LBS) as incomer and one VCB as outgoing. The RMU should be type tested according to IEC 62271-100, 200 & 102, IAC AFL, 21 kA for 1 sec, IP class 54, IP 67 for Tank. The rated voltage should be 12 kV, impulse withstand voltage of 75 kVp, Power frequency withstand voltage of 28 kV, rated short time current of 21 kA for 3 sec. The RMU should have SF6 gas insulation, robotic welding of gas tank. The RMU should be suitable for outdoo application. The manufacturer should have service centre in the state of uttarakhand. | BI01010001010000000000000515BI0100001422 | 1 | Nos |
298 | 298 | Supply,Installation, testing & Commissioning of double pole structure suitable for 11 KV HT system as per CEA & UPCL norms & comprising of the following ,but not limited to it for completion of works . RSJ pole of 9 mtrs length of size 175 X 90 mm complete with suitable MS base plate welded at bottom base plate - 2 nos.MS channel of size 100 X 50 mm , length 4 mtrs (approx.)11 KV AB switch - 1 set , 11 KV Horn gap fuse unit - 1 set , 11 KV Lightning Arrestor , 11 KV Disc Insulator , 11 KV pin insulator 6 swg copper wire for jumpering Supply and erection of stay set complete with necessary foundation , excavation, and refilling of earth etc. as required. Concrete foundation for RJS poles burried upto a depth of 1830mm in ground in a pit of size 450 X 450 mm in CC 1:3:6 along with 200 mm copping above ground inclusive of earth work.Necessary Nut , Bolts, Clamps, operating handle for AB switch , clamping welding etc. complete as required. Painting the RSJ poles complete with two coat of red oxide and two coats of GI enamel paints complete as required. | BI01010001010000000000000515BI0100001423 | 1 | Sets |
299 | 299 | Supply, installation, testing and commissioning of outdoor TYPE, OIL type transformer with copper winding having a continuous rating of 160 kVA, 11kV/415 +/- 1% V, 3 phase, 50 Hz, DY-11 vector group, The transformer shall have cable end box for indoor termination of HT cable on HT side and Cable Box for indoor termination on LT side, complete in all respects including standard accessories. It is To be installed on Top of two pole structure with proper iron angle channel support as required.Compliance to BEE Standards AND BIS Standards (IS 1180). | BI01010001010000000000000515BI0100001424 | 1 | Nos |
300 | 300 | Supply of HT (UE) AL XLPE Cable of size 3 C X 120 sq mm | BI01010001010000000000000515BI0100001425 | 50 | mtrs |
301 | 301 | Supply,installation,testing and commissioning of MS C class Heavy duty pipe Inclueding forged fitting such as bends, tees, reducers,welding rods,two cote red oxide peimer and one cote post office red paint,angle,fastnor,two cote black japan etc. as follow ,100 mm line (approx.) C Class | BI01010001010000000000000515BI0100001426 | 50 | Mtr. |
302 | 302 | Supply,installation,testing and commissioning of MS C class Heavy duty pipe Inclueding forged fitting such as bends, tees, reducers,welding rods,two cote red oxide peimer and one cote post office red paint,angle,fastnor,two cote black japan etc. as follow., 80mm line (approx.) C Class | BI01010001010000000000000515BI0100001427 | 6 | Mtr. |
303 | 303 | Supply,installation,testing and commissioning of MS C class Heavy duty pipe Inclueding forged fitting such as bends, tees, reducers,welding rods,two cote red oxide peimer and one cote post office red paint,angle,fastnor,two cote black japan etc. as follow ,.25mm line (approx.) C Class | BI01010001010000000000000515BI0100001428 | 12 | Mtr. |
304 | 304 | SITC of wrapping coating of pipe line in trenches | BI01010001010000000000000515BI0100001429 | 30 | Mtr |
305 | 305 | Supply,installation, testing and commissioning of single headed landing valve of 63mm dia. Made of SS hydrant valve complete with necessary fitting. | BI01010001010000000000000515BI0100001430 | 1 | Nos. |
306 | 306 | Supply,installation, testing and commissioning of RRL Hose pipe with 63mm dia. and 15mtr.length with SS male and female couplings. | BI01010001010000000000000515BI0100001431 | 2 | Nos. |
307 | 307 | Supply,installation, testing and commissioning of 63mm dia. SS short branch pipe nozzle suitable for instantaneous connection to hose coupling as required. | BI01010001010000000000000515BI0100001432 | 1 | Nos. |
308 | 308 | Supply,installation, testing and commissioning of MS hose box keeping two no.of RRL hose pipe and one no.of short branch pipe. | BI01010001010000000000000515BI0100001433 | 1 | Nos. |
309 | 309 | Supply,installation, testing and commissioning of two way fire brigade inlet connection suitable for local fire tender complete as required. | BI01010001010000000000000515BI0100001434 | 1 | Nos. |
310 | 310 | Supply,installation,testing and commissioning of swinging type first aid fire hose reel of 20mm internal dia and 30 mtr long with MS drum and 5mm shut of nozzle complete with fitting complete as required. | BI01010001010000000000000515BI0100001435 | 3 | Nos. |
311 | 311 | Supply,installation,testing and commissioning of gun matel body air release valve complete with all fitting as equired like ball vlave,holdtite,suta etc. | BI01010001010000000000000515BI0100001436 | 1 | Nos. |
312 | 312 | Supply,installation,testing and commissioning of Cast Iron body Butterfly Valve complte with all fitting as requied like MS flange, nut bolts,washers etc. 100 mm | BI01010001010000000000000515BI0100001437 | 3 | Nos. |
313 | 313 | Supply,installation,testing and commissioning of Cast Iron body Non return valve complte with all fitting as requied like MS flange, nut bolts,washers etc. 100 mm | BI01010001010000000000000515BI0100001438 | 2 | Nos. |
314 | 314 | Supply,installation,testing and commissioning of Pressure Gauge. (0-10kg). Make : H.Guru/Hebig | BI01010001010000000000000515BI0100001439 | 1 | Nos. |
315 | 315 | 16mm x 4core. From pump electric panel to fire pump . | BI01010001010000000000000515BI0100001440 | 40 | Mtr. |
316 | 316 | Supply,installation,testing and commissioning of gun matel body Ball Valve.25mm dia. | BI01010001010000000000000515BI0100001441 | 5 | Nos. |
317 | 317 | Supply,installation,testing and commissioning of pressure switch (maximum pressure range 10kg/sq high)for hydrant stand by and jocky pumps, complete as required. | BI01010001010000000000000515BI0100001442 | 1 | Nos. |
318 | 318 | Supply,installation,testing and commissioning of air vashal tank complete with all fitting like air release valve,ball valve,MS Flanges,holdtite,suta etc.(200mm dia x 2000mm length). | BI01010001010000000000000515BI0100001443 | 1 | Nos. |
319 | 319 | Supply,installation,testing and commissioning of Terrace tank made of zinc aluminium sheet and plastic lining 10,000 Ltr | BI01010001010000000000000515BI0100001444 | 1 | Nos. |
320 | 320 | Connection of terrace tank with existing water supply line | BI01010001010000000000000515BI0100001445 | 1 | Job |
321 | 321 | Supplying,Installatoin,Testing,& Commissioning of Terrace pumps of 450 lpm @ 45 mtr head | BI01010001010000000000000515BI0100001446 | 1 | Nos. |
322 | 322 | Supply, installation, testing and commissioning of starter for terrace pumps | BI01010001010000000000000515BI0100001447 | 1 | Nos. |
323 | 323 | RCC Hole Cutting | BI01010001010000000000000515BI0100001448 | 3 | Nos. |
324 | 324 | Digging of underground line | BI01010001010000000000000515BI0100001449 | 30 | Mtr. |
325 | 325 | Providing and fixing anti vivration mounting for pipe line,. 100 mm dia | BI01010001010000000000000515BI0100001450 | 1 | pc |
326 | 326 | Supply and installation of ABC powder stored pressure type portable fire extinguisher ISI marked 15683- 2006 & ISO - 9001, complete as required capacity - 6 kg | BI01010001010000000000000515BI0100001451 | 18 | pc |
327 | 327 | Supply and installation of CO2 type fire extinguisher ISI marked steel body 15683- 2006 & ISO - 9001, complete as required capacity - 4.5 kg | BI01010001010000000000000515BI0100001452 | 18 | pc |
328 | 328 | Supply and installation of Mechanical Foam (AFFF) type fire extinguisher ISI marked steel body 15683- 2006 & ISO - 9001, complete as required capacity - 9 ltr | BI01010001010000000000000515BI0100001453 | 3 | pc |
329 | 329 | Supply,installation of fire Bucket as per IS spacification with stand (holding four bucket). | BI01010001010000000000000515BI0100001454 | 5 | set |
330 | 330 | Supply, Installation, Testing and Commissioning of 5 HP Electric Driven Fire Pump suitable for auto/maual operation & consisting of following: complete in all respect like pump, motor, coupling etc. | BI01010001010000000000000515BI0100001455 | 2 | Set |
331 | 331 | Fabrication, Supplying, Installation, Testing & Commissioning of Starter for Pumps | BI01010001010000000000000515BI0100001456 | 2 | pc |
332 | 332 | SITC of Cable for pump 4cx6 mm Aluminium armoured | BI01010001010000000000000515BI0100001457 | 30 | Mtr |
333 | 333 | SITC of Foot Valve | BI01010001010000000000000515BI0100001458 | 2 | Nos. |
334 | 334 | Supply and fixing of GI line of 50 mmdia for pump room | BI01010001010000000000000515BI0100001459 | 12 | Mtr |
335 | 335 | Supply,installation,testing and commissioning of Cast Iron body Butterfly Valve complte with all fitting as requied like MS flange, nut bolts,washers etc. | BI01010001010000000000000515BI0100001460 | 2 | Mtr |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail