Military Engineer Services-MES has published Adn Altn Billet P413 , Provn Sept Tank For Billet Scorpio , Daggers , Baaz And Addl Lines Of 1016 , 1017 , Provn Of Exhst Fan At Mess No1 Ration Store , Provn Flame Proof Lightin Hygiene Chem Store , Provn Geyser 7 In Cert Smq , Provn Geyser 3 At Cert Pl. Submission Date for this Tender is 20-01-2021. Geyser Tenders in GE (AF) No.2 Jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 13-Jan-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-01-2021 |
Name of Work : ADDN/ ALTN TO BILLET NO P-413, PROVN OF SEPTIC TANKS FOR L/IN BILLETS OF SCORPIOS, DAGGERS, BAAZ AND ADDL LINES OF 1016 & 1017 BILLETS, PROVN OF QTY-01 EXHAUST FAN AT AIRMEN MESS NO -01 DRY RATION STORE, PROVN OF FLAME PROOF LIGHTING IN HYGIENE CHEMICAL STORE, PROVN OF GEYSERS QTY-07 (CAP-25 LTRS) IN CERTAIN SMQS AT AF STN JODHPUR AND PROVN OF GEYSERS QTY-03 (CAP-25 LTRS) AT CERTAIN PLACES AT AF STN MANDORE UNDER GE (AF) NO 2 JODHPUR | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | NOTE:-\nTHIS SCHEDULE CONSISTS OF SIX PARTS. THE RATES OF ITEMS OF SAME NATURE/ DESCRIPTION/ SPECIFICATIONS SHOULD BE QUOTED SAME RATE IN BOQ. ANY VARIATION IN QUOTED RATES IF ANY, LOWEST QUOTED RATE WILL CONSIDERED FOR ACCEPTANCE/ PAYMENT PLEASE.\n\nNAME OF WORK: ADDN/ ALTN TO BILLET NO P-413 AT AF STN JODHPUR | |||
2 | 2 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for (roof padding, concrete in sunken floor above ground floors) including roof treatment and removing from site all as specified and directed. | 5 | CUM | |
3 | 3 | M/L for cement concrete B-0. 1:2:4 (12.5mm graded aggregate) in padding finishing surface of concrete topping even and fair without using extra cement all as specified of average thickness 40 mm in slop 1:40 over roof | 40 | Sqm | |
4 | 4 | S&F in repairs, vitreous china wash down water closet pan (orrisa pattern),580x440mm white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets including PVC flushing pipe, 32 mm dia and fixed complete all as specified. | 10 | EACH JOB | |
5 | 5 | S&F in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. | 40 | EACH | |
6 | 6 | S&F in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete. | 4 | EACH | |
7 | 7 | S&F in repairs, 15 mm bore stop valve, fancy type, chromium plated with long shank and cup / (concealed type), screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions. | 72 | EACH | |
8 | 8 | S&F in repairs cast iron floor trap, 75 mm dia of outlet, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4). | 25 | EACH | |
9 | 9 | S&F in repairs cast iron nahani trap, 75 mm dia of outlet, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4). | 25 | EACH | |
10 | 10 | S&F in repairs 75 mm bore cast iron bend (any radius) with duck’s foot or heel rest with oval access door. | 25 | EACH | |
11 | 11 | S&F in repairs cast iron branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 75 mm bore pipe. | 25 | EACH | |
12 | 12 | S&F in repairs cast iron branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 100 mm bore pipe. | 20 | EACH | |
13 | 13 | Dismantling of cast iron or reinforced concrete drain pipes of 100 mm internal dia, jointed in cement mortar and taking out of trenches, if required. | 30 | RM | |
14 | 14 | Dismantling of cast iron or reinforced concrete drain pipes of 75 mm internal dia, jointed in cement mortar and taking out of trenches, if required. | 30 | RM | |
15 | 15 | S&F 100 mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls. | 30 | RM | |
16 | 16 | S&F in repairs 100 mm bore CI vent cowl. | 20 | EACH | |
17 | 17 | S&F 75 mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls. | 30 | RM | |
18 | 18 | Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed. | 95 | SQM | |
19 | 19 | M&L for rendering 15 mm thick in CM 1:4on stone masonry surfaces finished even and smooth without using extra cement.\n\n | 95 | SQM | |
20 | 20 | M&L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash. | 100 | SQM | |
21 | 21 | Taking up or down steel tubing 15 mm bore and connections including cleaning for refixing or removing from site. | 80 | RM | |
22 | 22 | Taking up or down steel tubing 20 mm bore and connections including cleaning for refixing or removing from site. | 40 | RM | |
23 | 23 | Taking up or down steel tubing 25 mm bore and connections including cleaning for refixing or removing from site. | 20 | RM | |
24 | 24 | Supply and laying 15 mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed. | 80 | RM | |
25 | 25 | Supply and laying 20 mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed. | 40 | RM | |
26 | 26 | Supply and laying 25 mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed. | 20 | RM | |
27 | 27 | M&L for 15 mm bore pipe line by providing elbow/union/socket/tank nipple/nipple up to 200 mm all as directed by Engineer-in-Charge. | 20 | EACH | |
28 | 28 | M&L 20 mm bore pipe line by providing elbow/union/socket/tank nipple/nipple up to 200 mm all as directed by Engineer-in-Charge. | 20 | EACH | |
29 | 29 | M&L 25 mm bore pipe line by providing elbow/union/socket/tank nipple/nipple up to 200 mm all as directed by Engineer-in-Charge. | 20 | EACH | |
30 | 30 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site and rubbish off the premises. | 70 | SQM | |
31 | 31 | M&L for joint free non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 | 40 | SQM | |
32 | 32 | M&L for glazed ceramic tiles, coloured, 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces. | 70 | SQM | |
33 | 33 | S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm. | 50 | EACH | |
34 | 34 | S&F in repairs grating doom 100 mm dia of PTMT (minimum weight 25 gms) | 25 | EACH | |
35 | 35 | Refixing of wash basin , Vitreous China (flat back or angle type ) any size , including cutting for pinning in ends of brackets or erecting stand exclusive of fixing of supply and waste pipe all as directed by Engr-In-Charge. | 16 | EACH | |
36 | 36 | M&L in repair for vitrous china urinal flat back bowl type complete including including providing and fixing plug size 465X355X265 mm white (minimum) with grating and union for discharge pipe All as spfd | 2 | Each | |
37 | 37 | S&F in repairs, 5.5 mm thick, 600 X 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with aluminium channel frame alround and 2 Nos. hanging clips & fixed to wooden plugs with CP brass screws and cup washers. | 16 | EACH | |
38 | 38 | S&F in repairs brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union. | 8 | EACH | |
39 | 39 | S&F PVC waste pipe of 32 mm bore of suitable length for WHB/urinal/sink, complete all as specified. | 16 | EACH | |
40 | 40 | Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc, including cleaning or refixing or removal from site all as specified and directed. (measured overall as fixed along the centre line over fittings and accessories) | 40 | RM | |
41 | 41 | S&F 75 mm bore UPVC (SWR) pipes type ‘A’, single socketed, in any length with rubber ring joints fixed to walls. | 20 | RM | |
42 | 42 | S&F 110 mm bore UPVC (SWR) pipes type ‘A’, single socketed, in any length with rubber ring joints fixed to walls. | 20 | RM | |
43 | 43 | S&F PVC (SWR) door bends 110 mm dia with acess door | 5 | Each | |
44 | 44 | -do- but 75 mm dia..with acess door | 5 | Each | |
45 | 45 | S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm with acess door | 5 | Each | |
46 | 46 | S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm with acess door | 5 | Each | |
47 | 47 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site.\nNote-Quoted rate shall be deemed to be include for cutting holes /demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.\n\n | 20 | EACH | |
48 | 48 | S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing. | 100 | RM | |
49 | 49 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site as per specification & drawing. | 40 | SQM | |
50 | 50 | S&F factory made shutters 35 plain framed , panelled shutter(two) panel with lock rail and panel of 9mm BWP commercial pply 12 mm veenered particle board with commercial vennering on both faces .The size of rail and stile as per IS:1003 (part-1) kiln seasnoned and chemically presssure treated complete all as specified and directed by Engr-In-charge | 10 | Sqm | |
51 | 51 | M/L for Glazed and skeleton shutters of thickness 35mm of IInd class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats note: Glazed or clothetc in panelsor sash square shall be measured seperately | 10 | Sqm | |
52 | 52 | M&L framed brackets of angles or tees with web and flanges cut to counter sunk for screws , including bending and welding angels as necessary gusset plates rivetting etc not exc 10 kg each brackets , conforing to Fe-290 Gde E 165 | 3000 | Kg | |
53 | 53 | M&L prepration of new steel surfaces & applying two coats of synthetic enamel paint over a coat of red oxide primer. | 140 | SqM | |
54 | 54 | S&F for 100 mm long butt hinges, medium weight stainless steel | 18 | Each | |
55 | 55 | S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed. | 40 | EACH | |
56 | 56 | S&F aluminium handles, cast type, anodized, of size 100mm. | 40 | EACH | |
57 | 57 | S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane. | 40 | Sqm | |
58 | 58 | M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones. | 40 | Sqm | |
59 | 59 | Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm all as specified and directed by Engr-in-charge | 50 | EACH | |
60 | 60 | S&F in repairs galvanised mild steel wire cloth , 0.56 mm nominal dia of wire and avg width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples , complete all as directed by Engr-In-Charge | 70 | EACH | |
61 | 61 | S&F for 100 mm long butt hinges, medium weight stainless steel | 30 | Each | |
62 | 62 | M&L15 mm thick screed bed with CM 1:4 with water proofing compound @ 3% by weight of cement finish even and smooth surfaces using without extra cement. Water proofing compound shall be measured and paid seperately | 220 | Sqm | |
63 | 63 | M/L for cement concrete B-0. 1:2:4 (12.5mm graded aggregate) in padding finishing surface of concrete topping even and fair without using extra cement all as specified of average thickness 40 mm in slop 1:40 over roof | 170 | Sqm | |
64 | 64 | M/L APP modified membrane minium weighting 3 Kg/Sqm with polyster non woven polyster reinforcement ( weight not less than 150 gms/sqm )shall be laid by torch application method and overlapped by 100 mm in all sides as directed by Engr-in-Charge | 170 | Sqm | |
65 | 65 | M&L for providing and injecting chemical emulsion for post construction anti termite treatment along external wall where the apron is not provided using chemical emulsion at therat of 7.5 ltr per sqm of the vertical surface of the sub structure to a depth of 300 mm including excavating channel along the wal and rodding etc complete all as specified and directed | 50.5 | Sqm | |
66 | 66 | Supply only integral water proofing compound ISI marked | 250 | Kg | |
67 | 67 | Taking down carefully copper/aluminium point wiring (light, fan , socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendent, regulators light fittingsocket, removing materials to store for keeping in safe custody or for re use for taking credit (Credit for above items should be made as per conditions seperatly) and making good disturbed surfaces or wall floor etc. | 68 | Per Point | |
68 | 68 | M&L for point wiring complete with 1.5 sqmm single core multi stranded FRLS Copper conductor PVC insulated and unsheathed 650/1100 volt grade drawn through and including PVC conduit fixed on wall surface/concealed in wall including pressed steel terminal sunken boxes with 2 mm thick plastic laminated sheet for mounting of switches, socket , regulator etc incl 1.5 sqmm PVC insulated FRLS copper multi stranded copper conductor used as earth wire and making good disturbed surface of wall /floor etc | |||
69 | 68.01 | One light point controlled by one switch 5 amp one way | 68 | Per Point | |
70 | 68.02 | One Exhaust fan point controlled by one switch | 16 | Per Point | |
71 | 69 | S&F switch piano 5 amps flush type single pole one way Make SSK Top line/Anchor penta PC | 250 | Each | |
72 | 70 | S&F switch piano 16 amps flush type single pole one way Make SSK Top line/Anchor penta PC | 50 | Each | |
73 | 71 | S&F socket outlet flush type 5 pin 6 amps Make SSK Top line/Anchor penta PC | 155 | Each | |
74 | 72 | S&F socket outlet 2 in 1, 5 pin 16 amps flush type Make SSK Top line/Anchor penta PC | 50 | Each | |
75 | 73 | Supply and fixing Steped type elecrtonic fan regulator flash type on the existing phenolic laminated sheet etc suitable for 240 volt Make :- Legrand/ Havells or eqivallent | 75 | Each | |
76 | 74 | Supply and fixing ceiling rose polycarbonate ,isolated body 65 X 50 mm 2 to 3 terminal Make :- SKS Top line/Anchor | 300 | Each | |
77 | 75 | M&L Cast Iron/Pressed steel terminal boxes 60mm deep for mounting, switches, socket, fan regulator etc with 3 mm thick plastic laminated sheet cover size of 100 mm x 100 mm complete all as specified and as directed by Engr-in-Charg. | 100 | Each | |
78 | 76 | M&L Cast Iron/Pressed steel terminal boxes 60mm deep for mounting, switches, socket, fan regulator etc with 3 mm thick plastic laminated sheet cover size of 200 mm x 150 mm complete all as specified and as directed by Engr-in-Charg. | 100 | Each | |
79 | 77 | M&L Cast Iron/Pressed steel terminal boxes 60mm deep for mounting, switches, socket, fan regulator etc with 3 mm thick plastic laminated sheet cover size of 250 mm x 300 mm complete all as specified and as directed by Engr-in-Charg. | 100 | Each | |
80 | 78 | M & L for Point wiring complete with 1100 volts grade, single core, PVC insulated FR cable with multy-stranded copper conductor of size 4sq mm nominal area, drwan through and including rigid,non-metallic PVC conduit pipe of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FR caabl;e with multy-stranded copper conductor of size 2.5 sq mm nominal area, as continuous earthing wire connected to common earth dolly including 1.6mm thick fabricated MS sheet/electroplated terminal box, for mounting switches/ switch socket combination/ fan regulators etc covered with 3mm thick hylam sheet complete for one 15 Amps switch socket out let point on indipendent board all as specified and as directed. | 8 | Per Point | |
81 | 79 | Taking down submain wiring of any size and capacity. | 485 | RM | |
82 | 80 | M&L for sub main wiring with two single core PVC insulated multi stranded copper conductor cable of size 4 sqmm 650/1100 volt grade (ISI marked ) drawn through in and including PVC heavy duty 25 mm bore conduit concealed in OR fixed on wall & conduit accessories thickness should not be less than 1.8 mm fixing in wall with clamps with 2.5 sqmm single core multi stranded copper conductor as earth continuity to common earth duly as earth wire . Note : Two run of wire and one run of wire & conduit will be measured and paid as one length | 485 | RM | |
83 | 81 | Supply and fix Water heater storage type , electric 240 volts of capacity 50 litres, BEE 5 star rated. Complete all as speficied and directed by engr-in-Charge Make :- Racold Platinum plus | 8 | Each | |
84 | 82 | Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 10 Amps 240 volts 50 Hz complete all as specified and as directed.\n\n\n\n\n | 8 | Each | |
85 | 83 | Taking down old unsv and S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 4 ways. Make - Make - Legrand /Havells or equivalent in Schneider or Hager as approved. | 4 | Each | |
86 | 84 | Taking down old unsv and S&F in repair LED batten (1.2 m) made of CRCA sheet housing with a Trimline a robust and high performance Efficiance 100 lumen/watt complete. Make - Crompton Cat No LDL-20NW or equivalent in Philips/Wipro. | 68 | Each | |
87 | 85 | S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB SPN 40 amp. Make Legrand or equivalent model of Hyger/siemens. | 4 | Each | |
88 | 86 | S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Single pole 6 to 32 amp. Make Legrand or equivalent model of Hyger/siemens. | 16 | Each | |
89 | 87 | NAME OF WORK: PROVN OF SEPTIC TANKS FOR L/IN BILLETS OF SCORPIOS, DAGGERS, BAAZ AND ADDL SEWAGE LINES OF 1016 & 1017 BILLETS AT AF STN JODHPUR | |||
90 | 88 | Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed. | 5 | Cum | |
91 | 89 | Demolition and breaking up drain pipes, 100/150/200 mm internal dia (Salt glazed stoneware, AC or reinforced concrete) (internal dia) set in cement mortar including haunching and bed concrete. | 100 | RM | |
92 | 90 | Excavation over areas n, exc 1.50m deep and getting out soft/ loose soil. | 75.22 | Cum | |
93 | 91 | Ditto same as above but exc 1.50m but n.exc 3.0m deep | 44.68 | Cum | |
94 | 92 | Excavating in trenches in soft/loose soil, n.exc. 1.5m wide and n.exc 1.5 in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n.exc. 10 sqm on plan and n.exc 1.5m in depth and getting out. | 134.33 | Cum | |
95 | 93 | All as per item No 91 above but exc. 1.5 m but n.exc. 3.00 m in depth. | 5 | Cum | |
96 | 94 | Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm. | 117.46 | Cum | |
97 | 95 | Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point. | 136.16 | Cum | |
98 | 96 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site and rubbish off the premises. | 71 | SQM | |
99 | 97 | M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete all as specified and directed. | 16.67 | Cum | |
100 | 98 | M&L for squared rubble walling, Jodhpur type, brought up to courses, well bonded, bedded and solidly hearted, built in CM 1:4 | 62.85 | Cum | |
101 | 99 | M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement. | 15.56 | Sqm | |
102 | 100 | M&L for rendering 10 mm thick in CM 1:6 (internal ) on stone masonry surfaces finished even and smooth without using extra cement. | 113.52 | Sqm | |
103 | 101 | M&L for rendering 20 mm thick in CM 1:6 for slab top on stone masonry surfaces finished even and smooth without using extra cement. | 39.16 | Sqm | |
104 | 102 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. | 487.51 | Kg | |
105 | 103 | Ditto same as above but 6mm to 8mm dia | 217.46 | Kg | |
106 | 104 | Form work to soffits of syuspended slab such as roof slab , floor slab, landings and similar works not exceeding 200mm thick (horizontal or sloping ) | 20.8 | Sqm | |
107 | 105 | Reinforced cement concrete (nominalmix ) type B1 (1:2:4 ) using 20mm graded aggregate as in Slabs supported on walls beams and columns in floors roofs, landings balconies, canopies, deck slabs etc. | 13.9 | Cum | |
108 | 106 | Ditto as above but Beams, cantilevers, bressummers, lintels, over 1.50m span | 0.63 | Cum | |
109 | 107 | M&L for framed work as in doors, gates, of angle or other section with gussets plates, rails, braces, etc. | 17.2 | Kg | |
110 | 108 | S&F 100 mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls. | 11 | RM | |
111 | 109 | S&F 100 mm bore CI vent cowl. | 2 | EACH | |
112 | 110 | M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate in cills, steps, bands, copings, bed plates, blocks for inserting hold fasts etc. and the like including weathering, slightly rounded or chamfered angles and throating as directed. | 2 | Cum | |
113 | 111 | M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in surface channels, drains (forming fair finished channel shall be measured and paid for separately). | 1 | Cum | |
114 | 112 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends, etc all as specified. | 10 | RM (Inner girth only measured) | |
115 | 113 | Add or deduct from item No. 112 above for each 25mm girth or part thereof over or under 30cm (this is only for adjustment of rates). | 0.01 | RM (Inner girth only measured) | |
116 | 114 | M&L for precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, shelves and similar articles with plain faces, set in CM 1:4, including necessary form work moulds etc all as specified. (Reinforcement shall be measured and paid for separately). | 1.82 | Cum | |
117 | 115 | M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested. | 230 | RM | |
118 | 116 | M&L for salt glazed stone ware drain pipes of 150 mm internal dia, grade `A’ ISI marked laid to slope in trenches, jointed in CM 1:1 and tested complete all as specified and as directed. | 230 | RM | |
119 | 117 | M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 200 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested. | 15 | RM | |
120 | 118 | M&L for salt glazed stone ware drain pipes of 200 mm internal dia, grade `A’ ISI marked laid to slope in trenches, jointed in CM 1:1 and tested complete all as specified and as directed. | 15 | RM | |
121 | 119 | S&F 75 mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls. | 15 | RM | |
122 | 120 | Demolition of cement concrete of any description and in any position not otherwise specfically provided for | 5 | CUM | |
123 | 121 | M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floors, finishing cement concrete surface even & smooth with using extra cement. \n | 20 | SQM | |
124 | 122 | M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection. Concrete shall be laid in alternate bays n.exc 3 m in length finished fair and even including provision of joints of 6 mm wide and 10 mm deep along the wall and bays filled with bitumen mastic (1:3). | 98 | SQM | |
125 | 123 | S&F Non skid ceramic tiles coloured 7 to 8 mm thick area of each tiles exc. 0.06 Sqm but n. exc. 0.11 Sqm, in floor, set and jointed in neat cement slurry & pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6. | 30 | SQM | |
126 | 124 | M&L for glazed ceramic tiles, coloured, 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces. | 41 | SQM | |
127 | 125 | S&F salt glazed stoneware gully traps of size 150 x 150 mm, square or rounded mouthed, type `P' fixed in CM 1:6 and cover with RCC cover slab of size 200 X 200 X 50mm | 10 | Each | |
128 | 126 | M&L for PVC (SWR), 75mm dia of floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) | 10 | Each | |
129 | 127 | S&F in repair for Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) | 25 | Each | |
130 | 128 | S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, including PVC 'P' trap, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish. | 3 | EACH | |
131 | 129 | M&L for construction of stone masonry soakage well 3.00 m dia and 3.00 m effective depth complete including excavation and earth work all as specified and shown on drg No. GE/AF/JODH/C-660/07 Sheet 1/1. | 3 | Each | |
132 | 130 | M & L for Construction of Sepptic tank 150 Users complete all as specified and directed by Engineer in charge. | 1 | Each | |
133 | 131 | NAME OF WORK: PROVN OF QTY 01 EXHAUST FAN AT AIRMEN MESS NO 1. DRY RATION STORE AT AF STN JODHPUR | |||
134 | 132 | Supply and fix heavy duty exhaust fan of 600 mm sweep 230 V AC single phase, 900 RPM complete with covers and shutters and all as specified and as directed. | 1 | EACH | |
135 | 133 | M & L Making Hole for fixing Exhaust Fan and good making plaster of hole complete all as specified as directed. | 1 | EACH | |
136 | 134 | M & L Sub main wiring using two single core PVC insulated cable 2.5 sqmm copper conductor multi standed and 1.5 sqmm copper conductor insulated cable using as earth wire and drawing in to PVC conduit.\n\nNote: Two runs of 2.5 Sqmm copper cable & one run of 1.5 Sqmm copper cable in and including 25 mm PVC conduit will be measured as one unit. | 15 | RM | |
137 | 135 | S & F Switch socket combination, multi purpose, flush type, universal pattern, 5 in 1, 3 pin 5/16 Amps all as specified and as directed. | 1 | EACH | |
138 | 136 | NAME OF WORK: PROVN OF FLAME PROOF LIGHTING IN HYGIENE CHEMICAL STORE AT AF STN JODHPUR | |||
139 | 137 | Material & Labour for point wiring (surface type) with 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) sheathed single core stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn in and including 25 mm size PVC rigid metallic in stove enamelled steel conduit with all steel conduit fittings & accessories with 1.60 mm thick pressed steel or mild steel sheet sunk box covered with including 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) sheathed single core stranded copper conductor (flame retardant) cable as earth continuity conductor connected to main switch/ 'DB's or common earth dolly for one light/fan/switches, switch socket combination, controlled by one 5/6 amps one way switch etc complete all as specified and as directed. | 5 | Points | |
140 | 138 | Material & Labour for point wiring (surface type) with 2.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) sheathed single core stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn in and including 25 mm size PVC rigid metallic in stove enamelled steel conduit with all steel conduit fittings & accessories with 1.60 mm thick pressed steel or mild steel sheet sunk box covered with including 2.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) sheathed single core stranded copper conductor (flame retardant) cable as earth continuity conductor connected to main switch/ 'DB's or common earth dolly for one light/fan/switches, switch socket combination, controlled by one 5/6 amps one way switch etc complete all as specified and as directed. | 2 | Points | |
141 | 139 | Supply & fixing flurescent tube light fitting flameproof type FLP-WP OF 2X40 watt including integral reflector made of alluminium alloy LM6 with electronic ballast bipin holders connector block etc and all accessories pre wired and including connecting up with twin core twisted flexible copper conductor with suitable size | 3 | Each | |
142 | 140 | Supply and fix flame proof rotary type with termination box in LM6 16 amps single pole 250 volts | 5 | Each | |
143 | 141 | Supply and fixing flame proof switch socket and plug combined in LM6 cable termination box in LM6 16 amps single pole 250 volt 2 pin and earth | 2 | Each | |
144 | 142 | Junction box LM6 with plain cover 25mm entry size and 80 mm dia in 3 way complete of make Sudhir Switch gear Pvt Ltd Caat No . JB/OA/104 or equivalent make of Baliga, Alsthom, GEC, Flexpro & certified by CMRI Dhanbad all as directed by Engineer-in-Charge | 3 | Each | |
145 | 143 | S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole and neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators after and including taking down old DB with MCB complete all as specified and as directed.(Make : Legrand cat No 607701 or equivalent & approved model of SIEMENS/ MERLIN GERIN make). | 1 | Each | |
146 | 144 | S&F MCB, Single pole & neutral, 40 to 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed (Make : Legrand Cat No 603255 to 603257 or equivalent & approved model of SIEMENS/ MERLIN GERIN make). | 1 | Each | |
147 | 145 | S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and as directed (Make : Legrand Cat No 603231 to 603237 or equivalent & approved model of SIEMENS/ MERLIN GERIN make). | 6 | Each | |
148 | 146 | NAME OF WORK: PROVN OF GEYSERS IN CERTAIN SMQS AT AF STN JODHPUR | |||
149 | 147 | Supply install testing and commissioning of water heater storage type, electric supplied and installed complete capacity 25 Ltr with BEE 5 star rated complete all as specified and as directed. | 7 | Each | |
150 | 148 | M & L Point wiring complete with 1100 volts grade, single core, PVC insulated FRLSH cable with multy-stranded copper conductor of size 4 sqmm nominal area, drwan through and including rigid,non-metallic PVC conduit pipe of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLSH cable with multy-stranded copper conductor of size 2.5 sqmm nominal area, as continuous earthing wire connected to common earth dolly including 1.6mm thick fabricated MS sheet/electroplated terminal box, for mounting switches/ switch socket combination/ fan regulators etc covered with 3mm thick hylam sheet complete for one 15 Amps switch socket out let point on indipendent board all as specified and as directed. | 7 | Point | |
151 | 149 | M & L Single pole and neutral enclosure with a two pin and earth plug and socket copmplete with one single pole 20 Amps MCB complete all as specified and as directed. | 7 | Each | |
152 | 150 | M & L Cutting in position and providing Tee 25x15mm screwing the existing GI tubing for addn/altns of size 25 mm dia complete all as specified and as directed. | 7 | Each | |
153 | 151 | S & F GI Tubes 15 mm dia, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. | 28 | RM | |
154 | 152 | Supply & fix Bib taps 15 mm brass chormium plated with curtch or butterfly handle complete all as specified and as directed. | 7 | Each | |
155 | 153 | Supply & Fix Valve stop screwed supplied and installed complete for size 15 mm dia. complete all as specified and as directed. | 14 | Each | |
156 | 154 | Supply & Fix PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. | 14 | Each | |
157 | 155 | NAME OF WORK: PROVN OF GEYSERS IN CERTAIN SMQS AT AF STN JODHPUR | |||
158 | 156 | Supply and fix water heater storage type electric, capacity 25 Ltrs BEE, 5 Star Rated complted all as specified and directed. | 3 | Each | |
159 | 157 | M & L for sub main wiring with 2 runs of 6 Sqmm (Phase & Neutral) and one of 6sqmm for earth contunity conductior PVC insulated unsheather FR grade cable with copper conductor multi standed 1100 V grade confiriming to IS-694 drawn through and including surface PVC rigid conduit 32MM size with accessories all as specified and directed by Engr-in-Charge.\nNote:- (a) 2 runs of 6 sqmm + 1 run of 4 sqmm cable + 1 run of PVC rigid conduit shallbe measured as one unit leangth. | 30 | RM | |
160 | 158 | M & L Single pole and neutral enclosure with a two pin and earth plug and socket copmplete with one single pole 20 Amps MCB complete all as specified and as directed. | 3 | Each | |
161 | 159 | M & L Cutting in position and providing Tee 25x15mm screwing the existing GI tubing for addn/altns of size 25 mm dia complete all as specified and as directed. | 3 | Each | |
162 | 160 | S & F GI Tubes 15 mm dia, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. | 20 | RM | |
163 | 161 | Supply & fix Bib taps 15 mm brass chormium plated with curtch or butterfly handle complete all as specified and as directed. | 3 | Each | |
164 | 162 | Supply & Fix Valve stop screwed supplied and installed complete for size 15 mm dia. complete all as specified and as directed. | 6 | Each | |
165 | 163 | Supply & Fix PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. | 6 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail