Maintenance Of Residential And Non-Residential Govt . Building ( Pwd Sub-Division Office And Type-Ii And Iv Quaters ) Under Melaghar Pwd ( R And B ) Sub-Division During The Year 2020-2021 .
Tender Value
5.49 Lakhs
Estimated cost
Bid Submission
15 Jan 2021
0 days left
EMD
5498
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonamura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Of Residential And Non-Residential Govt . Building ( Pwd Sub-Division Office And Type-Ii And Iv Quaters ) Under Melaghar Pwd ( R And B ) Sub-Division During The Year 2020-2021 .
BOQ
| Name of Work: Maintenance of residential and non-residential Govt. Building (PWD Sub-Division Office and Type-II & IV quaters) under Melaghar PWD (R&B) Sub-division during the year 2020-2021. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling old plaster or pointing ,racking out joints,cleaning and preparing the surface for replastering or repointing including disposal of rubbish to the dumping ground with all leads and lifts etc. complete as per direction of engineer in charge. | BI01010001010000000000000515BI0100001113 | 331 | sqm |
| 2 | 2 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessery repairs to scratches etc. complete. | BI01010001010000000000000515BI0100001114 | 370 | sqm |
| 3 | 3 | Dismantling doors ,windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead. of area 3 Sqm and below. | BI01010001010000000000000515BI0100001115 | 4 | nos |
| 4 | 4 | Dismantling wood work in frames,trusses,purlins and rafters up to 10 meters span and 5 meters height including stacking the material within 50 meters lead Of sectional area 40 Sq cm and below. | BI01010001010000000000000515BI0100001116 | 21 | mtr |
| 5 | 5 | Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials with all lifts and upto a lead of 50mtr etc. complete as per direction of the Engineer In charge. \nin cement mortar. | BI01010001010000000000000515BI0100001117 | 8.125 | cum |
| 6 | 6 | Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the engineer in charge.\nNominal concrete 1:3:6 Or richer mix. | BI01010001010000000000000515BI0100001118 | 0.9 | cum |
| 7 | 7 | Dismantling GI pipes including excavation and refilling trenches after taking out the pipes,manually/ by mechanical means including stacking of pipes within 50 meters lead as per direection of Engineer in charge.\n15 mm to 40 mm nominal bore. | BI01010001010000000000000515BI0100001119 | 60 | mtr |
| 8 | 8 | Dismantling of flushing cistern of all types (CI/PVC/Vitrious china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead. | BI01010001010000000000000515BI0100001120 | 4 | nos |
| 9 | 9 | First class brick work in superstructure above plinth level &up to floor-five level including cost of all materials as required complete.\nIn cement mortar 1:6 (1 cement:6 fine sand) | BI01010001010000000000000515BI0100001121 | 0.75 | sqm |
| 10 | 10 | Providing and fixing ISI marked flush door shutters conforming to IS:2202 (part1) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical gtrains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked stainless steel butt hinges with necessary screws. | BI01010001010000000000000515BI0100001122 | 2 | sqm |
| 11 | 11 | Providing Wood Work in frames of doors,windows,clerestory windows and other frames,wrought framed and fixed in position:Local Teak wood. | BI01010001010000000000000515BI0100001123 | 0.04 | cum |
| 12 | 12 | Providing 40x5mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete blocks 30x10x15 cm 1:3:6 mix. | BI01010001010000000000000515BI0100001124 | 6 | nos |
| 13 | 13 | Providing and fixing ISI marked oxidised MS sliding door bolts with nuts and screwsetc. Complete. 300x16 mm | BI01010001010000000000000515BI0100001125 | 5 | nos |
| 14 | 14 | Providing and fixing ISI marked oxidised MS tower bolts black finish,(barrel type) with necessary screws etc. Complete. 250x10 mm | BI01010001010000000000000515BI0100001126 | 5 | nos |
| 15 | 15 | Providing and fixing ISI marked oxidised MS handles conforming to IS:4992 with necessary screws etc. complete. 125mm. | BI01010001010000000000000515BI0100001127 | 8 | nos |
| 16 | 16 | 15 mm cement plaster on the rough side of single or half brick wall of mix. Cement moratr 1:3 (1 cement:6 fine sand) | BI01010001010000000000000515BI0100001128 | 53 | sqm |
| 17 | 17 | Providing and fixing aluminium work for doors,windows,ventilators and partions with extruded built up standard tubular sections / appropiate Z sections and other sections of approved make conforming to IS:733 and IS: 1285,fixing with dash fasteners of required dia and size,including necessery filling up of gaps at junctions,i.e. at top,bottom, and sides with required EPDM rubber/neoprene gasket etc. Alluminium sections shall be smooth,rust free,straight, mitred and jointed mechanically whereever required including clit angle,alluminium snap beading for glazing/panelling, CP brass/ stainless steel screws,all complete as per architectural drawing and the direction of Engineer in charge. (glazing and panelling and dash fasteners to be paid for separetely):- For fixed portion of approved quality :- Anodised alluminum (anodised transparent or dyed to required shade according to Is: 1868,Minimum anodic coating of grade AC15) | BI01010001010000000000000515BI0100001129 | 50 | kg |
| 18 | 18 | For shutters of doors,windows & ventilators including providing and fixing hinges /pivots and making provision for fixing fittings whereever required including the cost of EPDM rubber / neoprene gasket required (fittings shall be paid for separately).:\nAnodised alluminium(anodised transparent or dyed to required shade according to Is: 1868,Minimum anodic coating of grade AC15) | BI01010001010000000000000515BI0100001130 | 72 | kg |
| 19 | 19 | Providing and fixing glazing of approved quality in alluminium doors, windows,ventilator,shutters, and partitions etc. with EPDm rubber/ neoprene gasket etc. Complete as per architechtectural drawing and the direction of engineer in charge (cost of snap beading shall be paid in basic item:- \nWith float glass panes of 4.0 mm thickness (weight not less than 10.0 kg /sqm). | BI01010001010000000000000515BI0100001131 | 7 | sqm |
| 20 | 20 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on old work (one or more coats ), to give an even shade as required complete as per direction of the Engineer in charge. | BI01010001010000000000000515BI0100001132 | 402 | sqm |
| 21 | 21 | Finishing walls with premium acrylic smooth exterior paint of required shade of approved brand and manufacture on old work (one or more coats ) including preparation of surface as required complete as per direction of the engineer in charge. | BI01010001010000000000000515BI0100001133 | 348 | sqm |
| 22 | 22 | Applying priming coat (payment shall be made after submission of test certificate issued by the manufacture):-with ready mixed Pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) | BI01010001010000000000000515BI0100001134 | 6 | sqm |
| 23 | 23 | Painting with synthetic enamel paint ( one or more coats ) of required colour of approved brand and manufacture on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge. | BI01010001010000000000000515BI0100001135 | 34 | sqm |
| 24 | 24 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231,with all fittings and fixtures complete. 10 litre capacity white. | BI01010001010000000000000515BI0100001136 | 4 | nos |
| 25 | 25 | Providing and fixing P.VC waste pipe for sink or wash basin including P.V.C waste fittings complete. Flexible Pipe.32 mm dia. | BI01010001010000000000000515BI0100001137 | 7 | nos |
| 26 | 26 | Providing and fixing GI pipes of medium class as per IS:1239 with latest amendment complete with GI fittings and clamps,including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer in charge. \n15 mm dia.nominal bore | BI01010001010000000000000515BI0100001138 | 12 | mtr |
| 27 | 27 | Providing and fixing GI pipes of medium class as per IS:1239 with latest amendment complete with GI fittings and clamps,including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer in charge. \n20 mm dia.nominal bore | BI01010001010000000000000515BI0100001139 | 8 | mtr |
| 28 | 28 | Providing and fixing GI pipes of medium class as per IS:1239 with latest amendment complete with GI fittings and clamps,including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer in charge. \n25 mm dia.nominal bore | BI01010001010000000000000515BI0100001140 | 9 | mtr |
| 29 | 29 | Providing and fixing GI pipes of medium class as per IS:1239 with latest amendment complete with GI fittings and clamps,including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer in charge. \n40 mm dia.nominal bore | BI01010001010000000000000515BI0100001141 | 8 | mtr |
| 30 | 30 | Providing and fixing brass bib cock of approved quality:\n15 mm dia.nominal bore | BI01010001010000000000000515BI0100001142 | 5 | nos |
| 31 | 31 | Providing and fixing brass bib cock of approved quality:\n20 mm dia.nominal bore | BI01010001010000000000000515BI0100001143 | 5 | nos |
| 32 | 32 | Providing and fixing brass stop cock of approved quality:\n15 mm dia.nominal bore | BI01010001010000000000000515BI0100001144 | 6 | nos |
| 33 | 33 | Providing and fixing brass stop cock of approved quality:\n20 mm dia.nominal bore | BI01010001010000000000000515BI0100001145 | 6 | nos |
| 34 | 34 | Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end)\n25 mm dia.nominal bore | BI01010001010000000000000515BI0100001146 | 6 | nos |
| 35 | 35 | Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end)\n40 mm dia.nominal bore | BI01010001010000000000000515BI0100001147 | 6 | nos |
| 36 | 36 | Providing and fixing gun metal non return valve of approved quality (screwed end)\n25 mm dia.nominal bore | BI01010001010000000000000515BI0100001148 | 5 | nos |
| 37 | 37 | Providing and fixing gun metal non return valve of approved quality (screwed end)\n40 mm dia.nominal bore | BI01010001010000000000000515BI0100001149 | 5 | nos |
| 38 | 38 | Painting GI pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat,both of approved quality for new work.\n15 mm dia.nominal bore | BI01010001010000000000000515BI0100001150 | 12 | mtr |
| 39 | 39 | Painting GI pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat,both of approved quality for new work.\n20 mm dia.nominal bore | BI01010001010000000000000515BI0100001151 | 8 | mtr |
| 40 | 40 | Painting GI pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat,both of approved quality for new work.\n25 mm dia.nominal bore | BI01010001010000000000000515BI0100001152 | 8 | mtr |
| 41 | 41 | Painting GI pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat,both of approved quality for new work.\n40 mm dia.nominal bore | BI01010001010000000000000515BI0100001153 | 8 | mtr |
| 42 | 42 | Providing and fixing GI Union in GI pipe including cutting and threading the pipe and making long screws etc. complete as per CPWD specification and direction of the engineer in charge. \n25 mm dia.nominal bore | BI01010001010000000000000515BI0100001154 | 10 | nos |
| 43 | 43 | Providing and fixing GI Union in GI pipe including cutting and threading the pipe and making long screws etc. complete as per CPWD specification and direction of the engineer in charge. \n40 mm dia.nominal bore | BI01010001010000000000000515BI0100001155 | 10 | nos |
| 44 | 44 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001156 | 3 | nos |
| 45 | 45 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. | BI01010001010000000000000515BI0100001157 | 3 | nos |
| 46 | 46 | Providing and fixing factory made door frame( single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60 mm width & 30 mm thickness and shall be fixed to wall as per instructions of Engineer in charge using 100x8 sheet metal CSK screws. | BI01010001010000000000000515BI0100001158 | 13.8 | mtr |
| 47 | 47 | Providing and fixing 28mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71 mm width & 28 mm thick as vertical &horizontal styles.joints are made using solvent adhesive and GI C section (39mmx19mmx0.6mmthick) or MS pipe (40mmx20mm) stiffener frame insert &telescopic polymetric L corners.The panel shall be filled with 3 mm thick high-pressure compact laminate as per manufacturers specifications and directions of the Engineer-in-chrge,cover moulding shall be provided foe covering fixing screws and elegant look.( foeW.C bathroom door shutter). | BI01010001010000000000000515BI0100001159 | 5.4 | sqm |
| 48 | 48 | Providing and fixing on wall face unplasticized Rigid PVC rain water, soil,waste & vent pipes (Working pressure 4 kg/cm2) conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion: Single Socketed Pipe-110 mm OD | BI01010001010000000000000515BI0100001160 | 33 | mtr |
| 49 | 49 | Providing and fixing on wall face unplasticized PVC moulded fittings/accessories for unplasticized Rigid PVC rain water, soil,waste & vent pipesconforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion:\nCoupler 110 mm | BI01010001010000000000000515BI0100001161 | 15 | nos |
| 50 | 50 | Providing and fixing on wall face unplasticized PVC moulded fittings/accessories for unplasticized Rigid PVC rain water, soil,waste & vent pipesconforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion:\nSingle equal tee without Door | BI01010001010000000000000515BI0100001162 | 15 | nos |
| 51 | 51 | Providing and fixing on wall face unplasticized PVC moulded fittings/accessories for unplasticized Rigid PVC rain water, soil,waste & vent pipesconforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion:\nSingle equal tee with Door | BI01010001010000000000000515BI0100001163 | 15 | nos |
| 52 | 52 | Providing and fixing on wall face unplasticized PVC moulded fittings/accessories for unplasticized Rigid PVC rain water, soil,waste & vent pipesconforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion:\nBend 87° | BI01010001010000000000000515BI0100001164 | 15 | nos |
| 53 | 53 | Providing and fixing on wall face unplasticized PVC moulded fittings/accessories for unplasticized Rigid PVC rain water, soil,waste & vent pipesconforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion:\nPlain shoe | BI01010001010000000000000515BI0100001165 | 15 | nos |
| 54 | 54 | Providing and fixing unplasticized PVC pipe clips of approved design to unplasticized -pvc rain water,soil, waste & vent pipes by means of 50x50x50 mm hard wood plugs,screwed with MS Screws of required length including cutting brick work and fixing with cement mortar 1:4 (1 cement: 4 fine sand) making good the wall etc.complete. 110 mm | BI01010001010000000000000515BI0100001166 | 15 | nos |
| 55 | 55 | Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement :5 fine sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :With Second class bricks | BI01010001010000000000000515BI0100001167 | 3 | nos |
| 56 | 56 | Constructing soak Pit 1.2mx1.2mx1.2m filled with brick bats including SW drain pipes 100 mm diameterand 1.20m long complete as per standard design. | BI01010001010000000000000515BI0100001168 | 1 | nos |
| 57 | 57 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil | BI01010001010000000000000515BI0100001169 | 11.25 | cum |
| 58 | 58 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete | BI01010001010000000000000515BI0100001170 | 0.619 | cum |
| 59 | 59 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001171 | 0.619 | cum |
| 60 | 60 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001172 | 9.563 | cum |
| 61 | 61 | First class brick work in foundation and plinth including cost of all materials as required complete. In cement mortar 1:6 ( 1 cement : 6 fine sand ). | BI01010001010000000000000515BI0100001173 | 1.13 | cum |
| 62 | 62 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). | BI01010001010000000000000515BI0100001174 | 18 | sqm |
| 63 | 63 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001175 | 765 | kg |
| 64 | 64 | 12 mm cement plaster of mix. Cement mortar 1:4 (1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001176 | 341.29 | sqm |
AI Tender Summary
Tender Timeline
Dec 26, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJan 15, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 15, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender