| 1 | 1 | Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification and as directed by the departmental officers. Morth - Rev V No. 111,112,401,900 | | 1688.5 | Cum |
|---|
| 2 | 2 | Providing and laying Wet Mix Macadam which shall consists oflaying and compacting clean, crushed, graded aggregate andgranular material, pre mixed with water, to a dense mass on aprepared sub grade/sub base or existing pavement as the casemay be in accordance with the requirements of the specificationslaying with Motor grader using base mix plant (PUGMILL) andcompacted with Earth Rammer 250mm thick in two layersof 125mm thick each. | | 1972 | Cum |
|---|
| 3 | 3 | Providing and laying prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 6 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete. | | 10018.5 | Sqm |
|---|
| 4 | 4 | Providing and laying tack coat of 2.5 kgs/10 sqm over the prime coat surface treated with primer using 2.5 kgs of 80/100 bitumen for 10 square meter area including cost of bitumen, including labour charges for applying the required quantity of bitumen as tack coat manually etc., complete. | | 9383.5 | Sqm |
|---|
| 5 | 5 | Providing and laying tack coat of 2kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Specifications | | 7057.5 | Sqm |
|---|
| 6 | 6 | Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min. required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20- 30t CMP with bitumen boiler, tipper trucks, Paver Finisher /9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5 | | 823 | Cum |
|---|
| 7 | 7 | Providing and laying Bituminous Concrete to 30mm thick using 0.13 cum of 19.00 - 9.50mm, 0.17cum of 9.50 -2.36mm and 0.26cum of 2.36 and below with 50.30kgs of VG30 / VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5. | | 494 | Cum |
|---|
| 8 | 8 | Providing and laying hot applied thermoplastic compound 2.50 mm thick including refletorising glass beads @ 250gms per sqm area thickness of 2.5mm exclusive of surface applied glass beads as per IRC:35 the finished surface to be leaved uniform and free from streets and holes. | | 705 | Sqm |
|---|
