Providing Of Mta, 117 ENGINEER REGIMENT, PIN-914117, C/O 56 APO-Jammu And Kashmir

Providing Of Mta , Supply Of Mta Store , Bukhari ( Field Heating Device ) Make:- Heatking ( Hk-5 ) , 1 . Water Heating Eqpt 500 Ltrs ( Hamam 500 Ltrs ) :- Manufacture And Supply Of Pre-Fabricated Stainless Steel Hamam Tank Made Of 3 Mm Thick Stainless Steel Sheet Stainless Steel Angle Frame & Legs Of Size 65 X 65 X 6Mm Thick To Include The Following Sizes , Fittings & Fixtures All As Per Shown In Drawing . Make :- Tata / Sail / Jindal ( A ) Length - 1 . 00M ( B ) Width - 1 . 00M ( C ) Height - 0 . 50M ( D ) Capacity - 0 . 50 Kl ( E ) Funnel For Pouring Cold Water , Welded At Top Surface Of Tank . ( F ) Bib Cocks Cp Brass ( Long Body ) 15Mm Dia Fixed At Locations As Shown In Drawing For Taking Out Hot Water . ( G ) 15 Mm Dia , 30Cm Long , Stainless Steel Tubing Light Grade Vent Pipe Welded At Top Of Tank For Exit Of Vapor . ( H ) Lifting Handles Made Of Stainless Steel Tubing 20Mm Dia Medium Grade Welded To Tank All As Per Shown In Drawing As Attached . ( J ) Stainless Steel Openable Type Lid Of 30 Cm Dia Fixed On Top Of Tank . ( K ) Drain Out Pipe 40Mm Dia Stainless Steel Tubing Medium Grade With Plug For Drain Out Of Water & Cleaning Of Tank . ( L ) Stainless Steel 65 X 65 X 6Mm Legs & Frame Work Of Tank All As Shown In Drawing . ( M ) Tank Shall Be Fixed On 1 . 5M X 1 . 5M X 0 . 75M Height Stage Made Of 30 Cm X 15Cm X 15 Cm Pcc Block . Pcc Block Shall Be Made Of Pcc 1:2:4 , Type B1 , ( Using 20Mm Graded Stone Aggregate ) And Supplied By The Contractor . ( N ) Heating Arrangement: Fuel Burner Suitable For Diesel / K-Oil Bhatti , Repair / Rewinding Of Motor Bhatti ,

Refer document

INR 10300.0 /-

Refer document

Name of Work : PROVN OF MTA
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Supply of MTA Store
2	1.01	Bukhari (Field Heating Device)\nMake:- HEATKING (HK-5)	Item1	25	Nos
3	1.02	1. Water Heating Eqpt 500 Ltrs (Hamam 500 Ltrs) :- \n Manufacture and supply of pre-fabricated Stainless steel Hamam Tank made of 3 mm thick Stainless Steel sheet Stainless steel angle frame & legs of size 65 x 65 x 6mm thick to include the following sizes, fittings & fixtures all as per shown in drawing . Make :- TATA/SAIL/JINDAL\n (a) Length - 1.00m\n (b) Width - 1.00m \n (c) Height - 0.50m \n (d) Capacity - 0.50 KL\n (e) Funnel for pouring cold water, welded at top surface of tank.\n (f) Bib cocks CP brass (long body) 15mm dia fixed at locations as shown in drawing for taking out hot water.\n (g) 15 mm dia, 30cm long, Stainless Steel tubing light grade vent pipe welded at top of tank for exit of vapor.\n (h) Lifting handles made of Stainless Steel tubing 20mm dia medium grade welded to tank all as per shown in drawing as attached.\n (j) Stainless Steel openable type lid of 30 CM dia fixed on top of tank. (k) Drain out pipe 40mm dia Stainless Steel tubing medium grade with plug for drain out of water & cleaning of tank.\n (l) Stainless Steel 65 x 65 x 6mm legs & frame work of tank all as shown in drawing.\n (m) Tank shall be fixed on 1.5m x 1.5m x 0.75m height stage made of \n 30 cm x 15cm x 15 cm PCC Block. PCC Block shall be made of PCC 1:2:4, type B1, (using 20mm graded stone aggregate) and supplied by the contractor.\n (n) Heating arrangement: Fuel burner suitable for diesel/K-oil Bhatti	Item2	1	Nos
4	1.03	Repair/Rewinding of motor Bhatti	Item3	14	Nos
5	Total in Figures