Supply Of All Kinds Of Aluminium Items For Different Construction Work Under Rd Satchand Division . Aluminium Works, O/o the Executive Engineer RD Satchand Division Sa-Tripura

Supply Of All Kinds Of Aluminium Items For Different Construction Work Under Rd Satchand Division . Aluminium Works-1 Providing & fitting fixing of anodized aluminium framed (24 series, 1.50mm thick ) upper part fixed & sliding shutter in 2 (two) track window as approved design of department with 4 mm thick plain or coloring glass etc and necessary accessories for suitable locking & handling arrangement for the complete job as per direction of Engineer-in-charge. 2 Providing & fitting fixing of anodized aluminium framed (24 series,1.50 mm thick ) upper part fixed & sliding shutter in 3 (three) track window as approved design of department with 4 mm thick plain or coloring glass etc and necessary accessories for suitable locking & handling arrangement for the complete job as per direction of Engineer-in-charge. 3 Providing & fitting fixing of anodized aluminium framed window upper part fixed & open able shutter in 2 (three) part (40 series, 1.50 mm thick ) with 4 mm thick plain or coloring glass etc and necessary accessories for the complete job as per direction of Engineer-in-charge. 4 Providing & fitting fixing of anodized aluminium framed window upper part fixed & open able shutter in 3 (three) part (40 series, 1.50 mm thick ) with 4 mm thick plain or coloring glass etc and necessary accessories for the complete job as per direction of Engineer-in-charge 5 Providing & fitting fixing of fixed aluminium framed partition with 12 mm prelaminated particle board / 4mm plain or coloring glass incl. door etc and necessary accessories as required for the complete job as per direction of Engineer-in-charge. 6 Providing & fitting fixing of fixed 1, 50 mm thick suitable aluminium framed partition with 4 mm plain or coloring glass providing opening for door etc and necessary accessories as required for the complete job as per direction of Engineer-in-charge. 7 Providing & fitting fixing of 1.5mm thick aluminium framed (3.5”x1.75”) door based on hydraulic floor spring, made of 12 mm pre-laminated board & 6mm thick plain or coloring glass in top with upper / lower closer and necessary accessories as required for the complete job as per direction of Engineer-in-charge. 8 Providing & fitting fixing of twin type door hydraulic floor spring based, made of 12 mm thick plain or coloring glass with suitable standard & approved aluminium frame in top and bottom including necessary accessories as required for the complete job as per direction of Engineer-in-charge. 9 Providing & fitting fixing of 1.5mm thick aluminium framed (3.5”x1.75”) hinge swing door made of 12 mm pre-laminated board & 6mm thick plain or coloring glass in top with necessary accessories as required for the complete job as per direction of Eng.-in-charge. 10 (B) Color coated aluminium framed Providing & fitting fixing of aluminium framed (24 series, 1.50mm thick ) upper part fixed & sliding shutter in 2 (two) track window as approved design of department with 4 mm thick plain or coloring glass etc and necessary accessories for suitable locking & handling arrangement for the complete job as per direction of Engineer-in-charge. 11 Providing & fitting fixing of aluminium framed (24 series,1.50 mm thick ) upper part fixed & sliding shutter in 3 (three) track window as approved design of department with 4 mm thick plain or coloring glass etc and necessary accessories for suitable locking & handling arrangement for the complete job as per direction of Engineer-in-charge. 12 Providing & fitting fixing of aluminium framed window upper part fixed & open able shutter in 2 (three) part (40 series, 1.50 mm thick ) with 4 mm thick plain or coloring glass etc and necessary accessories for the complete job as per direction of Engineer-in-charge. 13 Providing & fitting fixing of aluminium framed window upper part fixed & openable shutter in 3 (three) part (40 series, 1.50 mm thick ) with 4 mm thick plain or coloring glass etc and necessary accessories for the complete job as per direction of Engineer-in-charge. 14 Providing & fitting fixing of Curtain Wall over Aluminium Section with 5 mm reflective glass with necessary accessories as required for the complete job as per direction of Engineer – in-charge ( section Specification Sub Mullion 63 mm x 81 mm, Jointer 57.70 mm x 75.20 mm) 15 Providing & fitting fixing of aluminium fixed Louvers wiDTh of 60mm (VISTA) and fixed with rawl plugs, rivet and stainless screws with necessary accessories as required for the complete job as per direction of Engineer-in-charge. ( Section Specification Z Section 2.25” , U Section 2”. 16 Providing & fitting fixing of aluminium framed Louver (Horizontal Blinds) wiDTh of 25 mm (VISTA) and fixed with royal plugs and necessary accessories complete as per direction of Engineer-in-charge. 17 Providing & fitting fixing over aluminium section fir ACP work for exterior/interior purpose of the out side/in side of the building with 3 mm ACP Sheet (one side color) (ALSTRONG or EUROBOND) and fixed with rawl plugs and stainless steel screws with necessary accessories as required for the complete job as per direction of Engineer-in-charge. ( Section Specification: Squar: Tube:1”x1.5”,Angle:1”x1.5”). 18 Providing & fitting fixing of fixed aluminium partition with 4.5 mm ACP Sheet (Aluminium Composite Panel Sheet) ( both side color) ( ALSTRONG or EUROBOND) and fixed with rawl plugs and stainless steel screws with necessary accessories as required for the complete job as per direction of Engineer-in-charge.( Section Specification: SG: 2.5”X1.5”,DG:2.5”X1.5”.Taper Clip;75’, Angle: 1’x1.5”). 19 Providing & fitting fixing of fixed aluminium partition with 4 mm plain coloring glass ( SAINT GOBAIN OR MODI GURD) incl. with 4.5 mm ACP Sheet (Aluminium Composite Panel Sheet) ( both side color) ( ALSTRONG or EUROBOND) and fixed with rawl plugs and stainless steel screws with necessary accessories as required for the complete job as per direction of Engineer-in-charge. (Section Specification: SG: 2.5”X1.5”, DG:2.5” X1.5”.Taper Clip;75’, Angle: 1’x1.5”). 20 Providing Fitting Fixing of false ceiling over aluminium section with 600x600 mm panel with 12 mm thick gypsum board incl. aluminium painting and necessary accessories as required for the complete job as per direction of Engineer-in-charge. 21 Providing Fitting Fixing of fixed aluminium partition with 4 mm plain or coloring glass (SAINT GOBAIN OR MODI GURD) incl. door etc and necessary accessories as required for the complete job as per direction of Engineer-in-charge. 22 Providing Fitting Fixing of fixed aluminium partition with 12 mm pre laminated particle board/4 mm plain or coloring glass (SAINT GOBAIN OR MODI GURD) incl. door etc and necessary accessories as required for the complete job as per direction of Engineer-in-charge. 23 Providing Fitting Fixing of fixed aluminium door (with white colour coated) wqith 1.5 mm lower closer made of 12mm pre laminated particle board/6 mm plain or coloring glass ( SAINT GOBAIN OR MODI GURD) incl. door etc and necessary accessories as required for the complete job as per direction of Engineer-in-charge. 24 Providing Fitting Fixing of anodized aluminium door with 1.5 mm thick aluminium section and with upper/ lower closer made of 12 mm pre laminated particle board/6 mm thick plain or coloring glass ( SAINT GOBAIN OR MODI GURD) incl. door etc and necessary accessories as required for the complete job as per direction of Engineer-in-charge. 25 Providing Fitting Fixing of aluminium door (white color coated) with upper closer or floor spring made of 4.5 mm ACP sheet (Aluminium Composite panel Sheet) (both side color) (ALSTRONG or EUROBOND) and 6 mm thick plain or coloring glass (SAINT GOBAIN OR MODI GURD) incl. door etc and necessary accessories (ISI) as required for the complete job as per direction of Engineer-in-charge. (Section Specification: Square: Tube: 1”x1.5”, Angle: 1”x1.5”). 26 Providing Fitting Fixing of anodized aluminium door with upper closer or floor spring made of 4.5 mm ACP sheet (Aluminium Composite panel Sheet) (both side color) (ALSTRONG or EUROBOND) and 6 mm thick plain or coloring glass (SAINT GOBAIN OR MODI GURD) fixed with hydraulic floor screws and necessary accessories (ISI) as required for the complete job as per direction of Engineer-in-charge. .( Section Specification: Squar: Tube: 1”x1.5”,Angle:1”x1.5”). 27 Providing Fitting Fixing of aluminium door (white color coated) with 1.5 mm thick aluminium section and with made of 6 mm thick plain or coloring glass, hydraulic floor spring and necessary accessories as required for the complete job as per direction of Engineer-in-charge. 28 Providing Fitting Fixing of anodized aluminium door with 1.5 mm thick aluminium section and with made of 6 mm thick plain or coloring glass, hydraulic floor spring and necessary accessories as required for the complete job as per direction of Engineer-in-charge. 29 Providing Fitting Fixing of open able aluminium window (three part-middle part is fixed and other two parts open able) ( bronze color) with 1.5 mm thick aluminium section and with plain glass / coloring glass ( 4 mm thick, SAINT GOBAIN OR MODI GURD) etc and necessary job as per direction of Engineer-in-charge. 30 Providing Fitting Fixing of 3(three) track sliding Aluminium window (white color coated of thickness 50 micron) with 1.5 mm thick aluminium section and with plain glass/coloring glass (4 mm thick) (company name: SAINT GOBAIN OR MODI GURD) fixed with rawl plugs and stainless steel screws with necessary accessories as required for the complete job as per direction of Engineer-in-charge. 31 Providing Fitting Fixing of aluminium door ( Bronze color) with upper closer or floor spring made of 4.5 mm ACP sheet( Aluminium Composite panel Sheet) ( both side color) ( ALSTRONG or EUROBOND) and 6 mm thick plain or coloring glass ( SAINT GOBAIN OR MODI GURD) incl. door etc and necessary accessories as required for the complete job as per direction of Engineer-in-charge.(Section Specification : Squar: Tube:1”x1.5”, Angle: 1”x1.5”). 32 Providing Fitting Fixing of aluminium grill in window / open space with necessary accessories as required for the complete job as per direction of Engineer in-charge. 33 Providing Fitting Fixing of aluminium net in window / open space with necessary accessories as required for the complete job as per direction of Engineer-in-charge. 34 1st quality Aluminium square bar- 1//square bar (1 mm thick & 12/ long) 35 1st quality Alluminum square bar- 1.5//square bar (1 mm thick & 12/ long) 36 1st quality Alluminum square bar- 1//square bar (1.5 mm thick & 12/ long) 37 1st quality Alluminum square bar- 1.5//square bar (1.5 mm thick & 12/ long) 38 1st quality Alluminium handrail- 12/x2.5// (1.5mm thick) 39 1st quality Aluminium handrail- 12/x2// (1.5mm thick)

INR 1000 /-

INR 10000.0 /-

Refer document