Department Of Technical Education has published Procurement Of Machinery Equipment Group D. Submission Date for this Tender is 11-01-2021. LCR Meter Tenders in Various ITIs of JK UT Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Name of Work:Procurement of Machinery Equipment Group D (Electronic) | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Electronic Group | BI01010001010000000000000515BI0100001112 | ||
2 | 1.01 | LCR meter (Digital) : LCR meter (Digital) Microprocessor - controlled Inductance, Capacitance, Resistance measurement, Digital display. | item1 | 17 | Nos |
3 | 1.02 | CRO Dual Trace : CRO Dual Trace 20 MHz ( with component testing facilities) Necessary connecting probes etc. | item2 | 11 | Nos |
4 | 1.03 | Signal Generator, 0-100 KHz : Signal Generator, 0-100 KHz, Frequency / Amplitude controls, connecting probes etc. | item3 | 15 | Nos |
5 | 1.04 | Function generator : Frequency - 500 KHz or 1 MHz or above | item4 | 7 | Nos |
6 | 1.05 | Dimmer stat : 3 / 5 amps, Input 230 V, variable output 0-230V | item5 | 20 | Nos |
7 | 1.06 | Analog Component Trainer : Built in power supply fixed and variable supply, on board components like transistors, Diodes, Resistors, capacitors, inductors, potentiometers, SCR, TRIACS etc., patch cords for inter connecting components etc. | item6 | 20 | Nos |
8 | 1.07 | Op Amp trainer : Use as following: Inverting, non-inverting, Comparator Adder, Subtract, Integrator, Differentiator.\nBuilt– in required DC regulated power supply.\nBuilt–in resistors, capacitors and potentiometers\nTest points at various stages in the circuit to observe the waveforms and voltages in the circuit, with patch cords for inter connections. | item7 | 22 | Nos |
9 | 1.08 | Digital IC Trainer : Built in power supply providing regulated DC for operation Logic inputs switches,\n LEDs for observing output\nComponents On board:\nNOT, AND, OR, NOR, NAND and XOR gates\n4 Bit Universal Shift Register\n4 Bit Adder/Sub tractor\nFlip Flops - RS, JK, Multiplexer, De multiplexer, Encoder, Decoder, Patch Cords for inter connections. | item8 | 25 | Nos |
10 | 1.09 | Digital IC Tester : Tests a wide range of Digital IC's such as 74 Series, 40/45 Series of CMOS IC’s Microprocessor 8085, 8086, Z80, 8051, 89c51, Peripherals like 8255, 8279, 8253, 8251, 8155,6264,62256, LCD or LED Display etc. | item9 | 23 | Nos |
11 | 1.1 | Digital and Analog bread board trainer : In built fixed / Variable DC supply + -5V, + - 12V, + - 15V, TTL/CMOS logic Level input switches, LED Indicators output, BCD 7 segment display, On board Logic pulsar , signal generator - sine, square & triangular, with patch cords for inter connections. | item10 | 46 | Nos |
12 | 1.11 | Rheostats : 1 to 1.5 amps, 50 ohms, 100ohms, 300ohms etc. | item11 | 38 | Nos |
13 | 1.12 | Electronic circuit simulation software : Electronic circuit simulation software with 6 user licenses, for circuit designing n simulation. | item12 | 25 | Nos |
14 | 1.13 | DSO ( colour) : 2/4 Channel, 50/60 MHz, Real time Sampling , Memory with PC Interface USB, LAN and math function includes +. - , FFT, differential, integral, log. Etc. | item13 | 14 | Nos |
15 | 1.14 | Soldering & De soldering Station : Soldering iron 15 to 60 W. Input voltage 170 to 270 V,Temperature range 180C to 270C or above, DE soldering gun 70 Watts, Input 170 to 270 V AC, Temp range 180 C to 480 C. | item14 | 39 | Nos |
16 | 1.15 | SMD Soldering & De soldering : SMD Soldering & De soldering Station with necessary accessories - Hot Air Soldering & DE soldering Station for SMD work with temperature & air flow control. | item15 | 17 | Nos |
17 | 1.16 | DOL starter : DOL starter for ¼ HP single phase AC motor | item16 | 17 | Nos |
18 | 1.17 | AC motor ¼ HP : AC motor ¼ HP - Single Phase 230 AC. | item17 | 12 | Nos |
19 | 1.18 | Frequency modulator and Demodulator trainer kit : In built Power Supply , all necessary components on board for FM MOD & DEMOD exercises, testing points, patch cords for interconnections etc. | item18 | 20 | Nos |
20 | 1.19 | PAM, PPM,PWM trainer kit : In built Power Supply , all necessary components on board for performing Modulation exercises, testing points, patch cords for interconnections etc. | item19 | 16 | Nos |
21 | 1.2 | AM/FM radio receiver : AM/FM radio receiver Trainer - AM / FM Radio Receiver Trainer Kit, inbuilt supply, with test points, fault simulation facility etc. | item20 | 15 | Nos |
22 | 1.21 | Microcontroller kits (8051) : Microcontroller kits (8051) along with programming software (Assembly level Programming) | item21 | 15 | Nos |
23 | 1.22 | Application kits for Microcontroller : Application kits for Microcontroller 8051 6 different applications kits set.\n1. Input Interface : 4x4 Matrix Keypad, ASCII Key PAD, Four Input Switch\n2. Display Module 16X2 LCD, Seven Segment, \nLED Bar Graph\n3. ADC/DAC Module with most\npopular DC/DAC0808\n4. PC Interface: RS232 & USB\n5. Motor Drive: DC, Servo, Stepper\n6. DAQ : Data Acquisition to sense different \nsensors signals | item22 | 27 | Nos |
24 | 1.23 | Sensor trainer kit : Sensor trainer kit containing Various sensors like Thermocouple, RTD, load cell, strain gauge, LVDT, smoke sensors, speed sensor etc. Inbuilt necessary power supply, testing points, patch cords for inter connections etc. | item23 | 16 | Nos |
25 | 1.24 | Fibre optic communication trainer : Full Duplex Analog & Digital, Trans-receiver with 660nm & 950nm or above, Noise Generator with variable gain, Four Seven Segment Display BER Counter, Eye Pattern etc. | item24 | 25 | Nos |
26 | 1.25 | Seven segment DPM : Seven segment DPM - Seven segment LED DPM 3 ½, 4 ½ digit for AC/ DC / Frequency measurement, temperature measurement. | item25 | 53 | Nos |
27 | 1.26 | LCD based DPM : LCD based DPM 3 ½, 4 ½ digit for AC/ DC/ frequency measurement etc. | item26 | 44 | Nos |
28 | 1.27 | SMPS of different make : SMPS for Computer Systems of Different Types for dual core, Intel i3 / i5 systems. | item27 | 32 | Nos |
29 | 1.28 | UPS trainer : 500VA , input 180V – 260V, sine wave output, Fault simulation facility, test points for checking wave shapes and voltages, diagrammatic explanation of circuit , battery included with at least 10 minute backup. | item28 | 33 | Nos |
30 | 1.29 | Precision set of screw driver : Precision set of screw drivers- T5, T6, T7 | item29 | 27 | Nos |
31 | 1.3 | Cell phone power source with charger chords for different cell phones : Cell phone power source with charger chords for different cell phones - 1 Amp/ 2 Amp, 5 V, micro USB, TYPE C, | item30 | 29 | Nos |
32 | 1.31 | LCD TV (Trainer kit ) : The Trainer kit should support PAL/NTSC video formats Complete block diagram of a LCD TV system, Study board indicating various sections of LCD TV along with the test points and fault simulation facility. | item31 | 22 | Nos |
33 | 1.32 | LCD TV (21”) : 21” HD Display, ( IR ) remote control,RCA, VGA, USB, HDMI connectivity | item32 | 14 | Nos |
34 | 1.33 | LED TV (Trainer kit ) : HD LED Colour DISPLAY, PAL/ NTSC video formats, complete block diagram of a LED TV system, Study board indicating various sections of LED TV along with the test points and switch faults Trouble shooting in different sections. | item33 | 16 | Nos |
35 | 1.34 | LED TV (32" ) : HD / FHD Display with ( IR )remote control RCA, VGA, USB, HDMI connectivity | item34 | 22 | Nos |
36 | 1.35 | Home theatre system : With 5.1 channel speaker system, Blue tooth enabled , inbuilt F.M. , USB, Memory card support | item35 | 13 | Nos |
37 | 1.36 | Solar Power Inverter Trainer : Solar Power Inverter Trainer 500VA , Simulator With built in meters for DCV, DCA, (for ACI, ACV, Power, Frequency), Protection Circuits, BS-10 terminals for making the connection, Single/ Dual axis tracking system Charge Controller : PWM based MPPT, Charging Stage : Bulk, Absorptions and Float. | item36 | 17 | Nos |
38 | 1.37 | LED lighting system : Led Lighting System, 6 V battery operated, 40 or more LED. | item37 | 23 | Nos |
39 | 1.38 | Microwave Oven Trainer : Capacity 25 / 28 Litre, Convection type. Fault simulation facility, test points, easy view, necessary block diagram explanation etc. | item38 | 15 | Nos |
40 | 1.39 | Washing Machine Trainer : Semi - Automatic Type, 6.5/7 Kg., Fault simulation facility, test points, easy view, necessary block diagram explanation etc. | item39 | 13 | Nos |
41 | 1.4 | Power Meter : Digital type power meter - Displays Voltage, Current, Power on a single large LCD Screen .Input - AC 80 - 260V/ 20 Amps | item40 | 2 | Nos |
42 | 1.41 | LCD/LED/TFT Monitors : LED ( Preferably ) with 4 K display | item41 | 4 | Nos |
43 | 1.42 | SMPS : SMPS for Computer Systems of Different Types for dual core, i3/i5 systems. Input Voltage: 170V to 260VAC. 50Hz, Output Voltage: 5V, -5V, 12V, -12V, Power good signal voltage/as required in computers. | item42 | 15 | Nos |
44 | 1.43 | Digital Multimeters : LCD Screen, 4.5 digit,DC Voltage, DC Current, AC Voltage, AC Current, Resistance measurement, Transistor testing facility, continuity testing with buzzer, Capacitance measurement, Frequency measurement Data Hold etc. | item43 | 6 | Nos |
45 | 1.44 | SMPS Trainer kit : Based on IC 494 as PWM, Input Voltage: 170V to 260VAC. 50Hz, Output Voltage: 5V, -5V, 12V, -12V, Power good signal voltage/as required in computers, Wattage (I/P): 150 Watt (approx.) With fault simulation facility, necessary testing points etc. | item44 | 15 | Nos |
46 | 1.45 | UPS Trainer kit : 500VA , input 180V – 260V, sine wave output, Fault simulation facility, test points for checking wave shapes and voltages, diagrammatic explanation of circuit , battery included with at least 10 minute backup. | item45 | 16 | Nos |
47 | 1.46 | Power electronics Trainer kit : On board comp. SCR,Triac ,Diac, Different types of Transistors (NPN, PNP, Power Transistor & UJT )\nResistive load of 100E/100W short circuit protection. In built power supply Reg. DC, Patch cards for connectivity\nContinuously variable 0 to 230V / 2A Variac.\nAt least 50 patch cords for making connections. | item46 | 10 | Nos |
48 | 1.47 | Post error debugging card : OCP Debug Card with LCD Spec v 1.0. | item47 | 7 | Nos |
49 | 1.48 | SMPS Tester : SMPS power supply tester Pc 20 24 pin PSU ATX SATA Hd | item48 | 9 | Nos |
50 | 1.49 | PCI slot Testing tool : Diagnostic card, 3 in 1 PCI-E LPC Diagnostic Debug Test Analyzer card for note book PC | item49 | 9 | Nos |
51 | 1.5 | Instrumentation amplifier trainer : In built necessary supply for performing mentioned experiments. All necessary components on board, testing points, patch cords for interconnections. | item50 | 2 | Nos |
52 | 1.51 | Kirchhoff’s Law, Resonance Trainer : Kirchhoff’s Law, Resonance Trainer In built necessary supply for performing mentioned experiments. All necessary components on board, testing points, patch cords for interconnections. | item51 | 2 | Nos |
53 | 1.52 | Electromagnetic Transformer : 10 KVA Servo Stabiliser, 70 - 250 V AC Input, Output 230 V + - 5%. Air cooled type | item52 | 2 | Nos |
54 | 1.53 | Logic Gates, Adder, Sub tractor, Flip Flop Etc. Trainer. \nNote for all above Digital IC Trainer : Digital IC Trainer - Built in power supply providing regulated DC for operation LEDs for observing output\nComponents On-board:\nNOT, AND, OR, NOR, NAND and XOR gates\n4 Bit Universal Shift Register\n4 Bit Adder/Sub tractor\nFlip Flops - RS, JK, Multiplexer, De multiplexer, Encoder, Decoder, Patch Cords for inter connections. | item53 | 2 | Nos |
55 | 1.54 | Register converter. ( Not required) Already mentioned in digital trainer | item54 | 2 | Nos |
56 | 1.55 | Power Supply ( Rectifiers Trainer ) : Power Supply half wave, full wave centre tap, and Bridge Rectifier Trainer - AC input 230V, Built in all necessary components, test points for measuring voltage/current and observing waveforms forms, inter connecting leads. | item55 | 2 | Nos |
57 | 1.56 | Rectifier bridge rectifier and Power supply regulated power supply Trainer : DC Regulated power supply Trainer Mains supply 230V ±10%, 50Hz, built in all necessary components, different test points for observation of voltage/current / waveforms | item56 | 2 | Nos |
58 | 1.57 | SCR driven/controlled power supply trainer. : SCR driven/controlled power supply trainer - Mains supply 230V ±10%, 50Hz, built in Voltmeter, Ammeter, and all necessary components, built-in, power supply and different test points for observation of voltage/current / waveforms | item57 | 2 | Nos |
59 | 1.58 | Discreet component trainer : Discreet component trainer - Built in power supply fixed and variable supply, on board components like transistors, Diodes,Resistors,capacitors,inductors,potentiometers,SCR,TRIACS etc., patch cords for inter connecting components etc. | item58 | 21 | Nos |
60 | 1.59 | Trainer on RS485 to RS232 converter : RS485 to RS232 converter Trainer | item59 | 2 | Nos |
61 | 1.6 | Training kits or trainers as available on microprocessors applicable to process control and instrumentation and accessories | item60 | 2 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail