Provision Of 02Xtech Store For Rocket At Janglot Under Ge Basoli
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Jan 2021
0 days left
EMD
28900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
area of GE Basoli → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of 02Xtech Store For Rocket At Janglot Under Ge Basoli
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Jan-2021 | revised boq | BOQ | 09-Jan-2021 |
BOQ
| Name of Work: : Provn of 02xTech Store at Janglot Ground under GE basoli | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavating in trenches in any type of soil, n exc 1.5m wide and n exc 1.5m in depth getting out in any type of soil complete all as specified and directed... | 88 | Cum | |
| 2 | 2 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.. | 260.6 | Sqm | |
| 3 | 3 | Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified and directed. | 45 | Cum | |
| 4 | 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft / loose soil. complete all as specified and directed. | 43 | Cum | |
| 5 | 5 | Material and labour for cement concrete 1:4:8 type D-2(using 40mm graded stone aggregate)( as in foundation, filling and mass concrete, all as specified and directed. | 8 | Cum | |
| 6 | 6 | Material and labour for Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6, including demolition of brick work or stone/boulder masonry built in cement mortar complete all as specified and directed. | 46.64 | Cum | |
| 7 | 7 | M&L for rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. | 260 | Sqm | |
| 8 | 8 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surface even and smooth without using extra cement complete all as specified and directed. | 190 | Sqm | |
| 9 | 9 | Material and labour for rendering 10 mm thick in cement mortar 1:3 and finished even and smooth without using extra cement and preparation of new plastered surfaces and applying three coats of white wash on ceiling including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. | 161 | Sqm | |
| 10 | 10 | M&L for M-25 Design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete (using 20 mm graded crushed stone aggregate) complete all as specified and directed . | 18 | Cum | |
| 11 | 11 | M&L for M-25 Design mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and stair case slab, in shelves, parapets, railing and like(using 20 mm graded crushed stone aggregate) complete all as specified and directed . | 30.48 | Cum | |
| 12 | 12 | M&L for M-25 Design mix as in Columns, pillars, piers, posts and struts (using 20 mm graded crushed stone aggregate) complete all as specified and directed . | 9.61 | Cum | |
| 13 | 13 | M&L for reinforced cement concrete M-25 Design mix using 20mm graded crushed aggregate as in beam,chajja,cantiliver,bressummers,lintel over 1.5 mtr span complete all as specified and directed . | 1.5 | Cum | |
| 14 | 14 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and sofits of foundation and plinth beams; and similar works; vertical or to batter for rough finished flat surfaces complete all as specified and directed. | 95 | Sqm | |
| 15 | 15 | Form work to edges of concrete flats, breaks in floors, openings in concrete walls,floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 20 cm wide for rough finished flat surfaces of concrete complete all as specified and directed. | 20 | Sqm | |
| 16 | 16 | Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed. | 100 | Sqm | |
| 17 | 17 | Form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exceeding 200mm thick complete all as specified and directed. | 195 | Sqm | |
| 18 | 18 | TMT Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed .\n | 5000 | Kg | |
| 19 | 19 | All as per item No 18 above but 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders | 1112 | Kg | |
| 20 | 20 | M&L for plain cement concrete 75mm thick 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub floor, sub base complete, all as specified and directed . | 120 | Sqm | |
| 21 | 21 | Material and labour for Machine cut kota stone slab fooring 18-20mm thick over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 for laying kota stone slab and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to obtain mirror finish complete all as specified and directed by Engineer-in-Charge\n | 140 | Sqm | |
| 22 | 22 | Material and labour for Steel window factory made out of box type frame and shutter (double shutter one for glazing another for flyproofing) made out of section using flash butt welding hinges shall be provided to both shutter complete including all fitting as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 complete all as specified and directed. | 6 | Sqm | |
| 23 | 23 | Supply and fix for Sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed. | 5 | Sqm | |
| 24 | 24 | Supply and fixing for Mild steel galvanised wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.\n | 9 | Sqm | |
| 25 | 25 | Supply and fix for 1.25mm thick pressed steel frames for doors of size 125 x 60 mm, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , including one shop coat of red oxide, zinc chrome primer complete all as specified and directed | 15.24 | RM | |
| 26 | 26 | Material and labour for providing cement concrete type C-1 1:3:6 using 20mm graded stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified. | 0.11 | Cum | |
| 27 | 27 | Supply and fixing for 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified and directed. | 6 | Sqm | |
| 28 | 28 | M&L for Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with shash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a). complete all as specified and directed. | 6 | Sqm | |
| 29 | 29 | Supply and fix for mild steel barrel tower bolts stove enmelled black with bright bolt of size 150mm complete all as specified and directed. | 12 | Each | |
| 30 | 30 | S&F Mild steel pressed handles,oval type, stove emameled black of size 125mm.complete all as specified and directed.. | 12 | Each | |
| 31 | 31 | Supply and fix for 300 mm ordinary rat tail rod pattern spring incl roller and roller plate (mild steel complete all as specified and directed. | 3 | Each | |
| 32 | 32 | S&F Mild steel sliding door bolts of size 250mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section. complete all as specified and directed.. | 3 | Each | |
| 33 | 33 | M&L spreading and levelling in layers nexc 25cm thick Watering well ramming under floor, complete all as specified and directed. | 36 | Sqm | |
| 34 | 34 | M&L hardcore of broken stone or boulders. gauge n.exc 63mm, deposited spread and leveled in layers n.exc 15cm thick. Watered hand rammed to a true surface, complete all as specified and directed. | 10 | Cum | |
| 35 | 35 | M&L for Plain cement concrete 75mm thick 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub floor, sub base complete, all as specified and directed . | 55 | Sqm | |
| 36 | 36 | Material and labour for preparation of new plastered surface of wall/facia chajja and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed. | 190 | Sqm | |
| 37 | 37 | M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint.over a coat of red oxide primer complete all as specified and directed. | 20 | Sqm | |
| 38 | 38 | Material and labour for preparation of new plastered surfaces and applying one coat primer and two coats of distemper oil emulsion over and including 3mm thick wall putty etc complete all as specified and directed by Engineer-in-Charge. \n | 220 | Sqm | |
| 39 | 39 | M&L for applying three coats of white washing on walls including preparation of newly plastered surfaces complete all as specified and directed. | 161 | Sqm | |
| 40 | 40 | Material and labour for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 22 | Sqm | |
| 41 | 41 | M&L for roof treatment with the following specification - (a)20mm thick rendering in CM 1:4 with WPC @3% by weight of cement (b) applying evenly one coat of blown hot bitumen of grade 85/25 @ 1.2 kg per sqm on primed surfaces. (e) Applying a layer of APP based polymeric membrane 3mm thick (minimum) weighting 3.5 kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm top of membrane with granular finish. The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application . complete all as specified and directed. | 160 | Sqm | |
| 42 | 42 | Material and labour Anti termite treatment to backfilling in contact with foundation at the rate of 7.50 ltr of emulsion per sqm on vertical surface complete all as specified and directed. | 81 | Sqm | |
| 43 | 43 | Material and labour Anti termite treatment to the top surface filled earth at the rate of 5 Ltr per sqm on surface complete all as specified and directed. | 105 | Sqm | |
| 44 | 44 | Material and labour Anti termite treatment to the under plinth at the rate of 5 Ltr per sqm suface complete all as specified and directed. | 50 | Sqm | |
| 45 | 45 | Material and labour for Point wiring with 1.5 Sqmm (nominal area)copper conductor FRLS cable (Multi stranded) PVC insulated and unsheathed in existing concealed conduit and sunk cast iron/pressed steel terminal boxes duly painted with a coat of red oxide primer and replacement of 3mm thick plastic laminated sheet of adequate size for light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed with colour code earth wire connected to common earth dolly complete all as specified.\n\n | 10 | Per point | |
| 46 | 46 | All as per item No 45 but for one 3 pin 5 Amp socket outlet on independent board complete all as specified and directed. | 1 | Per point | |
| 47 | 47 | All as per item No 45 but for one 3 pin 5 Amp socket outlet on same board complete all as specified and directed. | 1 | Per point | |
| 48 | 48 | Material and labour for Point wiring with 2.5 Sqmm copper conductor FRLS cable (Multi stranded ) PVC insulated and unsheathed cable conductor in existing concealed conduit and sunk cast iron/pressed steel terminal boxes duly painted with a coat of red oxide primer and replacement of 3mm thick plastic laminated sheet of adequate size for one 3 pin socket outlet 15 amps on independent board incl continuous 1.5 sqmm copper conductor FRLS (multistranded) PVC insulated and unsheathed cable earth wire connected to common earth dolly complete all as specified.\n | 6 | Per point | |
| 49 | 49 | Supply and fix for Switch piano, flush type single pole, one way 5 Amp, complete all as specified and directed. | 12 | Each | |
| 50 | 50 | Supply and fix for Socket outlet 2 in 1, 3 pin, 5A complete all as specified and directed. | 1 | Each | |
| 51 | 51 | Supply and fix for Socket outlet 3 pin, 15 Amp flush type multipurpose complete all as specified and directed. | 1 | Each | |
| 52 | 52 | Supply and fix for Switch piano, flush type single pole, one way 15 Amp, complete all as specified and directed. | 1 | Each | |
| 53 | 53 | Supply and fix for ceiling rose surface bakelite 65x50mm, two to three terminal isolated body fixed on PVC round block complete all as specified and directed. | 6 | Each | |
| 54 | 54 | Supply and fix in replacement sheet metal powder coated vertical DB double door single pole and neutral (SPN) distribution board for MCB provision 230 Volt , 50 Hz AC supply 4 way fitted with copper bus bar rated 200 amps neutral link, earth bar and din rail for fixing the MCB,s complete all as specified and directed. | 1 | Each | |
| 55 | 55 | Supply and fix in repair for MCB SPN 40 Amps with 10 KA breaking capacity of 'C' series in distribution board complete all as specified and directed. | 1 | Each | |
| 56 | 56 | Supply and fix in repair for MCB SP 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution board complete all as specified and directed. | 6 | Each | |
| 57 | 57 | Supply and fix in replacement LED tube light fitting madeout of CRCA sheet 1 x 20 watt, 230v including LED tube rod,LED Driver,bipin holder 4 feet long complete with industrial box type fitting accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable 0.5 Sqm complete all as specified and directed. | 6 | Each | |
| 58 | 58 | Supply and Fix in replacement LED bulhead fitting luminaries with opal diffuser including LED lamp type 10W LED 6000K lampholder etc complete all as specified and directed. | 2 | Each | |
| 59 | 59 | Material and labour Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level. connecting to the Galvanised iron earth wire 4.0mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agregates with 40mm thick cover of RCC (1:2:4) reinforeed with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 40x40x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering , perforated at bottom 1.75 metre long placed on top edge of earth plate. charcoal and common salt filled 150 mm thick all around the earth plate test point made out of 40x8mm FI galvanised with fixing arrangement, funnel wire mesh and earth work in any type of soil returing filling in and removal of surplus soil to a distance not exceeding 50 mtr all as per electical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. | 1 | Each | |
| 60 | 60 | Repair and maintenance of unserviceable ceiling fan of 1200mm/1400mm sweep at contractor's work shop, incl dismantling complete the ceiling fan parts, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, bracket, rubber bush, connecting wire, PVC connector, aluminium clamp for rod, bracket, bush rod, blade and greasing/oiling etc assembling, cleaning and testing of ceiling fan and hanging the same after repair including taking down ceiling fan of any make and sweep. \n Note: (i) Unserviceable parts as above shall be measured and paid separately under relevant items of BOQ' as supply only.(ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'.(iii) Writing of MES Nos and painting of ceiling fan shall be measured & paid separately uner relevant item of Sch 'A'.(iv) A register will be maintained by the contractor for record of repair duly signed by JE and Engr-in-Charge & contractor.(v) Cost of minor part i.e. Cotterr pin, screws shall be deemed to included in the cost of quoted rate. | 2 | Each | |
| 61 | 61 | Supply , laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty 1100 Volts grade with stranded aluminium conductor,cross section area 10 sq mm 2 core complete all as specified and directed. | 75 | RM | |
| 62 | 62 | Supply and fix for DWC high densiy polyethylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laidalong pole/along wall/in PCC on GL/roof and including all fittings as required at site including taking down the old unserviceable pipe complete all as specified and directed. | 55 | RM |
AI Tender Summary
Tender Timeline
Jan 03, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 09, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 09, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 11, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender