Supply Of Material

Sharing tender

Supply Of Material-1 Providing and fixing Double / Single Bed with side table for Bedroom made of CTW support and 18 mm thick plywood & Formica on one side and one side finishing with french polish without grooves, externally with necessary lipping (BTC) , moulding, antitermite treatment to plywood and woodwork etc. complete. 2 Sleep well/ kurlon or equivalent bed Matteress 3 Bed Sheet bombay dyeing single bed 4 Pillows with cover 5 Providing and fixing Decorative Dressing table with superior quality of glass with storage arragement etc. complete 6 Providing and supplying Teapoy (BTC)Teak wood frame with high finished melamine polish and design with Tempered glass decorative Top.a) Big Size 7 Providing and fixing cupboard 50 to 60 cm. deep Full height storage by using 18 mm thick plywood of requisite manufacture viz. anchor, century, kenwood, duro or equivalent generally conforminig to I.S. 303/I.S.710-1980 for frame, internal verticals, horizontal divisions , openable, shutter to back and shall be finished with Sunmica ( Formica ) sheet on top, front, back ,insides and sides with grooves externally CCTW bedding and lipping as and where required with all material such as tower bolt, hinges, handle, lock as per detailed drawing including two coat of french polish with antitermite treatment & melamine polish externally etc. in cluding all leads and lifts etc. complete as per architect drawing and instructions of executive in Charge. 8 Supplying Superior quality full cushions sofa set of full size made of Burma Teak wood frame work with helical spring and imported superior quality of high density foam having skirting of 75 mm high finished melamine polish and using approved imported superior quality of leather fabric and approved design etc. complete a) 3 Seater 9 b)Two Seater 10 b) Single Seater 11 Providing and supplying office chairs with powder coated heavy angular frame with superior quality of high density moulded foam with superior quality of uphastry fabric of approved design etc. complete 12 Providing and supplying high back revolving chairs with tilting arrangement & adjustable height the chair shall be approved quality V foam & uphastry stiched synthetic fabric and lipped with PVC beading chair shall be provided with approved quality castars & 30 cm long powder coated arms for five legged stand the complete including standard company etc. complete. 13 Providing and supplying Decorative Glass Top Dinning table with Heavy duty decorative stainless steel Base with 6 no. of decorative dinning chair 14 Providing and supplying office table with side table cum storage made out of BTC frame work with decorative BTC moulding 19 mm thick ply with matching teak veneer / Formica on top including provided decorative base for table top and melamine polish etc. complete 15 Providing and supplying Conference table made out of BTC frame work and 35 mm Plywood for Top and 18 mm thick ply for base and support with decorative BTC moulding with Decorative teak veneer / Formica on top including provided decorative base for table top and melamine polish etc. complete 16 Providing and supplying office chairs with powder coated heavy angular frame with superior quality of high density moulded foam with superior quality of uphastry fabric of approved design etc. complete 17 Providing and fixing Low height Partitions at required location having height Upto 1.50 M & minimum 57 mm thick made by using 70 x 30 mm CPTW section framing at 400 mm centre to centre covered with 12 mm thick plywood on both sides. The partitons shall be finished with 1.5 mm sunmica matt/ suede / fine line finished lamination pattern with or without with or without grooves, externally with necessary lipping (BTC) , moulding, antitermite treatment to plywood and woodwork etc. complete. 18 Providing and fixing in position Computer Table having overall size 112x 61 x 78 Centim eter made out of 18 mm thick plywood of the requisite manufacturer viz.Anchor / Century / Kenwood / Duro or equivalent generally conforming to IS 303 / IS 710 -1980 for sidess and apron having front and horizontal patta two drawers made out of 18 mm Commercial ply sides & 6 mm Marine ply of equisite manufacturer viz.Anchor / Century / Kenwood / Duro or equivalent generally conforming to IS 303 / IS 710 -1980 bottom with sliding arrangement with two open shelves 18 mm thick marine ply with necessary lipping beading & CTW footrest out of 75 x 40 mm ( finished side) section the table shall be finished with 1.5 mm thick laminate matt/ suede/ fine line finished lamination pattern with or without grooves, externally with necessary liping, moulding , two coats of french polish with antitermite treatmnet to plywood and wood work and melamine polish extrnally etc. includijng all leads and lifts etc. complete as per Architects drawing and instructions of Engineer Incharge. 19 Providing and fixing full height wall pannelling at required location having height upto 3.50 M & minimum 44 mm thick made by using 50 x 30 mm CPTW section framing at 400 mm centre to centre covered with 12 mm thick plywood & Formica Lamination on one side only with or without grooves, externally with necessary lipping (BTC) , moulding, antitermite treatment to plywood and woodwork etc. complete. 20 Wooden flooring for VIP suit 21 Providing and Fixing Sun Louvre panels roll formed, 0.6mm thick, pre-painted stove enameled aluminium strip of a corrosion resistant alloy, including necessary fitting etc. complete, as directed by Engineer in Charge.