| 1 | 1 | Measuring tools | | | |
|---|
| 2 | 1.01 | Vernier Caliper Digital | | 1 | 0-200 mm |
|---|
| 3 | 1.02 | External Micrometer (digital)Range | | 1 | 0-25 mm |
|---|
| 4 | 1.03 | External Micrometer Range(Manual) | | 1 | 25-50 mm |
|---|
| 5 | 1.04 | Internal Micrometer Range(Digital) | | 1 | 25-50 mm |
|---|
| 6 | 1.05 | Dial Gauge (Metric System)with magnetic stand plunger type | | 1 | 0.01 mm ( Least Count) |
|---|
| 7 | 1.06 | Telescopic Gauge set of 6 | | 1 | 0.313-6\" |
|---|
| 8 | 1.07 | Bore Gauge | | 1 | 50-150 mm |
|---|
| 9 | 1.08 | Feeler Gauge Metric | | 1 | 25 blade |
|---|
| 10 | 1.09 | Straight Edge | | 1 | 400 mm |
|---|
| 11 | 1.1 | Divider | | 2 | 200 mm |
|---|
| 12 | 1.11 | Inside Caliper | | 2 | 200 mm |
|---|
| 13 | 1.12 | Outside Caliper | | 2 | 200 mm |
|---|
| 14 | 1.13 | Torque wrench set of 3 | | 1 | 5-225 N-m |
|---|
| 15 | 1.14 | Digital Multi Meter | | 2 | 0 to 1000 Ohms, 2.5\nto 500 V |
|---|
| 16 | 1.15 | Hydrometer | | 2 | , |
|---|
| 17 | 1.16 | Depth Gauge Range | | 1 | 0-50 mm |
|---|
| 18 | 1.17 | Bevel Gauge | | 1 | 12\" Blade, 5 minute Vernier Resolution |
|---|
| 19 | 1.18 | Battery Charger | | 1 | 6 Amp 12 Volt |
|---|
| 20 | 1.19 | Tyre pressure Gauge (Hand Held, Digital) | | 1 | 0-120 PSI |
|---|
| 21 | 1.2 | Hydrolic Jack (Trolley Type) | | 1 | 2 ton |
|---|
| 22 | 1.21 | Maintanance Tools Fasteners :- | | | |
|---|
| 23 | 1.22 | Bolts Gr 8, Gr 5, Gr 2 | | 10 | 8, 10, 12, 14, 17 mm |
|---|
| 24 | 1.23 | Nuts | | 20 | Hex Nut , Castle Nut\n, Wing Nut , Locking Nut , Lug Nut , Speed Nut (Suitable size) |
|---|
| 25 | 1.24 | Studs | | 10 | , |
|---|
| 26 | 1.25 | Screws | | 20 | Machine Screws, Sheet Metal Screws(self tapping), Set Screw – (allen wrench/no head) |
|---|
| 27 | 1.26 | Washers | | 20 | Flat Washer, Lock Washer (Suitable size) |
|---|
| 28 | 1.27 | Roll-pins/Spring-pins | | 10 | , |
|---|
| 29 | 1.28 | C - Clips | | 10 | Internal & External 10 each |
|---|
| 30 | 2 | General Purpose Tools | | | |
|---|
| 31 | 2.01 | Double Ended Spanner set | | 3 | 6x7mm,8x9mm,10x11mm,12x13mm,14x15mm,16x17mm,18x19mm,20x21mm |
|---|
| 32 | 2.02 | Ring Spanner Set | | 3 | 6x7mm,8x9mm,10x11mm,12x13mm,14x15mm,16x17mm,18x19mm,20x22mm |
|---|
| 33 | 3 | Maintanance Tools Fasteners :- | | | |
|---|
| 34 | 3.01 | Socket Spanner set with | | 1 | Nos |
|---|
| 35 | 3.02 | 20 sockets | | 2 | 10 mm onwards |
|---|
| 36 | 3.03 | T- Handle | | 2 | 12\" |
|---|
| 37 | 3.04 | Extension Rod | | 2 | 4\" |
|---|
| 38 | 3.05 | Extension Rod | | 2 | 8\" |
|---|
| 39 | 3.06 | Ratchet Handle | | 2 | 12\" |
|---|
| 40 | 3.07 | Rotating Union | | 2 | Universal Joint |
|---|
| 41 | 3.08 | Side Cutting Plier | | 2 | 200 mm |
|---|
| 42 | 3.09 | Round Nose Plier | | 2 | 200 mm |
|---|
| 43 | 3.1 | Flat Nose Plier | | 2 | 200 mm |
|---|
| 44 | 3.11 | Ball Peen Hammer with Handle | | 2 | 500 grams |
|---|
| 45 | 3.12 | Cross Peen Hammer with Handle | | 2 | 200 grams |
|---|
| 46 | 3.13 | Screw Driver | | 4 | Straight tip 8\" Long |
|---|
| 47 | 3.14 | Screw Driver | | 4 | Straight tip 12\" Long |
|---|
| 48 | 3.15 | Phillips Screw Driver | | 4 | 8\" Long |
|---|
| 49 | 3.16 | Phillips Screw Driver | | 4 | 12\" Long |
|---|
| 50 | 3.17 | Hacksaw Frame fixed | | 4 | 300 mm |
|---|
| 51 | 3.18 | Hacksaw blades | | 50 | For above Hacksaw Frame |
|---|
| 52 | 3.19 | Cold Chisel Flat | | 4 | 10 mm |
|---|
| 53 | 3.2 | Allen Key set | | 2 | 4 mm - 14mm |
|---|
| 54 | 3.21 | Oil Cane | | 2 | 500 ml |
|---|
| 55 | 3.22 | File flat bastard | | 2 | 300 mm |
|---|
| 56 | 3.23 | File Square Rough | | 2 | 300 mm |
|---|
| 57 | 3.24 | File flat smooth 2nd cut | | 2 | 250 mm |
|---|
| 58 | 3.25 | File Rasp Cut | | 1 | 300 mm |
|---|
| 59 | 3.26 | Emery Paper/Cloth | | 5 | 80 grit/ 120 grit/\n150 grit |
|---|
| 60 | 3.27 | Chassie Frame (LMV) (Old)Diesel | | 1 | With cross members. Mounted with engine, clutch, gear box, Rear axle, Front Axle, Propeller shaft and steering gear box with wheels, Motorized |
|---|
| 61 | 3.28 | Cut model of any engine (MPFI) Old, Motorized | | 1 | 4 cylinders, 1.2 L Cap, Power Approx. 80 kW, with electronic fuel pump, impeller type water pump, catridge type filters, Alternator, self Starter Compressor Thermostat |
|---|
| 62 | 3.29 | Live Axle Assly with Differential & Final Drive\n/ Cut model of same,\nmounted on stand | | 1 | Differential( bevel geared, trunion, tail pinion, crown wheel) splined axle shaft, hub assly, opposed type taper roller bearing) |
|---|
| 63 | 3.3 | Dead Axle Assly with Stub Axle mounted on stand | | 1 | For light Motor Vehicle |
|---|
| 64 | 3.31 | Components of Suspension system | | 1 | Leaf spring Front & Rear,Centre bolt, Shackle bracket, Hanger bracket, U clamp, Shackle Pin |
|---|
| 65 | 3.32 | Cut model of Shock Absorber | | 1 | Telescopic Type |
|---|
| 66 | 3.33 | Components of steering System (at least each one) Mounted on stand | | 1 | Tie Rod, Rack & Pinion assembly, Complete all standard components. |
|---|
| 67 | 3.34 | Air Brake System with compressor | | 1 | Working model with all standard components |
|---|
| 68 | 3.35 | Mechanical brake assembly | | 1 | Pedal, Linkage, Cam & Brake shoe, mounted on a board |
|---|
| 69 | 3.36 | Hydraulic brake assembly | | 1 | Master cylinder, Servo(Vaccum/Press ure), Wheel cylinder, Pipe lines, mounted on a board |
|---|
| 70 | 3.37 | Components of Automobile Electrical System (at least each one) Mounted on a board. | | 1 | Ignition sys,\nAlternator, Self Starter, lighting sys, Head Light, Rear Lights, Stop lights, Wiper motor, Horn with suitable battery standard make |
|---|
| 71 | 3.38 | Different coloured automobile cables | | 1 | Brown, Yellow, White, Green, Blue, Black 2.5 sq mm |
|---|
| 72 | 3.39 | Cooling System Components (Mounted on a board) | | 1 | Radiator, Water pump, Cooling Fan, V – belt, Thermostat valve and Hoses. |
|---|
| 73 | 3.4 | Lubrication System Components | | 1 | Strainer, Oil pump, PRV, etc. mounted on a board. |
|---|
| 74 | 3.41 | Compressor (in working condition) | | 1 | Single acting Reciprocating type, Cap 160 ltr |
|---|
| 75 | 3.42 | Gearbox (old) and clutch assembly. Cut Section | | 1 | Synchromesh, 5 speed |
|---|
| 76 | 3.43 | Fuse | | 4 | 5A, 10A, 15A, 20A |
|---|
| 77 | 3.44 | Projector with screen | | 1 | Standard make with USB port |
|---|
| 78 | 3.45 | Working Bench | | 1 | 2.5 X 1.20 X 0.65\nmeters |
|---|
| 79 | 3.46 | Bench Vice | | 2 | 125 mm Jaw |
|---|
| 80 | 3.47 | Table for Instructor | | 1 | 4 ft. * 2.5 ft. |
|---|
| 81 | 3.48 | Chair For Instructor | | 2 | Standard make |
|---|
| 82 | 3.49 | Almirah Steel | | 1 | 2.5x1.20x0.5 meter |
|---|
| 83 | 3.5 | Hand Grinder 5 | | 1 | 5000 RPM |
|---|
| 84 | 3.51 | Greace Gun | | 1 | Small |
|---|
| 85 | 3.52 | Mallet Hammer | | 1 | 500 grams |
|---|
| 86 | 3.53 | Screw gauge | | 1 | , |
|---|
| 87 | 3.54 | Center Punch | | 1 | , |
|---|
| 88 | 3.55 | Automotive Puncture Repair kit | | 2 | For Tubeless and Tubed Tyre |
|---|
| 89 | 3.56 | Alignment Gauge (Manual) | | 1 | For Toe in/Toe out |
|---|
| 90 | 3.57 | First Aid Kit | | 1 | With general first aide things |
|---|
| 91 | 3.58 | Fire Extinguisher | | 1 | ABC type |
|---|
