Intenance And Re-Organization Of Outgoing Feeders , Shed And Making Of Foundation , Filling Of Gravels And Installation Of Goab Etc At Main Substation 11Kv /3 . 3Kv Of Karma Project Under Kuju Area .
Tender Value
8.48 Lakhs
Estimated cost
Bid Submission
28 Dec 2020
0 days left
EMD
10700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kuju → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Intenance And Re-Organization Of Outgoing Feeders , Shed And Making Of Foundation , Filling Of Gravels And Installation Of Goab Etc At Main Substation 11Kv / 3 . 3Kv Of Karma Project Under Kuju Area .
BOQ
| Name of the Work / Contract No: | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Graveling works | |||
| 2 | 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m inwidth as well as 10 sqm on plan) including disposal of excavatedearth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelledand neatly dressed.2.7.1 Ordinary rock | 72 | cum | |
| 3 | 3 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in requiredthickness, for all leads & lifts, all complete as per direction of Engineer-incharge. | 45 | cum | |
| 4 | 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete | 45 | cum | |
| 5 | 5 | Safety Devices in 11KV Feeder | |||
| 6 | 6 | Supply and fixing of GOAB 630Amp 11KV grade | 1 | nos | |
| 7 | 7 | Limit switch | 1 | nos | |
| 8 | 8 | Cable 2.5sq mm x 2 core copper | 50 | mtr | |
| 9 | 9 | Pad Connector | 6 | Nos | |
| 10 | 10 | Auxilary Contractor | 1 | nos | |
| 11 | 11 | Erection cost 7 to 10 | 1 | nos | |
| 12 | 12 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 0.2 | MT | |
| 13 | 13 | D\" Iron Clamp | 3 | Nos | |
| 14 | 14 | Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm(7.14 kg per metre) double pole cross arm for three wire 11KVover head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded onone side to the channel iron and with bolts and nuts on the otherside for tying the cross arms together, including drilling holes forinsulator pins/ fittings, bolts, nuts and washers etc (as per drawing)and painting with primer and finish paint as required. | 1 | nos | |
| 15 | 15 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing structure as required. Upto 120 sq. mm | 50 | mtr | |
| 16 | 16 | Straight through heat shrinkable cable jointing kit with ferrules for 11 KV grade XLPE cable for 3 core 70 sq. mm | 1 | set | |
| 17 | 17 | Supplying and making pole mounting cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 sq. mm | 2 | nos | |
| 18 | 18 | Orinetation of main substation | |||
| 19 | 19 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) | 3.254 | cum | |
| 20 | 20 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick | 21 | sqm | |
| 21 | 21 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | 5.745 | cum | |
| 22 | 22 | Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | 1.44 | cum | |
| 23 | 23 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m inwidth as well as 10 sqm on plan) including disposal of excavatedearth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelledand neatly dressed.2.7.1 Ordinary rock | 6 | cum | |
| 24 | 24 | Shed Renovation | |||
| 25 | 25 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) | 3.12 | cum | |
| 26 | 26 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick | 30 | sqm | |
| 27 | 27 | Providing corrugated G.S. sheet roofing including vertical / curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8 mm diameterwith bitumen and G.I. limpet washers or with G.I. limpet washers filledwith white lead, including a coat of approved steel primer and two coatsof approved paint on overlapping of sheets complete (up to any pitch inhorizontal/ vertical or curved surfaces), excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required.0.80 mm thick with zinc coating not less than 275 gm/m² | 24 | sqm | |
| 28 | 28 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 0.5 | MT | |
| 29 | 29 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. | 15 | mtr | |
| 30 | 30 | Busbar support | |||
| 31 | 31 | Busbar Support Connctor | 3 | Nos | |
| 32 | 32 | Post Insulator | 6 | Nos. | |
| 33 | 33 | Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | 0.37 | cum | |
| 34 | 34 | Erection cost 31 & 32 | 1 | Nos. | |
| 35 | 35 | Re-Organization of OH line outgoing feeder | |||
| 36 | 36 | Erection of pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required.Above 10.00 metre and upto 12.00 metre | 4 | nos | |
| 37 | 37 | Supplying and erection of 11 KV pin insulator complete with largesteel head G.I. pin, nuts, washers etc. as required. | 6 | nos | |
| 38 | 38 | Supplying and erection of 11 KV disc insulator for 11 KV overhead lines with galvanised insulator fittings, ball and socket typeand complete with galvanised strain clamps, bolts, nuts, washers etc. as required. | 6 | nos | |
| 39 | 39 | Supply of G.I. wire | 25 | kg | |
| 40 | 40 | Erection of G.I. Wire No. 8 SWG including binding etc. as required | 25 | kg | |
| 41 | 41 | Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter andabove including binding etc. as required. | 95 | kg | |
| 42 | 42 | Supplying and erection of a set of cross bracing FRLSame workfor 11 KV over head line double pole structure having four membersfabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height ,complete with 50 mm X 6mm M.S. flat iron clamps, bolts andnuts including drilling holes for insulator pins, bolts and nuts etc(as per drawing) and painting with primer and finish paint as required. | 3 | nos | |
| 43 | 43 | Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm(7.14 kg per metre) double pole cross arm for three wire 11KVover head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded onone side to the channel iron and with bolts and nuts on the otherside for tying the cross arms together, including drilling holes forinsulator pins/ fittings, bolts, nuts and washers etc (as per drawing)and painting with primer and finish paint as required. | 5 | nos | |
| 44 | 44 | Supplying and erection of galvanised ‘D’ iron clamps completewith shackle insulator (100 mm X 110 mm), G.I. bolts, nuts andwashers, coach screws etc. as required. | 12 | nos | |
| 45 | 45 | Supply and fixing of GOAB 630Amp 11KV grade | 1 | cum | |
| 46 | 46 | Oil Soal Tank Soak Pit | |||
| 47 | 47 | Earth work in excavation by mechanical means (Hydraulic excavator/ manual means over areas (exceeding 30 cm in depth, 1.5 m inwidth as well as 10 sqm on plan) including disposal of excavatedearth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelledand neatly dressed.2.7.1 Ordinary rock | 44 | cum | |
| 48 | 48 | Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | 3 | cum | |
| 49 | 49 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.80 mm dia nominal bore | 26 | mtr | |
| 50 | 50 | Reinforced cement concrete work in walls (any thickness), includingattached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate20 mm nominal size) | 0.9 | cum | |
| 51 | 51 | Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete above plinth level.Mild steel and Medium Tensile steel bars | 75.6 | kg | |
| 52 | 52 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) | 4.34 | cum | |
| 53 | 53 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick | 26 | sqm | |
| 54 | 54 | Centering and shuttering including strutting, propping etc. and emoval ofform work for :Retaining walls, return walls, walls (any thickness) includingattached pilasters, buttresses, plinth and string courses fillets,kerbs and steps etc. | 6 | sqm | |
| 55 | 55 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | 4.98 | cum | |
| 56 | 56 | Cost of Flange 80 mm | 6 | nos | |
| 57 | 57 | Cost of Valve 80mm | 1 | Nos | |
| 58 | 58 | Erection cost sl no-56 &57 | 1 | nos | |
| 59 | 59 | Remote Control | |||
| 60 | 60 | Fuse base barrier | 2 | nos | |
| 61 | 61 | Volt Meter | 2 | nos | |
| 62 | 62 | Indicating lamp with holder | 2 | nos | |
| 63 | 63 | Wiring with ferrul & lugs | 1 | nos | |
| 64 | 64 | Making of box with GI sheet | 1 | nos | |
| 65 | 65 | Limit Switch | 1 | nos | |
| 66 | 66 | TNC switch | 1 | nos | |
| 67 | 67 | Hooter Horizental Or Vertical | 1 | nos | |
| 68 | 68 | Cost of control cable 2.5sq mm 1.1Kv grade X 6 Core Armoured Copper | 120 | mtr | |
| 69 | 69 | Auxilary contractor | 1 | nos | |
| 70 | 70 | Painting & Nut & Bolts as required | 1 | job | |
| 71 | 72 | labour charge except sl no 63,64 | 1 | nos | |
| 72 | 73 | Profit | 1 | nos | |
| 73 | 74 | Earthpits works | |||
| 74 | 75 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required | 4 | set | |
| 75 | 76 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre belowground as strip earth electrode, including connection/ terminatingwith G.I. nut, bolt, spring, washer etc. as required. (Jointing shallbe done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) | 190 | mtr | |
| 76 | 77 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.\n | 90 | mtr | |
| 77 | 78 | Total impact of GST for the purpose of CTC | 1 | Nos |
AI Tender Summary
Tender Timeline
Dec 19, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedDec 28, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 29, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender