Construction Of Three Storied Market Complex At Mini Market Kashi Market Circus Maidan Ward 18 Katwa Municipality Within Purba Bardhaman District
Tender Value
1.76 Crore
Estimated cost
Bid Submission
22 Jan 2021
0 days left
EMD
3.52 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Katwa → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Three Storied Market Complex At Mini Market Kashi Market Circus Maidan Ward 18 Katwa Municipality Within Purba Bardhaman District
BOQ
| Name of Work: Construction of three storied Market Complex at Mini Market (Kashi Market), Circus Maidan, Ward 18 Katwa Municipality within Purba Bardhaman District | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling all types of masonry excepting cement\nconcrete plain or reinforced, stacking serviceable\nmaterials at site and removing rubbish as directed\nwithin a lead of 75 m.\na) In ground floor including roof. | Item no-1 | 741 | Cum |
| 2 | 2 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. \n(a) Depth of excavation not exceeding 1,500 mm. | Item no-2 | 464.982 | Cu.m |
| 3 | 3 | (b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. | Item no-3 | 32.738 | Cu.m |
| 4 | 4 | Earthwork in filling in foundation trenches with good earth in layers not exceeding 150mm in thickness including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) | Item no-4 | ||
| 5 | 5 | a) With earth obtained from excavation of foundation. | Item no-5 | 233.673 | Cu.m |
| 6 | 6 | Filling in foundation or plinth by fine sand in layers not exceeding 150 mm. as directed and consolidating same by thorough saturation with water ramming complete, including the cost of supply of sand. (Payment to be made on measurement of finished quantity) | Item no-6 | 89.098 | Cu.m |
| 7 | 7 | (I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) 1:3:6 (A) [Pakur Variety] | Item no-7 | 55.124 | Cu.m |
| 8 | 8 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. | Item no-8 | 549.323 | Sqm |
| 9 | 9 | Supplying and laying Polythene Sheet (150gm/sq.m.) over damp proof course or below flooring or roof terracing or in foundation trenches. | Item no-9 | 124.938 | Sqm |
| 10 | 10 | Ordinary Cement Concrete [ Mix 3 : 1.5 : 1 ] Cement concrete with graded stone chips (20 mm.size) excluding shuttering and reinforcement, if any, in ground floor. | Item no-10 | ||
| 11 | 11 | Pakur Variety | Item no-11 | ||
| 12 | 12 | Upto 4 m. | Item no-12 | ||
| 13 | 13 | (a) In foundation | Item no-13 | 114.076 | Cu.m |
| 14 | 14 | (i) Ground Floor | Item no-14 | 76.601 | Cu.m |
| 15 | 15 | (ii) First Floor | Item no-15 | 69.089 | Cu.m |
| 16 | 16 | (iii) 2nd Floor | Item no-16 | 65.858 | Cu.m |
| 17 | 17 | (iii) 3rd Floor | Item no-17 | 7.405 | Cu.m |
| 18 | 18 | Hire & labour charges for shuttering with centering and necessary staging upto 4M using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels, curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) | Item no-18 | ||
| 19 | 19 | (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering\nin any concrete work | Item no-19 | ||
| 20 | 20 | i) Foundation and Plinth | Item no-20 | 452.587 | SqM |
| 21 | 21 | ii) Superstructure | Item no-21 | ||
| 22 | 22 | (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering\nin any concrete work | Item no-22 | ||
| 23 | 23 | (i) Ground Floor | Item no-23 | 723.298 | Cu.m |
| 24 | 24 | (ii) First Floor | Item no-24 | 658.847 | SqM |
| 25 | 25 | (iii) 2nd Floor | Item no-25 | 634.259 | SqM |
| 26 | 26 | (iii) 3rd Floor | Item no-26 | 80.057 | SqM |
| 27 | 27 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. | Item no-27 | ||
| 28 | 28 | (a) For works in foundation, basement and upto roof of ground floor / upto 4m. | Item no-28 | ||
| 29 | 29 | Ground floor | Item no-29 | 34.319 | MT. |
| 30 | 30 | (b) First Floor | Item no-30 | 13.559 | MT. |
| 31 | 31 | (c) 2nd Floor | Item no-31 | 12.925 | MT. |
| 32 | 32 | (c) 3rd Floor | Item no-32 | 1.453 | MT. |
| 33 | 33 | 250 mm Brick work with 1 st class bricks in cement mortar (1:6) in foundation | Item no-33 | ||
| 34 | 34 | (a) For Foundation & Plinth | Item no-34 | 44.118 | Cu.m |
| 35 | 35 | (b) In Superstructure | Item no-35 | ||
| 36 | 36 | (i) Ground Floor | Item no-36 | 54.99 | Cu.m |
| 37 | 37 | (ii) First Floor | Item no-37 | 39.242 | Cu.m |
| 38 | 38 | (iii) 2nd Floor | Item no-38 | 24.153 | Cu.m |
| 39 | 39 | (iii) 3rd Floor | Item no-39 | 10.149 | Cu.m |
| 40 | 40 | 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in ground floor. | Item no-40 | ||
| 41 | 41 | (a) Ground Floor | Item no-41 | 172.5 | sq.m |
| 42 | 42 | (b) First Floor | Item no-42 | 72.541 | sq.m |
| 43 | 43 | (c) 2nd Floor | Item no-43 | 120.665 | sq.m |
| 44 | 44 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide of required to match colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. | Item no-44 | ||
| 45 | 45 | A) Floor | Item no-45 | ||
| 46 | 46 | With Sand Cement Morter (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sq.m & joint filling using white cement slurry @ 0.20 kg/Sq.m. | Item no-46 | ||
| 47 | 47 | (b) Area of each tile above 0.09 sq.m. | Item no-47 | ||
| 48 | 48 | ii) Other than Coloured decorative including white | Item no-48 | ||
| 49 | 49 | First Floor | Item no-49 | 26.213 | sq.m |
| 50 | 50 | 2nd Floor | Item no-50 | 17.01 | sq.m |
| 51 | 51 | B) Wall | Item no-51 | ||
| 52 | 52 | With Sand Cement Morter (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sq.m & joint filling using white cement slurry @ 0.20 kg/Sq.m. | Item no-52 | ||
| 53 | 53 | (a) Area of each tile above 0.09 sq.m. | Item no-53 | ||
| 54 | 54 | ii) Other than Coloured decorative including white | Item no-54 | ||
| 55 | 55 | First Floor | Item no-55 | 34.868 | sq.m |
| 56 | 56 | 2nd Floor | Item no-56 | 96.203 | sq.m |
| 57 | 57 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. | Item no-57 | ||
| 58 | 58 | (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. | Item no-58 | ||
| 59 | 59 | b) First Floor | Item no-59 | 4.844 | Qntl. |
| 60 | 60 | c) 2nd Floor | Item no-60 | 6.851 | Qntl. |
| 61 | 61 | d) 3rd Floor | Item no-61 | 0.389 | Qntl. |
| 62 | 62 | Supplying fting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straitning if required, fixing lugs in cement concrete ( 4:2:1) with stone chips 19 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. | Item no-62 | ||
| 63 | 63 | Flash butt welded windows and ventilators | Item no-63 | ||
| 64 | 64 | (no shop priming will be allowed to facilitate inspection of workmanship) | Item no-64 | ||
| 65 | 65 | Without integrated grills. | Item no-65 | ||
| 66 | 66 | (b) Openable steel windows as per IS sizes with side hunge shutters and horizotal glazing bars, with or outhout fixed type ventolators ( the extra rate admissible for the openable portion only.) | Item no-66 | ||
| 67 | 67 | b) First Floor | Item no-67 | 30.78 | sq.m |
| 68 | 68 | c) 2nd Floor | Item no-68 | 43.38 | sq.m |
| 69 | 69 | d) 3rd Floor | Item no-69 | 2.43 | sq.m |
| 70 | 70 | iv) Two point nose steel handle including fitting and fixing. | Item no-70 | ||
| 71 | 71 | b) First Floor | Item no-71 | 62 | Each |
| 72 | 72 | c) 2nd Floor | Item no-72 | 84 | Each |
| 73 | 73 | d) 3rd Floor | Item no-73 | 4 | Each |
| 74 | 74 | ii) steel peg stay 300 mm long including fitting and fixing. | Item no-74 | ||
| 75 | 75 | b) First Floor | Item no-75 | 62 | Each |
| 76 | 76 | c) 2nd Floor | Item no-76 | 84 | Each |
| 77 | 77 | d) 3rd Floor | Item no-77 | 4 | Each |
| 78 | 78 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracigs properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. a) Ground Floor | Item no-78 | 7.56 | Sq.m |
| 79 | 79 | Wood work in door and window frame fitted and fixed complete icluding a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron butt Hinges amd M.S.clamp. | Item no-79 | ||
| 80 | 80 | (e) Sal : Malayasian. | Item no-80 | ||
| 81 | 81 | a) First Floor | Item no-81 | 0.039 | Cu.m |
| 82 | 82 | b) 2nd Floor | Item no-82 | 0.156 | Cu.m |
| 83 | 83 | c) 3rd Floor | Item no-83 | 0.156 | Cu.m |
| 84 | 84 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, inclkuding fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. | Item no-84 | ||
| 85 | 85 | (a) 35 mm thick shutters (single leaf) | Item no-85 | ||
| 86 | 86 | a) First Floor | Item no-86 | 1.924 | Sq.m |
| 87 | 87 | b) 2nd Floor | Item no-87 | 1.924 | Sq.m |
| 88 | 88 | c) 3rd Floor | Item no-88 | 1.924 | Sq.m |
| 89 | 89 | M.S. clamp for fixing door and window frame made of flat bent bar, end bifurcated, fixed in cement concrete with stone chips (4:2:1) fitted and fixed complete as per direction. (a) 40mm. X 6mm, 250mm. Length. | Item no-89 | 34 | Each |
| 90 | 90 | Supplying 'Brass floor door stopper, including fitting and fixing complete. | Item no-90 | 18 | Each |
| 91 | 91 | Anodised aluminium barrel/ tower/ socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws. (ix) 300mm long x 10mm dia. bolt. | Item no-91 | 18 | Each |
| 92 | 92 | Anodised aluminium Aldrop/Sliding bolts of approved quality manufactgured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. (iii) 300mm x 16mm dia. bolt. | Item no-92 | 18 | Each |
| 93 | 93 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws. (v) 100 x 63 x 3.2 mm. | Item no-93 | 63 | Each |
| 94 | 94 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete. (vii) 150mm grip x 12mm dia rod. | Item no-94 | 18 | Each |
| 95 | 95 | Supplying 'Godrej' mortice lock with latch and keys 6 levers, including fitting and fixing complete. | Item no-95 | 9 | Each |
| 96 | 96 | Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. (a) Heavy type (I.S.I. size 3) | Item no-96 | 9 | Each |
| 97 | 97 | Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of horizontal and vertical member and joined them by heat welding. Entire door frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. An additional 5mm thick PVC sheet with desired colour/shade to be provided at the exposed surface and three nos 5mm thick PVC sheet to be provided as gap insert. The door frame to be fixed with wall by using 8mm dia. and 100mm long strainless steel screws and PVC fasteners. A minimum of 4 nos. screws to be provided for each vertical member & 2 nos. for horizontal member all complete as per direction of Engineer-in-Charge. b) Pre-laminated Colour. | Item no-97 | 34.65 | Mtr |
| 98 | 98 | Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59mm x 30mm section with 2.0mm (+/- 0.2mm) wall thickness, horizontal & vertical section shall be fixed to each other by self tapping screws and one solid polymeric / M.S. galvanised tubular L-shaped brackets 100mm x 200mm in each corner of the shutter frame for placing hinges, polymer based multicavity holoow section of 120 mm x 30 mm with 2.0mm (+/- 0.2mm) wall thickness will be fitted in the middle as lock rail, reinforced by solid polymer bar of 200mm long at both ends & screws for both sides. The section frame will then be fitted in by PVC panels of size 100mm x 25mm, with wall thickness 1.2mm (+/- 0.2mm) and 2 nos. of 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials and labour hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt, door ring etc. | Item no-98 | 9.923 | Mtr |
| 99 | 99 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. | Item no-99 | ||
| 100 | 100 | 1st floor | Item no-100 | 30.78 | Sq.m |
| 101 | 101 | 2nd floor | Item no-101 | 43.38 | Sq.m |
| 102 | 102 | 3rd floor | Item no-102 | 2.43 | Sq.m |
| 103 | 103 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor) . | Item no-103 | ||
| 104 | 104 | (i) With 4:1 cement mortar | Item no-104 | ||
| 105 | 105 | 15 mm thick with cement mortar (External) (out Side ) | Item no-105 | ||
| 106 | 106 | (i) Ground Floor | Item no-106 | 417.325 | SqM |
| 107 | 107 | (ii) First Floor | Item no-107 | 199.965 | SqM |
| 108 | 108 | (iii) 2nd Floor | Item no-108 | 307.9 | SqM |
| 109 | 109 | (iii) 3rd Floor | Item no-109 | 59.73 | SqM |
| 110 | 110 | (b) 20 mm. thick plaster (Internal) | Item no-110 | ||
| 111 | 111 | (ii) With 6:1 cement mortar | Item no-111 | ||
| 112 | 112 | (i) Ground Floor | Item no-112 | 794.583 | sq.m |
| 113 | 113 | (ii) First Floor | Item no-113 | 296.249 | sq.m |
| 114 | 114 | (iii) 2nd Floor | Item no-114 | 432.45 | sq.m |
| 115 | 115 | (iii) 3rd Floor | Item no-115 | 47.939 | sq.m |
| 116 | 116 | 10 mm thick with cement mortar (ceiling) | Item no-116 | ||
| 117 | 117 | (ii) With 4:1 cement mortar | Item no-117 | ||
| 118 | 118 | (i) Ground Floor | Item no-118 | 234.375 | Sq.m |
| 119 | 119 | (ii) First Floor | Item no-119 | 214.938 | Sq.m |
| 120 | 120 | (iii) 2nd Floor | Item no-120 | 210.281 | Sq.m |
| 121 | 121 | (iii) 3rd Floor | Item no-121 | 18.375 | Sq.m |
| 122 | 122 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. | Item no-122 | ||
| 123 | 123 | (i) Ground Floor | Item no-123 | 162.605 | SqM |
| 124 | 124 | Priming one coat on timber, plastered surface with synthetic oil bound primer of approved quality including smooth ening surfaces by sand papering etc. | Item no-124 | ||
| 125 | 125 | in ground floor & 1st floor | Item no-125 | 52.92 | Sq.m |
| 126 | 126 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smooth ening surfaces by sand papering etc. | Item no-126 | ||
| 127 | 127 | Ground floor | Item no-127 | 167.58 | Sq.m |
| 128 | 128 | 1st floor | Item no-128 | 30.78 | Sq.m |
| 129 | 129 | 2nd floor | Item no-129 | 43.38 | Sq.m |
| 130 | 130 | 3rd floor | Item no-130 | 2.43 | Sq.m |
| 131 | 131 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary . | Item no-131 | ||
| 132 | 132 | On timber surface | Item no-132 | ||
| 133 | 133 | With super gloss (hi-gloss) - | Item no-133 | 52.92 | Sq.m |
| 134 | 134 | On Steel Surface | Item no-134 | ||
| 135 | 135 | With super gloss (hi-gloss) - | Item no-135 | ||
| 136 | 136 | (iv) Two coats (with any shade except white) | Item no-136 | ||
| 137 | 137 | Ground floor | Item no-137 | 215.964 | Sq.m |
| 138 | 138 | 1st floor | Item no-138 | 30.78 | Sq.m |
| 139 | 139 | 2nd floor | Item no-139 | 43.38 | Sq.m |
| 140 | 140 | 3rd floor | Item no-140 | 2.52 | Sq.m |
| 141 | 141 | (b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) | Item no-141 | ||
| 142 | 142 | Ground floor | Item no-142 | 1028.96 | Sq.m |
| 143 | 143 | 1 st floor | Item no-143 | 647.388 | Sq.m |
| 144 | 144 | 2 nd | Item no-144 | 642.7 | Sq.m |
| 145 | 145 | 3 rd | Item no-145 | 66.314 | Sq.m |
| 146 | 146 | Supplying, fitting and fixing UPVC pipes A - type and fittings conforming to IS 13592-1992 with all necessary clamps nails including making holes in walls, etc. and cutting trenches in any soil, through masonry concrete structure etc. if necessary and mending good damages including jointing with jointing materials ( Spun yarn, valamoid / bitumen / M. seal etc.) complete. | Item no-146 | ||
| 147 | 147 | A) UPVC Pipes | Item no-147 | ||
| 148 | 148 | 110mm dia | Item no-148 | 73.8 | Mtr |
| 149 | 149 | B) UPVC Fittings | Item no-149 | ||
| 150 | 150 | Bend 87.5 degree 110mm dia | Item no-150 | 7 | Nos |
| 151 | 151 | Shoe 110 mm dia | Item no-151 | 7 | Nos |
| 152 | 152 | Supplying fitting approved type ventilator in position after cutting holes in walls, setting in cement mortar mending damages to wall and plaster and two coats of paint of approved brand sand shade. Payment of mending two damages of wall & plaster and painting to be made separately.(b) R.C.C ventilator of 20 mm. thick | Item no-152 | 48 | Nos |
| 153 | 153 | Supplying fitting fixing fan hook for ceiling with 1 metre long 16 mm dia rod complete including mending damages. | Item no-153 | 60 | Each |
| 154 | 154 | Applying Interior grade Acrylic primer .(b) Two Coats | Item no-154 | ||
| 155 | 155 | (i) Ground Floor | Item no-155 | 1028.96 | Sq.m |
| 156 | 156 | (ii) First Floor | Item no-156 | 511.187 | sq.m |
| 157 | 157 | (iii) 2nd Floor | Item no-157 | 642.731 | Sq.m |
| 158 | 158 | (iii) 3rd Floor | Item no-158 | 66.314 | Sq.m |
| 159 | 159 | Applying Acrylic Emulsion Paint of approved make and brand on walls\nand ceiling including sand papering in intermediate coats including putty\n(to be done under specific instruction of Superintending Engineer) :\n(Two coats) | Item no-159 | ||
| 160 | 160 | Internal Surface all floors | Item no-160 | ||
| 161 | 161 | (i) Ground Floor | Item no-161 | 2249.18 | Sq.m |
| 162 | 162 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the Engg-in-charge. (b) Two Coats | Item no-162 | ||
| 163 | 163 | (i) Ground Floor | Item no-163 | 225.21 | SqM |
| 164 | 164 | (ii) First Floor | Item no-164 | 199.965 | SqM |
| 165 | 165 | (iii) 2nd Floor | Item no-165 | 307.9 | SqM |
| 166 | 166 | (iii) 3rd Floor | Item no-166 | 59.73 | SqM |
| 167 | 167 | Protective and decorative acrylic exterior emulsion paint of approved quality as per manufacturers specification and as per EIC to be applied over acrylic primer as required. The rate includes cost of materials, labour, scaffolding and all incidental charges but excluding the cost of primer. In ground floor( two coats) Premium 100% Acrylic Emulsion | Item no-167 | ||
| 168 | 168 | (i) Ground Floor | Item no-168 | 225.21 | SqM |
| 169 | 169 | (ii) First Floor | Item no-169 | 199.965 | SqM |
| 170 | 170 | (iii) 2nd Floor | Item no-170 | 307.9 | SqM |
| 171 | 171 | (iii) 3rd Floor | Item no-171 | 59.73 | SqM |
| 172 | 172 | Polymer concrete made with water resistant bonding agent of synthetic\nrubber emulsion as per manufacturer's specification excluding the cost of\ncement concrete (2.75 Kg / bag of cement)\nNote : Payment on volume of (1 : 1½ : 3) Concrete. | Item no-172 | 17.111 | Sq.m |
| 173 | 173 | 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick\n(avg) cement mortar (1:4) in floor, stair & lobby including\npointing in cement slurry with admixture of pigment matching\nthe stone shade, including grinding & polishing as per\ndirection of Engineer - in - charge to match with the existing\nwork. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0\nkg/Sq.m] | Item no-173 | 309.65 | Sq.m |
| 174 | 174 | Extra cost of labour for prefinished and premoulded Nosing\nto treads of steps, railing, window sill etc. of Kota Stone | Item no-174 | 309.65 | Sq.m |
| 175 | 175 | Extra cost of labour for grinding Kota Stone Floor in treads\nand riser of Steps. | Item no-175 | 309.65 | Sq.m |
| 176 | 176 | Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three ) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) | Item no-176 | 23.05 | Mtr. |
| 177 | 177 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tilesusing cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied\nby the contrr]e) | Item no-177 | ||
| 178 | 178 | (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/Sq.m white cement for joint filling withpigment. | Item no-178 | ||
| 179 | 179 | (A) Deep Colour & White | Item no-179 | ||
| 180 | 180 | a) Ground floor | Item no-180 | ||
| 181 | 181 | b) First Floor | Item no-181 | 171.642 | SqM |
| 182 | 182 | c) 2nd Floor | Item no-182 | 179.257 | SqM |
| 183 | 183 | Supplying, fitting, fixing marble slab/tiles, 15 mm. to 18 mm. thick in dado / wall in 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks applying white cement slurry @ 4.4 kg/ sq.m at the back side of marble & pointing in cement mortar (1:2) (1 cement, 2 marble dust) with admixture of pigment matching the stone shades including polishing all complete as per direction of the Engineer-in-charge including cost of materials, labours, scaffolding, staging, curing complete. [White cement, Pigment to be supplied by the Agency] | Item no-183 | ||
| 184 | 184 | (a)WithMakrana plainpink /Adranga Pink/GarbhGulabi / Udaypur Pink / Udaypur green / Black Bhalsana | Item no-184 | ||
| 185 | 185 | (iii) Area of each slab/tile exceeding 0.6 sq.m but not excedding 1 sq.m. | Item no-185 | 87.375 | SqM |
| 186 | 186 | Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430/1510 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 4 mm thick High Pressure Steam Cured Non Asbestos pearl designer Fibre Cement Standard Ceiling Board (Density > 1500Kg/m3) of size 595 mm X 595 mm, conforming IS 14862 & Type A Category IV of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge.\nIn ground floor. | Item no-186 | ||
| 187 | 187 | a) False Ceiling (with 4mm thick Pearl Designer Fibre Cement Board and E-Grid\nT-2430/1510). | Item no-187 | 92.236 | SqM |
| 188 | 188 | Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before flooring works,using cement @1.75 kg./sq.m. all complete including all materials and labour in ground floor. | Item no-188 | 105.003 | SqM |
| 189 | 189 | Supplying fitting & fixing cast iron raised rain proof tank cover 500 mm dia with nlocking arrangements. | Item no-189 | 6 | Nos |
| 190 | 190 | Filling in foundation or plinth by fine sand in layers not exceeding 150 mm. as directed and consolidating same by thorough saturation with water ramming complete, including the cost of supply of sand. | Item no-190 | 12.586 | Nos |
| 191 | 191 | INTERNAL SANITARY & PLUMBING WORK | Item no-191 | ||
| 192 | 192 | Supplying, fitting and fixing shower rose of approved brand and make. | Item no-192 | ||
| 193 | 193 | (h) Polythene overhead shower of approved make, | Item no-193 | 8 | Nos |
| 194 | 194 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). | Item no-194 | ||
| 195 | 195 | 50 mm Dia, | Item no-195 | 1 | Nos |
| 196 | 196 | 40 mm Dia, | Item no-196 | 2 | Nos |
| 197 | 197 | Supplying, fitting and fixing bib cock or stop cock. | Item no-197 | ||
| 198 | 198 | (b) (ii) Chromium plated Concealed Stop Cock (Equivalent to code no-514(A) & Model- Tropical / Sumthing Special of ESSCO or similar brand). | Item no-198 | 10 | Nos |
| 199 | 199 | (c) (ii) Chromium plated Bib Cock with wall flange (Equivalent to code no-5047 & Model- Florentine of Jaquar or similar brand). | Item no-199 | 15 | Nos |
| 200 | 200 | Supplying, fitting and fixing C.I. holder bat clamp including cutting holes in wall etc. and mending good all damages in cement concrete with jhama chips (4:2:1) and cement plaster (6:1) to match and curing complete in all respect. | Item no-200 | 53 | Nos |
| 201 | 201 | (iv) 32mm | Item no-201 | 66 | Nos |
| 202 | 202 | (iii) 25mm | Item no-202 | 66 | Nos |
| 203 | 203 | Supplying fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 & Threaded to match with GI pipes as per IS : 1239 (Part - I). With all nacessary accessories, specials viz socket, bend, tee, union, cross, elbo, nipple, longscrew, R/socket, R/tee, short piece etc. fitted with holder bats clamp, including cutting pipes, making threads, fitting fixing etc. complete in all respect including cost of all necessary fittings as required jointing materials and two coats of paiting with approved paint in any position above ground. (Payment will be made on centre line measurement of the total pipeline including all specials.No separate payment will be made for accesories, specials. Payment for painting will be made seperately). | Item no-203 | ||
| 204 | 204 | a) For Exposed Work | Item no-204 | ||
| 205 | 205 | PVC pipes | Item no-205 | ||
| 206 | 206 | 50 mm dia | Item no-206 | 52.9 | Nos |
| 207 | 207 | 40 mm dia | Item no-207 | 9.7 | Nos |
| 208 | 208 | 32 mm dia | Item no-208 | 66.2 | Nos |
| 209 | 209 | 25 mm dia | Item no-209 | 66.2 | Nos |
| 210 | 210 | b) For concealed work | Item no-210 | ||
| 211 | 211 | 15 mm dia | Item no-211 | 58.674 | Nos |
| 212 | 212 | 20 mm dia | Item no-212 | 61.7 | Nos |
| 213 | 213 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. | Item no-213 | 7 | Nos |
| 214 | 214 | Supplying P.V.C. water storage tank of approved quality with closed top\nwith lid (Black) - Multilayer 2000 Ltr. Capacity, | Item no-214 | 3 | Nos |
| 215 | 215 | (ii) Above 1500 litre upto 5000 litre capacity. | Item no-215 | 1 | Nos |
| 216 | 216 | (b) Extra for each additional story | Item no-216 | 2 | Nos |
| 217 | 217 | Supplying,fitting and fixing vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. | Item no-217 | ||
| 218 | 218 | ii)630 mm x 450 mm size | Item no-218 | 11 | Nos |
| 219 | 219 | Supplying,fitting and fixing approved brand P.V.C.CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. | Item no-219 | ||
| 220 | 220 | iii) 600 mm long | Item no-220 | 7 | Nos |
| 221 | 221 | iv) 750 mm long | Item no-221 | 21 | Nos |
| 222 | 222 | Supplying,fitting and fixing approved brand 32 mm dia P.V.C.waste pipe, with PVC coupling at one end fitted with necessary clamps. | Item no-222 | ||
| 223 | 223 | ii) 750 mm long | Item no-223 | 16 | Nos |
| 224 | 224 | Supply of UPVC pipes (B Type) & fittings conforming to IS - 13592 - 1992. | Item no-224 | ||
| 225 | 225 | (i) Single Socketed - 3.00 m length | Item no-225 | ||
| 226 | 226 | b) 110 mm dia | Item no-226 | 111 | Nos |
| 227 | 227 | (iii) Single socket 1.8 m length | Item no-227 | ||
| 228 | 228 | b) 110 mm dia | Item no-228 | 7.2 | Nos |
| 229 | 229 | Fittings. | Item no-229 | ||
| 230 | 230 | i) Coupler | Item no-230 | ||
| 231 | 231 | b) 110 mm dia | Item no-231 | 32 | Nos |
| 232 | 232 | v) Plain Y | Item no-232 | ||
| 233 | 233 | b) 110 mm dia | Item no-233 | 8 | Nos |
| 234 | 234 | ix) Bend 45° | Item no-234 | ||
| 235 | 235 | b) 110 mm dia | Item no-235 | 10 | Nos |
| 236 | 236 | x) Bend 87.5° | Item no-236 | ||
| 237 | 237 | b) 110 mm dia | Item no-237 | 8 | Nos |
| 238 | 238 | xi) Door bend (T.S ) | Item no-238 | ||
| 239 | 239 | b) 110 mm dia | Item no-239 | 12 | Nos |
| 240 | 240 | xxi) 110 mm x 110 mm P. Trap | Item no-240 | ||
| 241 | 241 | 75 mm | Item no-241 | 16 | Nos |
| 242 | 242 | Ref Item no- 23.00 ( (B) Page no - 66 PWD (P & S ) Schedule -2015 -16 | Item no-242 | ||
| 243 | 243 | (iii) Door Tee | Item no-243 | 16 | Nos |
| 244 | 244 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps(any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipe line including specials). | Item no-244 | ||
| 245 | 245 | ii) 110 mm dia | Item no-245 | 118.2 | Nos |
| 246 | 246 | (B) Under Ground | Item no-246 | ||
| 247 | 247 | ii) 110 mm dia | Item no-247 | 79 | Nos |
| 248 | 248 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts,nuts etc. | Item no-248 | ||
| 249 | 249 | (a) With 'P' trap | Item no-249 | 7 | Nos |
| 250 | 250 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. | Item no-250 | ||
| 251 | 251 | (ii) 470 mm x 280 mm x 340 mm | Item no-251 | 7 | Nos |
| 252 | 252 | (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). | Item no-252 | 29 | Nos |
| 253 | 253 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm | Item no-253 | 5 | Nos |
| 254 | 254 | Supplying,fitting and fixing 32 mm dia. Flush pipe of approved make with necessary fixing materials and clamps complete. | Item no-254 | ||
| 255 | 255 | i) Polythene Flush Pipe | Item no-255 | 7 | Nos |
| 256 | 256 | Supplying, fitting and fixing liquid soap container. | Item no-256 | ||
| 257 | 257 | (c) Fibre glass | Item no-257 | 11 | Nos |
| 258 | 258 | Supplying, fitting and fixing soap holder. | Item no-258 | ||
| 259 | 259 | (b) Fibre glass | Item no-259 | 11 | Nos |
| 260 | 260 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm. | Item no-260 | 11 | Nos |
| 261 | 261 | Supplying, fitting and fixing towel rail with two brackets. | Item no-261 | ||
| 262 | 262 | (iii) 25 mm dia. and 750 mm long | Item no-262 | 18 | Nos |
| 263 | 263 | Constructing Inspection pit of inside measurement 600 x 600 mm x upto 600 mm. (depth) with 250 mm. thick 1st class brick work in cement mortar (4:1) on all sides, bottom of the pit consisting of 100 mm. thick cement concrete (6:3:1) with Stone chips over a layer of jhama brick flat soling 15 mm. thick (4:1) cement plaster to inside walls and outside walls upto G.L. and 20 mm. thick (4:1) plaster to bottom of the pit, providing necessary invert with cement concrete (6:3:1) with Stone chips as per direction, neat cement finishing to entire internal surfaces, top of hte pit covered with 100 mm. thick R.C.C. Slab (3:1.5:1) with stone chips and necessary reinforcements upto 1% and shuttering including 10 mm. thick cement plaster (4:1) in all external surfaces of the slab and one 560 mm. dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earth work in excavation in all sorts of soil , filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. | Item no-263 | ||
| 264 | 264 | i) With pakur variety. | Item no-264 | 37 | Nos |
| 265 | 265 | Construction of Septic tank of different capacities as per approved drawing awith 1st class brick work in cement mortar (4:1) including two 560 mm. dia. R.C.C. manhole cover of approved make supplied , fitted and fixed in the 100 mm thick R.C.C. (1:1.5:3) top slab with necessary fittings, 20 mm. thick cement plaster (4:1) with neat cement finish tot he internal surfaces and 15 mm. thick cement plaster (4:1) to outside wall upto 200 mm. below G.L. floor finished with 25 mm. thick grey artificial stone 100 mm thick R.C.C. (1:1.5:3) bottem slab including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavating earth in all sorts of soil, shoring, bailing and pumping out water as necessary, ramming,dressing the bed and refilling the sides of the tank with earth,removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes,joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 5% by weight of cement with all costs of labour and materials. | Item no-265 | ||
| 266 | 266 | (iv) For 100 users | Item no-266 | ||
| 267 | 267 | i) With pakur variety. | Item no-267 | 1 | Nos |
| 268 | 268 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (4:1) band all round and cement brick work (4:1) upto 0.90 metre from top with 20 mm thick cement plastering (4:1) to inside face upto the depth of cement brick work, 15 mm thick cement plaster (4:1) on outer face from top of the well upto G.L. and 10 mm thick cement plaster (4:1) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement concrete (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. | Item no-268 | ||
| 269 | 269 | (a) With 250 mm thick dry brick work and 250 mm thick cement brick work (6:1) and 1.00 m.inside dia. | Item no-269 | ||
| 270 | 270 | (Other than SAIL/TATA/RINL) | Item no-270 | 1 | Nos |
| 271 | 271 | Supplying,fitting and fixing in position R.C.C. Manhole/pit cover of approved make with rim of approved make (Heavy type). | Item no-271 | ||
| 272 | 272 | (ii) 560 mm dia. | Item no-272 | 3 | Nos |
| 273 | 273 | Supplying, fitting and fixing PVC pipes for underground work of\napproved make of Schedule 80 (medium duty) conforming to ASTMD -\n1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with\nall necessary accessories, specials viz. socket, bend, tee, union, cross,\nelbo, nipple, longscrew, reducing socket, reducing tee, short piece etc.\nfitted including cost of all materials ,jointing materials, cutting pipes,\nmaking threads ,cutting trenches upto 1.5 metre below surface in all sorts\nof soil and refilling the same as directed complete in all respect. (Payment\nwill be made on the centre line measurement of the total pipe line\nincluding all specials No separate payment will be made for accessories,\nspecials.) | Item no-273 | ||
| 274 | 274 | PVC Pipes 200 mm dia. | Item no-274 | 100 | Mtr. |
| 275 | 275 | Supply & Installation of H.P three phase Monoblock pump, Discharge Range 72Lps, Total Hade Range 110 meter Make: Krilosker or Equivalent.including supply and installation of DOL starter with s&F necessary cable et. | Item no-275 | 1 | Nos |
| 276 | 276 | Electrical work | Item no-276 | ||
| 277 | 277 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required | Item no-277 | ||
| 278 | 278 | 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC | Item no-278 | 1304 | RM |
| 279 | 279 | 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC | Item no-279 | 1032 | RM |
| 280 | 280 | 3x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC | Item no-280 | 589 | RM |
| 281 | 281 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish(2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC) | Item no-281 | ||
| 282 | 282 | Average run 6 mtr | Item no-282 | 48 | Point |
| 283 | 283 | Average run 8 mtr | Item no-283 | 16 | Point |
| 284 | 284 | Average run 9 mtr | Item no-284 | 73 | Point |
| 285 | 285 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish.2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC | Item no-285 | ||
| 286 | 286 | On Board | Item no-286 | 41 | Point |
| 287 | 287 | 4. Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]\n | Item no-287 | ||
| 288 | 288 | Average run 9 mtr | Item no-288 | 55 | Point |
| 289 | 289 | Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (All L&T make) | Item no-289 | ||
| 290 | 290 | 100AMP | Item no-290 | 3 | Each |
| 291 | 291 | 200AMP | Item no-291 | 1 | Each |
| 292 | 292 | Bus Bar | Item no-292 | ||
| 293 | 293 | Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required ( Alluminiuam). | Item no-293 | ||
| 294 | 294 | 4 bars,415 V, 200 A Dimension of Al. bars [85mm long] Dimension of Sheet Metal Box.300x150mm | Item no-294 | 1 | Each |
| 295 | 295 | SPN DB | Item no-295 | ||
| 296 | 296 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing\nattachment. | Item no-296 | ||
| 297 | 297 | 2+4 way (L&T Make) | Item no-297 | 16 | Each |
| 298 | 298 | 2+6 way (L&T Make) | Item no-298 | 10 | Each |
| 299 | 299 | Supplying and fixing 240V MCB Isolator on din rail of existing DBs and necessary connection. | Item no-299 | ||
| 300 | 300 | 25 Amp (ABB Make) | Item no-300 | 16 | Each |
| 301 | 301 | 40 Amp (L&T Make) | Item no-301 | 42 | Each |
| 302 | 302 | Supplying and fixing 2 WayMCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment | Item no-302 | 32 | Each |
| 303 | 303 | Supplying and fixing 415 V MCB Isolator on din rail of existing DBs and necessary connection. | Item no-303 | ||
| 304 | 304 | 40 Amp (L&T Make) | Item no-304 | 6 | Each |
| 305 | 305 | 63Amp (L&T Make) | Item no-305 | 6 | Each |
| 306 | 306 | Supplying and fixing 6-32 A 240 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection | Item no-306 | 184 | Each |
| 307 | 307 | Supplying and fixing 6-32 A 415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection | Item no-307 | 3 | Each |
| 308 | 308 | Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Up to 160A ( Make: L&T) Up to 160A | Item no-308 | ||
| 309 | 309 | 4 way Enclosure (LTVD04MGN) | Item no-309 | 3 | Each |
| 310 | 310 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment ( Make: L&T) | Item no-310 | ||
| 311 | 311 | 4 way Enclosure (LTTD04N) | Item no-311 | 5 | Each |
| 312 | 312 | Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection 9 (Make: L&T) | Item no-312 | ||
| 313 | 313 | 125 A | Item no-313 | 3 | Each |
| 314 | 314 | FAN | Item no-314 | ||
| 315 | 315 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. | Item no-315 | 36 | Each |
| 316 | 316 | Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire. | Item no-316 | 18 | RM |
| 317 | 317 | Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box. | Item no-317 | 52 | Each |
| 318 | 318 | Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For Al | Item no-318 | ||
| 319 | 319 | 23 cm Exhaust fan (9\") | Item no-319 | 3 | Each |
| 320 | 320 | 30 cm Exhaust fan (12\") | Item no-320 | 7 | Each |
| 321 | 321 | 38 cm Exhaust fan (15\") | Item no-321 | 2 | Each |
| 322 | 322 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: | Item no-322 | ||
| 323 | 323 | 23 cm (9\") | Item no-323 | 3 | Each |
| 324 | 324 | 30 cm (12\") | Item no-324 | 7 | Each |
| 325 | 325 | 38 cm (15\") | Item no-325 | 2 | Each |
| 326 | 326 | Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. | Item no-326 | 36 | Each |
| 327 | 327 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 Kg./m.Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in- Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor | Item no-327 | 3 | Sq.mtr |
| 328 | 328 | Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling with HW block and ceiling plates, nipples etc. as required\n | Item no-328 | 4 | Each |
| 329 | 329 | 16. Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.\n | Item no-329 | 48 | Each |
| 330 | 330 | Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length\n | Item no-330 | 91 | Each |
| 331 | 331 | Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required | Item no-331 | 32 | Each |
| 332 | 332 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. | Item no-332 | 31 | Each |
| 333 | 333 | Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8watt CFL / 100 watts GLS lamp complete set.\n | Item no-333 | 2 | Each |
| 334 | 334 | Street Light | Item no-334 | ||
| 335 | 335 | Supply of 2 Core 4 Sq mm Alluminium XLPE /PVC Armoured cable for 16 A DP main switch to Out side DP Main Switch and Out Side DP Main Switch to Different Wall Bracket Light Point. | Item no-335 | 348 | RM |
| 336 | 336 | Laying of cable 2 core 4 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting | Item no-336 | 348 | RM |
| 337 | 337 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables of 2 core 4 sqmm | Item no-337 | 16 | Each |
| 338 | 338 | Finishing the end of 2 core 4 sqmm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials | Item no-338 | 16 | Set |
| 339 | 339 | Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamp with bolts, nuts etc. including painting with anticorrosive paint | Item no-339 | 8 | Set |
| 340 | 340 | Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite / Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. Supply & Fixing 240 V 16A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required | Item no-340 | 2 | Set |
| 341 | 341 | Supply of 48W LED 6000KENDURA CITYLINER NEO New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium roadway luminaire with high power LEDs as light source and electronic driver.Mpodel No. LHETAXU7PN6W048 Make Havells or Equivalent | Item no-341 | 8 | Each |
| 342 | 342 | Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. | Item no-342 | 8 | Each |
| 343 | 343 | Earthig arangement | Item no-343 | ||
| 344 | 344 | Excavation of soil for installation of Earth Electrode and filling & ramming for soft Soil. | Item no-344 | 16 | Cu. Mtr |
| 345 | 345 | Earthing with 50mm dia G.I. pipe (TATA-M) 3.64mm thick * 3.04 Mtrs. Long and 1*4 WG wire (4 Mtr. Long) 13mm dia * 80mm long G.I. bolts double washers incl. S&F dia pipe protection (1Mtr long) to be filled with bitumen partly under the G.L. and partly above G.L. driven to an average depth of 3.65Mtrs .below the G.L. and restoring the surface duly remmed | Item no-345 | 8 | Set |
| 346 | 346 | Extra treatment of soil by using salt and charcoal for pipe electrode as required. | Item no-346 | 8 | Item |
| 347 | 347 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe | Item no-347 | 8 | Item |
| 348 | 348 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with\nGI bolts, nuts, washers, spacing insulators etc. as required | Item no-348 | 2 | Mtr |
| 349 | 349 | Connecting the equipments to early busbar incl. S&F No. 8 SWG G.I. wire on wall /floor with stapels as per G.S. | Item no-349 | 80 | Mtr |
| 350 | 350 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required | Item no-350 | ||
| 351 | 351 | 50 mm dia | Item no-351 | 18 | RM |
| 352 | 352 | Supplying and fixing compression type gland complete with brass\ngland, brass ring & rubber ring for dust & moisture-proof entry of\nXLPE/PVC armoured cables as below | Item no-352 | ||
| 353 | 353 | For 3 core | Item no-353 | ||
| 354 | 354 | upto 10 sqmm | Item no-354 | 2 | Each |
| 355 | 355 | upto 25 sqmm | Item no-355 | 6 | Each |
| 356 | 356 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials | Item no-356 | ||
| 357 | 357 | 4 core 10 sqmm cable | Item no-357 | 2 | Set |
| 358 | 358 | 4 core 25 sqmm cable | Item no-358 | 6 | Set |
| 359 | 359 | Supplying of one no 4 core 25 sqmm Alluminiuam armoured cable. Make : Havells/ Mascab/ Pollycab. The above cable run from SStn to incomming of Existing Karishak Bazar and existing Office building | Item no-359 | 5 | Set |
| 360 | 360 | Supplying of one no 4 core 10 sqmm Alluminiuam armoured cable. Make : Havells/ Mascab/ Pollycab. The above cable run from SStn to incomming of Existing Karishak Bazar and existing Office building | Item no-360 | 5 | Set |
| 361 | 361 | Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. | Item no-361 | 31 | Each |
| 362 | 362 | Supply & Fixing 240 V, 3 nos. 16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. | Item no-362 | 38 | Each |
| 363 | 363 | Supply & Fixing 240 V, 25A Modular type socket, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. | Item no-363 | 7 | Each |
| 364 | 364 | Supplying of 240V 1200mm sweep AC ceiling fan of model no XP-390 havells make or equivalent colour approved by EIC | Item no-364 | 31 | Each |
| 365 | 365 | Supply of 240Volt Turbo Force SP 300 mm Heavy Duty Exhaust Fan Havells Make or equivalent | Item no-365 | 7 | Each |
| 366 | 366 | Supply of 240Volt Turbo Force SP 230 mm Ventilating Fans Havells Make or equivalent | Item no-366 | 3 | Each |
| 367 | 367 | Supply of 240Volt Turbo Force SP 450 mm,1400RPM Heavy Duty Exhaust Fan Havells Make or equivalent | Item no-367 | 2 | Each |
| 368 | 368 | Supply of Surface mounted LED downlighter with white powder coated aluminium housing with integrated electronic driver.Havells Make or equivalent | Item no-368 | 20 | Each |
| 369 | 369 | Supply of The Edgepro range of Slim-Fit low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology. At only 25mm deep including bracket, they are an ideal solution where ceiling voids are limited but high lumen output is required.Havells Make or equivalent Model No:LHEWELP7PL1W015 | Item no-369 | 32 | Each |
| 370 | 370 | Supply of SURFACE CUM RECESS T8 MIRROR OPTICS Model No:1x36W FTL T8 HF, Havells make or equivalent | Item no-370 | 41 | Each |
| 371 | 371 | Supply and installation of ESE Air Terminal:\nExternal, wide area, early streamer emission (ESE) type lightning arrestor made of robust 304L stainless steel. It is self sustaining with a NI-MH battery and ETFE solar cells on board and in full compliance of the Protection Radius worked out as per Rolling sphere concept& test Standard stated in NFC 17 102 Appendix C . It is capable of polarizing the tip with a voltage of 35 KV to 45 kV, synchronized with an approaching lightning and triggering a powerful upward streamer into the air, with average time gain of 25 microseconds earlier than naturally formed streamers.The lightning arrester must be able to be checked with the help of a handhold teletester within 50 mtr distance. The lightning Arrestor must be CPRI tested in India apart from approval from ALSTOM International High voltage Laboratory.CPRI test certificate should be uploaded in the tender. \nModel no. SAT 325 (Protection radius 42 Mtr as per protection level I )\n\n | Item no-371 | 1 | No |
| 372 | 372 | Supply and installation of Support Mast:\nA support mast of robust design, made with 40 mm dia. class C MS pipe duly galvanized with minimum 85 micron zinc coating, along with all accessories like clamps, saddles, holding arrangements to fix the mast to the building/structure at highest point such that the Air terminal is 5 meters above the tallest structure. \n | Item no-372 | 1 | No |
| 373 | 373 | Supply and installation of Down Conductor :\n25 x 3 mm GI strip connecting Air terminal to the earth pit including clamps, saddles, and necessary accessories .Estimated quantity will be as per site condition(40 mtr (approx.)\n\n\n | Item no-373 | 40 | Mtr |
| 374 | 374 | Supply and installation of Maintenance free Earthing; \nThe earthing will be maintenance free chemical earthing using copper bonded steel rod ( 16 mm dia , 2.4 mtr long) and using ground enhancing, artificial soil treatment chemical compound, TEREC+ & Earthcon , having essential chemical ingredients, such as ‘ionic chemicals, dispersion chemicals, expansion chemicals, diffusion chemicals and hygroscopic chemicals, to provide stable low resistance in the earth terminal to make it maintenance free as per IEEE 80-2000 14.5d clause.\n\n | Item no-374 | 1 | Nos |
| 375 | 375 | Add 12 % G S T | Item no-375 | 1 | LS |
| 376 | 376 | Add 1% labour welfare cess | Item no-376 | 1 | LS |
AI Tender Summary
Tender Timeline
Dec 18, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJan 22, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 25, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender