Construction Work Of C . D . P . O . Office Building At Weir
Tender Value
38.72 Lakhs
Estimated cost
Bid Submission
01 Jan 2021
0 days left
EMD
38720
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bayana → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Work Of C . D . P . O . Office Building At Weir
BOQ
| Name of Work: Construction Work of C.D.P.O. OFFICE BUILDING AT WEIR | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Item Description | Item 1 | ||
| 2 | 1.01 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soil. | Item 2 | 198.91 | Cum |
| 3 | 1.02 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. | Item 3 | 139.24 | Cum |
| 4 | 1.03 | Filling in plinth with locally available river shingle/good earth under floors including watering ramming consolidating and dressing complete including cost of. (b) Locally available good earth | Item 4 | 103.5 | Cum |
| 5 | 1.04 | Providing and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRECONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment). | Item 5 | 169.94 | Sqm |
| 6 | 1.05 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | Item 6 | 44.64 | Cum |
| 7 | 1.06 | Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). | Item 7 | 70.24 | Cum |
| 8 | 1.07 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc. up to plinth level. | Item 8 | 210.87 | Sqm |
| 9 | 1.08 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Providing M-25 grade R.C.C. instead of M-20 grade R.C.C. | Item 9 | 47.25 | Cum |
| 10 | 1.09 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Thermo-mechanically Treated bars (Conforming of relevent IS code) | Item 10 | 9070 | Kg |
| 11 | 1.1 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for : Columns, pillars, posts and struts etc. | Item 11 | 155.2 | Sqm |
| 12 | 1.11 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for : Beams, Slabs, Lintels, Chajjas, Stairs | Item 12 | 458.2 | Sqm |
| 13 | 1.12 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints exc. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. Providing M-25 grade R.C.C. instead of M-20 grade R.C.C. | Item 13 | 14.18 | Cum |
| 14 | 1.13 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints exc. Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases. Providing M-25 grade R.C.C. instead of M-20 grade R.C.C. | Item 14 | 56.2 | Cum |
| 15 | 1.14 | Brick masonry in foundation and plinth with bricks of class designation 75 in : Cement mortar 1 : 6 (1 cement : 6 coarse sand). Add extra over item No.5.1 for brick work in super structure upto third storey. | Item 15 | 94.2 | Cum |
| 16 | 1.15 | Random rubble dry stone Kharanja under floor. | Item 16 | 26.94 | Cum |
| 17 | 1.16 | Ground Floor : Polished Blue Kota Stone flooring skirting, laid over 20mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab from 901 to 2000 Sq.Cm : (a) 25mm thick slab. | Item 17 | 130.1 | Sqm |
| 18 | 1.17 | P & F Vitrified Porcelain Polished tiles ( Naveen/ Euro make , size 600 mm x 600 mm and thickness 10mm) on floor, skirting and steps etc. laid with tile admixture (Roff Pidilite or equivalent) including filling of joints by water proofing tile grout (Fevimate, Roofie, Untile or equivalent) specially for adhesive with graded granuals, polymer and stable pigment fine finished including cleaning of joints etc. complete as per direction of Engineer Incharge. Conforming to IS 15622 of approved make in all colour and shade, | Item 18 | 72.62 | Sqm |
| 19 | 1.18 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). Catagory A, Kajaria, Somani, Jhonson make | Item 19 | 7.09 | Sqm |
| 20 | 1.19 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Catagory A, Kajaria, Somani, Jhonson make | Item 20 | 31.4 | Sqm |
| 21 | 1.2 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. | Item 21 | 25.84 | Sqm |
| 22 | 1.21 | Providing and fixing Square bars or other flat welded to window, ventilatiors etc. | Item 22 | 222 | Kg. |
| 23 | 1.22 | Providing and fixing pressed steel mitred door frames manufactured from commercial mild steel sheet of 1.25mm (16 gauge) thickness including hinges jamb, lock jamb, head and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with C.C 1:2:4( M-15 Grade)complete in all respect as directed by Engineerin-charge: Profile C | Item 23 | 15.09 | Rmt |
| 24 | 1.23 | Providing and fixing external grade board solid core double leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' :. Commercial Veneer both side -35 mm thick. | Item 24 | 21.92 | Sqm |
| 25 | 1.24 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20mm thick. | Item 25 | 1057.83 | sqm |
| 26 | 1.25 | 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) | Item 26 | 218.93 | Sqm |
| 27 | 1.26 | Applying Birla / JK white cement based putty over cement plaster surface for making even surface. | Item 27 | 1276.76 | Sqm |
| 28 | 1.27 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding : New work (two or more coats) over and including scrapping and priming coat with cement primer | Item 28 | 841.05 | Sqm |
| 29 | 1.28 | Painting with enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | Item 29 | 104.36 | Sqm |
| 30 | 1.29 | Making grooves as per design in plaster 10mm to 20mm wide. Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design | Item 30 | 80.79 | Rmt |
| 31 | 1.3 | Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. | Item 31 | 600 | Kg |
| 32 | 1.31 | Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification. | Item 32 | 73.88 | Sqm |
| 33 | 1.32 | Providing Cement based water proofing treatment to RCC Roof with brick bats 25 mm to 100 mm in CM 1:4 (1-Cement : 4-Sand) the under layer being 20mm thick bed plaster of cement sand mortar 1:6 with neat cement punning @ 3 Kg/sqm including cleaning of RCC surface and adding of water proofing compound at all stages at 2% of weight of cement including curing etc. complete in all respect finishing with 20mm thick cement sand mortar of mix 1:4 mixed with water proofing compound. | Item 33 | 19.1 | Cum |
| 34 | 1.33 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding : New work (Three or more coats) | Item 34 | 435.71 | Sqm |
| 35 | 1.34 | Providing batta (gola) 75mm x 75mm in cement concrete (1 : 2 : 4) including finishing with cement mortar 1 : 3 as per standard design. | Item 35 | 250.93 | Sqm |
| 36 | 1.35 | Half brick masonry in superstructure upto three storey using bricks of designation 75 in cement mortar 1:4 (1 cement: 4 coarse sand) Add extra for half brick masonry in super structure upto third story including cost of norminal hoop reinforcement (2 Nos. ,6mm Ø M.S. bar at every fourth course) . | Item 36 | 52.97 | Sqm |
| 37 | 1.36 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). With 75mm opening when closed | Item 37 | 8.95 | Sqm |
| 38 | 1.37 | Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :Sand or other approved stone 25 to 30mm thick. | Item 38 | 33.46 | Sqm |
| 39 | 1.38 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand)Dark shade pigment using ordinary cement. | Item 39 | 13.94 | Sqm |
| 40 | 1.39 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Green / BlackAbove 3601 Cm2 Slabs | Item 40 | 2.6 | Sqm |
| 41 | 1.4 | Supply & fixing of steel window made out 75x40 mm hollow metal pressed section of 16 gauge thick sheet partly openable and partly fixed panel shutter with 5 mm thick plain glass panes outside openable and wire gauge 14x24 gauge inside openable shutter with M.S. square bar 10 mm side, fixed, portion of window should be glazed by 5 mm thick plain glass of TG welded to M.S. frame and approved make putty with glazing clips inching joints mitred and plug welded with suitable hinges hold fast steel lug and screws with approved oxidized steel handles fittings peg stays etc. complete in all respect including providing 10 mm square MS bars 15 cm. center to cernter and applying priming coat of red oxide paints as per approved drawing by Engineer's incharge ground floor/ first floor. | Item 41 | 25.84 | Sqm |
| 42 | 1.41 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete:20 mm | Item 42 | 30.49 | Mtr |
| 43 | 1.42 | Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, using brick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. | Item 43 | 6.45 | Sqm |
| 44 | 1.43 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate. | Item 44 | 86.2 | Sqm |
| 45 | 1.44 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 Mtr. and lift up to 1.5 Mtr.: For all kind of soil | Item 45 | 100 | p100sqm |
| 46 | 1.45 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) | Item 46 | 100 | Kg |
| 47 | 1.46 | Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Prelaminated particle board with decorative lamination on both sides. | Item 47 | 24 | Sqm |
| 48 | 1.47 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.)With glass panes of 5.0 mm thickness ( weight not less than 13.75 kg/sqm) | Item 48 | 24 | Sqm |
| 49 | 1.48 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate | Item 49 | 2 | Each |
| 50 | 1.49 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | Item 50 | 2 | Each |
| 51 | 1.5 | PART-B SANITARY | Item 51 | ||
| 52 | 1.51 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 530x410mm. | Item 52 | 1 | Each |
| 53 | 1.52 | P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS :2556 Mark) with P or S trap including cutting and making good the wall and floor | Item 53 | 1 | Each |
| 54 | 1.53 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall:PVC with PVC bend of make Commander champion | Item 54 | 2 | Each |
| 55 | 1.54 | P & F water closet Seat Covers with brass hinges complete : Solid PVC (ISI marked) grade-I white | Item 55 | 1 | Each |
| 56 | 1.55 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. | Item 56 | 1 | Each |
| 57 | 1.56 | P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 550 mm x 400 mm | Item 57 | 2 | Each |
| 58 | 1.57 | P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make (Atul, Modi Guard, Saint Gobin or equivalent) complete with 6mm thick commercial ply base fixed to wooden screws & washers.Size 600 x 450mm x 4 mm thick | Item 58 | 2 | Each |
| 59 | 1.58 | P & F Towel Rail or Ring of approved quality/make:C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty). | Item 59 | 2 | Each |
| 60 | 1.59 | P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. | Item 60 | 2 | Each |
| 61 | 1.6 | P & F Grating of approved quality/make:Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make | Item 61 | 2 | Each |
| 62 | 1.61 | Providing and fixing Polyethylene - Aluminimum - Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply with all compression type composite internal seal fittings (e.g. elbows, tees, reducers, couplers connectors etc.) including trenching & refilling the same etc. (External work) | Item 62 | ||
| 63 | 1.62 | 1216 (16mm OD) pipe | Item 63 | 10 | Rmt |
| 64 | 1.63 | 2025 (25mm OD) pipe | Item 64 | 10 | Rmt |
| 65 | 1.64 | Providing and fixing Polyethylene - Aluminimum - Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply with all compression type composite internal seal fittings (e.g. elbows, tees, reducers, couplers connectors etc.) including cutting chases on walls & making (Internal work) Concealed installation including cutting chases and making good the walls etc. complete. | Item 65 | ||
| 66 | 1.65 | 1216 (16mm OD) pipe | Item 66 | 10 | Rmt |
| 67 | 1.66 | 2025 (25mm OD) pipe | Item 67 | 10 | Rmt |
| 68 | 1.67 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. | Item 68 | ||
| 69 | 1.68 | 15mm dia nominal bore B class | Item 69 | 10 | Rmt |
| 70 | 1.69 | 25mm dia nominal bore B class | Item 70 | 10 | Rmt |
| 71 | 1.7 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. Brass bib cock,15mm nominal bore. | Item 71 | 2 | Each |
| 72 | 1.71 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (Large) or half stall size 610x400x80 | Item 72 | 2 | Each |
| 73 | 1.72 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) For WC of approved quality make. CP brass push type concealed 25mm nominal bore. | Item 73 | 2 | Each |
| 74 | 1.73 | P & F W.V.C. (IS: 2556 Mark) Squatting Urinal of standard make complete. Including cutting & making good the floor: | Item 74 | 2 | Each |
| 75 | 1.74 | P & F Ball Cock (IS : 1703 Mark) with Rod & P.V.C. Ball complete : Brass wt 750 gm, 20mm | Item 75 | 2 | Each |
| 76 | 1.75 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.C.P. Inlet connection 15mm.Brass (IS : 8931 marked) | Item 76 | 4 | Each |
| 77 | 1.76 | P & F 15mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length 300mm | Item 77 | 4 | Each |
| 78 | 1.77 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : | Item 78 | ||
| 79 | 1.78 | Gun-metal 15mm nominal bore. | Item 79 | 2 | Each |
| 80 | 1.79 | Gun-metal 25mm nominal bore. | Item 80 | 2 | Each |
| 81 | 1.8 | P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm.Makrana II quality marble having light spots | Item 81 | 2 | Each |
| 82 | 1.81 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved desig | Item 82 | ||
| 83 | 1.82 | 500 Lt Capacity | Item 83 | 1 | Each |
| 84 | 1.83 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110mm dia | Item 84 | 20 | Rmt |
| 85 | 1.84 | P & F rigid pvc pipe fittings (IS : 4985 mark) of approved quality / make including joining the pipe with solvent cement rubber ring and lubricant : | Item 85 | ||
| 86 | 1.85 | Coupler (Socket) | Item 86 | 4 | Each |
| 87 | 1.86 | Plain Tee | Item 87 | 8 | Each |
| 88 | 1.87 | Bend 87.5 | Item 88 | 15 | Each |
| 89 | 1.88 | Pipe Clip | Item 89 | 15 | Each |
| 90 | 1.89 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M | Item 90 | 2 | Each |
| 91 | 1.9 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 450 x 450mm depth upto 0.5 M Cement cover with frame | Item 91 | 2 | Each |
| 92 | 1.91 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.:Size 300 Cm. dia outside & 300 Cm. depth . | Item 92 | 1 | Each |
| 93 | 1.92 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 400 x140x150 cm.(for 50 users) | Item 93 | 1 | Each |
| 94 | 1.93 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make | Item 94 | ||
| 95 | 1.94 | 75 mm dia | Item 95 | 25 | Rmt |
| 96 | 1.95 | 110 mm dia | Item 96 | 150 | Rmt |
AI Tender Summary
Tender Timeline
Dec 18, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJan 01, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 05, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender