Repair And Maint Of Ceiling Roofing Sunken Flooring Etc In Bde Hq Rgh Mes Ib Arty Mess And Other Location At Mili Station Raiwala
Tender Overview
Project Description
Repair And Maint Of Ceiling Roofing Sunken Flooring Etc In Bde Hq Rgh Mes Ib Arty Mess And Other Location At Mili Station Raiwala
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Jan-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-Jan-2021 |
BOQ
| Name of Work: Repair and maint of ceiling , roofing, sunken flooring etc in Bde HQ ,RGH,MES IB,Arty Mess and other location at Mili Stn Raiwala. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 CM thickness (below or above ground level) complete all as specified and directed. | 23.75 | Cum | |
| 2 | 2 | M&L for cleaning and filling cracks with sealing compound, brushing neat with neat cement slurry @ 3.00 kg/ sqm and grouting in 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) over suncken slab portion and finishing the top surfaces even and smooth without using extra cement .\n(b) M&L for two coats of acrylic cementitious water proofing coating (Dr Fixit pidifin 2K manufactured by M/s Pidilite industries Ltd or equivalent make as approved by GE/AGE(I) and followed by a overlay protective 15 mm thick screed/ rendering in CM 1:4 along with liquid water proofing at appropriate ratio of approved make on top surfaces of sunken slab after preparations as mentioned above. Method of application for acrylic cementitious water proofing coating is followed as per manufacturers instructions. | 15 | Sqm | |
| 3 | 3 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in benching of roof etc rounded or chamfered on edges. | 0.15 | Cum | |
| 4 | 4 | S&F in repair glazing (5.00 mm thick float glass) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket and aluminium snap beading etc. complete all as direted by engineer-in-charge . \n(Note : - Cost of aluminium snap beading and EPDM rubber/ neoprene gasket shall be paid and measured seperately) | 10 | Sqm | |
| 5 | 5 | Supply only anodised aluminium snap beading. | 4 | RM | |
| 6 | 6 | Supply only EPDM rubber/ neoprene gasket. | 4 | RM | |
| 7 | 7 | Taking down Chowkats exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) | 2 | Each | |
| 8 | 8 | Dismantling boarding any description fixed with screws and fixed in any position. | 5 | Sqm | |
| 9 | 9 | S&F powder coated aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc , complete all a specified and directed. | 25 | Kg | |
| 10 | 10 | S&F powder coated aluminium anodised Door shutters, aluminium sections weighing 0.65 kg/m including necessary joining, cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, tower bolt, snap beading, screws etc, complete all as specified and directed. Note: Stainless steel wire mesh/ 5 mm thick retro-reflected glass shall be measured and paid seperately under supply only. | 10 | Sqm | |
| 11 | 11 | S&F powder coated aluminium anodised partition/ window / ventilators , fixed type without sashbars, aluminium section weighing 0.65 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc, complete all as specified and directed. | 5 | Sqm | |
| 12 | 12 | Supply only Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks over aluminium door and window, complete all as specified and directed. | 6 | Sqm | |
| 13 | 13 | Supply only 5 mm thick retro-reflected/ tinted glass glass, fixed over aluminium door and window with snap beading complete all as specified and directed. | 10 | Sqm | |
| 14 | 14 | S&F in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed. | 5 | Each | |
| 15 | 15 | Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises. | 22 | Sqm | |
| 16 | 16 | M&L for 15 mm thick rendering in CM 1:4 for receiving tiles as in backing all as specified. | 22 | Sqm | |
| 17 | 17 | M&L for screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6.all as specified. | 15 | Sqm | |
| 18 | 18 | M&L for Glazed ceramic tiles coloured size of size 350x250x7 mm/ 450x350x7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match complete all as specified and directed. | 22 | Sqm | |
| 19 | 19 | M&L for non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. | 15 | Sqm | |
| 20 | 20 | Taking up or down steel tubing connecting including checking for refixing or removal to stove 15 mm dia bore. | 20 | RM | |
| 21 | 21 | All as per above but 20 mm dia bore. | 8 | RM | |
| 22 | 22 | Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed. | 50 | RM | |
| 23 | 23 | Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed. | 30 | RM | |
| 24 | 24 | Cutting chases for concealed water tubing and making good in CM 1:3 on brick wall cutting n.exc 10 Cm in girth al as directed. | 8 | RM | |
| 25 | 25 | S&F in repair stop valve cast copper alloy screwed down high pressure with crush butterfly handle 20 mm bore screwed both end fixed for iron pipe as specified. | 2 | Each | |
| 26 | 26 | S&F in repair vitreous China wash down (EWC) water closet pan(pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including seat and cover for pedestal pattern complete all as specfied and directed. | 5 | Each | |
| 27 | 27 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc. complete all as specified and directed. | 5 | Each | |
| 28 | 28 | S & F in repair for Wash Hand basins, Vitreous China, white, flat back, size 550x400mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed. | 5 | Each | |
| 29 | 29 | Supply only 32 mm dia waste fittings, brass chromium plated for Glazedware sink, WHB, etc with long screwed shanks and flynuts, flange embedded in red lead cement and other end fixed complete all as specified and directed. | 10 | Each | |
| 30 | 30 | S&F in repair 15 mm dia bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down with wall flange, screwed down to GI pipes or for brass ferule or to GI socket complete all as specified and directed. | 10 | Each | |
| 31 | 31 | S&F in repair 15 mm dia bib taps, long body, fancy type, cast copper alloy with crutch or butterfly handle, screwed down with wall flange, screwed down to GI pipes or for brass ferule or to GI socket complete all as specified and directed. | 10 | Each | |
| 32 | 32 | S & F in repair 15 mm dia chromium plated brass Wall mixer (Qtr Turn ) with provision for over head shower with 115 mm long bend pipe, on upper side, connecting legs & wall flange complete all as specified and directed. Make: Jaquar (Florentine) Cat Part No. FLR 5273 UPR or equivalent make as approved. | 10 | Each | |
| 33 | 33 | S & F in repair 15 mm dia chromium plated brass centre hole basin mixer (Qtr Turn) with regular spout without popup waste system with 450 mm long braided hoses, 20 mm cartridge complete all as specified and directed. Make : Jaquar (Florentine) Cat Part No. FLR 5167NB or equivalent make as approved. | 7 | Each | |
| 34 | 34 | S&Fin repair CP brass jet for EWC all as specified. | 10 | Each | |
| 35 | 35 | S&F in repair chromium plated health fauset, telephonic type with CP flexible arms of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed. Make : Jaquar Cat Part No. 573 or equivalent. | 15 | Each | |
| 36 | 36 | Supply & Fixing PTMT 45 cm long (PVC connection) 15 mm bore size. | 20 | Each | |
| 37 | 37 | S&F 15 mm dia chromium plated brass angular stop cock ( Full Turn) with wall fange complete all as specified and directed. Make : Jaquar (continetal) Cat Part No. CON 059KN or equivalent model as specified. | 5 | Each | |
| 38 | 38 | S&F angular cock, (2 in 1),15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. | 5 | Each | |
| 39 | 39 | S&F in repair CP shower rose with or without swivel joints including 125 mm long shower arm/bend complete all as specified and directed . | 2 | Each | |
| 40 | 40 | S & F in repair soap dish, brass, chromium plated,75 mm size fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. | 5 | Each | |
| 41 | 41 | S & F in repair toilet paper holder with flap recessed type (Stainless Steel), fixed to wall with stainless steel screws and rawl plugs complete all as specified and directed. Make : Jaquar (Hotelier) Cat Part No. AHS 1553 or equivalent model as specified. | 5 | Each | |
| 42 | 42 | S & F in repair 20 mm dia brass chromium plated tubular towel rail 'D' type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed. | 5 | Each | |
| 43 | 43 | Supply only PVC waste pipe flexible type 32 mm dia and 600 mm long for wash basins and sink complete all as specified and directed . | 5 | Each | |
| 44 | 44 | S&F in repair 600 x 450 mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers | 10 | Each | |
| 45 | 45 | Demolition and breaking up drain pipes of 100/75 mm bore (salt glazed stoneware, AC or reinforced concrete) set in cement mortar complete all as specified and directed. | 20 | RM | |
| 46 | 46 | S & F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in floors, complete all as specified and directed. | 3 | RM | |
| 47 | 47 | S & F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. | 9 | RM | |
| 48 | 48 | S & F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. | 2 | Each | |
| 49 | 49 | S & F of 110 mm bore PVC (SWR) reducers complete all as specified and directed. | 2 | Each | |
| 50 | 50 | S & F of 110 mm bore PVC (SWR) couplers complete all as specified and directed. | 1 | Each | |
| 51 | 51 | S & F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. | 6 | RM | |
| 52 | 52 | S & F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. | 1.5 | RM | |
| 53 | 53 | S & F of 75 mm bore PVC (SWR) bend any radius complete all as specified and directed. | 4 | Each | |
| 54 | 54 | S & F of 75 mm bore PVC (SWR) junction Single, (Single ‘T’) equal or unequal complete all as specified and directed | 2 | Each | |
| 55 | 55 | S & F of 110 mm bore PVC (SWR) junction Single, (Single ‘T’) equal or unequal complete all as specified and directed | 1 | Each | |
| 56 | 56 | S & F of 75 mm dia PVC (SWR) Plain floor trap, with grating including jointing with solvent cement complete all as specified and directed. | 4 | Each | |
| 57 | 57 | S & F of 110 mm dia PVC (SWR) Branch piece double equal or unequal,complete all as specified and directed. | 2 | Each | |
| 58 | 58 | S & F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 75 mm bore CI pipe/PVC pipe.\n | 5 | Each | |
| 59 | 59 | S & F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 100 mm bore CI pipe/PVC pipe.\n | 6 | Each | |
| 60 | 60 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone agg) as in roof padding to receive roof treatment complete all as specified and directed. | 960 | Sqm | |
| 61 | 61 | M&L for cleaning of roof slab including picking, sweeping clean and washing down with water to remove dust, dirt etc and providing roof treatment complete all as described in the following process after the surface is completely dried : - | 960 | Sqm | |
| 62 | 62 | (b) M&L for applying evenly one coat of polymeric modified bituminious primer @ 0.30Kg/Sqm all as specified. | |||
| 63 | 63 | (c) M&L for providing APP based 5 layer polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application as per manufactur's instruction and shall be applied by authorised person of the company complete all as specified and directed. | |||
| 64 | 64 | (d) M&L applyling a coat of polymeric modified bitumen 85/25 @ 1.20 Kg/Sqm and finishing the top surface by two coat of alluminium paints@ 0.10 Kg/Sqm. | |||
| 65 | 65 | (e) M&L for carrying out test by filling of water for conteneous 48 hours and providing plaster template of size 450x450mm,10mm thick in CM 1:4 and engraving CA No/Firm name/date all as specified and directed. |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender