Directorate Of Fisheries has published Construction Of Rcc Aqua Tank For Fishing Activities In The Newly Constructed Minister Banglow At Shyama Prasad Mukharjee Lane , Agartala. Submission Date for this Tender is 29-12-2020. Water Tank Tenders in Agartala Tripura. Bidders can get complete Tender details and download the document.
| Name of Work: Construction of RCC aqua tank for fishing activities in the newly constructed Minister Banglow at Shyama Prasad Mukharjee Lane, Agartala. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Item Description | |||
| 2 | 1.01 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil | 2.13 | 83.25 | cum |
| 3 | 1.02 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. | 2.19 | 9.45 | cum |
| 4 | 1.03 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level: 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size) | 4.1.7 | 7.087 | cum |
| 5 | 1.04 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- -All work upto plinth level: 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) | 5.1.3 | 7.087 | cum |
| 6 | 1.05 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- In plinth and skirting courses, fillets, columns, pillars, posts and struts -1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) | 5.2.2 | 12.585 | cum |
| 7 | 1.06 | Centering shuttering including struttings, propping etc. and removal of form work for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply | 5.8.3 | 128 | sqm |
| 8 | 1.07 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more | 5.19.4 | 2163.92 | Kg |
| 9 | 1.08 | 6 mm cement plaster in single layer finished with a floating coat of neat cement, curing and a thick coat of lime wash on top when dry on wall bearings for RCC slabs and beams complete. Cement mortar 1:3 (1 cement : 3 fine sand) | 12.6.1 | 130.43 | Sqm |
| 10 | 1.09 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | 16.1.1.1 | 285.5 | kg |
| 11 | 1.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 100 mm nominal inner dia .Pipes. | 19.9.9 | 12 | Metre |
| 12 | 1.11 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling etc. complete as per CPWD specification and direction of the Engineer - in - charge. 50 mm dia. nominal bore | 19.12.6 | 6 | Metre |
| 13 | 1.12 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 50 mm nominal bore | 19.17.4 | 2 | no. |
| 14 | 1.13 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 80 mm nominal bore | 19.17.6 | 2 | no. |
| 15 | 1.14 | Providing and fixing chequered terrazo tiles 22 mm thick with graded marble chips of size upto 6 mm, laid on floors, footpath & courtyard on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete. 10.25.1 Light shade pigment using white cement | 10.25.1 | 37.4 | sqm |
| 16 | 1.15 | Providing including Installation of 1(one) HP water pump (ISI mark) including suction & delivery pipe complete as per direction of the Engg-in-charge like Crompton greaves /Mano set etc. | Dept approved rate | 1 | No. |
| 17 | 1.16 | Drilling & boring pilot hole in any soil strata by manual means, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of sample in polythene bags/sample boxes and disposal of excess soil or mud, including the cost for water etc. as required to maintain the pilot hole properly as per specification and direction of the Engg-in-charge. | Dept. approved rate | 70 | Metre |
| 18 | 1.17 | Reaming of pilot hole to an enlarge bore hole in any soil strata by manual means, disposal of excess soil or mud, including the cost for water etc. as required to maintain the bore hole properly as per specification and direction of the Engg-in-charge. | Dept . approved rate | 70.0181 | Metre |
| 19 | 1.18 | Providing & lowering of UPVC pipe as per Is: 12818 after washing of the bore hole by manual as per specification and direction of the Engg-in-charge. CM casting pipe: 110/100mm | Dept.. approved rate | 40 | Metre |
| 20 | 1.19 | Providing & lowering of UPVC pipe as per Is: 12818 after washing of the bore hole by manual as per specification and direction of the Engg-in-charge. RS pipe: 110/100mm | Dept .. approved rate | 30 | Metre |
| 21 | 1.2 | Providing & fixing of UPVC end cap suitable for UPVC “CM” casing or “CS” casing or “RS” pipes as per specification and direction of the Engg-in-charge. | Dept. approved rate. | 1 | No. |
| 22 | 1.21 | Providing & fixing of UPVC reducer suitable for UPVC “CM” casing or “CS” casting or “RS” pipe as per specification and direction of the Engg-in-charge. | Dept. approved rate.. | 1 | No. |
| 23 | 1.22 | Providing & shrouding of the mini deep tube well assemble with washed pea gravels (2.00-4.75 mm effective size) as per specification and direction of the Engg-in-charge. Pea gravels obtained from Durgapur West Bengal. | Dept approved rate. | 2.72 | Cum |
| 24 | 1.23 | Washing and development of tube well by using air compressor (diesel operated) and testing of the well as per specification and direction of the Engg-in-charge. 1 job | Dept approved rate.. | 1 | Job |
| 25 | 1.24 | Supplying and installation of water lubricated submersible pump having ISI market of capacity 2000 GPH at total head upto 60 mtr. Couple with submersible motor 3HP suitable for 240 Voltas (+10% variation single phase 50 HP. AC supply DOL starting method to run at 2880 RPM along with 35 mtr. 205 sqm. PVC insulated 3(three) core flate copper cables including fitting, fixing and lowering if with 40 mm dia G.I pipe up to 100 Ft.(30.00 mtr.)etc. complete as per direction of the Engg-in-charge(40mm dia G.I pipe and fitting will be paid separately). 1 job | Dept approved rate . | 1 | Job |
| 26 | 1.25 | Supplying and fitting fixing of 110 mm dia well plug of approved quality. | Dept approved rate .. | 1 | No |
| 27 | 1.26 | Providing & fitting, fixing GI bend/elbow in the pipe including testing of joints complete as per CPWD specification:15 mm dia | Deptt. approved rate. | 2 | Nos. |
| 28 | 1.27 | Supplying of 40 mm dia G.I pipe(medium class) as per IS: 1239 with latest amendment complete with G.I fitting including trenching and refilling, cutting and making good the wals etc. complete chapter 20 of CPWD specification and direction of the Engg-in-charge. | Deptt . approved rate. | 82 | Mtr |
| 29 | 1.28 | Providing & fixing G.I reducer with the pipe line including testing of joints complete as per CPWD specification and direction of the Engg-in-charge.40x250 mm dia | Deptt.. approved rate. | 4 | Nos. |
| 30 | 1.29 | Providing & fixing G.I union as per CPWD specification and direction of the Engg-in-charge . 15 mm dia | Deptt .. approved rate. | 5 | Nos. |
| 31 | 1.3 | Supplying and fitting fixing of MS box of having size 60 cmx45cm with slope roof and front shutter with locking arrangement fitted with 4 nos. 40mmx40mmx6mm MS angle of 1.60 m long including providing & fitting wooden board inside the box having size 55cmx55cm thick for fitting all the electrical features like starter, main swatch and including cost of necessary painting & embedding the box with CC block size 30cmx30cmx60cm with 1:2:4 (1 cement:2R/sand/4 jharma brick aggregate 20 mm gauge) as per direction of the Engg-in-charge(starter, main switch will be paid separately) : 1 Job | Dept.. approved rate.. | 1 | Job |
| 32 | 1.31 | Supplying & fitting, fixing of single phase motor starter panel unit 3.0 HP capacity comprising with 2 pole conductor, over lead relay, capacitor, volts meter of BCH/L & T make with necessary copper wire etc. complete as per direction of the Engg-in-charge. | Dept.. approved rate .. | 1 | No. |
| 33 | 1.32 | Supplying & fitting, fixing of Amps single phase main switch of BCH/L & T/ Havel’s make with necessary copper wire wiring etc. complete as per direction of the Engg-in-charge.: 1 Job | Deptt .. approved rate .. | 1 | Job |
| 34 | 1.33 | Providing & installation of blower or flash type aerator for the water tank complete as per direction of E-in-Charge | Market rate | 1 | Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
