Water Resources and Irrigation Government Departments Closing in 0 days TDR #26294323

Nhp Renovation And Construction Of Hydrology Construction And Maintenance Level Ii Laboratory Building At Dharamshala Dhagwar Under Hydrology Sub Division Palampur Distt . Kangra Hp

Issued by Government Departments · Shimla, Himachal Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Dec 2020
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Nhp Renovation And Construction Of Hydrology Construction And Maintenance Level Ii Laboratory Building At Dharamshala Dhagwar Under Hydrology Sub Division Palampur Distt . Kangra Hp , Civil Works , Excavation In Foundation Trenches Etc . In Earth Work . , Providing & Laying Cement Concrete 1:4:8 ( 1 Cement : 4 Sand :8 Graded Stone Aggregate 40 Mm Nominal Size ) And Curing Complete Excluding Cost Of Centring & Shuttering Infoundation & Plinth . , Random Rubble Masonry Coursed With Hard Stone Of Approved Quality In Foundation And Plinth In R . Walls / B . Wallsi / C Raking Out Joints In :Laid Dry . , Boulder Filling Dry Hand Packed Tightly Under Floors , Providing & Laying Cement Concrete 1:5:10 ( 1 Cement : 5 Sand 10 Graded Stone Aggregate 40 Mm Nominal Size ) And Curing Complete Excluding Cost Of Centring & Shuttering Infoundation & Plinth . , Brick Work Using Common Burnt Clay Building Bricks Super-Structure Above Plinth Level Upto Floor Two Level ( First Class Bricks ) . Cement Mortar 1:6 ( 1 Cement : 6 Sand ) First Class Bricks , Half Brick Masonry In Common Burnt Clay Building Bricks In :-Cement Mortar 1:4 ( 1 Cement : 4 Sand ) First Class Bricks Including All Leads And Lifts , Providing Form Work With Steel Plates 3 . 15Mm . Thick Welded With Angle Iron In Frame 30X30x5mm . So As To Give A Fair Finish Including Centring , Shuutering , Strutting And Propping Etc . With Wooden Battens And Ballies , Height Of Propping And Centring Below Supporting Floor To Ceiling Not Exceeding 4 Mtrs . And Removal Of The Same For Insitu-Reinforced Concrete & Plain Concrete Work In: ( A , Foundations , Footings , Basis Of Columns Etc . And Mass Concrete . , Columns , Pillars . Posts And Struts . , ) Flat Surfaces Such As Soffitsof Suspended Floors , Roofs , Landings And The Like . , Beams , Cantilever , Girders And Lintels . Sides And Soffits Of Beams , Beam Haunchings , Cantilevers , Bressumers And Lintels Not Exceeding 1 Mtr . In Depth In All Heights From Floor . , Staircase Sloping Surfaces , Providing & Laying Cement Concrete Work 1:11 / 2: 3 ( 1 Cement : 11 / 2 Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) And Curing Complete Excluding Cost Of Form Work And Reinforcement For Reinforced Concrete Work In:- , Providing Mild Steel / Tor Steel Reinforcement For R . C . C . Work Including Bending , Binding And Placing In Position Complete Upto Floor Two Level :Tor Steel , Providing And Fixing Pressed Steel Doors Frames Manufactured From Commercial Mild Steel Sheet Of 1 . 25Mm Thickness Including Hinges Jumb Lock Jamb , Beed And If Reuired Angle Threshold Of Mild Steel Angle Of Section 50X25 Mm , Ii ) Glazing In Aluminium Door , Window , Ventilator Shutters And Partition Etc With Pvc / Neoprens Gasket Etc . Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item . ) Glazing With Glass Panes Of 5 . 50Mm Thickness ( Weight Not Less Than 13 . 75 Kg / Sqm ) , Providing And Fixing Wire Gauge Shutters Using Galvanised M . S . Wire Gauge Of I . S . Gauge Designation 85 G . With Wire Of Dia 0 . 56 Mm For Doors Windows And Clerestorey Windows Including Bright Finished Black Enamelled Iron Hinges With Necessary Screws . 30 Mm Thick Aluminium Framess , Providing And Fixing Of Action Tesa ( Medium Density Fiber Board ) Pre Laminated Wooden Cup Board Of Size 18 Mm . Anti Termite And Dampness Proof Including All Materials And Fittings Etc . In All Leads And Lifts As Per The Entire Satisfaction Of The Engineer - In - Charge . , Providing And Fixing 12Mm Thick 150Mm Wide Pelmet With 25 Mm Diametre Wooden Curtain Rods And Brackets Including Fixing 25X3mm M . S . Flat At 10 Cm . Long And Plugs Etc . Complete . , Providing And Fixing Brass Curtain Rail With Rollers Stop Ends And Brackets In Pelmets Instead Of Wooden Curtain Rod 25 Mm Dia And Brackets Of First Class Deodar Wood ( Actuallenght ) Of Rails Of Be Measured . , Providing And Fixing New Readymade Curtains In Doors And Windows Of Size 4*7 , 6Mm Cement Plaster To Ceiling In Cement Mortar 1:3 ( 1 Cement:3 Sand ) , 15Mm Cement Plaster In Single Coat On Fair Side Of Brick / Concrete / Stone Walls For Interior Plastering Upto Floor Two Level Including Arrises , Internal Rounded Angles , Chamfers And / Or Rounded Angles Not Exceeding 80Mm In Girth And Finished Even And Smooth . In Cment Mortar 1:6 Inlcuding All Leads And Lifts , Applying Birla White Wall Care Putty Over Plaster Surface After Thoroughly Brushing The Surface Free From Mortar Drops , Dust , Loose Materials And Other Foreign Matters Sand Papered Smooth To Give Final Matter Finish To The Surface Complete . , Applying One Coat Of Acrylic Primer ( Spectrum Or Equivalent Of Superior Quality ) On New Concrete / Masonry / Plastred Surfaces After And Including Preparing The Surface By Thoroughly Brushing The Surface Free From Mortar Droppings And Other Foreign Matters , Sand Papering The Surface Smooth Complete . , Wall Painting ( Two Coats ) With Acrylic Plastic Emulsion Paint Of Approved Brand & Manufactureon Undecorated Wall Surfaces To Give An Even Shade I / C Thoroughly Brushing The Surface . , Kota Stone Slab Flooring 20 Mm ( Average ) Thick Base Of Cement Mortor 1:4 ( 1 Cement :4 Sand ) Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab . Including Rubbing And Polishing Complete . 25 Mm Thick In All Leads And Lifts , Providing And Fixing 10 Mm Thick Anti Skid Water Proof Stain And Impect Resistent Heavy Duty Vetrified Tiles Nitco Or Equivlant 300 X 300X10 Mm Manufactured Of Approved Shade And Colour In Flooring , Tread Of Steps And Landings Laid Over 12Mm Thick Cement Mortor 1:3 ( 1Cement : 3 Sand ) Jointed With Cement Slurry Mixed With Pigment To Match The Shade Of Tiles As Required Complete . , White Glazed Tiles 6 Mm Thick In Flooring , Treads Of Steps And Landing Laid On A Bed Of 12 Mm Thick Cement Mortar 1:3 ( 1 Cement :3 Sand ) Finished With Flush Pointing In White Cement . , Providing And Laying Spartic Ceremic Tiles 5 . 5Mm . Thick In Flooring ( 300 X300mm . Size ) Treads Of Steps Laid On A Bed Of 12Mm . Thick Cement Mortar 1:3 ( 1Cement: 3 Sand ) Finished With Flush Pointing In White Cement . , Providing And Fixing Anodized Aluminium Sliding Door Bolt Anodized Colour And Shade With Bolts And Nuts Screws Etc . Complete . 2500X16mm , P / F Aluminium Handles Anodized Colour & Shade With Nuts & Bolts Screw Etc125 Mm . , P / F Aluminium Tower Bolts Anodized Colour & Shade With Nuts & Bolts Screw Etc . 150 X 10 Mm , Steel Work Welded In Built Up Section , Trusses And Framed Work , Including Cutting , Hoisting Fixing In Position And Applying A Priming Coat Of Red Lead Paint . , Providing And Fixing 0 . 60Mm Thick Prepainted Steel Sheet In Roofing With Hot Dipped Metallic Zinc Coated Sheet With Top Coat Of Regular Modified Polyster ( Rnp ) Organic Coating Of 20 Microns Over 5 Microns Primer Coating To Back Coat Of Polyster 5 Microns Primer Coating Icluding Fixing With Prepainted Iron J Or L Hooks , Bolts And Nuts 6Mm Diametre With Prepainted Limpet And Rubber Washers Complete With All Accesoriees As Required As Per The Direction Of Engineer-In-Charge . , Providing Ridges Or Hips 60 Cm Over All In Plain With Galvanised Iron G . I Sheet Fixed J Or L Hooks Bolts And Nuts 8Mm Dia G . I Limpet And Bitumen Washers Complete . . 63 Mm Thick Sheet . , Steel Work Welded In Built Up Section , Gratings , Framed Gaurds Etc . , I ) In Gratting , Framed Guard Bar , Ladders , Railing Brackets And Similar Works . , Providing And Fixing Ms Stair Case Comprising Of 150 Mm Ms Pipe 7 . 10 Mm Thick , Ms Angle 50X50x6 Mm , Chequered Plate 7 Mm Thick , Ms Black Pipe 40 Mm Dia , Ms Flat 40 X 5 Mm And Square Bars 12 Mm Including Cost Of Welding , Labour And Carriage Complete In All Respect In All Lead And Lift As Per Entire Satisfation

BOQ

NAME OF WORK:- NATIONAL HYDROLOGY PROJECT (S.H.:- RENOVATION & NEW CONSTRUCTION OF HYDROLOGY CONSTRUCTION & MAINTENANCE Level -II LABORATORY BUILDING AT DHARAMSHALA (DHAGWAR) UNDER HC&M SUB-DIVISION PALAMPUR DISTT. :- KANGRA HIMACHAL PRADESH.
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11CIVIL WORKS
21.01Excavation in foundation trenches etc. in earth work.7.31Cum
32Providing & laying cement concrete 1:4:8 (1 cement : 4 Sand :8 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of centring & shuttering infoundation & plinth.1.36Cum
43Random rubble masonry coursed with hard stone of approved quality in foundation and plinth in R.Walls/B.wallsI/c raking out joints in :Laid dry.8.1Cum
54Boulder filling dry hand packed tightly under floors1.35Cum
65Providing & laying cement concrete 1:5:10 (1 cement : 5 Sand 10 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of centring & shuttering infoundation & plinth.0.68Cum
76Brick work using common burnt clay building bricks Super-structure above plinth level upto floor two level (First Class Bricks).Cement Mortar 1:6 (1 Cement : 6 Sand) First Class Bricks33.81Cum
87Half brick masonry in common burnt clay building bricks in :-Cement Mortar 1:4 (1 cement : 4 sand) First Class Bricks including all leads and lifts41.34Sqm
98Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering,\nstrutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding\n4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:(A
108.01Foundations, Footings, basis of Columns etc. and mass concrete.1.8Sqm
118.02Columns, Pillars. Posts and Struts.6.17Sqm
128.03)Flat surfaces such as soffitsof suspended floors, roofs, landings and the like.53.87Sqm
138.04Beams, cantilever, girders and lintels.Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor.87.75Sqm
148.05Staircase sloping surfaces10.08Sqm
159Providing & Laying cement concrete work 1:11/2: 3 (1 cement : 11/2 sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-15.79Cum
1610Providing mild steel/Tor steel reinforcement for R.C.C. Work including bending, binding and placing in position complete upto floor two level :TOR Steel1265.34kg
1711Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jumb lock jamb,beed and if reuired angle threshold of mild steel angle of section 50X25 mm106.3rmt
1812ii) glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In-charge (cost of aluminium snap beading shall be paid in basic item.) Glazing with glass panes of 5.50mm thickness (weight not less than 13.75 kg/ sqm)31.17Sqm
1913Providing and fixing wire gauge shutters using galvanised M.S. Wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 30 mm thick aluminium framess23.18sqm
2014Providing and Fixing of Action Tesa (Medium Density Fiber Board) Pre Laminated wooden Cup Board of size 18 mm. anti termite and dampness proof including all materials and fittings etc. in all leads and lifts as per the entire satisfaction of the Engineer - in - Charge.12.78sqm
2115Providing and fixing 12mm thick 150mm wide pelmet with 25 mm diametre wooden curtain rods and brackets including fixing 25x3mm M.S. flat at 10 cm. Long and plugs etc. complete.19.8rmt
2216Providing and fixing brass curtain rail with rollers stop ends and brackets in pelmets instead of wooden curtain rod 25 mm dia and brackets of first class deodar wood (actuallenght) of rails of be measured.19.8rmt
2317Providing and fixing new readymade curtains in doors and windows of size 4*720no's
24186mm Cement plaster to ceiling In Cement mortar 1:3(1 Cement:3 Sand)46.9Sqm
251915mm cement plaster in single coat on fair side of\nbrick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. in cment mortar 1:6 inlcuding all leads and lifts366.96Sqm
2620Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete .413.86Sqm
2721Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete.413.86Sqm
2822Wall painting (two coats) with Acrylic plastic emulsion paint of approved brand & manufactureon undecorated wall surfaces to give an even shade i/c thoroughly brushing the surface.413.86Sqm
2923Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete. 25 mm thick in all leads and lifts9.3Sqm
3024Providing and fixing 10 mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles NITCO or equivlant 300 x 300x10 mm manufactured of approved shade and colour in flooring,tread of steps and landings laid over 12mm thick cement mortor 1:3 (1cement : 3 sand ) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.9.23Sqm
3125White glazed tiles 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3 sand) finished with flush pointing in white cement.12.63Sqm
3226Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement.86.01Sqm
3327Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts\nscrews etc. complete. 2500x16mm5nos.
3428P/F Aluminium handles anodized colour & shade with nuts & bolts screw etc125 mm.52nos.
3529P/F Aluminium tower bolts anodized colour & shade with nuts & bolts screw etc.150 X 10 mm76nos.
3630Steel work welded in built up section,trusses and framed work,including cutting,hoisting fixing in position and applying a priming coat of red lead paint.22.7Qtl.
3731Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster 5 microns primer coating icluding fixing with prepainted iron J or L hooks, bolts and nuts 6mm diametre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-In-Charge.244.006Sqm
3832Providing ridges or hips 60 cm over all in plain with galvanised iron G.I Sheet fixed J or L hooks bolts and nuts 8mm dia G.I Limpet and bitumen washers complete. .63 mm thick sheet.31.79Sqm
3933Steel work welded in built up section, gratings, framed gaurds etc.
4033.1i) In gratting, framed guard bar, ladders, railing brackets and similar works.13.47Qtl.
4134Providing and Fixing MS Stair Case comprising of 150 mm MS Pipe 7.10 mm thick, MS angle 50x50x6 mm, Chequered Plate 7 mm thick, MS Black Pipe 40 mm dia, MS Flat 40 x 5 mm and Square Bars 12 mm including cost of welding, labour and carriage complete in all respect in all lead and lift as per entire satisfation of Engineer in Charge.10step
4235Sanitary fittings:-
4335.01Providing and fixing to wall ceiling and floor galvanized mild steel tube , fitting and chamber making the good wall celing and floor Jindal make c class 20 mm nominal80Rmt
4436Providing and fixing G.I. Unions SPW make 20 mm nominal5Nos.
4537Provding PVC water storage tank of approved quality including fitting complete in all respect 1000 litres capacity in all leads and lifts Sintex make1Nos.
4638Construction of 300x300x500mm in size for stop cock with G.I. Surface box 100x100x5mm with hindges cover fixed in cement concrete slab 1:2:4( 1 cement:2 Sand:4 graded stone 20 mm nominal size) cement concrete 75 mm thick foundation concrete 1:5:10 1:2:4( 1 cement:5 Sand:10 graded stone 40mm nominal size) and its inside plastering with2Nos.
4739Providing and fixing sand cast /cast iron spun spigot and socked soil waste and ventilating pipe (joint to be measured and paid for separatly)
4839.0175mm dia25rmt
4939.02110mm dia125rmt
5040Provding and fixing MS hooks and clamps 50mm nominal size15Nos.
5141Providing and fixing sand cast iron/cast iron fittings and accessories plian bend 100mm nominal size4Nos.
5242Providing and fixing collar 100mm nominal size5Nos.
5343Providing and fixing cast iron cowl 100mm dia2Nos.
5444Providing leak caulked joint to sand cast iron and fitting i/c testing of the joint in all leads and lifts 50 mm dia
5544.01100 mm dia2Nos.
5645Providing and fixing cast iron/PVC floor trap of silt cleaning designed with sand cast iron screws down or hindges grating with cast vent iron including the cost of citting and making good the same 75mm nominal size1Nos.
5746Providing and fixing vitreous china water closet squleating pan W.C. Pan size 580mm (Earthwork,bed concrete, foortest and trap to measure and paid separatly)CERA, HINDWARE make white1Nos.
5847Providing and fixing 100mm size P or S trap foe water closet squattingh pan including jointing the trap with pan and soil pipe cement mortar 1:1( 1 cement: 1 Sand) CERA make1Nos.
5948Providing and fixing in Cement mortar 1:3(1 cement : 3 Mortar) a pair of vitreous china 250mmx130mmx50mm footrest for long pattern squatting pan and water closet1Nos.
6049Providing and fixing 10 litres vitreous china low level flushing cistern with a pair of CI brackets or mild steel brackets complete with fitting such as lead valve less syphon 15mm nominal size brass ball valve with ploythene float , CP, Brass handle un ions and coupling for connection with inlet, outlet and overflow pipes 40mm dia CP flush bend including cutting holes in wall and conecting the flush bend with cistern ( overfloe pipe) to be measured and paid separatly etc. complete in all respect. Vitreos chine white1Nos.
6150Providing and fixing in position brass mosquito proof coupling for overflow pipe 25mm nominal dia( overflow pipe to be measured and paid separatly)1Nos.
6251Providing and fixing GI inlet connection for flush pipe with W.C pan1Nos.
6352Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or MS bracket painted white including cutting holes and making good the same but exluding fiitng flat back 550x400 mm1Nos.
6453Providing and fixing vitreous china Pedestal for wash basin complete resessed at the back for racaiption of pipe and fitting CERA with single hole for pillar tap with CI or MS Bracket painted white including cutting holes and making good the same but excluding fittng flat back1Nos.
6554Providng and fixing CP Brass chain 50cm long and rubber plug of following size for sink or wash basin 32 mm dia1Nos.
6655Providing and fixing CP brass waste pipe for wash basin or sink 32 mm dia2Nos.
6756Providing and fixing G.I. Union for wash basin or sink 32 mm dia2Nos.
6857Providing and fixing 100mm sand cast/ cast iron pipe grating for gully floor or Nahani trap2Nos.
6958Providing and fixing 800x450mm leveled edge mirror for superior glass marked on 6mm thick AC sheet or plywood sheet and fixed to wooden plug with CP brass screw and washer8Nos.
7059Providing and fixing CP Brass towel rail complete with CP Brass bracket fixed to wooden plug with CP brass crome pipe PCASSO Range8Nos.
7160Providing and fixing CP brass bib tap with capston head 15mm dia crome plate ARK -GARNET collection8Nos.
7261Providong and fixing concelaed stop cocks 15m dia crome plate ARK GARNET collection8Nos.
7362Providing and fixing PVC connection pipe with brass union 300 cm length 15mm nominal bore6Nos.
7463Providing and Brass Full way valve with wheel ZOLOTO make 15mm dia2Nos.
7564Constructing chamber 600 x 450 x 600 mm inside size for water meter complete with CI double flap surface box 400mmx200mmx200mm(inside) with locking arrangement and RCC top slab 1:2:4 mix ( 1 cement 2 sand 4 graded stone aggregate 20 mm nominal size 100 mm thick foundation concrete 1 : 5 :10 (1 Cement 5 sand 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 Cement : 3 sand) funished with a floating coat of neat cement including curing complete With 200 mm thick walls of brick masonry in cement mortar 1 : 5 ( 1 cement : 5 sand)4Nos.
7665Exacavation in drain and channels etc. In earthwork including dressing of sites levelling of bed and disposing the exacavated earth upto all leads and lifts18.4Nos.
7766P/F vitreosus china sink for lab1Nos.
7867P/F CP grating in floor trap2Nos.
7968P/F Capson head bib cock for lab sink2Nos.
8069Electrical Installations:-
8169.01Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group \"C\"28Nos.
8270Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.50Nos.
8371Supplying & Fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-
8471.014 modules (140mmx78mmx50mm)8Nos.
8571.026 modules (205mmx78mmx50mm)7Nos.
8671.038 modules (120mmx135mmx60mm)2Nos.
8772Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.
8872.012 x 1.50 Sq. mm.130Meters
8972.022 x 2.50 Sq. mm.30Meters
9072.032 x 4.00 Sq. mm.40Meters
9173Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.26Meters
9274Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.10Meters
9375Supplying and Fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.
9475.01S.P. 5/ 6 Amps one way Modular switch.11Nos.
9575.025 pin, 5/ 6 Amps Modular socket outlet.11Nos.
9675.03Bell push, Modular.2Nos.
9776Supplying and Fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.
9876.01S.P. 15/ 16 Amps one way Modular switch.6Nos.
9976.026 pin,15/16 Amps Modular socket outlet.6Nos.
10077Supplying and Fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.
10177.01Telphone socket outlet, Modular1No.
10278Supplying and Fixing ceiling rose on the existing junction box / wooden block including connections etc. as required.25Nos.
10379Supplying and Fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-
10479.01Double door-12 way1Nos.
10580Supplying and Fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.
10680.0163 Amps. Cat-A.1Nos.
10781Supplying and Fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 450 mm & cross-sectional area (25.4 mm x 4.75 mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530 mm x 450 mm x 150 mm) nominal with all accessories including connections, earthing the body etc. as required.4Nos.
10882Providing and Fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required.
10982.01100 Amp. Category-A4Nos.
11083Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required.
11183.01Single pole & neutral. Cat-B.9Nos.
11284Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 35 mm x 35 mm x 6 mm thick duly welded complete with 2.80mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required.1Sqm
11385Supplying and Fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.
11485.0140 Amps. Cat-B.1No.
11586Supplying and Fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required.8Nos.
11687Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.1Set
11788Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.1Set
11889Providing and Fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.1No.
11990Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and Fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required.
12090.0125 Liter capacity water heater (Cat-A)1Nos.
12190.0210 Liter capacity water heater (Cat-A)1Nos.
12291Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and Fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.
12391.01Ceiling Fan 1400 mm sweep, Category-A3Nos.
12492Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required.
12592.01Exhaust Fan, Light duty, (Domestic) 225 mm sweep3Nos.
12693Providing and Fixing of Syska make LED Tube Fixture 18 watt complete in all respect in all leads and lifts.20Nos.
12794Supplying and Fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-2Nos.
12895Supplying and Fixing bakelite batten/angle holder including connections etc. as required.20Nos.
12996Repair work in Ground Floor
13096.01Repair to plaster in patches of 2.5 Sq. M and under 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within aa Leaad of 20 metres with cement mortar 1 :4 (1 Cement :4 Sand)16.4sqm
13197Applying two coat of putty on new cement plaster surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with branded putty (Birla White wall care putty).16.4sqm
13298Applying priming coat on new concrete/ plastered surfaces after and including preparing the surface clean.16.4sqm
13399Providing woodwork in frames of 1st class deodar wood for doors, windows, clerestory, windows and other frames wrought, framed and fixed in position and making good the damage to walls complete.0.115cum
134100Supplying and fixing glass panes with old beeds and nails including removal of broken glass panes wherever necessary.4.15sqm
135101Supplying and fixing glass panes with putty and nails including removal of broken glass panes\nwherever necessary:-1.125sqm
136102Distempering (Two) coat with oil bound waashable distemper of approved brand and manufacture and of required shade, on decorated wall surfaces to give an even shade, after thoroughly brushing the surface clean of all grease, dirt , loose pieces of scales and also including preparing the surfaace even and sand papered smooth.509.944sqm
137103Painting two coats (excluding priming cost on previously painted steel and other metal surface either enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters:- Enamel white paint.36.845sqm
138104Painting one coat (excluding priming coat) on previously painted wood and wood based surfaces with enamel paint to given an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping with white enamel paint in doors and window shutter.73.69sqm
139105Providing and fixing brass curtain rail with rollers stop ends and brackets instead of wooden curtain rod 25mm dia and brackets of first class deodar wood (actual length) of rails to be measured. curtain brackets :- 32No.s and 20.90mtrs rod length21.9meter
140106Providing and fixing new readymade curtains in doors and windows of size 4*722No.s
141107Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement.40 mm thick1.82sqm
142108Providing and fixing 10.0/12.5/15.00 litres viterious china low level flushing cistern white.1No.s
143109Providing and fixing angle cock of steel jal co.2No.s
144110Providing and fixing long nose cock of Jal co.4No.s
145111Providing and fixing bib cock of Jal co.2No.s
146112Supplying and Fixing bakelite batten/angle holder including connections etc. as required.4No.s
147113Providing and fixing power plug of good brand2No.s
148114Providing and laying cement concrete 1:5:10 (1 cement:5 sand:10 graded stone aggregate 40mm nominal size) excluding cost of centring and shuttering in:0.3cum

AI Tender Summary

OUR REF NO 26294323
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 30-12-2020
Authority
Authority Name Irrigation And Public Health Department
Work Description Nhp Renovation And Construction Of Hydrology Construction And Maintenance Level Ii Laboratory Building At Dharamshala Dhagwar Under Hydrology Sub Division Palampur Distt . Kangra Hp , Civil Works , Excavation In Foundation Trenches Etc . In Earth Work . , Providing & Laying Cement Concrete 1:4:8 ( 1 Cement : 4 Sand :8 Graded Stone Aggregate 40 Mm Nominal Size ) And Curing Complete Excluding Cost Of Centring & Shuttering Infoundation & Plinth . , Random Rubble Masonry Coursed With Hard Stone Of Approved Quality In Foundation And Plinth In R . Walls / B . Wallsi / C Raking Out Joints In :Laid Dry . , Boulder Filling Dry Hand Packed Tightly Under Floors , Providing & Laying Cement Concrete 1:5:10 ( 1 Cement : 5 Sand 10 Graded Stone Aggregate 40 Mm Nominal Size ) And Curing Complete Excluding Cost Of Centring & Shuttering Infoundation & Plinth . , Brick Work Using Common Burnt Clay Building Bricks Super-Structure Above Plinth Level Upto Floor Two Level ( First Class Bricks ) . Cement Mortar 1:6 ( 1 Cement : 6 Sand ) First Class Bricks , Half Brick Masonry In Common Burnt Clay Building Bricks In :-Cement Mortar 1:4 ( 1 Cement : 4 Sand ) First Class Bricks Including All Leads And Lifts , Providing Form Work With Steel Plates 3 . 15Mm . Thick Welded With Angle Iron In Frame 30X30x5mm . So As To Give A Fair Finish Including Centring , Shuutering , Strutting And Propping Etc . With Wooden Battens And Ballies , Height Of Propping And Centring Below Supporting Floor To Ceiling Not Exceeding 4 Mtrs . And Removal Of The Same For Insitu-Reinforced Concrete & Plain Concrete Work In: ( A , Foundations , Footings , Basis Of Columns Etc . And Mass Concrete . , Columns , Pillars . Posts And Struts . , ) Flat Surfaces Such As Soffitsof Suspended Floors , Roofs , Landings And The Like . , Beams , Cantilever , Girders And Lintels . Sides And Soffits Of Beams , Beam Haunchings , Cantilevers , Bressumers And Lintels Not Exceeding 1 Mtr . In Depth In All Heights From Floor . , Staircase Sloping Surfaces , Providing & Laying Cement Concrete Work 1:11 / 2: 3 ( 1 Cement : 11 / 2 Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) And Curing Complete Excluding Cost Of Form Work And Reinforcement For Reinforced Concrete Work In:- , Providing Mild Steel / Tor Steel Reinforcement For R . C . C . Work Including Bending , Binding And Placing In Position Complete Upto Floor Two Level :Tor Steel , Providing And Fixing Pressed Steel Doors Frames Manufactured From Commercial Mild Steel Sheet Of 1 . 25Mm Thickness Including Hinges Jumb Lock Jamb , Beed And If Reuired Angle Threshold Of Mild Steel Angle Of Section 50X25 Mm , Ii ) Glazing In Aluminium Door , Window , Ventilator Shutters And Partition Etc With Pvc / Neoprens Gasket Etc . Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item . ) Glazing With Glass Panes Of 5 . 50Mm Thickness ( Weight Not Less Than 13 . 75 Kg / Sqm ) , Providing And Fixing Wire Gauge Shutters Using Galvanised M . S . Wire Gauge Of I . S . Gauge Designation 85 G . With Wire Of Dia 0 . 56 Mm For Doors Windows And Clerestorey Windows Including Bright Finished Black Enamelled Iron Hinges With Necessary Screws . 30 Mm Thick Aluminium Framess , Providing And Fixing Of Action Tesa ( Medium Density Fiber Board ) Pre Laminated Wooden Cup Board Of Size 18 Mm . Anti Termite And Dampness Proof Including All Materials And Fittings Etc . In All Leads And Lifts As Per The Entire Satisfaction Of The Engineer - In - Charge . , Providing And Fixing 12Mm Thick 150Mm Wide Pelmet With 25 Mm Diametre Wooden Curtain Rods And Brackets Including Fixing 25X3mm M . S . Flat At 10 Cm . Long And Plugs Etc . Complete . , Providing And Fixing Brass Curtain Rail With Rollers Stop Ends And Brackets In Pelmets Instead Of Wooden Curtain Rod 25 Mm Dia And Brackets Of First Class Deodar Wood ( Actuallenght ) Of Rails Of Be Measured . , Providing And Fixing New Readymade Curtains In Doors And Windows Of Size 4*7 , 6Mm Cement Plaster To Ceiling In Cement Mortar 1:3 ( 1 Cement:3 Sand ) , 15Mm Cement Plaster In Single Coat On Fair Side Of Brick / Concrete / Stone Walls For Interior Plastering Upto Floor Two Level Including Arrises , Internal Rounded Angles , Chamfers And / Or Rounded Angles Not Exceeding 80Mm In Girth And Finished Even And Smooth . In Cment Mortar 1:6 Inlcuding All Leads And Lifts , Applying Birla White Wall Care Putty Over Plaster Surface After Thoroughly Brushing The Surface Free From Mortar Drops , Dust , Loose Materials And Other Foreign Matters Sand Papered Smooth To Give Final Matter Finish To The Surface Complete . , Applying One Coat Of Acrylic Primer ( Spectrum Or Equivalent Of Superior Quality ) On New Concrete / Masonry / Plastred Surfaces After And Including Preparing The Surface By Thoroughly Brushing The Surface Free From Mortar Droppings And Other Foreign Matters , Sand Papering The Surface Smooth Complete . , Wall Painting ( Two Coats ) With Acrylic Plastic Emulsion Paint Of Approved Brand & Manufactureon Undecorated Wall Surfaces To Give An Even Shade I / C Thoroughly Brushing The Surface . , Kota Stone Slab Flooring 20 Mm ( Average ) Thick Base Of Cement Mortor 1:4 ( 1 Cement :4 Sand ) Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab . Including Rubbing And Polishing Complete . 25 Mm Thick In All Leads And Lifts , Providing And Fixing 10 Mm Thick Anti Skid Water Proof Stain And Impect Resistent Heavy Duty Vetrified Tiles Nitco Or Equivlant 300 X 300X10 Mm Manufactured Of Approved Shade And Colour In Flooring , Tread Of Steps And Landings Laid Over 12Mm Thick Cement Mortor 1:3 ( 1Cement : 3 Sand ) Jointed With Cement Slurry Mixed With Pigment To Match The Shade Of Tiles As Required Complete . , White Glazed Tiles 6 Mm Thick In Flooring , Treads Of Steps And Landing Laid On A Bed Of 12 Mm Thick Cement Mortar 1:3 ( 1 Cement :3 Sand ) Finished With Flush Pointing In White Cement . , Providing And Laying Spartic Ceremic Tiles 5 . 5Mm . Thick In Flooring ( 300 X300mm . Size ) Treads Of Steps Laid On A Bed Of 12Mm . Thick Cement Mortar 1:3 ( 1Cement: 3 Sand ) Finished With Flush Pointing In White Cement . , Providing And Fixing Anodized Aluminium Sliding Door Bolt Anodized Colour And Shade With Bolts And Nuts Screws Etc . Complete . 2500X16mm , P / F Aluminium Handles Anodized Colour & Shade With Nuts & Bolts Screw Etc125 Mm . , P / F Aluminium Tower Bolts Anodized Colour & Shade With Nuts & Bolts Screw Etc . 150 X 10 Mm , Steel Work Welded In Built Up Section , Trusses And Framed Work , Including Cutting , Hoisting Fixing In Position And Applying A Priming Coat Of Red Lead Paint . , Providing And Fixing 0 . 60Mm Thick Prepainted Steel Sheet In Roofing With Hot Dipped Metallic Zinc Coated Sheet With Top Coat Of Regular Modified Polyster ( Rnp ) Organic Coating Of 20 Microns Over 5 Microns Primer Coating To Back Coat Of Polyster 5 Microns Primer Coating Icluding Fixing With Prepainted Iron J Or L Hooks , Bolts And Nuts 6Mm Diametre With Prepainted Limpet And Rubber Washers Complete With All Accesoriees As Required As Per The Direction Of Engineer-In-Charge . , Providing Ridges Or Hips 60 Cm Over All In Plain With Galvanised Iron G . I Sheet Fixed J Or L Hooks Bolts And Nuts 8Mm Dia G . I Limpet And Bitumen Washers Complete . . 63 Mm Thick Sheet . , Steel Work Welded In Built Up Section , Gratings , Framed Gaurds Etc . , I ) In Gratting , Framed Guard Bar , Ladders , Railing Brackets And Similar Works . , Providing And Fixing Ms Stair Case Comprising Of 150 Mm Ms Pipe 7 . 10 Mm Thick , Ms Angle 50X50x6 Mm , Chequered Plate 7 Mm Thick , Ms Black Pipe 40 Mm Dia , Ms Flat 40 X 5 Mm And Square Bars 12 Mm Including Cost Of Welding , Labour And Carriage Complete In All Respect In All Lead And Lift As Per Entire Satisfation
Basic Detail
Tender No 4397-4477
Bidding Type Tender
Location
City Shimla
State Himachal Pradesh
Key Dates
Publish Date 15 Dec 2020
Submission Date 30 Dec 2020
Open Date 30 Dec 2020
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
BOQ_64018.xls
Tendernotice_1.pdf
79829771-D718-45AE-84F7-68A654446356.html
Biddocumentdshala.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Dec 15, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 30, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Dec 30, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
xls

BOQ_64018.xls

pdf

Tendernotice_1.pdf

html

79829771-D718-45AE-84F7-68A654446356.html

pdf

Biddocumentdshala.pdf

TenderDetail
Loading tenders