Supply Of Constructional Materials For Foot Suspension Bridge In 2 Mtn Div Sector, DINJAN-Assam

Supply Of Constructional Materials For Foot Suspension Bridge In 2 Mtn Div Sector - 2 Prepainted Aluminium Framed Deck Unit Made Of 1.5 Mm Thick Aluminium Section Size 63 Mm X 25 Mm With Non Skid Aluminium Sheet 16 Gauge Thick 2 X 7.5 3 Transom 2.5’ Long Made Of 5 Mm Thick Iron Square Channel Size 63 Mm X 38 Mm With 5 High Tension Nut & Bolt Both Side With Washer 4 Swr Rope 8 Mm Dia For 1.7 Mtr Suspender ( 84 Nos ) ( Make : Usha Martin Or Equivalent ) 5 Swr Rope 12 Mm Dia ( Make : Usha Martin Or Equivalent ) 6 Swr Rope 10 Mm Dia ( Make : Usha Martin Or Equivalent ) 7 Op Holdfast Fabrication Of 900 Mm Long Holdfast With 11 Mm High Carbon Plate By Curving As Per Required Size With 1 Dia X 10 Nos Hole For Holdfast Pin. Both End Of Curved Plate Is Fixed With 8 Mm X 100 Mm Wide Plate For Extra Strength, 1 No D Clamp Fitted With 100 Mm Dia O Ring Of 20 Mm High Carbon Rod, All As Directed And Painted With Black Colour Followed By Red Oxide. 8 Op Pin Fabricated Of 25Mm Dia With High Tensile Rod And Machined At One End For Pointed End For Grouting And Other End Fitted With 10 Mm Clit With 25 Mm Hole For Hooking Up, All As Directed And Painted With Synthetic Enamel Paint Followed By Red Oxide. 9 Morris Block 2 Ton ( Index ) 10 Nylon Rope 8Mm 11 Nylon Rope 10Mm 12 Bulldog Grip 8Mm 13 Bulldog Grip 12Mm 14 Bulldog Grip 10Mm 15 Modified Steel Crib ( 2 X 2 X 6 ) , Fabricated By 50 X 50 X 6 Mm Angle ( Sail ) With Cross Support At Each Ends Welded With Esab Welding Rod. Suitable Hole Of Size 14 Mm Be Made As Required For 12 X 50 Mm Long High Tensile Bolt & Nuts. All As Directed And Painted With Grey Enamel Paint Followed With Red Oxide 16 Ladder Side Catcher High Tensil Nut & Bolt With Two Ms Cleat 17 Hammer 5 Kg ( Make : Taparia ) 18 Pulley 12 Mm With Bearing 19 Clamping Rope 12 Mm 20 Carabineer 21 Chest Harness 22 Snatch Block 16 Mm 23 Sliding Handle With Pulley 24 Gi Thimble 16 Mm

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	03-01-2021	Corrigendum3	Date	11-01-2021
2	10-01-2021	Corrigendum4	Date	13-01-2021
3	13-01-2021	Corrigendum5	Date	20-01-2021
4	28-12-2020	Corrigendum2	Date	04-01-2021

Refer document

Refer document

Refer document