Station Name Board Led Based In Tri Language-Gujarat

Supply Of , Station Name Board Led Based In Tri Language. Provide Lettering In English, Hindi And Gujarati Languages By Emboss ( Box Type ) Work In Red Colour 2Mm ( Approx. ) Acrylic Sheets Of Gsfc Make Or Equivalent Make. The Height Of Letters Should Be 400 Mm For English And 450 Mm For Hindi And Gujarati And Depth Should Be Minimum 4 Inch. 3 Inch Foam Sheet 2.5 Mm ( Approx. ) Should Be Fixed Inner Side Of Letters. The Letters Should Properly Cover At Back Side By 4 Mm ( Approx. ) Foam Sheet For Vermin And Dust Proofing. The Letters Should Illuminated With Uniform Brightness By Providing Leds Of Low Heat Having Red Colour Led Modules Which Should Water Proof, Shock Proof And Connected With Proper Polarity. Led Modules Should Be Of Tetra Max Model Of Ge Or Equivalent Model Of Philips / Wipro Make Only. Led Modules Are Fixed On 4 Mm Foam Sheet By Vhb Tm Industrial-Grade Mounting Tape For Convenience And Savings. Inner Side Led Wiring Of Letter Should Be Done By 1 Sq. Mm. Fr / Frls Wire And Outside Between Letters By 1.5 Sq. Mm. Fr / Frls Wires. The Ready Letters Should Be Fixed With Aluminium Rivet Or Screw On 4 Mm. Sheet By Using Not Less Than 25 X 25 X 2 Mm. Aluminium Angle. Power Supply Should Be Geps12-60U Of Ge Or Equivalent Of Philips / Wipro Make Only. One No Power Supply Should Be Used For Maximum 135 Nos. Modules Only. Proper Arrangement For Power Supply To Safe Guard From Rain And Dust Should Be Done. %U2022 The Firm Shall Provide Fabricated New Board Of 22 Swg G.I. Sheet And Acp Sheet Of 4 Mm. Of White Colour Of Eva, Viva Or Timex Make. %U2022 The Back Portion Of Board Shall Be Gi Sheet Painted With Two Coats With White Oil Paint Of Nerolac / Asian Make, Front And Outer Sides Of The Board Box Shall Be Of Acp Sheet. %U2022 Inner Side Structure Of Suitable Strength Shall Be Fabricated With 25X25 Mm Of 18 Swg Square Ms Pipe. %U2022 The Board Box Shall Be Of Suitable Length To Accommodate ( Approx. 7 To 11 Letters ) 400 Mm Letter Height For English And 450 Mm For Hindi And Gujarati. %U2022 The Firm Shall Provide The Suitable Mounting Arrangements Of Led Name Boards With 35 X 35 X 5 Mm. Ms Angle, Necessary Hardware Such As Nut Bolts, Gi Clamps And Two Coats Painted With Black Oil Paint. The Masonry Work Shall Be Done If Required. The Board Should Be Water, Dust And Vermin Proof Suitable For Single-Phase, 230V, 50 Hz Ac Supply System And Properly Earthed With 14 Swg Copper Wire. Power Connection To Board Should Be Made With 3 Nos. 2.5 Sq. Mm. Pvc Insulated Copper Wire In Pvc Pipes. The Contractor Shall Provide The Mounting Arrangement To Led Boards As Per Site Requirement With Necessary Hardware Such As Gi Pipe, Gi Clamp, Nut-Bolt Etc. Of Suitable Size. Colour Of Led: Red.

Refer document

Refer document

Refer document

	0	1	2	3	4	5	6	7	8	9
0	S.No.	PL Code\r(Group)	Item Type\rGST(Y/N)	Stock /\rNonStock	Ordering	Consider For\rEval	Approving\rAgency	Inspection\rAgency	Currency\rAllowed	Estimated\rRate
1	1	42XXN01	Goods (Y)	Non Stock	---	Yes		CONSIGNEE	INR
2		Description :Station Name Board LED based in Tri language. Provide Lettering in English, Hindi and Gujarati languages by Emboss (box type) work in RED\rcolour 2mm (Approx.) acrylic sheets of GSFC make or equivalent make. The height of letters should be 400 mm for English and 450 mm for Hindi and\rGujarati and depth should be minimum 4 inch. 3 inch foam sheet 2.5 mm (Approx.) should be fixed inner side of letters. The letters should properly cover at\rback side by 4 mm (Approx.) foam sheet for vermin and dust proofing. The letters should illuminated with uniform brightness by providing LEDs of low heat\rhaving RED colour LED modules which should water proof, shock proof and connected with proper polarity. LED modules should be of tetra max model of\rGE or equivalent model of Philips/Wipro make only. LED modules are fixed on 4 mm foam sheet by VHB TM industrial-grade mounting tape for convenience\rand savings. Inner side LED wiring of letter should be done by 1 sq. mm. FR/FRLS wire and outside between letters by 1.5 sq. mm. FR/FRLS wires. The\rReady letters should be fixed with aluminium rivet or screw on 4 mm. sheet by using not less than 25 x 25 x 2 mm. aluminium angle. Power supply should be\rGEPS12-60U of GE or equivalent of Philips/Wipro make only. One no power supply should be used for maximum 135 nos. modules only. Proper\rarrangement for power supply to safe guard from Rain and Dust should be done. %u2022 The Firm shall provide fabricated new board of 22 SWG G.I. sheet\rand ACP sheet of 4 mm. of white colour of EVA, VIVA or TIMEX make. %u2022 The back portion of board shall be GI sheet painted with two coats with white\roil paint of Nerolac/Asian make, front and outer sides of the board box shall be of ACP sheet. %u2022 Inner side structure of suitable strength shall be\rfabricated with 25x25 mm of 18 SWG square MS pipe. %u2022 The board box shall be of suitable length to accommodate (approx. 7 to 11 letters) 400 mm\rletter height for English and 450 mm for Hindi and Gujarati. %u2022 The Firm shall provide the suitable mounting arrangements of LED name boards with 35 x\r35 x 5 mm. MS angle, necessary hardware such as nut bolts, GI clamps and two coats painted with black oil paint. The masonry work shall be done if\rrequired. The board should be water, dust and vermin proof suitable for single-Phase, 230V, 50 Hz AC supply system and properly earthed with 14 SWG\rcopper wire. Power connection to board should be made with 3 Nos. 2.5 sq. mm. PVC insulated copper wire in PVC pipes. The contractor shall provide the\rmounting arrangement to LED boards as per site requirement with necessary hardware such as GI pipe, GI clamp, nut-bolt etc. of suitable size. Colour of\rLED: RED.
3		Consignee	Sr.Section Engineer /Electrical(Power)-ADI	Gujarat	13.00 Sqm