| 1 | 1 | Trimming of grass, shrubs, and weeds from the shoulders / Berms etc. complete. | | 450 | Square \nMeter |
|---|
| 2 | 2 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. | | 591.3 | Cubic Meter |
|---|
| 3 | 3 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and\ncamber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 mm) Aggregate) | | 210 | Cubic Meter |
|---|
| 4 | 4 | Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40mm. stone layers metal 100% crusher broken metal , heating and spraying the bitumen of VG30 @ 1.75 kg / sqm, spreading 12mm.size chips compacting with Static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat at the rate of 0.30 Kg Sqm.(on existing bitumen surface.) | | 2700 | Square \nMeter |
|---|
| 5 | 5 | Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. | | 2700 | Square \nMeter |
|---|
| 6 | 6 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type\nhot mix plant with SCADA, Paver and Vibratory roller ( Over MPM\nSurface) | | 2700 | Cubic Meter |
|---|
| 7 | 7 | Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static\nroller having weight 8 to 10 MT. etc. complete. | | 2700 | Square \nMeter |
|---|
| 8 | 8 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. | | 81 | Cubic Meter |
|---|
| 9 | 9 | Spreading hard murum for side width etc. complete. | | 81 | Cubic Meter |
|---|
| 10 | 10 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete.\nSpec. No. As directed by Engineer in Charge | | 1 | Number |
|---|
| 11 | 11 | Add Quality Control Charges for Frequency Test of Materials \nBitumen | | 1 | Test |
|---|
| 12 | 12 | Metal | | 2 | Test |
|---|
| 13 | 13 | Murum | | 1 | Test |
|---|
| 14 | 14 | Providing Royalty for the Materials | | 440.671 | Cum. |
|---|
