Instalation And Energisation Of Khandahata-Ii Li Project
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Dec 2020
0 days left
EMD
13309
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
TIGIRIA → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Instalation And Energisation Of Khandahata-Ii Li Project
BOQ
| Name of Work: INSTALLATION AND ENERGISATION OF KHANDAHATA-II LI PROJECT UNDER TIGIRIA BLOCK IN CUTTACK DISTRICT | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 2 | Earth work in hard soil for excavation of foundation including dressing and levlling the bed and depositing the soil within 50 mtr. initial lead and 1.5 mtr. initial lift as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001113 | 635.64 | Cum |
| 2 | 3 | Filling in foundation and plinth with sand watered and rammed including cost of sand as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001114 | 4.48 | cum. |
| 3 | 4 | Cement concrete (1:4:8) with 4 cm size h.g. metal as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001115 | 2.83 | cum. |
| 4 | 5 | Ist Class K.B.Brick (25cm x 12 cm x 8 cm ) having crushing strength not less than 75kg./cm2 with dimensional tolerance + 8% in cement mortar (1:6) in foundation and plinth. | BI01010001010000000000000515BI0100001116 | 2.15 | cum. |
| 5 | 6 | CC(1:2:4) in foundation and plinth | BI01010001010000000000000515BI0100001117 | 0.91 | cum. |
| 6 | 7 | Cement concrete (1:2:4) with 12mm size h.g chips for R.C.C. works including hoisting and laying. | BI01010001010000000000000515BI0100001118 | 3.57 | cum |
| 7 | 8 | Rigid smooth centering and shuttering for R.C.C. works including false work and dismentling them after casting including cost of materials complete in roof slab & Chajja. . | BI01010001010000000000000515BI0100001119 | 34.64 | Sqm. |
| 8 | 9 | Labour cost for cutting, bending and binding of M. S. rod placing in position including cost of M. S. rod.Qty. @ 0.9% of R. C. C. work or 1.40qtl @ 78 qtl / cum | BI01010001010000000000000515BI0100001120 | 2.79 | Qtl. |
| 9 | 10 | 12mm thick cement plaster (1:6) for brick masonary | BI01010001010000000000000515BI0100001121 | 61.94 | Sqm. |
| 10 | 11 | Cement Punning | BI01010001010000000000000515BI0100001123 | 18.24 | Sqm. |
| 11 | 12 | Labour charges for lettering the display board in black colour , yellow back ground painting including the cost of materials. | BI01010001010000000000000515BI0100001113 | 1 | No |
| 12 | 13 | Filling F & P with excavated materials including watering and ramming as directed by the Engineer-in-charge. | BI01010001010000000000000515BI0100001114 | 635.64 | Cum |
| 13 | 14 | Labour charges for laying and jointing of 200mm dia PVC Pipe including carriage from stacking yard to site. | BI01010001010000000000000515BI0100001115 | 743 | Mtr. |
| 14 | 15 | Provision for M. S. bolt for foundation 4 nos and MS hook for handling of FF | BI01010001010000000000000515BI0100001116 | 2.6 | Kg |
| 15 | 16 | Cost of construction of river bed shallow T/W of 12m depth including cost of materials and lowering | BI01010001010000000000000515BI0100001117 | 1 | No |
| 16 | 17 | Dismantling of Lime Concrete, cement concrete grade M-10 and below including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres Unit = cum | BI01010001010000000000000515BI0100001118 | 1.22 | cum. |
| 17 | 18 | Cost of laying and fitting of MS Tee and other PVC fitthing along the pipe line. | BI01010001010000000000000515BI0100001119 | 7 | No |
| 18 | 19 | Extra labour and materials required for fitting and fixing of 25mm dia GI pipe for 50mm dia CI Air release valve at the sutable location of PVC pipe inside the air realease chamber including cost of petty materials. | BI01010001010000000000000515BI0100001120 | 4 | No |
| 19 | 20 | Laying and fitting of 100mm dia GI pipe | BI01010001010000000000000515BI0100001121 | 132 | Mtr. |
| 20 | 21 | Laying and fitting of 150mm dia GI pipe | BI01010001010000000000000515BI0100001122 | 152 | Mtr. |
| 21 | 22 | 10 H.P.Monoblock Pump set ( BEE STAR Lebeled Energy efficient ) coupled with totally enclosed squirrel cage induction motor with delivery discharge 1700 LPM at 22 mtrs. Head with cable, cable clip, support clamp etc. suitable for operation at 415+6% ,-15% volt,3 phase ,50 Hz, AC power supply with ISI mark and guarantee .\nThe materials of construction as given below.\n(a) Motor casing.. stainless steel AISI 304\n(b) Impeller ... bronze \n(c) Pump shaft... stainless steel\n(d) Sand guard...... bronze.\n(e) Non-return valve... CIFG 200. | BI01010001010000000000000515BI0100001123 | 1 | No. |
| 22 | 23 | Automatic star-delta starter sheet steel enclosure suitable for operation of squirrel cage induction motors upto 15 HP having full load current of 16 Amp. At 415 V + 6% - 15% , 3 phase, 50 Hz,Ac supply with over load relay range 13.5 - 20 Amp and No Volt coil suitable for operation at voltage range of 350 - 440 V. The starter should provide depenmdable protection against overload and single phasing of reputed brand having wide dealership network for easy availoability of spares with ISI mark and guarantee. | BI01010001010000000000000515BI0100001113 | 1 | No. |
| 23 | 24 | Main Switch 63 Amp including fitting and fixing as per IS No.-4064(Part-I & II) with utilisation capacity category AC-22. | BI01010001010000000000000515BI0100001114 | 1 | No. |
| 24 | 25 | 3 ph. 4 wire 20 - 100 Amp. 3 x 230 Volt (P-N) current meter with ISI mark as approved by DISTCO,CESU with matching fibre glass with T.P Box(M.S) | BI01010001010000000000000515BI0100001115 | 1 | No. |
| 25 | 26 | Empty Panel Board | BI01010001010000000000000515BI0100001116 | 1 | No. |
| 26 | 27 | 4 KVAR Capacitor | BI01010001010000000000000515BI0100001117 | 1 | No. |
| 27 | 28 | 3 x 10 sqmm Trapoder cable XLPE (Cross link polyethylin ) including laying below the ground and filling the excavated materials including watering and ramming with ISI mark and guarantee. | BI01010001010000000000000515BI0100001118 | 80 | Mtr. |
| 28 | 29 | 100mm dia nominal bore G.I.Pipe having wall thickness 4.5mm electrical resistance welded of medium class conforming to IS - 1239 (part-I/2004) with latest \nAmendments,screwed at both ends as per IS -554 socketed at one end and the other end protected with plastic threaded protector. The socket conforming to IS:1239 (Part-II/1992) with latest Amendments in random length of 4 to 7 mtrs. Each pipe should bear ISI Certification and manufacturers name/trademark , for fitting in Suction & Delivery Pipes. | BI01010001010000000000000515BI0100001120 | 132 | Mtr. |
| 29 | 30 | 100 mm dia C.I.Reflux valve(N.R) | BI01010001010000000000000515BI0100001121 | 1 | Kg |
| 30 | 31 | 100 mm dia C.I.Sluice valve | BI01010001010000000000000515BI0100001122 | 1 | Kg |
| 31 | 32 | 100 mm dia GI Bend | BI01010001010000000000000515BI0100001123 | 2 | No. |
| 32 | 33 | 100 mm dia GI Flange | BI01010001010000000000000515BI0100001113 | 42 | Mtr. |
| 33 | 34 | 200mm dia PVC end cap | BI01010001010000000000000515BI0100001121 | 4 | No. |
| 34 | 35 | 100x150 mm dia GI RS | BI01010001010000000000000515BI0100001122 | 1 | No. |
| 35 | 36 | 150mm dia GI pipe | BI01010001010000000000000515BI0100001123 | 152 | No. |
| 36 | 37 | 150mm dia GI flange | BI01010001010000000000000515BI0100001113 | 44 | No. |
| 37 | 38 | 150x200 mm dia GI RS | BI01010001010000000000000515BI0100001114 | 3 | No. |
| 38 | 39 | Unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6(six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table-1 of IS - specification bearing ISI marks for working pressure Cl-II UPVC pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS-4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be conducted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar / EPM., Orissa, Bhubaneswar for necessary approval of authority including transportation and laying at site all complete.\n(i) 200 mm dia P.V.C. Pipe. | BI01010001010000000000000515BI0100001117 | 744 | Mtr. |
| 39 | 40 | 200X200X100mm dia M.S outlet Tee made with 201mm ID and 216 mm OD M.S Pipe of 8mm thick 400mm long fitted with 1 mtr long 100mm dia M.S.Pipe welded with 2 nos of 100mm dia M.S.Flange in between the 1 mtr M.S.Pipe and 0.25 mtr long 100 mm dia M.S.Pipe fitted horizentally with 2 mtrs of 100mm dia M.S.Elbow with water locking arrangement made out of 1 no. of 100mm dia open flange and 1 no. of 100mm dia blind flange and with hinges gaskets arrangement that UPVC pipe should be inserted directly 100mm long inside the 201mm dia ID M.S.Pipe at the both ends painted with two coats of anti corosive paints in complete set. | BI01010001010000000000000515BI0100001118 | 7 | No. |
| 40 | 41 | 200 mm dia PVC Equal Tee | BI01010001010000000000000515BI0100001119 | 3 | No. |
| 41 | 42 | 200 mm dia PVC bend | BI01010001010000000000000515BI0100001120 | 4 | No. |
| 42 | 43 | Solvent Cement | BI01010001010000000000000515BI0100001121 | 12.3 | Kg |
| 43 | 44 | Cost of 50 mm Ø Air release valve with acessories | BI01010001010000000000000515BI0100001122 | 4 | No. |
| 44 | 45 | 200mm dia PVC coupler | BI01010001010000000000000515BI0100001123 | 4 | No. |
| 45 | 46 | Cost of 150mm dia GI bend | BI01010001010000000000000515BI0100001121 | 4 | No. |
AI Tender Summary
Tender Timeline
Dec 15, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedDec 28, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 29, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender