TELANGANA STATE SEEDS DEVELOPMENT CORPORATION LTD has published Construction Of 6,300 Sft Seed Storage Godown With Structural Steel/Peb At Tssdc Ltd., Sarangapur, Nizamabad District.. Submission Date for this Tender is 23-12-2020. Godown Tenders in NIZAMABAD Telangana. Bidders can get complete Tender details and download the document.
| S.No | Subwork Name | Specification Number | Quantity | UOM | Rate(INR) | Amount(INR) |
|---|---|---|---|---|---|---|
| 1 | AS PER TENDER DOCUMENT | As per tender document | 1477.51 | sqm | 524.00 | 774215.24 |
| Providing Thermo Insulation with Supplying and fixing of 0.80mm thick Polynom Bubble Thermo Insulation with net including cost and conveyance of all materials and labour charges etc., complete. | ||||||
| 2 | AS PER TENDER DOCUMENT | As per tender document | 6.00 | Each | 9690.00 | 58140.00 |
| Providing and fixing of Air Ventilators 24"/31" throat/outer 510mm dia, top and bottom ring SS 304, 0.5mm thick, including FRP Base as per Roof Profile Sheet 1.50to 2.0mm thick 1800mm Length and 1080mm width. | ||||||
| 3 | AS PER TENDER DOCUMENT | As per tender document | 45.00 | Rmt | 386.00 | 17370.00 |
| Supply & Fixing of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L-Flashing, Down Pipes, Gutter etc., with 0.50mm thick, Width: 0.585, Length: Maximum 2½ Meters. Final work will be as per approved drawings and directions of Engineer in Charge including cost and conveyance of all materials and all labour charges etc. over heads and Contractors profit etc. complete | ||||||
| 4 | AS PER TENDER DOCUMENT | As per tender document | 1664.61 | sqm | 530.55 | 883158.84 |
| Providing and Fixing Pre-painted Galvalume Trapezoidal ProfileRoofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA.Paint coating: Regular Modified Polyester painting.Painting Thickness (Top): 18 to 20 Microns,(Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length:Maximum 12 Meters with Regular Range Colours including cost and conveyance of all materials and labour charges for fixing sheets and including cost of J-bolts, bituminous washers etc,. and overheads & contractors profit complete for finished item of work. | ||||||
| 5 | AS PER TENDER DOCUMENT | As per tender document | 18158.11 | K.G. | 110.35 | 2003721.97 |
| PRE ENGINEERED BUILDING WORK: Design, supply, delivery and erection of pre-engineering building structure (over the ready available RCC pedestals as specified in the drawing) comprising of columns, frames, purlins, canopies at specified places, galvalume sheet roofing & cladding alround the building, gutters, down take pipes, necessary accessories required for erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, flashings and all necessary operations with primer etc., complte. The contractor has to supply fabrication drawings/shop drawings for approval before execution. Basic building description:-a)Width:29.00m (outer to outer) b) Length:38.43m (outer to outer) c)frame for roof structure: Rigid frame at edges for high bay portion and clear height : Bay -9.50 m at centre and 7.90m at edges, for the shed, wind bracing : rod, roof cladding- 26 gauge bare galvalume sheets for roof and colour galvalume for walls, eave condition-gutter and down pipe including cost ana conveyance of all materials, fabrication and erection charges of all tools and plants, overheads and contractor profile etc., complete for finished item of work.(The item shall be executed as per the drawings and relevant codes) | ||||||
| 6 | AS PER TENDER DOCUMENT | As per tender document | 124.40 | sqm | 168.00 | 20899.20 |
| Painting to new iron works with 2 coats of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ literof approved brand and shade over 1 coat of Red Oxide Primer Paint for iron works of Grade -1 of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including overheads & contractors profit complete for finished item of work for:-Painting to Iron work - Synthetic enamel paint to New Iron Work - 2 coats + 1 coat Iron primer | ||||||
| 7 | AS PER TENDER DOCUMENT | As per tender document | 557.20 | sqm | 231.00 | 128713.20 |
| Painting to new external walls with 2 coats of acrylic emulsion paint exterior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912. | ||||||
| 8 | AS PER TENDER DOCUMENT | As per tender document | 557.20 | sqm | 127.00 | 70764.40 |
| Painting to new walls with 2 coats of acrylic based Oil Bound washable Distemper of approved brand and shade over a base coat of water based Cement Primer of Interior Grade- 1 of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 911 for internal walls | ||||||
| 9 | AS PER TENDER DOCUMENT | As per tender document | 60.80 | sqm | 4441.21 | 270025.59 |
| Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., overheads & contractors profit complete for finished item of work as per special spn: 1108 operated with steel gear box of size 150mm x 1500mm with 2 side locks Rolling shutter of size 3500m x 4000mm | ||||||
| 10 | AS PER TENDER DOCUMENT | As per tender document | 63.60 | K.G. | 8160.55 | 519011.29 |
| Supply and fixing of ornamental grill made of 40mm x 40mmx 5mm MS angle alround the opening & 12mm square bars @ 125mm center to center to the peripheral angle for openings as per the approved drawing including cutting to required length, welding, painting with two coats of synthetic enamel paint over red oxide single coat including cost and conveyance of all materials, labour charges etc., complete for finished item of work for openings in buildings. | ||||||
| 11 | AS PER TENDER DOCUMENT | As per tender document | 21.60 | sqm | 1228.90 | 26544.24 |
| Fabrication, supply & fixing of MSL angular ply proof ventilators with frame of size 25x25x5 mm thick and also providing 20mmx5mm MS flat diagonally with Fly proof Mesh 12 gauge 1"x1" pitch welded to outer & diognal frame as per the design and direction of Engineer - in -charge, including cost of MS frames, mesh, furniture like screws, nails etc., and labour for fixing to RCC/brick wall. lead, lift, scaffolding taxes etc., complete for finished item of work at all heights ( Taking out put 1.90x1.72 = 3.27sqm Windows) including one coat of red oxide paint. | ||||||
| 12 | AS PER TENDER DOCUMENT | As per tender document | 42.00 | sqm | 6344.26 | 266458.99 |
| Providing and fixing of Three shutter Sliding Windows made of Galvanized Steel as per IS 513, D quality, galvanized as per IS 277 powder coated with Pure polyester powder and thickness of 0.8 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminium 1 No. per each shutter and including installation of window system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished item of work for Window with 3 shutters (Centre fixed shutter / Centre sliding shutter / centre Fly mesh shutter) and without Grill Window made of Outer Frame of size 90mm x 50mm. i) Centre Shutter Fixed: centre shutter frame made of section with size 20mm x 47mm of 0.58mm thick should be fitted with 5mm thick plain float glass of reputed make, EPDM gasket all around the glass and fixed to the Outer Frame with the supporting section of size 29mm x 20mmof 0.58mm thick fixed horizontally on top and bottom of the shutter frame. | ||||||
| 13 | AS PER TENDER DOCUMENT | As per tender document | 36.00 | Rmt | 70.44 | 2535.84 |
| Providing and fixing of 24 gauge alluminium sheet over expansion joint groove of width 15cm fixed to walls / columns at one edge and resting over the other block walls/columns concealing expansion joint with slotted holes for free edge of aluminium sheet to facilitate free movement of aluminium sheet over the finished surface of expansion joint and wall face using sheet metal screws with nylon receiver complete including cost and conveyance of all materials to site, all incidental, operational, labour charges , overheads & contractors profit etc., complete for finished item of work as per approved drawing (for all floors for vertical joints and bottom of slab) | ||||||
| 14 | AS PER TENDER DOCUMENT | As per tender document | 18.00 | sqm | 415.83 | 7484.94 |
| Providing and fixing of Expansion joint filler board for buildings, columns, beams and slabs 25 mm thick including cost and conveyance of all materials to site, all incidental, operational, labour charges etc.overheads & contractors profit complete for finished item of work as per approved drawing for all floors | ||||||
| 15 | AS PER TENDER DOCUMENT | As per tender document | 92.40 | Rmt | 770.31 | 71176.62 |
| Providing specialized polysulphide sealant treatment to the expansion joints (Size : 25mm x 12mm) duly a].Chipping and removing of existing covering on expansion joints b]. Cleaning of the surface from dirt,dust and other contaminations c].Application of one coat of - High performance specially designed SBR latex polymer based bonding agent d]. Providing and application of Acrylic Polymer modified reinstatement concrete /mortar to the damaged edges of joint and making the groove. e]. Providing and fixing of masking tape on top of the joint both sides f]. Providing and fixing of Back up support material of Backer rod to leave the depth of 12mm on the joint g]. Providing and application of one coat of poly sulphide primer on inner edges of Joint. h]. Providing and application of Two part Poly sulphide sealant to a width of 25mm and 12mmdepth with putty knife and neat finish i]. Removing of masking tape and providing and application of two coats of Acrylic elastomeric cementitious coating. | ||||||
| 16 | AS PER TENDER DOCUMENT | As per tender document | 585.00 | sqm | 818.26 | 478679.31 |
| Vaccum dewatering cement concrete flooring 100 mm thick using M 20 grade design mix corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry in panels as per drawing / design (cutting grooves (at 3.0 x 3.0m of grid), cutting 6mm x 19mm grooves, laid to proper level and slope including consolidating with power driven mechanical vibrators (both needle & screed vibrators), dewatering by vacuum process "Tremix" method, floated with neat cement and power troweled to achieve smooth finishing, including MS Shuttering, finishing, rounding of the edges, filling the grooves with poly sulphide compound, curing including cost and conveyance of all materials like cement, coarse aggregate, sand etc., to site, seigniorage charges centering, shuttering, machine mixing, laying concrete, vibrating, curing, hire charges of all tools and plants, all other incidental and operational charges, labour charges and all taxes etc., complete for finished item of work but excluding cost of steel and its fabrication charges. | ||||||
| 17 | AS PER TENDER DOCUMENT | As per tender document | 218.80 | sqm | 476.00 | 104148.80 |
| Plastering 12mm thick in two coats with base coat of 16mm thick in CM(1:6) and top of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-Charge etc., complete for External & Uneven Surfaces of Brick Wall for finished item of work.(SS 901,903 &904). ii) Level - 2 | ||||||
| 18 | AS PER TENDER DOCUMENT | As per tender document | 338.40 | sqm | 435.00 | 147204.00 |
| Plastering 12mm thick in two coats with base coat of 16mm thick in CM(1:6) and top of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-Charge etc., complete for External & Uneven Surfaces of Brick Wall for finished item of work.(SS 901,903 &904). i) Level - I | ||||||
| 19 | AS PER TENDER DOCUMENT | As per tender document | 218.80 | sqm | 476.00 | 104148.80 |
| Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work "Internal Walls " ii) Level - 2 | ||||||
| 20 | AS PER TENDER DOCUMENT | As per tender document | 338.40 | sqm | 435.00 | 147204.00 |
| Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work "Internal Walls " i) Level - I | ||||||
| 21 | AS PER TENDER DOCUMENT | As per tender document | 19.78 | M.T. | 64590.00 | 1277692.90 |
| Providing HYSD bars of (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126) | ||||||
| 22 | AS PER TENDER DOCUMENT | As per tender document | 25.20 | cum | 7236.00 | 182347.20 |
| Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140) ii) Level - 2 | ||||||
| 23 | AS PER TENDER DOCUMENT | As per tender document | 68.10 | cum | 6802.00 | 463216.20 |
| Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140) i) Level - I | ||||||
| 24 | AS PER TENDER DOCUMENT | As per tender document | 876.80 | cum | 452.00 | 396313.60 |
| Filling with carted gravel in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operational,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for finished item of work(APSS NO.309&310) | ||||||
| 25 | AS PER TENDER DOCUMENT | As per tender document | 57.91 | cum | 45.00 | 2605.95 |
| Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for finished item of work (APSS NO.309&310) | ||||||
| 26 | AS PER TENDER DOCUMENT | As per tender document | 67.90 | sqm | 1017.00 | 69054.30 |
| Supply and placing of RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering platesetc., including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, overheads & contractors profit etc., etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (APSS No. 402) . for Sunshades | ||||||
| 27 | AS PER TENDER DOCUMENT | As per tender document | 1.10 | cum | 5525.85 | 6078.44 |
| Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for finished item of work. (APSS No. 402) for Bed Blocks | ||||||
| 28 | AS PER TENDER DOCUMENT | As per tender document | 142.60 | sqm | 2672.00 | 381027.20 |
| Providing Plinth protection 1.20m width along with drain constructed with 230 mm thick brick walls using common burnt clay bricks (23x11x7cm) over 100 mm thick over PCC(1:4:8) bed and plastering with CM (1:5) 12mm thick two coats for brick masonry drain and providing PCC(1:4:8) 100mm thick in between basement of the building and brick wall and 20mm thick granolithic concrete flooring with CC(1:1:2) prop. up to the edge of the brick masonry wall using 6mm to 12mm size graded hard granite machine crushed metal laid monolithically already laid, in alternate panels of size not exceeding 1.5 x 1.5 Mts. and providing 5mm thick glass strips between the pannels and finishing the top surface to required smoothness and slopes including grooves, thread lining as directed by the Engineer - in - charge including cost and conveyance of all materials to site, seigniorage charges, sales & other taxes on all materials and operational & incidental and labour charges like mixing of cement concrete, laying, curing, overheads & contractor profit etc., complete. | ||||||
| 29 | AS PER TENDER DOCUMENT | As per tender document | 114.60 | sqm | 1530.00 | 175338.00 |
| Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering platesetc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) . for Slabs. a. Rodent Proof (Rat protection) slab 100mm thick | ||||||
| 30 | AS PER TENDER DOCUMENT | As per tender document | 5.67 | cum | 12939.00 | 73387.42 |
| Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering platesetc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) . for Roof Beams. Level-4 | ||||||
| 31 | AS PER TENDER DOCUMENT | As per tender document | 11.92 | cum | 12444.00 | 148372.30 |
| Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering platesetc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) . for Roof Beams. Level -3 | ||||||
| 32 | AS PER TENDER DOCUMENT | As per tender document | 7.95 | cum | 11947.00 | 94964.31 |
| Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering platesetc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) . for Roof Beams. Level - 2 | ||||||
| 33 | AS PER TENDER DOCUMENT | As per tender document | 100.80 | cum | 5216.40 | 525812.84 |
| Plain Cement Concrete corresponding to M-15 grade as per IS 456 nominal mix using 40mm to 10mm size nominal machine crushed hard granite metal(coarse aggregate) from approved quarry including coat and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as mixing laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, for Machine mix PCC -M-15 MANUAL MIX for Bedblocks./ Retaining wall of compound wall. B.R.C.C. Wall (Retaining Wall) | ||||||
| 34 | AS PER TENDER DOCUMENT | As per tender document | 21.70 | cum | 12746.00 | 276588.20 |
| Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 330 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work. for Columns. i) Level - I | ||||||
| 35 | AS PER TENDER DOCUMENT | As per tender document | 11.00 | cum | 12287.00 | 135157.00 |
| Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) . for Plinth beams | ||||||
| 36 | AS PER TENDER DOCUMENT | As per tender document | 14.70 | cum | 9761.00 | 143486.27 |
| Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) . for Footings | ||||||
| 37 | AS PER TENDER DOCUMENT | As per tender document | 72.50 | cum | 3971.00 | 287897.50 |
| Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) | ||||||
| 38 | AS PER TENDER DOCUMENT | As per tender document | 135.10 | cum | 386.47 | 52212.10 |
| Earth work excavation for foundations (Manual Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work including seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
