Day To Day Requirements Of Sanitary , Hardware And Civil Items At Different Houses Of Hospitality And Protocol Department At Jammu Boq-2 PVC waste pipe 40mm 3 Sink waste 40mm 4 PVC waste pipe 32mm 5 CP basin waste 6 Syphon set 7 CP Toilet paper holder 8 PVC connection 24 9 PVC seat cover 10 Towel ring of required size 11 Brass spindle 12 PVC cistern (CERA) 13 CP angle valve (JAQUAR) 14 CP jet 15 CP wall mixer (JAQUAR) 16 Corner mirror shelve 17 CP Bib cock (JAQUAR) 18 Ball valve 25mm 19 Ball valve 20mm 20 Ball valve 15mm 21 Looking mirror (Ornamental) 22 Mirror shelve 23 CP sink cock (JAQUAR) 24 Brass Basin nut bolt 25 Concealed stop cock 26 CP extension nipple 50mm 27 PVC Handle set for cistern 28 PVC ball cock 29 CP grating centre hole 30 PVC urinal waste pipe 31 Wash Basin Bowel Type (HINDWARE/CERA) 32 CP Basin Mixer leg set 33 CP Wall Mixer leg set 34 English WC S-trap (HINDWARE) 35 M-seal 36 White Cement 37 NC putty 38 Soot gota 39 Over head shower arm 40 Over head shower 41 Blade 42 Teflon Tape 43 Motor excel jain with steel wire 44 Washer bib cock 45 Washer PVC connection 46 Washer mixer 47 PVC packing set for mortor 48 Chinese screw 40mm 49 Rawal plug 50 Chinese screw 75mm 51 Chinese screw 25mm 52 Elbow 40mm 53 Elbow 20mm 54 Union 40mm 55 Nipple 40mm 75 mm long 56 Union 20mm 57 Union 15mm 58 Plug 15mm 59 Plug 20mm 60 PVC waste pipe 35mm 61 Tee 20mm 62 Nipple 25mm 100mm long 63 Flange set 64 Foam insulation 32mm dia 65 Foam insulation 50mm dia 66 Elbow 15mm 67 Tee 15mm 68 Socket 15mm 69 CP nipple 15mm 2 long 70 CP nipple 15mm 3 long 71 Nipple 15mm 2 long 72 Socket 20mm 73 Elbow 20mm 74 GI Pipe 20mm dia 75 S/F of GI pipes and other fittings including necessary earth work for under ground and necessary cliffs for walls and celling surya prakash B- Grade make Pipes 75.1 1/2 dia 75.2 3/4 dia 75.3 1 dia 75.4 1-1/4 dia 75.5 1-1/2 dia 75.6 2 dia 75.7 3 dia 76 unions 76.1 1/2 dia 76.2 3/4 dia 76.3 1 dia 76.4 1-1/4 dia 76.5 1-1/2 dia 76.6 2 dia 76.7 3 dia 77 Tees 77.1 1/2 dia 77.2 3/4 dia 77.3 1 dia 77.4 1-1/4 dia 77.5 1-1/2 dia 77.6 2 dia 78 Elbows 78.1 1/2 dia 78.2 3/4 dia 78.3 1 dia 78.4 1-1/4 dia 78.5 1-1/2 dia 78.6 2 dia 79 Sockets 79.1 1/2 dia 79.2 3/4 dia 79.3 1 dia 79.4 1-1/4 dia 79.5 1-1/2 dia 79.6 2 dia 79.7 3 dia 80 Reducer Sockets 80.1 1/2 to 3/4 dia 80.2 1/2 to 1 dia 80.3 3/4 to 1 dia 81 Tanky nipples including making holes in tanks with coupling- heavy duty 81.1 1/2 dia 81.2 3/4 dia 81.3 1 dia 81.4 1-1/4 dia 81.5 1-1/2 dia 82 Clearance of manholes by way of removal of slush/human excreata etc. from manholes incl. disposal of same outside premises and clearance of connecting pipes incl. rodding, watering complete 83 Door Lock (Superior) 84 Multi purpose lock ( Standard Quality) 85 C.I Main hole cover 85.1 9 x 9 85.2 1 x 1 85.3 1 x 1-3 85.4 1 x 2 85.5 1-6 x 2 86 S/F of aluminum hardware fitting Handles 86.1 3 to 4 86.2 5 to 6 87 tower bolt 87.1 3 to 4 87.2 5 to 6 88 S/F of hyderaulic door closer incl. necessary serws etc. removal of damaged one (Heavy duty) 89 Door Hings 4 90 Door stopper 4 91 C.P Tower rod 24 92 CP long bend for cistern 93 PVC Pipe and fitting Prince B Grade 93.1 3 dia 93.2 4 dia 94 plain bend 94.1 3 dia 94.2 4 dia 95 Door Bend 95.1 3 dia 95.2 4 dia 95.3 P or Strap 4 95.4 Floor trap 3 96 P/F of 3.5mm thick glass panes in window/door incl. cost of beeding etc. 97 Brass spindle for conceled stop cock 98 S/F of CP Nipples (Parko/Jaquar/Mark) 98.1 1 long 98.2 2 long 98.3 3 long 99 P/L Double Chaged polished vitrified tiles laid on 20mm thick cement motor 1:4 incl. filling the joints with epoxy using spacer of kajaria/ somany 100 French spirit polishing 101 Acrylic Emulsion (Ultra HD) / Valvet Touch impression paint of nerolac/asian/dulex 102 providing and fixing flush doors with decorative laminition both side of brand lam, green lam. 103 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 104 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) 105 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 106 Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete 107 Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete 108 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) 109 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) 110 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class deodar wood 111 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars 112 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer 113 Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm) ncomplete 114 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm 115 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) 116 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. 117 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 118 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour Two coats 119 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick 120 Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in- Charge. 18 mm thick 121 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. 122 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. 123 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 124 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and nsimilar works. 125 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown 126 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm 127 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and ucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured. 128 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 129 10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With common burnt clay (non modular) brick tiles of class designation 10.0 130 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase. 131 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. 132 Finishing walls with textured exterior paint of required shade: Old work (two or more coats on existing cement paint surface applied @ 3.28 ltr/10sqm) 133 Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) 134 Supplying and stacking at site dump manure from approved source including carriage complete (manure measured in stacks will be reduced by 8% for payment) Screened through sieve of I.S. designation 20 mm 135 Mixing earth and sludge or manure in proportion specified or directed by officer in charge. 136 Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) In rows 15 cm apart in either direction 137 Finishing walls with Acrylic smooth exterior paint of required shade: Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface) 138 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 139 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) 140 Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level 141 S/F Presure pump 1 HP Make Sharp 142 S/F Presure pump 2 HP Make Sharp 143 Engaging Plumber for repair/ tighteing of sanitry fitting 144 Engaging carpanter for easing of door and windows 145 Labour 146 Mason 147 P/F of automatic censor door with all installation and accessories of daroma/ Ozon, toughned glass of saint gobain complete. 148 Repair of automatic censor door with all installation and accessories of daroma/ Ozon, toughned glass of saint gobain complete. 149 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 150 Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Dark shade using ordinary cement 151 Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG- 30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity 152 Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On W.B.M. @ 0.75 Kg/sqm.
