E1-Sc-5326-2020 . Erode Smart City Limited . 1 ) Construction Of Green Building For Iccc At Corporation Office Premises Construction Of Green Building For Iccc At Corporation Office Premises
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Jan 2021
0 days left
EMD
4.66 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Erode Smart City Limited → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
E1-Sc-5326-2020 . Erode Smart City Limited . 1 ) Construction Of Green Building For Iccc At Corporation Office Premises Construction Of Green Building For Iccc At Corporation Office Premises
BOQ
| Name of Work: Construction of Green Building for ICCC at Corporation office premises | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing, driving and installing Driven cast-in-situ reinforced cement concrete Piles of specified diameter and length below the Pile cap in cement concrete M25 Grade to carry safe Single end bearing pile 450mm dia Boring, than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc., allcomplete. (Length of pile for paymentshall be measured from top of shoe to the bottom of pile cap). | 680 | Rm | |
| 2 | 2 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum | |||
| 3 | 2.01 | A) ORDINARY SOIL (SS20B) Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth (SS20B) | |||
| 4 | 2.02 | Footing | 172 | M3 | |
| 5 | 2.03 | Grade Beam | 58 | M3 | |
| 6 | 3 | Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. | 60 | M3 | |
| 7 | 4 | Plain Cement Concrete 1:4:8 (one cement four sand and eight coarse aggregates) using 40mm size ISS HBG metal ( cement grade shall be 53 grade) including cost and conveyance of all materials to site and including for the mixing, laying,curing and labour charges and all incidential charges such as water providing etc., complete as per standard specification | 70.0043 | M3 | |
| 8 | 5 | Providing and laying in position standardised concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture ( Placticiser / super plasticiser ) in recommended . proportions as per IS 9103 to accelerate, related setting of concrete,improve workability without imparing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156Kg of 10-12mm machine crushed stone jelly | |||
| 9 | 5.01 | and with about (4.79cum) 7670 Kg of sand , but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying,vibrating with mechanical vibrators,finishing,curing,etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specificatin and as directed by the departmental officers -the coarse and Fine aggregates to be used should comply with the requirements of IS standards.(No separate payment will be made by the Department for the excess usage of materials) | 100.002 | M3 | |
| 10 | 6 | Plain Cement Concrete 1:2:4 (one cement, two Sand and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification | 12.9969 | M3 | |
| 11 | 7 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) | |||
| 12 | 7.01 | A) Grade beam and Footing | 360.003 | M2 | |
| 13 | 8 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) | |||
| 14 | 8.01 | A) RCC Roof Slab, Beam , Lintel and Sunshade Slab | |||
| 15 | 8.02 | 1) Up to 5M-6M height from FL | 735 | M2 | |
| 16 | 8.03 | 2) Up to 4M-4.50M height from FL | 1470 | M2 | |
| 17 | 8.04 | 3) Up to 3.00m height from FL | 260 | M2 | |
| 18 | 8.05 | B) Rectangular and Squre Column | |||
| 19 | 8.06 | 1) Up to 3.00 M Height | 364.999 | M2 | |
| 20 | 8.07 | 2) Up to 3.00m to 4.00m Height From FL | 97 | M2 | |
| 21 | 8.08 | 3) Up to 4.00m to 5.00m Height From FL | 55 | M2 | |
| 22 | 8.09 | 4) Up to 5.00m to 6.00m Height From FL | 20 | M2 | |
| 23 | 8.1 | C) Vertical wall Surface With Strutting | |||
| 24 | 8.11 | 1) Up to 3.00 M Height | 310 | M2 | |
| 25 | 8.12 | 2) Up to 3.00m to 4.00m Height From FL | 90 | M2 | |
| 26 | 8.13 | 3) Up to 4.00m to 5.00m Height From FL | 60 | M2 | |
| 27 | 8.14 | 4) Up to 5.00m to 6.00m Height From FL | 25 | M2 | |
| 28 | 9 | Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum ( cement grade shall be 53) and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone | |||
| 29 | 9.01 | jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) | |||
| 30 | 9.02 | a) Up to 4.50m Depth From G.L | 90 | M3 | |
| 31 | 9.03 | b) Ground Floor Up to 4.50m Height From G.L | 150.999 | M3 | |
| 32 | 9.04 | c) First Floor | 139.998 | M3 | |
| 33 | 9.05 | d) Second Floor | 139.998 | M3 | |
| 34 | 9.06 | e) Thired Floor | 15 | M3 | |
| 35 | 10 | Supplying, fabricating and placing in position Ribbed Tor Steel / TMT bars FE 500 for all RCC works as per design given including cost of steel and binding wire in all floors etc. complete complying with standard specification. | 85 | MT | |
| 36 | 11 | Brick work in CM 1:5 (one cement & five sand) using IInd class ground moulded country bricks of size 9\"X 4 3/8\" x 2 3/4\" including finishing, curing, etc., complete complying with standard specification. | |||
| 37 | 11.01 | a) Ground Floor Up to 4.50M Height | 43.9992 | M3 | |
| 38 | 11.02 | a) First Floor | 96.0042 | M3 | |
| 39 | 11.03 | c) Second Floor | 96.0042 | M3 | |
| 40 | 11.04 | d) Third Floor | 42.9966 | M3 | |
| 41 | 12 | Brick Partition Walls using II class ground moulded chamber bricks of size 9\"X43/8\"X 3/4\" in C.M 1:3 using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification | |||
| 42 | 12.01 | a) FIrst Floor | 67 | M2 | |
| 43 | 12.02 | b) Second Floor | 67 | M2 | |
| 44 | 13 | Supplying and fixing door shutters of Medium density MDF board of exterior grade 35mm thick conforming to IS 12406/1989 with 35x12mm TW lapping on all edges with necessary adhesives and CP screws complying with standard specification . The rate is inclusive of three coat of best quality varnish and cost of furniture fittings such as 300mm tower 2 No 200mm tower bolt 1 No, 150mm aldrop Aluminium handle ornamental type 2 No and 1 No door stopper and necessary hinges etc., complete . | 47 | M2 | |
| 45 | 14 | Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock | |||
| 46 | 14.01 | rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter and should have provision to fix aldrops, tower bolt hinges and lock plates inclusive of cost of all materials etc complete complying with thew standard specifications | 28 | M2 | |
| 47 | 15 | UPVC Window\nSpecification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or | |||
| 48 | 15.01 | brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work | 115 | M2 | |
| 49 | 16 | UPVC Ventilator\nSpecification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window | |||
| 50 | 16.01 | should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work. | 5 | M2 | |
| 51 | 17 | Paving the floor with Double charged Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the partmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work | 704.997 | M2 | |
| 52 | 18 | Supplying and laying in flooring with fully polished (otherthan jet Black) colour Granite stone of 20mm thick (average) of 4' X 2' in size laid over base layer of cementmortar 1:3 (one cement and three sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers | 329.998 | M2 | |
| 53 | 19 | Granite Nosing for Steps/Platform of full round with smooth finishing including cost of labour, machinery etc., complete. | 290 | Rm | |
| 54 | 20 | Dadooing walls with designed colour Glazed ties of size 300mmx200mmx6mm best approved quality, colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two Sand ) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sqm neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. | 254.997 | M2 | |
| 55 | 21 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement | 55.001 | M2 | |
| 56 | 22 | Special ceiling Plastering with Cement Mortar 1:3 (One Cement and three Sand ) 10mm thick( cement grade shall be 53 grade) including finishing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. | 2770 | M2 | |
| 57 | 23 | Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete. | 94.9992 | M2 | |
| 58 | 24 | Plastering with Cement Mortar 1:5 (One Cement andFive Sand ) 12mm thick including finishing, curing, etc., complete For Walls in all floors complying with standard specification and as directed by the departmental officers. | 2260 | M2 | |
| 59 | 25 | Painting the wall with Texture Finish Paint including Cost of all labour charges Including cost of all material to site and Design and Colour approved by Departmental officers etc complete | 505 | M2 | |
| 60 | 26 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. | 5035 | M2 | |
| 61 | 27 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. (The make, quality and colour of paint | 114 | M2 | |
| 62 | 28 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete | 54 | M2 | |
| 63 | 29 | Supplying and fixing of MS grill of approved design for sit out and windows of approved design using MS angle and MS flats including cost of all materials, welding charges, CC charges, transporting, etc., complete including two coats of enamel paint over one coat of steel primer. | 2900 | Kg | |
| 64 | 30 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the departmental officers. | 35.999 | m3 | |
| 65 | 31 | Finishing the top of roof with one course of machine pressed tiles of size 200mm x 200mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand ) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers | 445 | M2 | |
| 66 | 32 | Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with Sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibrating the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. | 750 | M2 | |
| 67 | 33 | Supplying and Installing Metal False Ceiling using Fire Retardant Galvanized Steel Sheet Plain lay in tile size 600mm x 600mm, 0.5mm thick, powder coated on external surface and shall have flange on all four sides to rest on the exposed grids. The system to give 600mm x 600mm centre to centre 'T'. The 'T' shall be not be dipped GI Tee Section 3600mm long main Tee. 24mm wide and cross Tee panels are formed by running main runner of 'T' section of size 30mm x 24mm powder coated at bottom at intervals with powder coating at bottom. Necessary provision of inter locking of 'T' section are made at required intervals not | |||
| 68 | 33.01 | exceeding 1200mm. The main runners are suspended from the ceiling by means of 4mm dia. GI rods fixed to the ceiling using anchor fasteners of 50mm x 8mm size with nylon inset and hooked to the main rubbers using clips. The last hangers at end of each rubber should not be greater than 600mm from the adjacent wall. The last panel shall be placed at the side wall using edge profile 'L' Angle of size 20mm x 20mm and fixed to the side wall the false ceiling should be fixed of same level and should present a neat look | 650 | M2 | |
| 69 | 34 | MODULAR PARTITION – 50mm thick : Fabricated out of exclusion Aluminum sections with the following Specifications, (a) All the aluminum sections will be of 1.8mm to 2mm thick i.e., depends on the load bearing requirement. (b) The top cover & end cover will be of 50mm breadth. (c) The electrical raceway cover will be of 10mm width & 9mm thick pre laminated / laminated particle board. (d) The tile will be provided on both sides of the frame. The tiles are fabricated out of 9mm thick pre laminated board for tiles &MDF board for white marker board & Magnetic fabric board. (e) The two way, three way & four way pillars will be fabricated out of 2mm thick, 50mm, Square Aluminum sections. (f) All the frames will be connected using bolt & nuts. (g) All the Aluminum sections will be duly power coated in approved shaded after necessary treatment. | |||
| 70 | 34.01 | way & four way pillars will be fabricated out of 2mm thick, 50mm, Square Aluminum sections. (f) All the frames will be connected using bolt & nuts. (g) All the Aluminum sections will be duly power coated in approved shaded after necessary treatment. | 211 | M2 | |
| 71 | 35 | Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x .50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and eights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick | |||
| 72 | 35.01 | ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with pacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or quivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer | 255.001 | M2 | |
| 73 | 36 | Designing the Semi Unitised Structural Glazing System with open groove joint as per esign intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept. Officials.) Design the framing system (i.e. male & Female frame) to support vision panels, spandrel panels either with glass or aluminium composite\npanel, openable, window panels on a continuous framing supported between floors. Also design the split framing | |||
| 74 | 36.01 | glazing system in case of strip or punched windows\nwith vision panel proposed with either insulated / Monolithic glass, groove width in the system both in horizontal and vertical shall not be more than 20mm. Glazing of panel shall\nbe done only at factory at the controlled atmosphere | 40 | M2 | |
| 75 | 37 | Water Supply and Sanitary Arrangements: | |||
| 76 | 37.01 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \"U\" clamp at the centre of the pipe line in addition to those for more than 3.0 meter pipe length, etc., complete complying with standard specification. | |||
| 77 | 37.02 | a) 110mm dia PVC Pipe | 124 | RM | |
| 78 | 38 | Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. | |||
| 79 | 38.01 | a) 160mm dia pipe above ground level | 123 | Rm | |
| 80 | 38.02 | b) 110mm dia pipe above ground level | 52 | Rm | |
| 81 | 38.03 | c)75mm dia pipe above ground level (Waste Water) | 40 | Rm | |
| 82 | 39 | Supplying and fixing of 2000 liters capacity HDPE PVC Water tank of approved quality( White /Blue Colour) including cost of inlet , outlet and scour connection arrangement including cost of all materials to site and fixing in postion etc complete. | 2 | Nos | |
| 83 | 40 | Supplying, laying and jointing UPVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for residential and homeapplications, water pressure in residential areas do not normally exceed the maximum tolerance. (Schedule-40) of approved quality and best Quality of pipe of the following dia including labour fixing UPVC Specials, (excluding charges for cutting and threading of pipes, cost of such specials) to wall with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc., making holes on the walls (or) drilling holes in roof and making good the dismantled portions to original condition with necessary | |||
| 84 | 40.01 | brick work / concrete and plastering wherever necessry with necessary scaffolding charges. The pipes are to be painted with the 2 coats of good variety and approved best quality of synthetic enamel paint over a priming coat of red oxide etc., complete in all floors complying with standard specification. G.I. pipes shall be got approved by the Executive Engineer before use on works. | |||
| 85 | 40.02 | a) 40mm dia UPVC Pipe | 50 | Rm | |
| 86 | 40.03 | b) 50mm dia UPVC Pipe | 75 | Rm | |
| 87 | 40.04 | c) 32mm dia- UPVC Pipe | 20 | Rm | |
| 88 | 40.05 | e) 20mm dia-UPVC Pipe | 15 | Rm | |
| 89 | 40.06 | f) 15mm dia UPVC Pipe | 10 | Rm | |
| 90 | 41 | Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements | |||
| 91 | 41.01 | a) 40mm Gun metal Gate Valve | 6 | Rm | |
| 92 | 41.02 | b) 50mm Gun metal Gate Valve | 8 | Rm | |
| 93 | 42 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) | |||
| 94 | 42.01 | a) SD Tap | 20 | No | |
| 95 | 42.02 | b) Pillar Tap | 8 | No | |
| 96 | 43 | Supplying and fixing in position the following UPVC Specials of heavy type and approved quality and good variety excluding fixing charges but including necessary cutting and threading of UPVC pipes, jointing the UPVCI specials and painting with two coats with good variety and best quality synthetic enamel paint over a coat of red oxide primer and jointing the specials with pipe line using shellac etc., complete complying with standard specification. (The UPVC specials should be got approved by the Executive Engineer concerned before use on works.) | |||
| 97 | 43.01 | a) UPVC-Union | |||
| 98 | 43.02 | 1) 40mm dia | 15 | Nos | |
| 99 | 43.03 | 2) 50mm dia | 12 | Nos | |
| 100 | 43.04 | 3) 32mm dia | 15 | Nos | |
| 101 | 43.05 | 4) 20mm dia | 10 | Nos | |
| 102 | 43.06 | b) UPVC-Elbow | |||
| 103 | 43.07 | 1) 40mm dia | 15 | Nos | |
| 104 | 43.08 | 2) 50mm dia | 25 | Nos | |
| 105 | 43.09 | 3) 32mm dia | 15 | Nos | |
| 106 | 43.1 | 4) 20mm dia | 15 | Nos | |
| 107 | 43.11 | c) UPVC- Bend | |||
| 108 | 43.12 | 1) 40mm dia | 10 | Nos | |
| 109 | 43.13 | 2) 50mm dia | 10 | Nos | |
| 110 | 43.14 | 3) 32mm dia | 5 | Nos | |
| 111 | 43.15 | 4) 20mm dia | 15 | Nos | |
| 112 | 43.16 | d) UPVC- Tee | |||
| 113 | 43.17 | 1) 40mm dia | 5 | Nos | |
| 114 | 43.18 | 2) 50mm dia | 5 | Nos | |
| 115 | 43.19 | 3) 32mm dia | 10 | Nos | |
| 116 | 43.2 | 4) 20mm dia | 10 | Nos | |
| 117 | 43.21 | e) UPVC - Coupling | |||
| 118 | 43.22 | 1) 40mm dia | 10 | Nos | |
| 119 | 43.23 | 2) 50mm dia | 15 | Nos | |
| 120 | 43.24 | 3) 32mm dia | 10 | Nos | |
| 121 | 43.25 | 4) 20mm dia | 15 | Nos | |
| 122 | 43.26 | f) UPVC- Reducer | |||
| 123 | 43.27 | 1) 50 x 40 mm dia | 12 | Nos | |
| 124 | 43.28 | 2) 40 x 32 mm dia | 10 | Nos | |
| 125 | 43.29 | 3) 32 x 20 mm dia | 15 | Nos | |
| 126 | 43.3 | 4) 20x15mm dia | 10 | Nos | |
| 127 | 43.31 | g) UPVC- Reducer Elbow | |||
| 128 | 43.32 | 1) 50 x 40 mm dia | 12 | Nos | |
| 129 | 43.33 | 2) 40 x 32 mm dia | 10 | Nos | |
| 130 | 43.34 | 4) 32 x 20 mm dia | 15 | Nos | |
| 131 | 43.35 | h) UPVC- Reducer Tee | |||
| 132 | 43.36 | 1) 50 x 40 mm dia | 12 | Nos | |
| 133 | 43.37 | 2) 40 x 32 mm dia | 10 | Nos | |
| 134 | 43.38 | 3) 32 x 20 mm dia | 15 | Nos | |
| 135 | 43.39 | i) UPVC- Hex Nipple | |||
| 136 | 43.4 | 1) 50mm dia | 12 | Nos | |
| 137 | 43.41 | 2) 40mm dia | 10 | Nos | |
| 138 | 43.42 | 3) 32mm dia | 15 | Nos | |
| 139 | 44 | Internal Water Supply Arrangements using PVC Pipes and Specials: | |||
| 140 | 44.01 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. | |||
| 141 | 44.02 | A) 25mm dia | 50 | Rm | |
| 142 | 44.03 | B) 32mm dia | 50 | Rm | |
| 143 | 44.04 | C) 40mm dia | 40 | Rm | |
| 144 | 45 | Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements | |||
| 145 | 45.01 | A) PVC Coupler | |||
| 146 | 45.02 | 1) 25mm dia | 7 | Nos | |
| 147 | 45.03 | 2) 32mm dia | 7 | Nos | |
| 148 | 45.04 | 3) 40mm dia | 7 | Nos | |
| 149 | 45.05 | B) PVC Elbow | |||
| 150 | 45.06 | 1) 25mm dia | 7 | Nos | |
| 151 | 45.07 | 2) 32mm dia | 7 | Nos | |
| 152 | 45.08 | 3) 40mm dia | 7 | Nos | |
| 153 | 45.09 | C) PVC Bend | |||
| 154 | 45.1 | 1) 25mm dia | 7 | Nos | |
| 155 | 45.11 | 2) 32mm dia | 7 | Nos | |
| 156 | 45.12 | 3) 40mm dia | 7 | Nos | |
| 157 | 45.13 | 4) PVC Tee | |||
| 158 | 45.14 | 1) 25mm dia | 7 | Nos | |
| 159 | 45.15 | 2) 32mm dia | 7 | Nos | |
| 160 | 45.16 | 3) 40mm dia | 7 | Nos | |
| 161 | 45.17 | 5) PVC End Cap | |||
| 162 | 45.18 | 1) 25mm dia | 5 | Nos | |
| 163 | 45.19 | 2) 32mm dia | 5 | Nos | |
| 164 | 45.2 | 3) 40mm dia | 5 | Nos | |
| 165 | 45.21 | 6) PVC Reducer | |||
| 166 | 45.22 | 1) 25mmx20mm | 5 | Nos | |
| 167 | 45.23 | 2) 32mmx25mm | 5 | Nos | |
| 168 | 45.24 | 3) 40mmx32mm | 5 | Nos | |
| 169 | 45.25 | 7) PVC Reducer Tee | |||
| 170 | 45.26 | 1) 25mmx20mm | 5 | Nos | |
| 171 | 45.27 | 2) 32mmx25mm | 5 | Nos | |
| 172 | 45.28 | 3) 40mmx32mm | 5 | Nos | |
| 173 | 45.29 | 8) PVC Reducer Elbow | |||
| 174 | 45.3 | 1) 25mmx20mm | 5 | Nos | |
| 175 | 45.31 | 2) 32mmx25mm | 5 | Nos | |
| 176 | 45.32 | 3) 40mmx32mm | 5 | Nos | |
| 177 | 46 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). | |||
| 178 | 46.01 | A) PVC Elbow | |||
| 179 | 46.02 | 1) 160mm dia | 6 | Nos | |
| 180 | 46.03 | 2) 110mm dia | 4 | Nos | |
| 181 | 46.04 | 3) 90mm dia | 5 | Nos | |
| 182 | 46.05 | B)PVC Elbow with Door | |||
| 183 | 46.06 | 1) 160mm dia | 10 | Nos | |
| 184 | 46.07 | 2) 110mm dia | 7 | Nos | |
| 185 | 46.08 | 3) 90mm dia | 8 | Nos | |
| 186 | 46.09 | C) PVC Tee | |||
| 187 | 46.1 | 1) 160mm dia | 10 | Nos | |
| 188 | 46.11 | 2) 110mm dia | 7 | Nos | |
| 189 | 46.12 | 3) 90mm dia | 8 | Nos | |
| 190 | 46.13 | D) PVC Tee with Single Door | |||
| 191 | 46.14 | 1) 160mm dia | 5 | Nos | |
| 192 | 46.15 | 2) 110mm dia | 5 | Nos | |
| 193 | 46.16 | 3) 90mm dia | 5 | Nos | |
| 194 | 46.17 | E) PVC Tee with Double Door | |||
| 195 | 46.18 | 1) 160mm dia | 5 | Nos | |
| 196 | 46.19 | 2) 110mm dia | 5 | Nos | |
| 197 | 46.2 | 3) 90mm dia | 2 | Nos | |
| 198 | 46.21 | F) PVC Bend | |||
| 199 | 46.22 | 1) 160mm dia | 4 | Nos | |
| 200 | 46.23 | 2) 110mm dia | 3 | Nos | |
| 201 | 46.24 | 3) 75mm dia | 2 | Nos | |
| 202 | 46.25 | G)PVC \"Y\" | |||
| 203 | 46.26 | 1) 160mm dia | 5 | Nos | |
| 204 | 46.27 | 2) 110mm dia | 5 | Nos | |
| 205 | 46.28 | 3) 75mm dia | 2 | Nos | |
| 206 | 46.29 | H)PVC \"Y\" with Single Door | |||
| 207 | 46.3 | 1) 160mm dia | 2 | Nos | |
| 208 | 46.31 | 2) 110mm dia | 3 | Nos | |
| 209 | 46.32 | 3) 75mm dia | 2 | Nos | |
| 210 | 46.33 | I) PVC \"Y\" with Double Door | |||
| 211 | 46.34 | 1) 160mm dia | 2 | Nos | |
| 212 | 46.35 | 2) 110mm dia | 3 | Nos | |
| 213 | 46.36 | 3) 75mm dia | 2 | Nos | |
| 214 | 47 | Supplying and fixing in position PVC 4 way junction plain or with door of various dia of best approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). | |||
| 215 | 47.01 | PVC Double Tee with Single Door\n(4 way junction) | |||
| 216 | 47.02 | 1) 160mm dia | 2 | Nos | |
| 217 | 47.03 | 2) 110mm dia | 2 | Nos | |
| 218 | 47.04 | 3) 75mm dia | 2 | Nos | |
| 219 | 47.05 | PVC Double \"Y\" with Single Door\n(4 way junction) | |||
| 220 | 47.06 | 1) 160mm dia | 2 | Nos | |
| 221 | 47.07 | 2) 110mm dia | 2 | Nos | |
| 222 | 47.08 | 3) 75mm dia | 2 | Nos | |
| 223 | 47.09 | PVC Cowl | |||
| 224 | 47.1 | 1) 110mm dia | 2 | Nos | |
| 225 | 47.11 | 2) 75mm dia | 2 | Nos | |
| 226 | 47.12 | 3)50mm dia | 2 | Nos | |
| 227 | 48 | Supplying and fixing in position Indian make bewelled edge mirror of size 600 x 450mm quality including cost of Rawal plugs, brass screws. etc. complying with standard specification. | 6 | Nos | |
| 228 | 49 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm \"P\" or \"S\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings. | |||
| 229 | 49.01 | White EWC | 8 | Nos | |
| 230 | 50 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers | 4 | Nos | |
| 231 | 51 | Supply and fixing in position of best Indian make white / colour glazed earthenware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 No., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masonry and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide | |||
| 232 | 51.01 | primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.) | |||
| 233 | 51.02 | White glazed earthernwere lipped mouth flat back urinal | 4 | No | |
| 234 | 52 | Supplying and fixing position PVC Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of Sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three Sand ) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) | |||
| 235 | 52.01 | Nahani Trap of size 100 x 75mm with stainless steel gratings | 18 | Nos | |
| 236 | 53 | Supplying and fixing in position 150 x 100mm \"P\" or \"S\" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three Sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly | |||
| 237 | 53.01 | for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works. | 6 | Nos | |
| 238 | 54 | Construction of Inspection chambers of following sizes with earth work excavation for foundations, C.C 1:4:8 using 40mm HBGS jelly for foundation and brick work in CM 1:5 using country bricks 8 3/4\" x 4 1/4\" x 2 3/4 \", inside plastering with CM 1:3 12mm thick, inside channeling with brick work, outside plastering with C.M 1:5 12mm thick, R.C.C precast cover slab 75mm thick using M20using 20mm blue granite jelly with necessary reinforcement etc complete as directed by the departmental officers | |||
| 239 | 54.01 | Inspection chamber - 0.60 x 0.60m ( inside opening ) Upto 1m height Data Manhole | 10 | No | |
| 240 | 55 | Providing rain water harvesting using 3 No.of RCC well rings of 90cm inner dia (clear) with 5cm wall thickness made out of cement concrete 1:2:4 using 20mm hard broken jelly to a height of 30cm each supplying and fabricating 16 No. of 6mm dia MS rod vertically and 3 No. of 6mm dia MS rod circumferentially tied together with 18 guage binding wire for well rings including necessary earth work excavation 1m dia to a depth of 1m, supplying and filling 40mm HBG inside the erected well ring to a depth of 90cm, and top covered with RCC circular perforated cover slab of 1m dia and 5cm thick which inclusive of cost and fabrication of 6mm M.S reinforcement at 15 cm spacings on both directions and one 6mm M.S rod ties at the edge of the slab circumferentially including | |||
| 241 | 55.01 | cost of moulding, curing, finishing and well placing in position and disposing off excavated earth with all initial leads and lifts in places as shown by the Departmental officers etc., complete in all respects. | 8 | No | |
| 242 | 56 | ELECTRICAL ITEMS: | |||
| 243 | 56.01 | Supply and fixing 16amps DP switch with metal clad(side handle) of 500 V with F & N on suitable teak wood Board of size 30cmx20cmx6 cm including necessary internal conection,earth connection etc.,complete (SD 141) | 10 | No | |
| 244 | 57 | Earthling as per ISI Specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm and with 20mm dia copper earth flat of size 125mm 50mmx6mm,with funneling arrangement using charcoal, common salt, G.I.reducer, check nuts etc., and sonry work and providing RCC cover slab 38mm thick for the Brick masonry including ost of steel and fabrication of reinforcement etc., complete in all respects as directed by the departmental officers.(SD 233) | 4 | No | |
| 245 | 58 | Supplying and run off 8 SWG copper wire on walls or below ground level with necessary 'U' nails, earth work excavation and refilling & including the cost of all materials etc., complete in all respects as directed by the departmental officers. (SD 74) | 100 | RM | |
| 246 | 59 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (like standard make) (SD 167)\n | 7 | No | |
| 247 | 60 | Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door (metal) with 40A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make) SD 179 | 5 | No | |
| 248 | 61 | Supplying and fixing of 5 A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch concealed in suitable MS box in flush with wall and covered with 3mm thick hylem sheet including cost of wall socket, switch and labour charges fo wall cutting, grouting, flushing and making good, painting with primary and finishing coat for MS box etc., complete as directed by the departmental officers. (SD 135) | 12 | No | |
| 249 | 62 | Supplying and fixing of 5A/15A 3 pin flush type wall socket with15A flush type switch concealed in suitable MS box in flush with wall and covered with 3mm thick hylem sheet including cost of wall socket, switch and labour charges of wall cutting, grouting, flushing and making good, painting with primary and finishing coat for MS box etc., complete as directed by the departmental officers. (SD 138) | 12 | No | |
| 250 | 63 | Supply and fixing of 20 Amp DP Plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For A.C Plug) (Legrand (MDS/Hager (L & T make) SD 140 | 8 | No | |
| 251 | 64 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC cessoires with TW switch box and 5A FT switch in flush with wall with 3mm thick hylum sheet cover or making good of the concealed portion with suitable colour for PVC concealed light oint / fan point (for electronic regulator) (SD 24) | 184 | Point | |
| 252 | 65 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of theconcealed portion with suitable colour for concealed PVC plug point. (SD 38) | 50 | Nos | |
| 253 | 66 | Supply and run of 2 of 2.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and makinggood of the concealed portion with suitable colour \n | 1400 | RM | |
| 254 | 67 | Supply and run off 2 of 4 sqmm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark confirming to IS:694/1990 with continious earth connection by means of 1.50 sqm PVC insulated single core unsheathed copper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departemental officers. ( SD 57) | 1400 | RM | |
| 255 | 68 | Wiring with 3 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylem sheet covered TW switch box and 5A FT switch (two way) with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed staircase light point (SD 31) | 16 | Nos | |
| 256 | 69 | Supplying and fixing 12\" (30cm dia) light duty Exhaust fan including cost of all materials,labour, lead, lift, etc complete (SD 114) | 12 | No | |
| 257 | 70 | Supply and fixing of 18W street LED (Philips/Havells) complete with T.W round blocks on wall or ceiling with flu tube with PVC unsheather copper leads from terminals to the filling | 55 | No | |
| 258 | 71 | Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection with 1.5 sqmm PVC unsheadthed Cu. cable and making good of the concealed portion, with suitable colour for concealed power plug point (SD 40) | 20 | Nos | |
| 259 | 72 | Supply and clarnping of 2 x 16 sq.mm. PVC LTUG armoured aluminium cable on post or on wall with MS clamps(SD-217) | 20 | RM | |
| 260 | 73 | Supply and clarnping of 3.5 x 25 sq.mm. PVC LTUG armoured aluminium cable on post or on wall with MS clamps. (SD 222) | 90 | RM | |
| 261 | 74 | Supply and clarnping of 3.5 x 50 sq.mm. PVC LTUG armoured aluminium cable on post or on wall with MS clamps (SD224) | 60 | RM | |
| 262 | 75 | Supply and clarnping of 2 x 120 sq.mm. PVC LTUG armoured aluminium cable on post or on wall with MS clamps SD 226\n | 200 | RM | |
| 263 | 76 | Supply delivery erection ,testing and commisioning of 100KVA capacity Deisel Generator with AMF Panel set 3 ph, 50 Hz,415 V, consisting of deisel engine capable of delivering continuous brake horse power with standard fittings,water cooled radiators,acoustic closureto restrict the noice level as per the KPCB norms,residential silencer with exhaut pipe arrangement (insulated with glass wool imside thwe building ) upto outside of the roomabove roof level,suitable alternator (brushless),self excited,self regulated, suitable for continuous operation .Standard cntrol panel, consisting of ameter with CTs | |||
| 264 | 76.01 | and selector switch, Voltmeter with selector switch, MCCB, energmeter,earth fault relay,indicating lamps,fuses and required1.1 KV grade PVC armouredaluminium cable from alternaor to alternator control panel, 12/24 Vbattery, batteryleads, battery chrger ..etc. Coupling with gaurd ,fuel tank (8Hrs. capacity) common rigid MS channel baseframe, antivibration mounting pad etc ..complete with synchornised panel including all accessories items with exhaust ppipe with silencer (ANNEXURE XIV 5 c) | 1 | nos | |
| 265 | 77 | Supply and erection of 8 persons carrying capacity of passenger lift of car inner size 1300 X 1100mm for Ground+ 2 Floors (3Floors) (ie) 20m travel height with a speed of 1.00Mtr per second with ARD , the entrance will be on front side only and Entrances on each floor, without machine room and gear less operation and the lift well size is 1900 X 2100mm and with 1 No of Circular fan, LED Light fittings. The landing entrance opening with sliding Door and made up of Stainless Steel SS 304 Grade Hairline finish. The Lift make will be of Johnson / Kone / OTIS / Equivalent. (PWD SOR-XIV-7B) | 2 | Nos | |
| 266 | 78 | Supply and fixing of 12 way three phase MCB sheet steel distrubution board flush type fitting with bus bars and neutral links with outgoings and separate 4 way provision for accomodating one number four pole incoming MCB / isolated and another separate four way for one number four pole ELCB RCD with provision for taking upcable for not lessthan 35 sqmm etc .complete. | 3 | Nos | |
| 267 | 79 | Supply and fixing of 3 way single pole and neutral MCB sheet steel enclosure Distribution board with Doubie door(Metai) 1N0 32 Amps DP MCB as incoming and 6 Nos. 6 Amps to 32 Amps SPMCB outgoing in ?ush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Standard make) (SD 167) | 8 | Nos | |
| 268 | 80 | Suplying and fixing of ladder,perforated cable trays with necessary cross arms and supports inclduing cost of material, labour lead,lift etc., as per specification . | |||
| 269 | 80.01 | 150mm wide 50mm depth | 30 | Rm | |
| 270 | 80.02 | 300mm wide 50mm depth | 30 | RM | |
| 271 | 81 | Design, supply, installation, Testing and Commissioning inclusive of five years comprehensive operation and maintenanceof Solar On Grid Rooftop PV System as per technical specifications enclosed \n | 25 | Kwp | |
| 272 | 82 | Supplying and fixing the finest quality Cat Cables. These cables are mainly used for network such as television and telephone cables. In adherence to set industry standards, these cables are manufactured using top quality raw material and newest technology. | 250 | RM | |
| 273 | 83 | Supplying and erecting in position of 250 liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two \n | |||
| 274 | 83.01 | Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. | 1 | Nos | |
| 275 | 84 | LIGHTENING ROD | |||
| 276 | 84.01 | A) Supply of Early Streamer Emission Air Terminal (ESEAT). Model: L The ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere. The Air terminal is non-adioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required), collects energy from the ambient electric field.The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time (?Ts) obtained during the lab test for the offered model is 60 µs. The ESEAT works on negative as well as positively polarized discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). A dedicated tester is avilable to test the healthiness of the ESEAT on request (Page No. 37, Point No. 3 of Clause .6 of the Revised NFC 17-102 version 2011 ). ESEAT Model : L - Radius of protection : 86 MetresLevel of protection considered for the Project-II level(SOR 2020-21Pg.no -147 3.a) | 1 | No | |
| 277 | 84.02 | B) MOUNTING STRUCTURE: Supply of Standard / Speciat Moun 4.5 mts. pipe, and 300 x 300 x Bmm MS plate, 3 mts. 48mm OD class C GI outer Pipe, 1.8 mtr,38mm OD inner PiPe, for roof mounting on concrete base and with FRp adapter. | 1 | No | |
| 278 | 84.03 | C) DOWN CONDUCTOR: Supply and run of 25mm x 6mm with necessary clamps / supports for earth connection ( | 30 | RM | |
| 279 | 84.04 | D) TEST LINK :\n Supply of Test Link Box for each Down conductor In order to disconnect the earth termination system to enable measurementof resistance( | 1 | No | |
| 280 | 84.05 | E) EARTH ELECTRODE : Supply and insallation maintenance free GI Earthing System comprising of 50mm die and 2 mtr. long earth electrode of low carbon steel rod with 1100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp | 1 | No | |
| 281 | 84.06 | F) SURDGE PROTECTION: Supply and insallation cabinet Type Class 1 and 2 Combined Model SPD to arrest surges and overvoltages in the power line due to lighning switching action etc. they must be installed in the incoming MCC panel / DB of ther espective buling in paraller to the power circuit. Model: PSV4 -L2.s/4o0TT (3 phase power network) | 1 | No | |
| 282 | 85 | Supply and erection and commissioning of 400A dust and Vermin proof floor mounting cubical type panel Board of size not less than (size 7ft x 6ft x 1.5ft) made up of 16 SWG CRCA sheet steel for outer body and stiffness doors and switches supports and supply and fixing of folowing inter mounting switches with centre bus bar chamber and vertical rows of switches one over the other on both sides of bus bar chamber with cable adopter chamber at the extreme end of both sides with two coats of quality paint over the coat of red oxide primer superscription of incoming and outgoing feeder cable, detail and 2nos metallic danger board | |||
| 283 | 85.01 | complete mounted on base channel (3\" X1.5\" X 0.5\")iron frame work support with following switches confirming to IS specification.1. 400A TPN swich disconnector fuse interior only with HRC fuses double break-1No incomming. 2. 315A TPN swich disconnector fuse interior only with HRC fuses double break-1No outgoing 3. 63A TPN Switch disconnector fuse interior only with HRC fuses double break-6Nos outgoing 4. 32A TPN Swich disconnecor fuse interior only with HRC fuse double break-2Nos outgoing. A separate cbamber on top of one side should be build with 0-500V voltmeter, 0-400A ammeter, CT coil ,selector switches with one set of LED pilot Lamp with fuse base& top with 10A HRC link for 3phases. | 1 | No | |
| 284 | 86 | Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) SD 139\n | 20 | No | |
| 285 | 87 | Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour SD 61 | 350 | RM | |
| 286 | 88 | Supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour SD 63 | 100 | RM | |
| 287 | 89 | Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting SD 87\n | 60 | No | |
| 288 | 90 | Supply and fixing of 1200mm (48\") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\") SD 106\n | 30 | No | |
| 289 | 91 | Supply and fixing of louvers shutters arrangements for 300mm (12\") sweep (light duty) AC exhaust fan etc SD 117\n | 12 | No | |
| 290 | 92 | Supply and laying of 2 pair Unarmoured 0.5mm Telephone Cable | 200 | RM | |
| 291 | 93 | Supply and laying of 4 pair Unarmoured 0.5mm Telephone Cable \n | 200 | RM | |
| 292 | 94 | Supply of 8 port LAN NETWORK SWITCHES Fully Managed 10 / 100 / 1000 Layer-2 with 1G Uplink | 4 | No | |
| 293 | 95 | Supply of 24 port LAN NETWORK SWITCHES Fully Managed 10 / 100 / 1000 Layer-2 with 1G Uplink \n | 4 | No | |
| 294 | 96 | Supply and fixing of powder coated vermin proof Electrical service connection box made of 16 SWG CRCA sheet steel of size 54\"x16\"x10\". The box should have three compartments partitioned top to bottom. The top compartment should have fitted with hylem sheet with neutral link for fixing EB energy meter.The middle compartment to be fitted with 3 No of 200 Amps, 415V porcelin fuse carrier and bottom compartment fitted with 200 Amps MCCB etc. The Box to be provided with twin earthing by using suitable copper wire. The rate includes all material and labour charges for fixing work.Local Rate | 1 | No | |
| 295 | 97 | Supply and fixing of 3 Star Rated 1.5 tonn capacity wall mounted type split Air condition machine unit matching air cooled condenser with Rotary compressor,3 running metre Refrigerant piping between indoor and outdoor units with suitable supports and clamps .The air condition machine should be of reputed make such as Voltas,carrier,Bluestar etc with energy efficient rating star.The rate should include angle support for mounting the split condensing unit and machine lnstallation charges. | 10 | No | |
| 296 | 98 | Supply and fixing of 3 Star Rated 2.0 tonn capacity wall mounted type split Air condition machine unit matching air cooled condenser with Rotary compressor,3 running metre Refrigerant piping between indoor and outdoor units with suitable supports and clamps .The air condition machine should be of reputed make such as Voltas,carrier,Bluestar etc with energy efficient rating star.The rate should include angle support for mounting the split condensing unit and machine lnstallation charges. | 2 | No | |
| 297 | 99 | Supply and installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay relay (V-Gurad / Equivalent) | 8 | No | |
| 298 | 100 | Supply and fixing of 63A TPNMC switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing SD 165\n | 2 | No | |
| 299 | 101 | Supply and fixing of 100A TPN sheet double break switch with HRC fuse and neutral on suitable angle iron frame work with MS cable entry boxes and with PWD earthing SD 168\n | 2 | No | |
| 300 | 102 | Supply and installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay relay (V-Gurad / Equivalent) Etc Complete | 10 | Nos | |
| 301 | 103 | Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay (V-Gurad / Equivalent) | 2 | Nos | |
| 302 | 104 | Supply and laying of 5/8\" and 3/8\" copper pipe (Extrabeyond 3 metres supplied with AC unit) | 12 | Nos | |
| 303 | 105 | Supply and fixing of MS stand for fixing AC outdoor unit etc complete | 12 | Nos | |
| 304 | 106 | Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications | 8 | Nos |
AI Tender Summary
Tender Timeline
Dec 12, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJan 11, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 12, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender