Supply And Fixing Of Led Light , Painting Of Pole Supply , Installation , Testing And Commissioning Of 2 No 16M High Mast Light , Cabling Work At Smy Govardhan ( Mathura ) .
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Dec 2020
0 days left
EMD
1.21 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Govardhan → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply And Fixing Of Led Light , Painting Of Pole Supply , Installation , Testing And Commissioning Of 2 No 16M High Mast Light , Cabling Work At Smy Govardhan ( Mathura ) .
BOQ
| Name of Work: Supply and Fixing of LED light, Painting of pole Supply , Installation , Testing and commissioning of 2 No 16M high mast light, cabling work at SMY Govardhan (Mathura). | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply and wiring of submain with 4 nos 2.5 sqmm and 2 Nos 1.5 sqmm FRLSH pvc insulated multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer incharge. SI No 291(Q) | BI01010001010000000000000515BI0100001113 | 40 | M |
| 2 | 2 | Supply and fixing of change over switch on angle iron frame, including the cost of labour, T&P painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. 100Amp. Four pole on 40mm x 40 mm x 6 mm angle iron frame. SI No 378. | 1 | 1 | Nos |
| 3 | 3 | Supply and fixing of single unit LED aviation obstruction light complete with transformer and LED spiral etc complete in all respect. CAT AAA SI No 409.\n | BI01010001010000000000000515BI0100001115 | 2 | Nos |
| 4 | 4 | Supply and laying of aluminum conductor, PVC insulated armored served sheathed cable 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all round and protected with burnt brick on sides and on top. On surface, the cable run shall be fixed on M.S. clamps etc. ofsuitable sizes or as directed by the E/I complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc. 25 sq mm 3 ½ core SI No 501(J) | BI01010001010000000000000515BI0100001116 | 50 | M |
| 5 | 5 | Supply and laying of aluminim conductor PVC insulated armored, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq mm 4core SI No 501(i) | BI01010001010000000000000515BI0100001117 | 240 | M |
| 6 | 6 | Supply and fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads insulated with tap and making connection etc. complete in all respect as per direction of E / I. 25 Sq mm SI No 504(e) | BI01010001010000000000000515BI0100001118 | 4 | Nos |
| 7 | 7 | Supply and fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads insulated with tap and making connection etc. complete in all respect as per direction of E / I. 16 Sq mm SI No 504(d) | BI01010001010000000000000515BI0100001119 | 16 | Nos |
| 8 | 8 | Supply and fixing of 100 mm x 110 mm x 80 mm pin insulator including G.I. bolts spindle nuts etc. complete in all respects.SI No 621 | BI01010001010000000000000515BI0100001120 | 10 | Nos |
| 9 | 9 | Supply and erection of ‘D’ clamps of 50 mm x 6 mm flat iron on steel tubular poles/steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. SI No 623 | BI01010001010000000000000515BI0100001121 | 20 | Nos |
| 10 | 10 | Suppy and erection of overhead line with ACSR conductor on poles/service bracket including binding etc.complete in all respects. SI No 627 | BI01010001010000000000000515BI0100001122 | 32 | Kg |
| 11 | 11 | Painting of the electric pole with 2 coats of aluminiuin paint over red oxide primer complete in all respects SI No 634 | BI01010001010000000000000515BI0100001123 | 30 | Nos |
| 12 | 12 | Supply and fixing of 16M high mast shaft of approved make with raising system hot dip galvanized inside & out side having pole sheet thickness 3mm top dia minimum 150 mm, bottom dia minimum 360mm, base plate 32mm thick, suitable for wind velocity as per IS 875part 3 and having no circumferential weld with accessories for high mast such as head frame suitable for 6 to 12 luminaries and its control gearboxes, 1.5 HP Power tool motor, 3 point suspension with steel wire rope 6mm dia double drum winch including making suitable foundation as per manufacture drawing and site requirement along with foundation bolts, nuts, washers, anchor plates etc complete in all respect as per direction and satisfaction to the engineer incharge. SI No 652 | BI01010001010000000000000515BI0100001124 | 2 | Nos |
| 13 | 13 | Supply and fixing of electronic fan regulator(Modular) 120-280 V ISI Marked on the existing switch board including making connection, required, materials, labour T/P for proper completion of work to the satisfaction of engineer in charge of work. SI No 1203(C)Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20 mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect. SI No 703 | BI01010001010000000000000515BI0100001125 | 4 | Nos |
| 14 | 14 | SSupply and laying of 25mmx3mm GI strip from earth electrode directly in the ground as required complete in all respect. SI No 716 | BI01010001010000000000000515BI0100001126 | 12 | M |
| 15 | 15 | Supply and erection of 200 A TPN rising mains complete with top end cover plate etc on angle iron wall bracket complete in all respect. SI No 907 | BI01010001010000000000000515BI0100001127 | 1 | R/M |
| 16 | 16 | Supply and fixing of following capacity of automatic street light Cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuse, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 25A TPN. SI No 807(e) ii | BI01010001010000000000000515BI0100001128 | 2 | Nos |
| 17 | 17 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser/Reflector with driver set suitable for 110 to 130 watt confirming to IP66 Protection having company LOGO engraved complete in all respect including labour.12100-14300 System lumens high power LED with lenses.>110 lm / w,PF > 0.95, THD< 10% at full load, CRI>70, potted driver set( not circulatory), phase to phase protection at 440V &>300V auto cut and restart feature, with five years warrantee. CAT-AAA.SI No 1424 | BI01010001010000000000000515BI0100001129 | 15 | Nos |
| 18 | 18 | Supply and fixingof factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 170 to 200 watt. Confirming to IP 65/ 66 protection complete in all respect including labour.18700-22000 System lumens high power LED with lenses.>110 lm / w,PF > 0.95, THD< 10% at full load, CRI>70, potted driver set( not circulatory), phase to phase protection at 440V &>300V auto cut and restart feature, with five years warrantee. CAT-AAA. SI No 1455 | BI01010001010000000000000515BI0100001130 | 16 | Nos |
AI Tender Summary
Tender Timeline
Dec 09, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedDec 29, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 30, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender