Repair And Maintenance Of Office Building At Udyamita Vikas Sansthan , Amaushi , Lucknow
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Dec 2020
0 days left
EMD
56500
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KANPUR → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Maintenance Of Office Building At Udyamita Vikas Sansthan , Amaushi , Lucknow
BOQ
| Name of Work:REPAIR AND MAINTENANCE OF OFFICE BUILDING AT UDYAMITA VIKAS SANSTHAN, AMAUSHI, LUCKNOW | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR : 13.91) | 6872 | Sqm | |
| 2 | 2 | Dismantling existing plaster including disposal of refuse as directed by Engineer in charge with in a distance of 60 meters (SI No 706) | 687.2 | Sqm | |
| 3 | 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm (DSR 15.23.1) | 194.9 | Sqm | |
| 4 | 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.(PWD Sch 692) | 10.4 | Cum | |
| 5 | 5 | Dismantling cement concrete or granolithic floors, inluding base concrete and stacking of dismantled materials as directed by Engineer-in-charge with in a distance of 60mts. (PWD Sch 697) | 79.86 | Sqm | |
| 6 | 6 | Dismantling of WC pan, Cammode, squating plate, urinal, wash basin etc including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (DSR 14.82) | 32 | Nos | |
| 7 | 7 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (DSR 15.52) | 11 | Nos | |
| 8 | 8 | Dismantling GI pipes including stacking of pipes with in 50mts lead as per direction of Engineer-in-charge. (DSR 15-44.1) | 77 | Rmt | |
| 9 | 9 | Dismantling CI pipe including stacking of pipe & lead at site with in 50mts lead as per direction of Engineer-in-charge. (DSR 15-45.1) | 36 | Rmt | |
| 10 | 10 | Dismantling doors and windows leaves including stacking of materials as directed by the Engineer incharge with in a distance of 50mts. (PWD SI No. 704) | 59.325 | Sqm | |
| 11 | 11 | Dismantling doors and windows chawkhats with holdfast including stacking of materials as directed by the Engineer incharge with in a distance of 50mts. (PWD SI No. 703) | 17.325 | Sqm | |
| 12 | 12 | Providing and laying cement concrete 8:4:1 [Stone ballast 8 (40mm normal size) : 4 sand : 1 cement] and curing etc all complete. (SI No. 281) | 7.99 | Cum | |
| 13 | 13 | First class brick work in 1:4 cement & coare sand mortar in super structure in 4.5\" thick wall including cost of all material labour T&P and curing work complete (PWD Sch 305b+309+310+310a) | 6.43 | Cum | |
| 14 | 14 | RCC works with cement approved coarse sand 20mm guage approved stone ballast in the proporation of 1:2:4 in lintels, Raft foundation and footing excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and including necessary centering and shuttering etc and also including supply of all materials, labours, T&P etc required for proper completion of works. (SI No. 283) | 0.26 | Cum | |
| 15 | 15 | MS or iron work in plain work such as reinforced concrete wrought to required shape as necessary including bending for proper completion of the work. (SI No. 504) | 0.305 | Qtl | |
| 16 | 16 | 12mm thick plaster with cement motor consisting of 1 part of cement and 4 part of coarse sand including supply of all materials, labours, T&P etc required for proper completion of work. (PWD Sch 584) | 831.8 | Sqm | |
| 17 | 17 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (NS/DSR 13.80) | 6872 | Sqm | |
| 18 | 18 | Wall painting with plastic emulsion paint of approved brand (Asian, berger or equivalent) and manufacturer to give an even shade. Two or more coats (1st quality) (PWD/DSR 13.60.1) | 5835.6 | Sqm | |
| 19 | 19 | Finishing wall with premium arylic smooth exterior paint of approved brand (Asian, berger or equivalent) and manufacturer with silicone additives of required shade. (Two or more coat) (PWD/DSR : 13.47.1) | 1036.4 | Sqm | |
| 20 | 20 | Supply & fixing 5mm thick China white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortor finished with white cement slurry jointing and polishing complete including supply of all materials labour and T&P etc required for completion of the work. (SI No. 628) | 382.3 | Sqm | |
| 21 | 21 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.21.1) | 37.8 | Sqm | |
| 22 | 22 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm (DSR 9.96.1) | 40 | Nos | |
| 23 | 23 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm (DSR : 9.97.1) | 20 | Nos | |
| 24 | 24 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm (DSR : 9.100.1) | 40 | Nos | |
| 25 | 25 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper (DSR : 9.101.2) | 20 | Nos | |
| 26 | 26 | Removing paint or varnish with paint remover or caustic soda, including supply of all materials, labours, T&P etc required for proper completion of work. (PWD Sch 657) | 424.44 | Sqm | |
| 27 | 27 | Painting or varnishing or iron or wood work with one coat of priming paint & two coat of approved superior quality ready mixed paint including supply of all materials, labours, T&P etc all complete. (PWD Sch 641+642) | 690.552 | Sqm | |
| 28 | 28 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 14.5.2 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) (DSR : 14.5.2) | 127.3 | Sqm | |
| 29 | 29 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P . brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (DSR : 21.1.2.3) | 138.6 | Kg. | |
| 30 | 30 | Providing and fixing 4 mm thick ACP sheet in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. (A/R-1) | 17.325 | Sqm | |
| 31 | 31 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. (DSR 8.6) | 2060.1 | Sqm | |
| 32 | 32 | Labour charges for removing burrs, cleaning with wire brushes, pock making with pointed tools etc of floors including T&P etc required for proper completion of work. (A/R-2) | 1706.8 | Sqm | |
| 33 | 33 | 40mm thick 1:2:4 plain cement concrete floor with cement, approved coare sand and 20mm grade approved stone grit laid in panel finished with floating coat including all materials, labours, T&P etc all complete (PWD Sch 505) | 1706.8 | Sqm | |
| 34 | 34 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (DSR : 14.91.1) | 1706.8 | Sqm | |
| 35 | 35 | Water Supply & Sanitary work : | |||
| 36 | 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work (Exposed in wall) (DSR 18.7.4) 32mm nominal outer dia pipe | 25 | Rmt | |
| 37 | 37 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. : Concealed work, including cutting chases and making good the walls etc. (DSR 18.8) | |||
| 38 | 38 | 25mm Nominal outer dia pipes | 565 | Rmt | |
| 39 | 39 | 20mm Nominal outer dia pipes | 78.5 | Rmt | |
| 40 | 40 | Providing and fixing of following dia U-PVC pipeType-B Supreme class ISI marked pipe lines : | |||
| 41 | 41 | 110mm dia | 61.4 | Rmt | |
| 42 | 42 | 75mm dia | 23 | Rmt | |
| 43 | 43 | Providing and fixing SWR PVC plain bend of required degree. | |||
| 44 | 44 | 110mm dia | 19 | Nos | |
| 45 | 45 | 75mm dia | 10 | Nos | |
| 46 | 46 | Providing and fixing SWR PVC junction Tee of required degree. | |||
| 47 | 47 | 110mm dia | 21 | Nos | |
| 48 | 48 | 75mm dia | 8 | Nos | |
| 49 | 49 | Providing and fixing of SWR PVC Nahani trap etc all complete. | 34 | Nos | |
| 50 | 50 | Providing and fixing of SWR PVC Gully/P- trap etc all complete. | 6 | Nos | |
| 51 | 51 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (DSR 17.1.1) | 4 | Nos | |
| 52 | 52 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (DSR 17.2.1) | 8 | Nos | |
| 53 | 53 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 580x380x350 mm with waste fitting as per IS : 2556, including cutting and making good the walls and floors wherever required. (A/R-3) | 15 | Nos | |
| 54 | 54 | Providing and fixing CP brass Towel rail 750x20mm long with bracket etc all complete. (A/R-4) | 9 | Nos | |
| 55 | 55 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. (DSR 17.7.2) | 9 | Nos | |
| 56 | 56 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (DSR 17.8) | 3 | Nos | |
| 57 | 57 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge. (DSR 17.16A) | 8 | Nos | |
| 58 | 58 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR 17.31) | 9 | Nos | |
| 59 | 59 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. : (DSR 18.51.1) 15 mm nominal bore | 16 | Nos | |
| 60 | 60 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (DSR 18.53.1) 15 mm nominal bore | 36 | Nos | |
| 61 | 61 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17.1) | 5 | Nos | |
| 62 | 62 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15mm nominal bore (DSR 18.21.2.1) | 36 | Nos | |
| 63 | 63 | Providing and fixing Soap dish make Jaquar, ESSCO, cera, hindware or equivalent make etc all complete. (A/R-5) | 9 | Nos | |
| 64 | 64 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR : 18.48) | 1000 | Ltr. | |
| 65 | 65 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore (DSR 18.13.1) | 10 | Nos | |
| 66 | 66 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter (DSR : 19.21.1) | 5 | Nos | |
| 67 | 67 | Constructing brick masonry manhole in cement mortar 1:4 with R.C.C. top slab with 1:2:4 mix , foundation concrete 1:4:8 mix, inside plastering 12mm thick with cement mortar 1:3 finished with floating coat of neat cement and making channels in cement concrete 1:2:4 finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : (DSR 19.7.1) | 6 | Nos |
AI Tender Summary
Tender Timeline
Dec 09, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedDec 21, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 22, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender